Welcome! Please use the navigational links to explore our website.
All Manufacturers
All Models
(800) 853-2651
Tractor Parts
Engine Kits
Carburetors
Salvage
Manuals
DVDs
Hats
Contact Us
Shipping Rates
Return Policy
Ordering Help
Company Info
Parts Warranty
Forums
Store
>
Tractor Parts
>
Ferguson
Ferguson TEA-20 Tractor Parts
[
Categories
] [
All Ferguson Models
] [
Print
]
Brakes
Brake Adjuster Assembly
- Brake Adjuster Assembly. This part measures 4 1/4 inches at it's shortest length, fully screwed together. If you need a shorter one, the threaded side can be cut to make a shorter piece. Also can replace early type brake adjusters. Fits TEA20, TEF20, TO20, TO30, TO35, FE35, 165 UK, 178, 240, 50F, 50H, 60H, 35 UK. Replaces 1850213M91.
(Item #: 166242, Ref: 1850213M91)
$25.00
Brake Anchor Spring
- This Brake Anchor Spring is 4 inches overall length, has a 2-3/8 inch coil length and 5/8 inch coil diameter. It is used on the following Ferguson and Massey Ferguson tractors: FE35, TEA20, TEF20, 135 UK, 165 UK, 178, 231, 240 175 UK, 20D, 50F, 50H, 60H, MF 35 UK. Replaces original part numbers 825064M1 and 1890319M1
(Item #: 178056, Ref: 957E2036)
$2.40
Brake Drum Retaining Screw
- This Brake Drum Retaining Screw Measures 1/2 -13 NC x 3/4 inches. Four are used per tractor, sold individually. If you order 1, you are only going to get one screw. It is used on the following with shoe style brakes: 2200, 2135, 3165, 20C, 20D, 30, FE35, TE20, TEA20, TO20, TO30, F40, TO35, 130, 20, 202, 204, 35, 135, 148, 150, 230, 231, 240, 245, 340, 35, 50, MH50, 550. It is used with 827707M5 Break Drum. Replaces: 182278M1, TO1127.
(Item #: 125739, Ref: 182278M1)
$2.00
Brake Lining Kit
- Kit includes 4 Linings and 48 rivets. Fits TE20, TEF20, TEA20.
(Item #: 105701, Ref: 3620602M91)
$35.00
Brake Plate
- This Brake Plate us used on multiple Massey Ferguson Tractors. Replaces 827143M91, 825040M1, 825040M2, 825041M1, 825041M2, 827143M92, 827143M94, 827143M95, 827143M96, 897042M1, 897042M2, 87089998.
(Item #: 105639, Ref: 827143M95)
$188.00
Brake Shaft, Bushing
- 1-3/8 inch x 1-1/2 inch x 1-7/16 inch. For tractor models TE20, TO20, TEA20, TO30, TO35, FE35, F40, 1080, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 35, 50.
(Item #: 150915, Ref: 180801M1)
$4.66
Brake Shoe Set
- Includes 2 shoes with linings. 2 inches wide. One wheel set. Tractors: 135 UK, 148, 158 Indust/Const, 165 UK, 175 UK, 178 UK, 20 Indust/Const, 20C Indust/Const, 20D Indust/Const, 230, 231, 240, 240P, 240S, 241, 340, 35 UK, 35X, 50 Indust/Const, 50B Indust/Const, 50D Indust/Const, 50F Loader, 50H Loader, 50HX Loader, 550 UK, 60 Loader, 60H Loader, 65, FE35, TE20, TEA20, TED20, TEF20. Replaces Massey Ferguson: 1810348M91, 1810517M1, 1810517M92, 3620602M91
(Item #: 179590, Ref: 1810517M91)
$115.70
Clutch
Clutch Alignment Tool
- Clutch alignment tool for 1 3/8 inch 10 spline disc and .67 inch pilot hole. For tractor models: TO20, TE20, TEA20, TO30, TO35.
(Item #: 119892, Ref: 1112-5996)
$8.15
Clutch Alignment Tool
- Clutch alignment tool for 5/8 inch Pilot, 1st stage 1 1/8 inch with 10 splines, 2nd stage 1 3/4 inch with 10 splines.
(Item #: 114714, Ref: 1212-1600)
$24.00
Clutch Disc
- Clutch disc measuring 9 inches with a 1 3/8 inch hub and 10 splines. This is a 6 spring clutch. For the following tractors using Continental Gas engine: TE20, TEA20, TO20, TO30, 202, 203, 205, 20C, 50C. Replaces OEM 180241M91.
(Item #: 111601, Ref: 91A7550WHD)
$36.60
Clutch Disc, 9 Inch
- Clutch disc is 9 inches in diameter with 10 splines on a 1 1/8 inch hub. Used on models 135, 2135, 35, 50, TO35, TE20, TEA20, TO20, TO30, Colt, Mustang, Massey Harris 22, Massey Harris 30 with single clutch. Replaces 760260M91, 180241M91, 180250M91, 181114M91, 193621M91, 825495M91
(Item #: 119397, Ref: A44512)
$45.00
Clutch Disc, Remanufactured, 180241M91
- For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 35, 50, 135, Compatible with Massey Ferguson Construction and industrial models 202, 203, 2135, Replaces Massey Ferguson OEM number 180241M91, 180250M91, 181114M91, 183357M91, 193621M91, 825495M91, Clutch Size: 9", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 4 Reg Pads,
(Item #: 206747)
$116.00
Clutch Disc, Remanufactured, 180241M91
- For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, Replaces Massey Ferguson OEM number 180241M91, 180250M91, 181114M91, 183357M91, 193621M91, 825495M91, Clutch Size: 9", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 4 Reg Pads,
(Item #: 206760)
$105.01
Clutch Housing and Related Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability. (1)= p/n 183129M2 or 886727M4, (2)= p/n 886673M1, 195503M1, (3)= p/n 1867223M1, (4)= p/n 180434M1, (5)= p/n 195494M1, (6)= p/n 180444M2 or 1679460M1, (7)= p/n 180449M1, (8)= p/n 184592M1, (9)= p/n 180801M1, (10)= p/n 180511M2, (11)- p/n 195523M1.
NOTE
Clutch Kit
- Clutch Kit contains 181114M91 drive disc that measures 9 inch outside diameter with 1 1/8 inch 10 spline hub, 183209M91 9 inch single pressure plate, 832960M3 pilot bearing, and 195207M1 release bearing and 10 spline x 1 1/8 inch pilot tool. Will not fit on input shaft with 1 3/8 inch 10 Spline end. Note: for TO35 see part number 833085M2 bearing, you may need kit 184827. Replaces 1800263M91, 180263M91, 181114M91.
(Item #: 119387, Ref: 1212-1610)
$175.10
Clutch Kit
- Our new 9 inch complete clutch kit contains: a 9 inch 3 finger, 6 spring pressure plate assembly (183209M91), a 9 inch, 10 spline, 1 3/8 inch hub clutch disc (180250M91), new release bearing (195508M1), new pilot bearing (828123M2), and clutch alignment tool. For tractor models 135, 2135, 35, 50, MH22, MH22K, TE20, TEA20, TO20, TO30.
(Item #: 113484, Ref: 1212-6001)
$154.50
Clutch-Pressure Plate
- Fits on model TEA20 with 80mm or 85mm gas engine.
(Item #: 172898, Ref: S.60692)
$90.96
Clutch-Pressure Plate
- 9 inch single standard clutch, 3 lever, bolt pattern is evenly spaced. TEA20, TE20.
(Item #: 119390, Ref: 185923M91)
$146.30
Clutch Release Bearing Spring
- Two used per tractor, sold individually. .627 inch outside diameter, 4.875 inch overall length and .095 inch wire diameter. For tractor models: TE20, TEA20, TO20, TO30. Replaces TO7562, 181622M1.
(Item #: 121564, Ref: 9N7562)
$6.86
Clutch Release Carrier Fork Locking Screw
- This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1
(Item #: 182943, Ref: 881144M1)
$3.60
Clutch Shaft, Bushing
- 1 inch x 1-1/16 inch x 3/4 inch. For tractor models TE20, TO20, TEA20, TO35, FE35, F40. Replaces 1321, 184592M1, 180802M1, 184 592M1
(Item #: 165433, Ref: 184592M1)
$3.50
Pressure Plate Assembly, Remanufactured
- For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 50, 135, 202, 203, 2135, Pressure Plate Size: 9", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage,
(Item #: 206882)
$95.01
Pressure Plate Assembly, Remanufactured, 180263M91
- For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 35, 50, 135, 202, 203, 2135, Replaces Massey Ferguson OEM number 180263M91, 185923M91, Pressure Plate Size: 9", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 119390,
(Item #: 206881)
$111.01
Release Bearing
- Release bearing for tractor models 101 Jr and Sr, 135 Special, 20, 201, 202, 203, 203G, 205, 20C, 2135, 298, 303D, 303G, 35, 44, 44D, 44K, 44LP, 50, 50C, 510, 540, 550, F40, MH20, MH30, TE20, TEA20, TO20, TO30. Transmission disc release bearing. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces original part numbers 18171A, 195207M1.
(Item #: 107007, Ref: N1087)
$20.00
Cooling System
No
Picture
Fan Belt
- For tractor models (TEA20 with Standard motors 80, 85mm gas), (FE35 with Standard motors 87mm gas engine). Replaces 629004M1.
(Item #: 182555, Ref: 641696M1)
$10.20
Fan Blade
- Replaces 825181M91. 15 1/2 inch diameter fan fits: (35, 50 both with Perkins Diesel), (TE20, TEA20 both with 80, 85, or 87mm Gas), (TO35 with 23C Diesel), (FE35 with 87mm Gas or 23C Diesel). Fan Blade, trapezoidal bolt pattern. Bolt pattern 1 1/4 inch between top holes, 1 1/2 inch between bottom holes, 5/16 inch holes with 1 1/8 inch center cutout.
(Item #: 121692, Ref: 186819M91)
$28.76
Radiator
- For tractor models TE20, TEA20, TO20, TO30, Z120, Z129, Z134 gas engines. Will fit the late TO35 after serial number 204182. This radiator has 5 fins per inch and 3 rows of tubes. It is 17.312 inches tall and the core size is 15.062 inches wide. This radiator fits multiple Massey Ferguson Tractor models. (NOTE: replaces VPE3033, 181623V1) Top mounting bracket is centered. Uses cap part number 180224M91.
(Item #: 101791, Ref: 181623M1)
$237.00
Radiator
- For Massey Ferguson tractor models TE20, TEA20, Replaces Massey Ferguson OEM number 9583, 9585, Core Height: 17.55", Core Width: 15", Core Thickness: 2.08", Rows: 3,
(Item #: 162337)
$215.30
Radiator Cap
- Radiator Cap for Models: TE20, TEA20, TEF20 Standard Motors 80, 85mm Gas.
(Item #: 169633, Ref: 825702M2)
$11.00
Radiator Drain Tap
- 1/2 inch UNF thread. For tractor models FE35, TEA20, TED20, TEF20, 135 UK.
(Item #: 172276, Ref: 828085M1)
$28.70
Radiator Hose, By-Pass
- For tractor models TEA20, TED20 with 80 or 85mm Engine.
(Item #: 159587, Ref: 825684M1)
$5.50
Radiator Hose, Lower
- 1.375 inch inside diameter. For tractor models (TEA20 with 80mm or 85mm Engine), (TED20 with 85mm Engine).
(Item #: 159586, Ref: 825657M1)
$7.90
Radiator Hose, Upper
- For tractor models TEA20 with Standard motors 80, 85mm gas engine.
(Item #: 185167, Ref: S.40014)
$16.90
Thermostat,180 Degree
- For: F40, FE35, TEA20, 150, Deluxe, TO35, 1080, 1085, 1100, 1105, 1130, 1135, 130, 135, 148, 150, 154, 1545, 165, 168, 175, 187, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20E, 2135, 2200, 2244, 230, 235, 240, 245, 250, 2500, 253, 254, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 30H, 320, 35, 350, 35X, 360, 362, 40, 40E, 4500, 470, 4830FC. Replaces 1446165V91, 1446127M1, 1446165M1, 1446127V91, 2485648, 1894961M1, 2485659, 325505M2, 32550, 1446165M91, 1446127M91, 2485666, 40085, 826306M1, 828139M1, 886000M1
(Item #: 110084, Ref: 1446165M91)
$7.90
Thermostat Housing
- Thermostat housing for Standard 85mm Gas Engine in: TEA20 (serial number 112391 and above). Uses thermostat part number 1446165M91.
(Item #: 179569, Ref: 200781)
$75.17
Thermostat Housing
- Thermostat housing for model TEA20 with 85mm Gas Engine. Uses thermostat part number 1446165M91.
(Item #: 179569, Ref: 825453M1)
$75.17
Water Pump Hub
- Hub only. Fits (TEA20 Standard Motors 80, 85mm Gas), (TEF20 Standard Motors 20C Diesel), (FE35 Standard Motors 87mm Gas, 23C Diesel), (TO35 Standard Motors 23C Diesel).
(Item #: 182613, Ref: 825377M1)
$28.63
Water Pump Pulley
- For tractor models (TEA20 with Standard Motors 80 or 85mm Gas Engines), (FE35 with Standard Motors 87mm Gas Engine).
(Item #: 182838, Ref: 825378M91)
$35.34
Water Pump, Remanufactured, Z120K305
- For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, Replaces Massey Ferguson Casting number Z120K305, Includes mounting gasket,
(Item #: 206974)
$71.01
Water Pump Seal
- For models TEA20 with Standard Motors 80 or 85mm Gas Engines, FE35 with Standard Motors 87mm Gas or 23C Diesel Engines, TO35 with Standard Motors 23C Diesel Engine. Replaces 1446130M1.
(Item #: 180661, Ref: 825374M1)
$13.67
No
Picture
Water Pump Sealant
- RTV Blue 3.35 oz. tube.
(Item #: 178141, Ref: PRM77BR)
$10.31
Water Pump, Standard Engines
- Water Pump for 135 UK, FE35, TO35, TEA20, TED20, TEF20, FE20 with STANDARD DIESEL or GAS ENGINES. Water Pump REPLACES 1885489M92-R, 110779, DA10779. Casting number 1881805M91.
(Item #: 116837, Ref: 1885489M92)
$45.00
Decals and Emblems
Front Hood Emblem
- For tractor models TO20, TE20, TEA20, TO30. Front Hood Emblem. Chrome with blue background "Ferguson-Rectangle".
(Item #: 104109, Ref: R1967)
$32.50
Hood Side Emblems
- For TO20, TE20, TEA20. Hood side emblem Pair for left and right side. Chrome "Ferguson". Requires (3) 1/8 inch holes be drilled into hood.
(Item #: 104111, Ref: R1965)
$68.40
Drive Train
6 Speed Transmission Selector and Related Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. *Do not put this part in basket. You must call for application, identification and availability.
NOTE
Axle Bearing Assembly
- 2.00 inch inside diameter. For tractor models: TE20, TEA20, TEF20, TO20, TO30. Assembly includes Cup (3720) and Cone (3795). Replaces 195162M1.
(Item #: 179813, Ref: S.18516)
$46.40
Axle Collar
- This axle collar measures 2 3/4 inches outside diameter, 2 inches inside diameter and 11/16 inches thick. For tractor models TO20, TEA20, TEF20, TED20, TO30. Replaces 181257M1, 181257V1, 890543M1.
(Item #: 112070, Ref: 9N4132)
$13.70
Axle Shim
- This is a Steel Rear Axle Shim. It is .020 inches thick. It is used on Ferguson TEA20, TE20, TEF20, TO20, TO30, TO35, F40, Massey Harris 50, Massey Ferguson 35, 35 UK, 50, 135, 135 UK, 150, 230, 231, 235, 240, 245, 3165, 20, 202, 204, 2135, 20C, 20D, 30. It replaces original part number 183261M1.
(Item #: 178176, Ref: 183261M1)
$3.61
Differential Bearing and Cup
- Fits in Differential Lock. Bearing and cup is used on multiple Massey Ferguson Tractors. Replaces original part numbers: 1850087M91, 1850087M92, 1851533M91, 1851533V91, 185773M1, 185775M1, 185776M1, 1857775M1, 1857776M1, 195159M1, 195159V1, 195160M1, 195160V1, 300975M1.
(Item #: 179801, Ref: 195159M1)
$26.00
Differential Bearing and Cup
- Bearing and cup set Fits multiple Massey Ferguson Models. (159x108x21mm) Replaces 1850849M91, 1850909M91, 185251M1, 185252M1, 185252V1, 3039248M1, 3039249M1
(Item #: 150360, Ref: 185251M1)
$146.00
Differential Planetary Thrust Washer
- Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 3/16 outside diameter and 0.053 inches thick. Used on 1080, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20C, 20D, 20F, 2135, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285, 290, 298, 30B, 30D, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 372, 375, 382, 390, 390T, 398, 399, 50, 550, 565, 575, 590, 595, 65, 675, 690, 698, 698T, 699, 85, 88, Super 90, TE20, TEA20, TED20, TEF20, TO20 Replaces OEM number 181247M1.
(Item #: 173021, Ref: 181247M1)
$9.35
Gasket, Rear Axle Trumpet Housing
- Size is approximately 15-1/4 inches. Fits TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 180, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 2500, 30, 31, 3165, 35, 40, 50, 50, 65.
(Item #: 151916, Ref: 183254M1)
$2.30
Gear Lever Tension Spring
- This Gear Lever Tension Spring is widely used on many Massey Ferguson Tractors. Confirm part number before ordering. Replaces 192007M1, 964894M1, 180582M1
(Item #: 126830, Ref: 180582M1)
$2.80
No
Picture
Gear Shift Knob
- Round ball, 3/8 inch NF thread. For tractor models TO20, TE20, TEA20, TEF20, TO30, TO35, FE35, F40, 130, 135, 150, 165, 175, 20, 202, 203, 204, 205, 2135, 220, 2200, 2500, 30, 302, 303, 304, 30E, 3165, 320, 333, 35, 356, 40, 404, 406, 44, 444, 50, 50A, 50E, 555, 65, 85, 88, 90, Super 90, 95, 98, F40, FE135, MH50, TO35.
(Item #: 150683, Ref: 180006M91)
$4.16
Gear Shift Spring Retainer
- This Gear Shift Spring Retainer is used on many Massey Ferguson Models. Replaces OEM numbers 180583M1, 1861024M1
(Item #: 126687, Ref: 1861024M1)
$16.00
Knob, Gear shift
- Gear shift knob, chrome. For TE20, TEA20, TEF20. Chrome finish. Measures .430 inch hole inside diameter and 1.298 inch overall length. The knob outside diameter measures 0.975 inch. This knob has a .159 inch roll pin hole. Replaces 180006M91.
(Item #: 126528, Ref: S.43765)
$13.00
Oil Seal, Rear Axle, Inner
- OIL SEAL For TO30, TO20, TEF20, TED20, TEA20. This is an inner oil seal for the rear axle. Measures 2 inches x 2 7/8 inches x 0.468 inch.
(Item #: 167308, Ref: 195555M1)
$6.50
Oil Seal, Rear Axle, Outer
- 2-3/8 inch inside diameter, 3-1/2 inch outside diameter, 5/8 inches thick. For tractor models TO20, TO30, TEF20, TED20, TEA20, TE20. This is an outer oil seal for the rear axle. Replaces 890640M1, 195557M1, 195557V1.
(Item #: 126593, Ref: D6NN4251A)
$5.76
Rear Axle Seals and Collar Kit
- Contains: outer axle seal, shrink on collar and inner axle seal. Kit is for 1 axle, 2 required per tractor. For tractor models TE20, TEA20, TEF20, TO20.
(Item #: 182453, Ref: S.42078)
$35.89
Rear Differential and Related Components - Please use diagram to match parts to tractor models. Parts must be ordered by phone. (SPA)
NOTE
Rear Differential and Related Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.
NOTE
Shift Lever Locking Pin
- This Shift Lever Locking Pin is used on Ferguson, Massey Harris and Massey Ferguson applications. It replaces OEM part numbers 180581M2, 1678440M1, 180581M1
(Item #: 183009, Ref: 1678440M1)
$1.10
Side Cover Gasket
- This Side Cover Gasket fits the multiple Ferguson and Massey Ferguson tractor models as a side cover gasket and a PTO shift cover gasket. It replaces original part numbers 181217M3, 181217M1, 181217M2, 181217M4, 181217M5, 181217M6, 3816331M92, 181217V3, 3816331T92.
(Item #: 112236, Ref: 9N4131)
$0.80
Transmission Bearing
- This is a Transmission Main Shaft Rear Bearing for the Input Shaft. Used on TE20, TEA20, TO20, TO30. Replaces: 195746M1, S9836
(Item #: 118284, Ref: 9N7120)
$87.30
Transmission Fill Plug
- For tractor models TE20, TEA20, TO20, TO30, 35, 40, 50, 135, 231, 240, 250 2135. Replaces 768300M1, 180580M1 and 3799441M2. Plug has a 2.5 inch outside diameter flange.
(Item #: 115163, Ref: 9N7010)
$9.99
Transmission Input Shaft Seal
- This seal fits the following tractor models as a transmission input shaft seal: TE20, TEA20, TO20, and TO30. Replaces part number 195760M1. It has an inside diameter of 1.375 inches, an outside diameter of 2.000 inches, and is 0.337 inches wide.
(Item #: 109957, Ref: 8N7052A)
$5.36
Electrical System
Control Box, 12 Volt
- Control box is for tractors with a generator and Standard Motor gas engines. Replaces OEM numbers: 829951M91, 1050840M91. For tractor models 20E, 240, 275UK, 283UK, 290UK and TE20, TEA20, TO20, TO30, TO35.
(Item #: 172665, Ref: 1890130M91)
$54.25
Distributor
- Complete distributor does NOT accept original distributor components, it uses standard Lucas automotive points, rotor and condenser avalaible at your local auto parts store. THERE IS NO KNOWN ELECTRONIC CONVERSION KIT TO FIT THIS DISTRIBUTOR - NOT EXACTLY LIKE ORIGINAL. For UK Models: TE20, TEA20 with Standard Gas Engines only.
(Item #: 183656, Ref: B4788)
$160.81
Distributor Cap
- This distributor cap ONLY fits our distributor B4788 it will NOT fit original type distributors. For tractor models TE20, TEA20 with gas engines.
(Item #: 183679, Ref: B4789)
$27.53
Distributor Cap, Lucas
- Cap has threaded terminals. Fits LUCAS Distributor on: TE20 (Z120), (TEA20, FE35 and TED20 using 80, 85 or 87mm Standard Engines). For Lucas distributor # 40084E, 40243H. Replaces 829920M1, 829937M1, 415298, DDB163
(Item #: 105561, Ref: 829937M1)
$37.50
Electronic Ignition Conversion Kit, 12 Volt Negative Ground
- For Tractor Models TE20 and TEA20 using LUCAS Distributor. Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt negative ground system.
(Item #: 108302, Ref: LU145)
$179.00
Electronic Ignition Conversion Kit, 12 Volt Positive Ground
- For Tractor Models TE20 and TEA20 using LUCAS Distributor. Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt positive ground system.
(Item #: 108303, Ref: LU145P12)
$194.00
Generator, 12 Volts
- Lucas style replacement, 12 volt, pulley is not included. For tractor models: 135, 148, 155, 158, 165, 168, 175, 178, 185, 188, 35, 35X, 50, 65, FE35, TE20, TEA20, TED20, TEF20. Replaces K908882, 3049871R91, 81806433, ADN10001R, ADN10001, E27N10000, 2871170, 897104M92, 12871182, 37H8231, 22703, 22791, LRD101, 2871170, 2871182, 22703, 22791, LRD101, 897104R92, 897104T, 897104M92, 2871182
(Item #: 113578, Ref: R1192673)
$150.00
Generator Pulley
- This Pulley fits on generator 897104M91. For models TEA20, TEF20, FE35, TO35. 4 1/2 inch diameter. for 1/2 inch belt. Replaces 31141425, 731003M2, 131141425
(Item #: 173298, Ref: 31141425)
$31.00
No
Picture
Ignition Coil - Threaded Terminal - 12 Volt
- For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, Replaces Massey Ferguson OEM number 1015128M91, 1038817M91, 570062M3, 12 Volt coil, Used with Lucas Distributor, Plug wires thread onto terminal,
(Item #: 111201)
$54.01
Ignition Kit, Early Lucas Distributor
- For EARLY LUCAS Distributor on: TE20 (Z120), (TEA20, FE35 and TED20 using 80, 85 or 87 mm Standard Engines. Contains: points, condenser, rotor. NOTE DIFFERENCE IN PICTURE BETWEEN EARLY AND LATE.
(Item #: 178112, Ref: S.42772)
$16.26
Ignition Kit, Late Lucas Distributor
- For LATE LUCAS Distributor on: TE20 (Z120), (TEA20, FE35 and TED20 using 80, 85 or 87mm Standard Engines. Contains: points, condenser, rotor. NOTE DIFFERENCE IN PICTURE BETWEEN EARLY AND LATE.
(Item #: 183896, Ref: S.42773)
$19.47
Ignition Switch
- Ignition Switch with Key. For TE20, TEA20. Replaces OEM numbers 829854M1, 31083B, 312305.
(Item #: 183885, Ref: 829917M1)
$13.50
Point Set, Early Lucas
- POINT SET For TE20, TEA20. Replaces YE12199, 844844R91, 702326R91, 829925M1, 407050
(Item #: 107541, Ref: 829925M1)
$9.20
Resistor
- Ballast resistor used for coil in ignition system. Resistance = .6 ohms. Note: This is NOT used on all ignition systems.
(Item #: 105710, Ref: 8NE10306)
$4.50
Spark Plug Wires
- Original design with screw in ends. For tractor models TE20, TEA20 both with gas engines with Lucas distributors 40084E, 40243H with threaded plug wires. 2 wires at 10-1/2 inches long, 1 wire 14-1/4 inches long, 1 wire 17-3/4 inches long and the coil wire is 9 inches long. Replaces 3044219R93, 181604M91, 181605M91, 825708M91, TO12284.
(Item #: 111200, Ref: B5217)
$30.90
Starter, 12 Volt
- For tractor models 135UK, 35, TEA20, TED20 with Standard Gas Engines (not Continental). Also replaces 25038, 1903125M91, S2532, 25038D. 12 volt system.
(Item #: 115902, Ref: 829803M91)
$330.00
Starter, 6 Volt, Lucas
- REMANUFACTURED, 6-volt, 2 bolt mount, Lucas Type V139, with 9 tooth gear. Fits TE20 and TEA20 (up to serial number 200001) with 80, 85mm Gas Engines and FE35 with 85mm. Also replaces 829803M91. Replaces Lucas 25519, 25519D. This is NOT a Delco Type Starter. This starter is for the ring gear being on the front of the flywheel. If your ring gear is on the rear of the flywheel, you need the Delco Type Starter (see TO20, part number 4858MFGXL). NO RETURNS ALLOWED IF NOSE CONE IS BROKEN. The only reason a starter nose will break is due to: bent armature shaft, ignition timing is incorrect, improper drive-to-ring-gear clearance, or defective electrical causing engine kick back.
(Item #: 829853M91)
$468.34
Starter - Delco Style (4762), Remanufactured, Delco Remy, 1109457, 181541M91
- For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, Replaces Massey Ferguson OEM number 181541M91, 1900347M91, Replaces Delco Remy manufacturer number 1109457, Replaces manufacturer number 140-024, 44-9904, 4762, 74762, 91-01-4448, TS-1377, X74762, Delco Style, Voltage: 6, Rotation: Clockwise, Teeth: 9, For a New version of this sku use Item #: 111068,
(Item #: 203486)
$346.28
Starter Nose Cone
- For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, Replaces Delco Remy manufacturer number 1912435, Replaces Delco Remy Starter number 1109457, Replaces manufacturer number 5640-1011,
(Item #: 112256)
$49.58
Starter Switch
- Switch Assembly with key, for ignition and light. Switch has 3 terminals. For GAS tractors: TE20, TEA20, TO20, TO30, TO35, MF35, MF50, MF65, 202, 203, 204, 205.
(Item #: 111516, Ref: 180681M93)
$18.50
Starter Switch-Gear Stick Operated
- For tractor models TE20 with Z120 and TEA20 with 80mm or 85mm Gas Engines. Also replaces OEM number 76418.
(Item #: 167862, Ref: 829960M91)
$26.00
Tune-Up Kit
- Kit includes Points, Rotor, Condenser and 4 AL425 Spark Plugs. For TEA20, FE35 all with Early Lucas Distributor. Verify correct spark plug size and type
(Item #: 185063, Ref: S.42733)
$32.31
Tune-Up Kit
- Kit includes Points, Rotor, Condenser and 4 AL425 Spark Plugs. For TE20, TEA20, FE35 all with Late Lucas Distributor. Verify correct spark plug size and type
(Item #: 131638, Ref: S.42734)
$31.14
Voltage Regulator
- For model TEA20 and TEF20 with 85mm Gas or 20C Diesel Engine.
(Item #: 172512, Ref: NCB120)
$79.90
Engine Bearings
No
Picture
Main Bearing Set
- Standard. Fits TEA20, TED20, FE35 with Standard Motors 80, 85, or 87mm Gas Engine.
(Item #: 825840M1)
$40.63
Main Bearing Set
- .010. Fits TEA20, TED20, FE35 with Standard Motors 80, 85, or 87mm Gas Engine.
(Item #: 172269, Ref: 825837M1)
$53.90
No
Picture
Main Bearing Set
- .030. Fits TEA20, TED20, FE35 with Standard Motors 80, 85, or 87mm Gas Engine.
(Item #: 173101, Ref: 825983M1)
$70.70
No
Picture
Main Bearing Set
- .040. Fits TEA20, TED20, FE35 with Standard Motors 80, 85, or 87mm Gas Engine. (60936S)
(Item #: 825840M1)
$36.30
No
Picture
Rod Bearing Set
- .040. Fits TEA20, TED20, FE35 with 80, 85, 87mm Standard Motors Gas Engine.
(Item #: S.60932)
$37.88
No
Picture
Rod Bearing Set
- .010. Fits TEA20, TED20, FE35 with 80, 85, 87mm Standard Motors Gas Engine.
(Item #: 173098, Ref: 1810084M91)
$35.60
No
Picture
Rod Bearing Set
- .020. Fits TEA20, TED20, FE35 with 80, 85, 87mm Standard Motors Gas Engine.
(Item #: 173099, Ref: 1810085M91)
$37.80
No
Picture
Rod Bearing Set
- .030. Fits TEA20, TED20, FE35 with 80, 85, 87mm Standard Motors Gas Engine.
(Item #: 173100, Ref: 1810086M91)
$37.80
No
Picture
Rod Bearing Set
- Standard. Fits TEA20, TED20, FE35 with 80, 85, 87mm Standard Motors Gas Engine.
(Item #: 173102, Ref: 1810083M91)
$29.40
Engine Gaskets
Bottom Gasket Set
- Fits TEA20, TED20, FE35 and 85mm Gas Standard Engines. Includes all gaskets below the engines head. (42631S)
(Item #: 173068, Ref: 894915M91)
$16.70
Crankshaft Oil Seal, Front
- Fits tractor models TEA20, TED20, TEF20, TO35, FE35 with Standard 80, 85, 87mm Gas Engines, or 20C and 23C with Diesel Engines.
(Item #: 173065, Ref: 825740M1)
$10.03
Crankshaft Oil Seal, Rear
- 71mm x 95mm x 11.5mm. For tractor models 135, FE35, TEA20, TED20. All with 87mm Standard Gas Engines.
(Item #: 172333, Ref: 825208M1)
$8.80
No
Picture
Crankshaft Seal, Rear
- For tractor models TEA20, TED20, FE35, 135 UK. All using 80, 85 or 87mm Standard Gas Engines.
(Item #: S.41725)
$7.12
Head Gasket, 85mm Gas
- For tractor models TEA20, TED20, FE35. All with Standard 85mm Gas Engine. Replaces 825836M1 and 826250M1.
(Item #: 202084)
$26.94
Oil Pan Gasket
- For tractor models TEA20, TED20, FE35, 135 UK. All using Standard Motors 80, 85 or 87mm Gas Engines.
(Item #: 173165, Ref: 825654M1)
$8.60
Timing Cover Gasket
- Used with 825151M1 timing cover on Standard Gas engines. Replaces 3910265M1, 825649M2, 825649M1
(Item #: 825649M1)
$4.83
No
Picture
Timing Cover Gasket
- For Massey Ferguson tractor models TE20, TEA20, 35, 135, Replaces Massey Ferguson OEM number 825649M1, 3910265M1, 825649M2,
(Item #: 183899)
$5.41
Top Gasket Set
- Fits TEA20, TED20, FE20, FE35 with 85mm Gas Standard Engines, includes head gasket, rocker cover gasket, manifold gaskets, carburetor gasket.
(Item #: 168959, Ref: 501923)
$25.50
No
Picture
Top Gasket Set
- For tractor models TEA20, TED20, FE35 with Standard Motors 87mm 4 Cylinder Gas Engine.
(Item #: 168959, Ref: 827560M1)
$25.50
Upper Gasket Set
- For model TEA20 with 80mm Engine.
(Item #: S.43010)
$45.82
Engine Rebuild Kits
No
Picture
Engine Overhaul Kit, 80MM Standard Gas
- This engine overhaul kit for the 80MM engine contains Sleeves, Pistons, Piston Rings, Piston Pins, Piston Pin Retainers, Main bearings (standard, .010, .020, .030) and Rod bearings (standard, .010, .020, .030) (Specify bearing sizes in comments section when ordering) Crankshaft Seals, full gasket sets. For model TEA20.
(Item #: OK80MM)
$427.80
No
Picture
Engine Overhaul Kit, 85mm Standard Gas
- Major Engine Overhaul Kit. 4 CYLINDER, STANDARD BORE: 3.346 inch (85MM) Includes: pistons, rod bushings, sleeves, rings, pins, retainers, overhaul gasket set, front and rear main seals, main bearings (standard, .010, .020, .030) and connecting rod bearings (standard, .010, .020, .030) Specify bearing sizes in comments section when ordering. For the following tractors: TEA20, TED20.
(Item #: OK85MM)
$400.20
No
Picture
Engine Overhaul Kit, 87mm Standard Gas
- For Standard 87mm Engines with 4 ring pistons. Includes pistons, rings, liners, overhaul gasket set, rear main seal, rod bearings, rod bushings, main bearings and thrust washer kit. Specify bearing size of standard, .010, .020, .030 or .040 when ordering. For tractor models TEA20, TED20, FE35.
(Item #: 87MMOHkit)
$640.17
No
Picture
In-Frame Engine Kit
- In Frame Engine Overhaul Kit. 4 CYLINDER, STANDARD BORE: 3.346 inch (85MM) Includes: pistons, sleeves, rings, pins, retainers, overhaul gasket set and connecting rod bearings (standard, .010, .020, .030). Specify bearing size in comments section when ordering. For the following tractors: TEA20, TED20.
(Item #: IK85MM)
$356.85
No
Picture
In-Frame Engine Kit, Standard Motors 87mm
- In Frame Engine Overhaul Kit. 4 CYLINDER, STANDARD BORE: (87MM) Includes: pistons, sleeves, rings, pins, retainers, overhaul gasket set and connecting rod bearings (standard, .010, .020, .030). Specify bearing size in comments section when ordering online. For tractor models TEA20, TED20, FE35, 35UK, 135UK.
(Item #: 172856, Ref: IK87MM)
$447.60
No
Picture
In-Fram Engine Overhaul Kit, 80MM Standard Gas
- This in-frame engine overhaul kit for the 80MM engine contains Sleeves, Pistons, Piston Rings, Piston Pins, Piston Pin Retainers, Rod bearings (standard, .010, .020, .030) (Specify bearing sizes in comments section when ordering), full gasket sets. For model TEA20.
(Item #: IK80MM)
$355.65
No
Picture
Valve Overhaul Kit, 87MM
- Kit contains intake and exhaust valves, springs and guides. For 88 MM Standard Motors Gas engine in TEA20, FE35.
(Item #: VOK87MM)
$255.30
Engine Parts
Camshaft Sprocket
- (42 tooth). For TEA20, TED20, FE35. Standard 80mm, 85mm, 87mm Gas.
(Item #: 178260, Ref: 825135M1)
$78.70
Connecting Rod Bushing
- For tractor models TEA20, TED20, FE35, 135 UK. All using Standard 80, 85 or 87mm Gas Engines.
(Item #: 825146M1)
$6.23
Crankshaft Sprocket
- 21 tooth. Fits TEA20, TED20, FE35 with 80, 85 or 87mm Standard Gas Engine.
(Item #: 183038, Ref: 825136M1)
$76.34
Governor Cup and Shaft Assembly
- Fits Standard Gas Engines in TEA20, TED20, FE35, 135UK.
(Item #: 167996, Ref: 825157M91)
$30.17
Governor Weight Assembly
- For tractor models TEA20, TED20, FE35 all with Standard Gas Engines 80MM, 85MM or 87MM Gas Engines. Also replaces 825156M1.
(Item #: 112249, Ref: 825890M91)
$44.88
Ring Gear
- This Ring Gear measures 13 3/8 inches inside diameter, 14 5/8 inches outside diameter and has 145 teeth. For model: TEA20 (serial number <200000 with 6 Volt Starter Motor. Replaces VPC4200.
(Item #: 159156, Ref: 825149M1)
$93.00
Starter Ring Gear
- For TE20, TEA20. Starter Ring Gear for 85MM and 87MM Gasoline Engines, 145 teeth. 42422S
(Item #: 159157, Ref: 825452M1)
$80.21
Thrust Washer Kit, STD
- For tractor models TEA20, TED20, FE35, 135 UK. All using either 80mm, 85mm or 87mm Gas Engines. Replaces 825112M1.
(Item #: 182814, Ref: 825111M1)
$21.41
Timing chain
- 58 links. Fits 135 UK, TEA20, TED20, FE35 with 80, 85 or 87mm Standard Gas Engine. (60909S)
(Item #: 182631, Ref: 825199M1)
$29.91
Timing Cover
- This Timing Cover is used on Standard Gas engines. It replaces OEM numbers 825150M1, 825151M1
(Item #: 184747, Ref: 825151M1)
$203.50
Valve, Exhaust
- Exhaust Valve for tractor models FE35, TEA20 with 87mm Standard Gas Engine.
(Item #: 826245M1)
$18.27
Valve, Exhaust
- Exhaust Valve for tractor models TE20, TEA20 with 80mm Standard Motors Gas Engine.
(Item #: 173048, Ref: 825651M1)
$10.30
Valve, Exhaust
- Exhaust valve for model TEA20 with 85mm Gas Engine. Replaces OEM part numbers 825369M1, 100652, 6005029100.
(Item #: 168963, Ref: 825369M1)
$11.53
Valve Guide, Intake
- This Intake Valve Guide is for tractor models TEA20, TED20, FE35 with 80, 85, 87 Gas or 35, TO30 using 23C Diesel Engines.
(Item #: 164339, Ref: 825259M1)
$4.80
Valve, Intake
- Intake Valve for tractor models using STANDARD 87mm Gas Engine.
(Item #: 826244M1)
$16.54
Valve, Intake
- Intake valve for models using STANDARD 80mm or 85mm Gas Engine.
(Item #: 173202, Ref: 825388M1)
$7.46
Valve Spring
- The Valve Springs are for tractor models TEA20 and FE35 with 80mm, 85mm or 87mm Gas Engines. Note: packaged in quantity of 4. Price is for EACH. You must order quantity of 4.
(Item #: 183799, Ref: 825186M1)
$6.00
Engine Pistons and Sleeves
Piston, 85mm Gas
- Single Piston. For tractor models TEA20, TED20 both with Standard Motors 85mm Gas Engine.
(Item #: 173278, Ref: 1883817M91)
$92.40
Piston, 87mm Gas
- For tractor models 135, FE35, TEA20. All with 87mm Standard Gas Engines.
(Item #: 173149, Ref: 826276M91)
$91.40
Piston and Liner Kit, 80mm Standard Engine
- FOR 1 CYLINDER. Includes piston, rings, liner for TEA20, TED20, FE35 80mm Standard Motors 4 Cylinder Gas Engine. Does not include liner gaskets (2 required per engine) available as part number 825864M1.
(Item #: S.42273)
$130.01
Piston and Liner Kit, 85mm Standard Engine
- FOR 1 CYLINDER. Includes piston, rings, liner for standard 85mm Gas Engine in: TEA20, TED20, FE35 with 85mm Standard Motors 4 Cylinder Gas Engine. (Does not include liner gaskets (2 per cylinder), Part number S.42488. Order in the comment section. 8 used per engine).
(Item #: S.42275)
$101.71
Piston and Liner Kit, 87mm Standard Engine
- FOR 1 CYLINDER. Includes piston, rings, liner for 87mm Gas Engine in: TEA20, TED20, FE35 87mm Standard Motors 4 Cylinder Gas Engine. (Does not include liner gaskets 2 per cylinder, Part number S.42488. Order in the comment section. 8 used per engine.
(Item #: S.42276)
$102.70
Piston Sleeve
- 3.346 inch bore, 3.623 inch outside diameter, 6.750 inch overall height, .381 inch flange diameter, 4.495 inch flange width, wet type sleeve. Single sleeve. For tractor models TEA20, TED20 both with Standard motors 85mm Gas Engine.
(Item #: 172353, Ref: 893007M1)
$47.95
Engine Rings
No
Picture
Piston Rings
- For Massey Ferguson tractor model TEA20, Replaces Massey Ferguson OEM number 836118M91, 836821M91, 5 Ring Set, Top Ring: P1 - Parallel Faced Plain (2.00mm), 2nd Ring: P1 - Parallel Faced Plain (2.00mm), 3rd Ring: P1 - Parallel Faced Plain (2.00mm), 4th Ring: SS - Standard Slotted (4.75mm), 5th Ring: SS - Standard Slotted (3.97mm),
(Item #: 172325)
$18.90
No
Picture
Piston Ring Set
- For 1 cylinder. For tractor models TEA20 with Standard motors 80mm engine. For complete engine set order quantity of 4. This is a ring set used on replacement pistons. Number 4 ring in this set will not fit original pistons. Piston groove must be widened.
(Item #: S.42483)
$33.16
Piston Ring Set, Std, 85mm Gas
- 5 ring set for one piston. For tractor models TEA20, TED20 both with Standard Motors 85mm Gas Engine.
(Item #: 836118M91)
$12.99
Exhaust System
Exhaust Elbow
- For tractor models TEA20 with 80MM or 85MM Engine, TED20 with 85MM Engine, FE35, 135 UK all with 87MM Engine. Replaces 640010M1.
(Item #: 123089, Ref: 899130M1)
$25.00
Exhaust Pipe, Horizontal
- This Exhaust Pipe is used on Ferguson TEA20 (engine Serial Number 200001 and up with 85 mm Standard Gas Engine, and FE35 with 87mm Standard Gas Engine. Replaces 825093M91, 826941M91, 826958M91
(Item #: 169632, Ref: 825093M91)
$102.10
Gasket, Elbow
- Ferguson Gasket - Manifold to Exhaust Pipe, fits TEA20 with 85mm Standard Motors Engine. Used with 8254584M1 Manifold. Replaces: 825003M1
(Item #: 180546, Ref: 825003M1)
$5.06
Manifold Gaskets
- Ferguson Manifold Gasket fits TEA20 with 85mm Standard Motors Engine. Used with 825194M2 manifold. Replaces: 825194M2
(Item #: 180615, Ref: 825194M2)
$3.92
Muffler
- For tractor models 135, 148, 30D, 35, 550, FE35, TEA20, TED20, TEF20. Muffler has 2 inch inlet, 2.15 inch inlet inside diameter, 18.5 inch shell length, 21 inch outlet length, 1.66 inch outlet inside diameter, 41 5/8 inches overall length. Also replaces number CTJ2078.
(Item #: 160970, Ref: 894291M4)
$38.90
Muffler
- For tractor models TE20, TEA20, TEF20, TO35, FE35. All using Standard GAS Engines: 80mm, 85mm, 87mm. Also for Standard DIESEL Engines: 20C and 23C. 1 5/8 inch inlet diameter.
(Item #: 169634, Ref: 825698M91)
$40.00
Fuel System / Air Intake
Air Cleaner Hose
- For tractor models TO30, TO35, (TEA20 with 85mm engine serial number 200001 and up), 35 Gas. Measures 1 9/16 inches inside diameter small end, 3 inches inside diameter large end, overall length of 6 1/2 inches.
(Item #: 167809, Ref: 180362M1)
$18.00
Air Cleaner to Carburetor, Hose
- For model TEA20 with 80, 85mm engine serial number less than 439169. Inside diameter is 1 3/8 inch on small end, 1 5/8 inch on large end and 2 3/4 inches in length.
(Item #: 184558, Ref: 825004M1)
$3.88
Carburetor
- Replaces Zenith 24T2 and 28G. For UK Models WITH THE STANDARD MOTORS ENGINE: TE20, TEA20, MF35, MF135. Comes with gasket, fuel line (copper tubing with compression fittings) and short air inlet rubber hose. 2 3/16 inches center to center on mounting bolts.
(Item #: 185730, Ref: B3668)
$365.57
Carburetor Float
- For model TEA20 with Standard Motor 80 or 85MM. For British Zenith Carburetors 24T2, 28G, or C1264. Replaces: 58530, 825236M1 round Carburetor Float.
(Item #: 121623, Ref: 58530)
$69.00
Carburetor Kit, Basic
- For tractor models TEA20, with 80mm, 85mm Gas Engines. Zenith Carburetor numbers 24T2, 1264, 1201. Ferguson 825449M91 and 825448M91.
(Item #: 183462, Ref: S.42540)
$49.10
Fuel Cap
- Fuel Cap isThreaded with chain. Used on gas tank part number 181637M91. For TE20 serial number less than 200000, TEF20 with 20C engine. Replaces: 8255569M1, 825569M91
(Item #: 113553, Ref: 825569M91)
$20.80
No
Picture
Fuel Cap with Chain
- For model TEA20 with 80 or 85 MM Engine, TEF20 with 20C Engine. Brass Cap is threaded.
(Item #: 113553, Ref: 825569M1)
$20.80
Fuel Shut Off
- Fuel Shut Off Valve. For tractor models 165, 20D Indust/Const, 20E Indust/Const, 231, 240P, 255, 261, 2640, 30E Indust/Const, 35, 3505 Combine, 3525 Combine, 3545, 50 Loader, 65, 765, TE20, TEA20, TO20, TO30. 3/8 BSPT male thread to tank, 1/2 UNF female outlet.
(Item #: 151838, Ref: 1851653M91)
$8.06
Fuel Shut Off
- OEM type Fuel Shut Off Valve. For tractor models 165, 20D Indust/Const, 20E Indust/Const, 231, 240P, 255, 261, 2640, 30E Indust/Const, 35, 3505 Combine, 3525 Combine, 3545, 50 Loader, 65, 765, TE20, TEA20, TO20, TO30. 3/8 BSPT male thread to tank, 1/2 UNF female outlet.
(Item #: 151838, Ref: 1851653M91-OEM)
$8.06
Fuel Tank
- This Fuel Tanks is a direct replacement for tractors with 80, 87mm Standard Gas Engines. Does not come with cap. Cap can be ordered separately as Part Number C5NN9030D. Will work for Continental Z120, Z129. Sediment bowl will be 1 inch forward of original with no holes pre-drilled for tool box. For tractor models: TEA20, TE20, TO20, TO30. Tank measures 23 inches in length.
(Item #: 104098, Ref: 181637M91)
$194.00
Fuel Tank Cap
- For Massey Ferguson tractor models Super 90, TE20, TEA20, TO20, TO30, TO35, 20, 35, 50, 65, 85, 88, 135, 150, 165, 175, 178, 180, 1080, 1100, 1130, 1150, Compatible with Massey Ferguson Combine (s) 300, 410, 510, 540, 550, 750, 760, 850, 855, 860, 865, Compatible with Massey Ferguson Construction and industrial models 30, 50A, 203, 205, 302, 304, 2135, 3165, Replaces Massey Ferguson OEM number 520948M91, 180144M91, 188716M93,
(Item #: 154999)
$6.30
Governor Cup and Shaft
- For tractor models FE35, TEA20, TED20, 135UK
(Item #: 167996, Ref: 825157M91)
$30.17
Pipe, Air Cleaner to Carb
- For model (TEA20 >serial number 200001, 80/85mm engine).
(Item #: 113515, Ref: 825723M1)
$27.85
Sediment Bowl Assembly
- For tractor models TEA20, TED20, FE35, 80 mm, 85 mm, 87 mm. Sediment bowl assembly. Replaces part number 632948M92
(Item #: 105381, Ref: 2NAA9155B)
$18.60
Throttle Rod
- For model TEA20 with 85mm Standard Motors Engine serial number 200001 and up.
(Item #: 182773, Ref: 825072M91)
$43.08
Gaskets
Cylinder Sleeve Gasket
- Two of these are used per engine on Standard Engines. Replaces 3910267M1, 825864M1
(Item #: 179916, Ref: 825864M1)
$4.44
Gauges
Ammeter Assembly
- Fits all TO and MF models using 30-0-30 amperes. Non-luminous, chrome bezel for 2 inch hole. Replaces 515521M91.
(Item #: 121632, Ref: A0NN10670A)
$8.90
Ammeter Black Ring
- Fits all TO and MF models using 30-0-30 amperes. Black bezel for 2 inch hole. Replaces 515521M91.
(Item #: 110410, Ref: A0NN10670A-BLAC)
$10.40
Oil Pressure Gauge
- 80 pound oil gauge. Fits TE20, TEA20, TO35, MF35, MF50, MF65, Massey Harris 44, 55 Series. For 2 inch hole. Replaces OEM number 506902M92.
(Item #: 110411, Ref: FAD9273A)
$15.40
Oil Pressure Gauge
- For tractor models FE35, TEA20, 135, 148, 165, 168, 175, 178, 185, 188, 35, 65, 765, TO35 with STD. DIESEL ENGINES.
(Item #: 104108, Ref: 1853097M91)
$11.30
Oil Pressure Gauge with Male Fitting
- (1/8 inch NPT) For tractor models TE20, TEA20, TO20, TO30.
(Item #: 104106, Ref: S.61466)
$15.10
Hitch / Drawbar
Crank Arm, Leveling Box
- This Leveling Box Crank Arm is for tractor models TE20, TEA20, TO20, TO30, TO35, 20, 31, 35 (France), 35, 35X (France), 40, 50, 65, 130 (France), 135 (UK), 135, 150, 165 (UK), 165, 175 (UK), 175, 178 (UK), 180, 205, 230, 231, 231S, 235, 240 (S, Turkey), 240, 240P, 241, 245, 250, 253, 255, 261, 263, 265, 265S (S, Turkey), 270, 271, 275 (UK), 275, 281, 282, 283 (UK), 283, 285S (S, Turkey), 290 (UK), 290, 298, 302, 304, 360, 362, 365 (s/n: B18009-earlier), 375, 383, 390, 390T, 393, 394S (s/n: D03066-earlier), 396, 398, 399, 698, 2135, 2200, 3050, 3060, 3065, 3070, 3090, 3095, 3125 (France), 3125, 3140, 3165, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 202. Replaces Replaces 81822432, 81717231, C5NN594E, 957E594, 888607M1, 1662382M1, 181349M1
(Item #: 172986, Ref: C5NN594E)
$9.01
Drawbar Check Chain Kit
- This Drawbar Check Chain Kit includes: right hand/left hand anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. For tractor models TE20, TEA20, TO20, TO30.
(Item #: 115051, Ref: NCA596B)
$46.90
Drawbar Kit, Swinging
- This Swinging Drawbar Assembly contains drawbar: 29.35 inches long, 2.00 inches wide, 1.00 inch thick. Rear drawbar hanger, drawbar clevis assembly and drawbar clevis pin. For tractor models TE20, (TEA20 late only), TEF20, TO20, TO30, TO35, FE35, 50. May come painted red, black or primer.
(Item #: 111411, Ref: 49A34R)
$119.00
No
Picture
Drawbar Pin
- For Massey Ferguson tractor models TEA20, 35, 35X (FE), 65, 135, 165, 175, Replaces Massey Ferguson OEM number 824393M1, Replaces manufacturer number VPL4413, Used with drawbar 872149M1,
(Item #: 174469)
$10.90
Eyelet Assembly, Check Chain
- This Check Chain Eyelet Assembly fits Several Ferguson, Massey Harris and Massey Ferguson Tractors. The Bolt length is 2 11/16 inches. Thread diameter is 1/2 inch. Eyelet is 1/4 inch diameter. Replaces 180856M9
(Item #: 111911, Ref: EC0N660A)
$4.70
Hitch Eyelet Bushing
- Verify measurements: 7/16 inch x 5/8 inch x 1 1/2 inch. For tractor models TEA20, TE20, TO20, TO30, TO35, 35, 50.
(Item #: 173359, Ref: 180859M1)
$1.70
Leveling Box Fork
- A= 5/8 inch, B= 3/4 inch, C=1/2 inch, D=9-3/4 inch. For tractors: TE20, TEA20, TEF20, TO20, TO30, (TO35 when used with 14 inch shaft).
(Item #: 108897, Ref: 890674M1)
$20.00
Leveling Box Gear Housing
- For tractor models 135, 148, 150, 165, 175, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 25, 250, 255, 265, 275, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 35, 40, 40B, 40E, 50, 65, 765, F40, FE135, FE35, TE20, TEA20, TO35.
(Item #: 182821, Ref: 193181M1)
$40.75
Leveling Rod, LH
- Hole-to-hole length is approximately 20 inches. Fits TE20, TEA20, TEF20, TO20, TO30, FE35, TO35, F40.
(Item #: 111007, Ref: 182544M92)
$46.30
Lower Lift Arm Pin Nut
- Used on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5/8 UNF thread. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 83904384, 86637930, 87446, 33987S, 33987S36, 81419279, 701647, 353927X1, 170917423, 70917423, 6217938M1
(Item #: 178033, Ref: 353927X1)
$1.50
Lower Lift Arm Pin Nut
- Used internally on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5/8 UNF thread. Nylon Lock Nut. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 376450X1, 376267X1, 360262X1, 1679532M1
(Item #: 190743)
$1.30
Lower Link Pin
- Used on Ferguson TE20, TEA20 through tractor serial number 32500. This pin is used through an external plate rather than directly into the axle housing. Uses 178033 internal castle nut and 190743 external locking nut. Nuts not included. Replaces OEM part numbers 825502M1, 1025
(Item #: 190741)
$34.21
Retaining Clip Ring
- For Massey Ferguson tractor models TE20, TEA20, 35, 35X, 50, 65, 135, 148, 150, 165, 168, 175, 178, 180, 185, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 398, 399, 431, 461, 543, 575, 590, 675, 690, 698, 699, 3050, 3060, 3070, 3080, 3090, 3095, 3140, Compatible with Massey Ferguson Combine (s) 550, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 193092M1,
(Item #: 173702)
$4.39
Stabilizer Arm
- Stabilizer Arm for 3-point hitch measures 31-1/2 inch center to center hole spacing. For tractor models F40, TO20, TO30, TO35. Replaces 181778M1. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order.
(Item #: 110516, Ref: 230042R)
$15.40
Stabilizer Bar, Adjustable
- 28-1/2 inches to 35 inches, 7/8 inch hole in both ends. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40.
(Item #: 184053, Ref: S.00184)
$45.00
Stabilizer Bracket-LH
- For tractor models TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35, F40, 135, 20 Industrial, 30 Industrial, 35, 50 Industrial. Replaces 181776M91, 818662M94
(Item #: 155771, Ref: 181776M91)
$24.00
Stabilizer Bracket-RH
- For tractor models TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35, F40, 135, 20 Industrial, 30 Industrial, 35, 50 Industrial. Replaces 181775M91, 646102M1, 818661M93, 818661M94
(Item #: 155772, Ref: 181775M91)
$23.26
Stabilizer Pin with nut and lockwasher
- Category I. Length 2.625 inches, pin diameter .875 inches, thread .625 inches-18. Replaces Original Part Numbers 181777M1, 646101M1, 646101M2.
(Item #: 111677, Ref: SBP75-WNL)
$2.00
Stabilzer Arm
- For Massey Ferguson tractor models F40, TE20, TEA20, TO20, TO30, TO35, 50, Replaces Massey Ferguson OEM number 181778M1, 33.250" Long, 0.375" Thick, 1.75" Wide, 0.937" Hole, 31.562" Center to Center, Additional Handling and Oversize Fees Apply To This Item,
(Item #: 108781)
$11.17
Top Link Rocker Bracket
- This Top Link Rocker Bracket is used on Ferguson TO20, TE20 TEA20 and TO30 tractors. It replaces original part number 185273M91
(Item #: 178853, Ref: 185273M91)
$105.90
Hydraulic System
Dipstick
- Hydraulic oil level indicator measures overall length of 7 3/8 inches and 5 inches from the stop down. It is used on tractors models: FE35, Super 90, TE20, TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 203, 204, 230, 231, 235, 245, 253, 255, 265, 275, 360, 362, 383, 65, 85, 88, 202, 205, 302, 2135, 2500, 35, MF 50, MH 50. Replaces 180366M1, 193400M1, 514184M1.
(Item #: 111829, Ref: 193400M1)
$11.30
Draft Control Plunger
- For TE20, TEA20, TO20, TO30. Replaces OEM part number 890700M1. Fine Tread Style
(Item #: 111890, Ref: 8N541B)
$38.50
Draft Control Spring Plate
- This Draft Control Spring Plate is used on Ferguson TE20, TEA20, TO20, and TO30 tractors. It replaces original part numbers 180894M1 and TO527. If you need the plate with the pin, order 8N527.
(Item #: 178070, Ref: 9N527)
$12.05
Draft Control Spring Plate, With Pin
- This plate has the pin. For models TE20, TEA20, TO20, TO30. Replaces 180894m1, TO527. If you need the plate without the pin, order number 9N527.
(Item #: 178077, Ref: 8N527)
$27.00
Gasket, Hydraulic Pump Drain
- Hydraulic Drain Plug Gasket 2 inches inside diameter and 2 5/8 inches outside. It is used on TE20, TEA20, TO20, TO30 (Hydraulic Pump Drain Plug Gasket) ]; Replaces: 181468M1, TO7011
(Item #: 112227, Ref: 8N7011)
$1.38
Hydraulic Control Valve
- This Control Valve does NOT have a slot in the round end. Fits TE20, TEA20, TEF20, TO20, TO30. Hydraulic Valve Assembly includes housing, pintle, spring, pin clip, fully assembled.
(Item #: 110908, Ref: 9N640)
$22.90
Hydraulic Cylinder-2 1/2 Inch
- For tractor models TE20, TEA20, TEF20, TO20, TO30. Also replaces OEM number 201183.829382M1
(Item #: 111928, Ref: 9N510D)
$68.00
Hydraulic Lift Control Quadrant
- Hydraulic Lift Lever Control Friction Plate fits TE20, TEA20, TO20, TO30. It Replaces original part number 180887M1, 180887V1, 185148M91. Uses friction disc C5NN518B found on our web page. Bolt holes are 1/4 x 20.
(Item #: 111910, Ref: 9N515)
$26.80
Hydraulic Lift Piston Connecting Rod
- Hydraulic Lift Rod is used on FE35, TE20, TEA20, TO20, TO30, TO35, and 50 Tractors. It replaces original part numbers 180903M2, 887893M1.
(Item #: 155017, Ref: 86563314)
$20.00
Hydraulic Lift Rod
- For tractor models TE20, TEA20, TEF20, TO20, TO30.
(Item #: 155017, Ref: 180903M2)
$20.00
Hydraulic pump base to center housing Gasket
- Hydraulic pump base to center housing Gasket is used on Ferguson Tractor Models: TE20, TEA20, TED20, TEF20, TO20, TO30. Replaces 181065M1, 4082/181065M1, 4082
(Item #: 112062, Ref: 9N611)
$1.98
Hydraulic Pump Cam Block
- Cam Block, Hydraulic Pump. For tractors: TE20, TO20, TO30, TEA20, TEF20. Replaces 181066M1.
(Item #: 182638, Ref: 9N617A)
$19.76
Hydraulic Pump Overhaul Kit
- For TE20, TO20, TO30, TEA20, TEF20. Kit contains cam blocks, pistons, chamber repair kits, PTO shaft bushing, safety valve, and gaskets.
(Item #: 118572, Ref: HPOK1)
$131.00
Hydraulic Pump Piston
- Piston, hydraulic pump. For tractors: TE20, TEA20, TEF20, TO20, TO30. Replaces 890675M1
(Item #: 170925, Ref: 9N615)
$26.30
Hydraulic Pump Rebuild Kit, Comprehensive
- For tractor models TE20, TO20, TO30. Kit contains 2 cam blocks, 2 pistons, 2 chamber repair kits, PTO shaft bushing, safety valve, 2 valve chambers, 4 copper washers, base gasket, sump pump gasket, 2 side gaskets, PTO shaft gasket, 2 side plate gaskets. Note, it may be necessary to grind the opening where the pump fits in some tractors.
(Item #: 121926, Ref: S.61725)
$309.00
Hydraulic Pump Safety Valve
- For: TE20, TEA20, (TEF20, before serial number 330043), TO20, TO30. Relief Valve rated to 2000 PSI. **Note: The part you receive may look different than pictured, but will fit and work the same. Replaces 2174/207887, 207887, 2174, 181087M1, 181087M91, 181087V91
(Item #: 113392, Ref: 8N638)
$20.90
Hydraulic Spring Seat
- For tractor models TE20, TEA20, TO20, TO30 This 1 piece design replaces original 2 piece design. Also replaces 181083M1 and 181098M1.
(Item #: 182473, Ref: 9N525B)
$11.00
Lift Arm
- For tractor models TE20, TEA20, TO20, TO30, FE35, F40, TO35, 130, 135, 202, 203, 204, 205, 2135, 25, 302, 304, 35, 65. Lift arm for both right hand/left hand side. Lift arm has a 1.80 inch inside diameter and 37 spline hole.
(Item #: 114032, Ref: 180910M1)
$53.00
Lift Cover Gasket
- This Lift Cover Gasket is used on Ford TE20, TEA20, TED20, TEF20, TO20 and Jubilee Tractors. Replaces 180881M1, 3910263M1, 7042
(Item #: 112063, Ref: NAA502A)
$2.96
Lift Cylinder Housing Gasket
- For tractor models TE20, TEA20, TO20, TO30. Replaces 181059M1.
(Item #: 179718, Ref: 9N553)
$1.10
Lift Cylinder Piston, 2 1/2 inch
- For TO20, TO30, TE20, TEA20, (FE35 above serial number 65684), 50 All with 2-1/2 inch diameter piston), TO35 serial number <179303 with 2-1/2 inch diameter piston. Hydraulic Lift Cylinder Piston. DOES NOT come with Piston Rings set which can be ordered as part number 9N675.
(Item #: 150691, Ref: 9N530B)
$30.00
Lift Piston
- This is a single groove Hydraulic Lift Piston that measures 2-1/2 inches in diameter, groove is centered 1 1/4 inch from bottom of piston. O-Ring available as NAA533A and back up washer as NAA473A. For tractor models 202 Indust/Const, 35, 35X, 50 Loader, TE20, TEA20, TO20, TO30, TO35. Replaces 181983M1.
(Item #: 116069, Ref: NAA530B)
$27.90
Lift Shaft Bushing
- Bushing is 2.36 inch outside diameter, 1.97 inch inside diameter, 1.39 inches long. For tractors: TE20, TEA20, TEF20, TO20, TO30, FE35, F40, TO35, MF35, MF50, MF65, MF135, MF150, MF165. For shaft 184359M2, 4 required. If Shaft 897567M3 is used, it requires bushing 1870934M1 not supplied.
(Item #: 152601, Ref: 181018M1)
$6.86
Lift Yoke
- This Lift Yoke measures 5/8 inch x 24 thread. For tractor models TE20, TEA20, TEF20, TO20, TO30 and fits with 8N541B. Fine Thread Style. Replaces OEM 181055M1.
(Item #: 111887, Ref: 9N546C)
$34.60
Quadrant Stop Kit
- For tractor models TE20, TE35, TEA20, TO20, TO30, TO35, 35, 40, 50, 65, Massey Harris 50. Replaces: 825753M1.
(Item #: 126615, Ref: 9N521)
$8.94
Seat, Hydraulic Lift Draft Control Spring
- Hydraulic Lift Draft Control Spring Seat. Fits Ferguson TE20, TEA20, TO20, TO30. Replaces: 181077M1, 890530M1, TO624.
(Item #: 178127, Ref: 2N624)
$7.51
Lights
Bracket Set For lights
- Fits rounded fenders. For tractor models TE20, TEA20, TO20, TO30, TO35, FE35, F40, MH50, MF50, 65, 85, 90, 135, 150, 165, 175, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 290, 298, IND 20, 20C, 20D, 30, 30B, 30D, 40B, 50C. Replaces 1750674M1, 52335M1, 523334M1.
(Item #: 125324, Ref: 9N13471)
$46.40
Headlight, 12 Volt
- This is a serviceable 12 Volt headlight. It is 5-3/4 inch diameter, sealed beam bulb. Will work for left or right side. This light is not like the original. Will replace 505088M91, but is not the same. There is no visor.
(Item #: 183739, Ref: S.66419)
$48.70
Light Ring
- This Light Ring has a 6-5/8 inch outside diameter. It comes with ground wire. Attaches with two screws (not included). Replaces original part numbers 752311M91, 1752311M91
(Item #: 185530, Ref: 1752311M91)
$23.14
Light Switch, Fused
- For tractor models TO20, TEA20, TE20, TO30. Replaces OEM 830517M91.
(Item #: 112512, Ref: 8N11654B)
$10.80
Round Work Lamp, Chrome Ring
- This is a 6 volt work light with switch. It bolts on and includes base bracket. Replaces OEM number 1750692M91
(Item #: 180003)
$89.90
Round Work Lamp, Primer Ring
- This is a 6 volt work light with switch. It bolts on and includes base bracket. Replaces OEM number 1750692M91.
(Item #: 189161)
$88.52
Sealed Beam Bulb 12V
- Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521
(Item #: 111228, Ref: 70230252)
$15.60
Worklight Kit, 6 Volt, Chrome
- Kit includes, 6 inch steel body, chrome ring, sealed beam bulb, bulb retaining clips, steel worklight mount (socket), and switch. Assembly required.
(Item #: 180003, Ref: S.43377)
$89.90
Worklight Switch
- For tractor models TO20, TE20, TEA20, TO30, TO35.
(Item #: 113336, Ref: 8N13740)
$17.00
Oil System
Engine Oil FIlter Element
- This Oil Filter measures 6 1/8 inches long, 2 1/2 inches diameter, 1 3/8 inches hole diameter. Fits Standard 80mm, 85mm and 87mm Gas Engines in TEA20, TEF20, TED20. Comes with o-ring.
(Item #: 126010, Ref: 825807M1)
$8.04
Oil Filler Cap
- For tractor models TE20, TEA20, TO20, TO30, TO35, F40 and those using clip type caps. Oil Filler Cap will also replace gas fuel cap (not diesel). Does come with gasket. Measures 2 7/8 inches outside diameter, 1 1/2 inches inside with two outward tabs measuring 1 7/8 inches outside of tag to outside of tab.
(Item #: 154962, Ref: 760029M91)
$16.77
Oil Pump Shaft and Rotor
- Fits TEA20, TED20, FE35 with 80, 85 or 87mm Standard Motors Engine.
(Item #: 173052, Ref: 827501M91)
$104.00
Paint
No
Picture
Paint, Dark Gray, 1 Gallon
- This Ferguson Dark Gray was used on models TO20, TO30, TE20, TEA20, TED20, TEF20, FF30 and implements before 1955. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 108361, Ref: TP230GAL)
$57.00
No
Picture
Paint, Dark Gray, 1 Quart
- This Ferguson Dark Gray was used on models TO20, TO30, TE20, TEA20, TED20, TEF20, FF30 and implements before 1955. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 108360, Ref: TP230QT)
$25.00
No
Picture
Paint, Dark Gray, Spray Can
- This Ferguson Dark Gray was used on models TO20, TO30, TE20, TEA20, TED20, TEF20, FF30 and implements before 1955. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 108359, Ref: TP230SP)
$9.00
PTO / Driveline
Bearing
- PTO Shaft Ball Bearing for original 1 1/8 inch shaft, measures 2 7/16 inches outside diameter, 1 3/16 inch inside diameter, 5/8 inch width. For tractors: TE20, TEA20, TO20, TO30. 1440494X1, 195173M1, 339583X1, AT001040, AT1040, GA001773, GA1773.
(Item #: 180397, Ref: 9N715BC)
$4.20
PTO Cap
- Fits 1-1/8 inch PTO shafts. For tractor models TEA20, TEF20. 181181M1
(Item #: 125614, Ref: 2N726)
$26.99
PTO Housing Gasket
- For TE20, TO20, TEA20, TO30. PTO Housing Gasket.
(Item #: 109986, Ref: C5NN747A)
$0.36
No
Picture
PTO Oil Seal
- This oil seal measures1 5/8 inch inside diameter, 2 1/2 inch outside diameter, and 7/8 of an inch width. For tractor models TEA20, TED20, TEF20.
(Item #: 172298, Ref: 195673M1)
$10.40
PTO Shaft Conversion Assembly
- Shaft Assembly converts 1-1/8 inch PTO System to 1-3/8 inch. This is a complete Assembled shaft with bearing and housing assembly that is ready to install by removing 4 bolts from cover. Length 30-7/8 inches. Fits TO20, TE20, TEA20, TED20, TEF20, TO30. Uses gasket C5NN747A and cap 310088 (not included). $8 additional shipping is required for this part due to the size. This will be added to the shipping total of the order.
(Item #: 109422, Ref: 9N700-38)
$103.00
No
Picture
PTO Shaft Sleeve
- For original PTO Shafts for tractor models TEA20, TED20, TEF20, TE20, TO20, TO30. Will not fit replacement shafts. Replaces 181183M1.
(Item #: 158215, Ref: 9N735B)
$6.68
Seats
Bucket Style Metal Pan Seat
- Color may vary. Size is approximately 19 inches wide x 13 inches deep x 9-1/2 inches high. Fits Models: TE20, TEA20, TO20, TO30, TO35, MF50, MH50, MF35, 50, 65, 85, 88, 98, 135, 150, 165, 230, 235, 240, 245, 250, 265, 283, 333, 444, 555, 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 40, 40B, 50, 50A, 50C, 200, 2135, 2200, 3165. Uses cushion number R1001 and number R1000. $8 additional shipping is required for this part due to the size. This will be added to the shipping total of the order.
(Item #: 113263, Ref: 181313M93)
$75.00
Pan and Seat Cushion Set
- Comes with black metal pan, black bottom cushion and black backrest cushion with metal plate and hardware. For tractor models: 135, 150, 165, 20, 20C, 20D, 2135, 2200, 235, 245, 265, 282, 283, 30, 30B, 30D, 30E, 3165, 35, 40, 40B, 50 LOADER, 50A, 50C, 555, 65, 85, 88, 98, TE20, TEA20, TO20, TO30, TO35. Replaces 181313M93, 181324M1.
(Item #: 178546, Ref: 1210-1604)
$155.84
Pan Seat, Deep Dish
- Metal Pan Style Seat. Fits the following tractors: MF 130, TEA20, TED20, TEF20, TE20. The color of paint varies and will not match your tractor paint. You will need to repaint it to match your tractor.
(Item #: 101352, Ref: 8N400)
$54.00
Seat Bracket
- This seat bracket is used on the bucket style seat part number 181313M93 and is for tractor models: TEA20, TE20, TO20, TO30, TO35, 35, 50, 65, 85, 88, 98, 135, 150, 230, 235, 240, 245, 250, 265, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 35 Turf and Utility, 40, 40B, 40E, 50, 50A, 50C, 202, 203, 204, 205, 2135, 2200, 3165. Replaces original part number 181316M92.
(Item #: 155779, Ref: 181316M92)
$88.60
Seat Cushion Set
- Black seat cushion and backrest cover and inlay assembly. NOTE CUSHIONS MAY COME WITH WHITE PIPING. Consists of one MFCC13 and BR205. Fits later production MF235 and MF245 tractors with foam float seat. Replaces 181324M1, 181326M1, 513353M91.
(Item #: 168734, Ref: FCX811)
$133.90
Seat Hinge and Pins
- This is the hinge and pin found on bracket part number 181316M92. It is used for attaching bucket seat part number 181313M93. It includes 181322M1 hinge link, 181321M1 pin (3/8 inch x 6-7/8 inch) and 181320M1 pin (3/8 inch x 7-5/16 inch).
(Item #: 182977, Ref: 181322M1)
$36.18
Seat Pan, Flip-over
- For tractor models TE20, TEA20, TO35, FE35, F40, TO20, TO30, MH50. Replaces 181330M91. May come as a different color than pictured.
(Item #: 101239, Ref: C5NN400AE)
$59.00
SEAT SPRING
- Seat spring. Tractors: TE20, TEA20, TO20, TO30, FE35, F40, MF35, F40, F50. Replaces 825608M1
(Item #: 101242, Ref: 9N404)
$49.70
Sheet Metal / Body Parts
Bolt, Hood Pivot
- For tractor models TO20, TO30, TO35, TE20, TEA20, 35. One used on each side panel. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint.
(Item #: 114034, Ref: 180718M1)
$4.66
No
Picture
Fender
- These Clamshell Fender Skin For TE20, TEA20, TO20, TO30, TO35, 35, 135, 230, 235, 245, 2135, 20. Add additional $30 shipping per fender. This additional shipping charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces: 526904M91
(Item #: 100026, Ref: 526904M1)
$112.00
Fender Extension Plate
- If you have 11 x 32 wheels are are replacing your fenders you may need these extensions to accommodate your tire size. Used with fenders: 1884287M97 and 1884286M97. Replaces 884219M1, 884219M91, 1690462M2, 1690462M3, E250PA9
(Item #: 182617, Ref: 1690462M2)
$21.66
Fender, Left
- For 135, 135 Gas / 135 Petrol, 148, 20D, 20F, 230, 240, 250, 253, 270, 298, 30E, 35, 35 Gas / 35 Petrol, 35X, 50E, FE35, TEA20, TED20, TEF20. Left Fender with Bracket. Additional shipping charges apply due to oversize and weight, dimensions 47 x 32 x 9. Typical freight is $75.00 Call 1-800-853-2651 for rate. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint.
(Item #: 104155, Ref: 1884287M97)
$158.00
Fender, Right
- For 135, 135 Gas / 135 Petrol, 148, 20D, 20F, 230, 240, 250, 253, 270, 298, 30E, 35, 35 Gas / 35 Petrol, 35X, 50E, FE35, TEA20, TED20, TEF20. Rounded (not Flat-Top). Right fender with bracket. Additional shipping charges apply due to oversize and weight, dimensions 47 inches x 32 inches x 9 inches. Typical freight is $75.00 Call 1-800-853-2651 for rate. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 1690373M93, 1693057M91, 1884286M97.
(Item #: 104154, Ref: 1884286M97)
$207.00
Grill Kit
- Includes T-panel and both grills assembled. For tractor models: TE20, TEA20, TE30. Replaces 825636M91, 825635M91, 825641M91
(Item #: 167820, Ref: 825635M91)
$237.00
No
Picture
Grill Side Set, LH and RH
- 2 piece grill set fits TE20, TEA20. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint.
(Item #: 825636M91_Set)
$237.00
Grill, T Panel, Center
- Fits TE20, TEA20. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint.
(Item #: 155768, Ref: 825641M91)
$120.40
Hood Seal Kit, with Rivets
- For model TEA20.
(Item #: 113509, Ref: 8257165M1)
$36.84
Hood Support
- For tractor models TE20, TEA20.
(Item #: 125422, Ref: 825615M1)
$27.09
Rubber Hood Pads
- Rubber Hood Supports. These rubber pads fit onto cowling under hood. For TE20, TEA20, TO20, TO30, TO35, F40. Replaces OEM 180673M1.
(Item #: 113797, Ref: C5NN16N655B)
$0.70
Running Board Kit - Right Hand and Left Hand
- For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 35, 35 (France), 35X (France), 135 (UK), Replaces Massey Ferguson OEM number 180716M91, 180717M91, 191929M92, 890353M91, Step platform left and right sides, gas engine, Comes in red primer ready to paint, For Running Board - Right Hand use Item #: 111165,
(Item #: 161139)
$100.00
Side Repair Panels, LH and RH
- Steel, includes both left and right hand sides. For tractor models TE20, TEA20. A= 46 inches. Replaces 825639M91 and 825640M91.Add additional $30.00 to shipping due to weight.
(Item #: 185387, Ref: B1717)
$374.88
Step Plate Bracket, Rear
- For use with 61127S and 61128S Step Plate Assembly. Fits TE20, TEA20, TEF20, TO20, TO30, TO35. Replaces 180590M1. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint.
(Item #: 111624, Ref: S.42997)
$17.60
Step Plate - Left
- For TE20, TEA20, TEF20, TO20, TO30, TO35. Left Hand Step Plate. 24 inches in length. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint.
(Item #: 111165, Ref: 180717M91)
$55.00
Step Plate - Right
- For TE20, TEA20, TEF20, TO20, TO30, TO35. Step Plate - Right. 24 inches in length. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint.
(Item #: 111172, Ref: 191929M92)
$53.00
Steering
Axle, Swept Front with Bushing
- For Massey Ferguson: Industrial 20, 2135, FE35, TE20, TEA20, TEF20, TO20, TO30 TO35, 135, 230, 235, 35. Swept Front Axle with Bushing. Additional $20 shipping due to size and weigth.
(Item #: 173497, Ref: 183219M91)
$161.00
Brake Shoe to Anchor Pin Spring
- For Massey Ferguson tractor models TEA20 (s/n 200001-later), 135, 178, 231, 240, 240P, Compatible with Massey Ferguson Construction and industrial models 20D, 50F, 50H, 50HX, 60H, Replaces Massey Ferguson OEM number 825064M1,
(Item #: 181483)
$6.90
Drag Link
- Tube length is 32.75 inches long. For tractor models TO20, (TE20, TEA20, TEF20 if rear drag link ends 180391M91 or 826752M2 and rear front drag link ends 180381M91 or 194606M91 are used).
(Item #: 105276, Ref: 8N3314D)
$38.60
Drag Link Dust Cover
- Rear Tie Rod Boot with leather insert. Fits tractor models TEA20, TO20, TO30, TO35, MF35. Replaces: TO3324.
(Item #: 178150, Ref: 9N3324OE)
$16.00
Drag Link End, Front
- A= 3-1/8 inch, B= 5/8 inch right hand. For tractor models TEA20, TED20, TEF20.
(Item #: 105034, Ref: 825695M91)
$13.50
Drag Link End - Rear, Left Hand Thread
- Left hand thread. For tractor models TEA20, TEF20, TE20.
(Item #: 105036, Ref: 181582M91)
$18.50
Drag Link End-Rear, Left Hand Thread
- Fits tractor models TEA20, TED20, TEF20. Also replaces OEM number 181582M91 and 893607M1. (42161S) Thread diameter is .656 inch.
(Item #: 105036, Ref: 893607M1)
$18.50
Drag Link Tube
- Tube length 34.50 inches long. For tractor models TO20, (can be used on TE20, TEA20 or TEF20 if rear drag link ends 180391M91 or 826752M2) AND front drag link ends (180381M91 or 194606M91) are used with this tube. There is an additional shipping cost for this product of $15.00
(Item #: 114042, Ref: 8N33315)
$49.11
Front Axle Pin
- For TO20, TE20, TEA20, TO30. Front Axle Pin. 1 3/4 inches in diameter 4 1/4 inches in length. The bolt hole is 9/16 inches and the center hole is 1 5/16 inches.
(Item #: 182845, Ref: 825002M1)
$38.00
Front Axle Pin - Solid Center
- For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 35X, 135, 135 (s/n 9A86902-earlier), 148 (s/n 604669-earlier), 2135, Replaces Massey Ferguson OEM number 183221M1, 193746M1, Diameter: 1.75", Length: 5.50",
(Item #: 155652)
$20.00
Spindle, LH
- This spindle measures A=11 inch, B=1 1/4 inch, C=3/4 inch UNF. For tractor models TE20 serial number 49999 and up, 35, FE35, TEA20, TED20, TEF20, FE35, to serial number 368615, TO20, TO30, TO35. Also replaces OEM number 897415M91. The wheel bearing kit used for this spindle is part number WBKMF1.
(Item #: 102472, Ref: 180349M92)
$45.78
Spindle Nut
- Castle Nut is 3/4 inch x 16 UNF. Replaces 353928X1, 376451X1.
(Item #: 156038, Ref: 387930S36)
$1.36
Spindle Repair Kit
- (4) 180345M1 bushings, (2) 18560X thrust bearings, (2) 180355M1 spindle dust seals. For tractor models FE35, TEA20, TED20, TEF20, TE20, TO20, TO30, TO35, 135, 20, 2135, 230, 235, 240, 240S, 35.
(Item #: 104970, Ref: SBBSKIT01)
$32.50
Spindle, RH
- This spindle measures A=11 inch, B=1 1/4 inch, C=3/4 inch UNF. Fits tractor models TE20 serial number 49999 and above. 35, FE35, TEA20, TED20, TEF20, TO20, TO30, TO35, MF35. Also replaces OEM number 897414M91. The wheel bearing kit used for this spindle is part number WBKMF1.
(Item #: 102471, Ref: 180346M92)
$45.00
Steering Arm
- For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, 135 UK, 135, 148, 230, 240, 250, 35. Replaces 180 350M1, 180350M1
(Item #: 102536, Ref: 180350M1)
$40.00
Steering Column Cover
- Chrome cover includes spring and felt seal. Fits TE20, TEA20, TEF20, TO20, TO30.
(Item #: 178011, Ref: 890576M1)
$20.12
Steering Gear Inner Bushing
- For tractor models TEA20, TE20, TO20, TO30. Verify measurements of 1 1/8 inches inside diameter, 1 7/16 inches outside diameter, 1 1/8 inches in length.
(Item #: 173163, Ref: 195783M1)
$25.72
Steering Gear Outer Bushing
- For tractor models TEA20, TE20, TO20, TO30. Verify measurements of 1 5/16 x 1 7/16 x 1 13/64 inches.
(Item #: 173164, Ref: 180363M1)
$29.28
Steering Shaft Bearing Assembly
- For Steering Column (without Power Steering). Tractors: TE20, TEA20, TO35, 35, 135, 20, 2135. Replaces original part number 180528M91.
(Item #: 124501, Ref: 8N3517)
$34.76
Steering Wheel Nut
- Zinc Plated Steel Nut, Steering Wheel Acorn Style. 5/8 - 18 NF thread. 1.132 inches tall. 1 inch wrench size. Replaces 207562, 70207562, 913133, 351103-S, 351103S, 751454R1, AL2315T, 195592M1
(Item #: 183746, Ref: 351103S)
$3.96
Steering Wheel Nut, Black
- Black, Domed. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40. Repalces OEM 195592M1.
(Item #: 351103CCBlack)
$7.86
Steering Wheel Nut, Chrome
- Chrome, Domed. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40, 20, 202, 203, 204, 205, 50E, Pony, Super 90, 135, 135 UK, 270, 283, 290, 298, 35. Repalces OEM 195592M1. Head uses a 1 1/8 inch wrench.
(Item #: 150988, Ref: 351103CC)
$9.40
Steering Wheel - Original Type
- For tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 135, 50, 65, 2135. 17-3/4 inch diameter, 3/4 inch hub with 11/16 inch keyway. Metal Spokes.
(Item #: 101418, Ref: 180576M1-OE)
$32.40
Tie Rod End
- 3.594 inches long, .687 inch diameter, 18 left hand thread. For tractor models 135 early, 30, 350, TEA20, TED20, TEF20, TO20, TO30.
(Item #: 102497, Ref: 180391M91)
$9.00
Tie Rod End
- Replaces OEM number 194606M91. 3.250 inches long, .687 inch diameter, 18 right hand thread. For tractor models 135 early, 30, 35, TEA20, TEF20, TED20, TO20, TO30. Has Zerk Fitting and Castle Nut. Replaces 180381M91, 180507M91, 1862029M91, 194606M91.
(Item #: 105035, Ref: 180381M91)
$9.00
Wheel Hub
- Front Wheel Hub. Six bolt. For the following tractors: 35, 50, 65, MH50, TE20 (serial number to 49998 and 52497-52565), TO30, TO35. Replaces 180338M91, 898085M91.
(Item #: 133657, Ref: 180338M92)
$49.01
Wheels
Bolt and Nut Kit - Rear Rim to Wheel Center
- Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. Replaces 828217M1 and 353427X1. For rear wheel on: TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35.
(Item #: 182520, Ref: S.04352)
$2.80
Disc-Wheel Center (28 inch)
- This disc is used on multiple, Ferguson, Massey Harris and Massey Ferguson Models. Check measurements before ordering. Disc, rear wheel 28 inch and 32 inch, 8-bolt hub, 6-bolt rim. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Replaces original part number numbers 193701M1, 772861M1, 1678566M1, 1882977M1, 963613M1. Additional $35 shipping due to weight.
(Item #: 149804, Ref: D9NN1036CA)
$229.00
Dual Wheel Adapter
- Measuring 2 3/4 inches over all length, with 9/16 UNF threads male and female sides, this adapter is used on Massey Ferguson 133, 135, 140, 148, 150, 20, 202, 204, 20C, 20D, 2135, 230, 231, 235, 240, 245, 30, 3165, 340, 342, 35, 35X, 50, 550, 65, 765, TE20, TEA20, TED20, TEF20, TO20. Replaces 818017M1
(Item #: 179639, Ref: 818017M1)
$8.00
Front Lug Nut
- Used on Ferguson and Massey Ferguson models 1100, 1130, 135, 148, 150, 165, 168, 175, 178, 180, 202 Indust/Const, 203 Indust/Const, 204 Indust/Const, 205, 20D Indust/Const, 20F Indust/Const, 2135 Indust/Const, 250, 253, 255, 263, 265S, 270, 271, 275, 281, 282, 283, 290, 30E Indust/Const, 30H Indust/Const, 3165 Indust/Const, 340, 342, 35, 350 Indust/Const, 352, 355, 360, 362, 365, 372, 375, 383, 390, 390T, 393, 396, 399, 40E Indust/Const, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50 Loader, 565 Combine, 575 Skid Steer Loader, 590, 65, 670, 675, 690, 765, 85, 90, F40, TE20, TEA20, TO20, TO30, TO35, the nut has 1/2 inch - 20 thread and is 1-1/16 hex head. Replaces 195489M1, 195490M1, S9512A.
(Item #: 112060, Ref: 195490M1)
$3.00
Front Rim
- 4.50" x 16", 6 bolt, 6" circle, 4-5/8" pilot, 5.50 or 6.00 x tire. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 535448M91, 506020M91, 195638M91.1883335M3 Additional $15 shipping due to weight. This additional shipping charge will be added to your order.
(Item #: 103756, Ref: 8N1015D)
$72.00
Front Rim, 3.00 x 19
- As OE original Front rim 3.00 inch x 19 inch, uses 4.00 inch x 19 inch tire. For tractor models TE20, TEA20, TEF20, TO20, TO30. Additional $15 due to weight. Replaces 180367M91.
(Item #: 103760, Ref: C5NN1015A)
$80.00
Front Rim, 4.50 x 16
- Front wheel, with weight holes. 4.50 inch x 16 inch, 6-bolt, 6 inch bolt circle with 4.62 inch pilot for 5.50 inch or 6.00 inch x 16 inch tires. 2500 pound capacity. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 506020M91, 195638M91, 535448M91, R2055, and 1883335M3. Additional $15 shipping due to weight.
(Item #: 103756, Ref: 8N1015D)
$72.00
Front Tire Tube, 4.00 x 19
- Tube for 4.00 x 18 and 4.00 x 19 - 1 and 3 rib tires. For tractor models TE20, TEA20, TEF20, TO20, TO30.
(Item #: 118305, Ref: 281890)
$20.60
Front Wheel Hub Seal
- This Front Wheel Hub Seam measures 9/16 inches inside diameter, 2 11/16 inches outside diameter and 3/8 inches wide. Replaces OEM numbers 646110M1, 6110M1, 897363M1, 897363V1, 190443M1, 2048A, 319394M1, 2048B, 180008M1, 105334, G13053
(Item #: 112187)
$4.20
Rear Rim and Center Assembly
- For TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35. Size is 10 x 28. Replaces OEM part numbers 897137M92, 1678566M1. Add $80.00 extra shipping due to weight. This additional shipping charge will be added to your order.
(Item #: 178951, Ref: S61968)
$614.44
Rear Rim Bolt Kit
- This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 180876M1, 353427X1.
(Item #: 184824, Ref: 350719KIT)
$25.80
Rear Spinout Rim Stop
- For 90 degree drilled rim rail. For spin out rims with 4 sided rectangle shaped stops. Limited applications, verify style before ordering. Will NOT fit the spinout rims that we offer. Replaces 232274, 1755060M1, 230832, 70230832, 7023227, E5NN1057BA, K917337, T14751
(Item #: 152053, Ref: 1755060M1)
$18.00
Rim, 9X28
- This rim is for tractor models TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35. 28 inch diameter and loops are designed for 5/8 inch bolts. . Also replaces OEM number 897137M92, 1882978M92. Additional $25.00 shipping due to weight.
(Item #: 103780, Ref: NCA1020C)
$113.00
Spindle Dust Seal
- For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 35, 50, 65, 135, 150, 165, 230, 235, 240, 245, Compatible with Massey Ferguson Construction and industrial models 20, 2135, Replaces Massey Ferguson OEM number 180355M2, 180355M1, Upper seal used on spindle upright,
(Item #: 158129)
$2.30
Spindle Tab Washer
- This Tab Washer is used on Massey Ferguson FE35, TEA20, TED20, TEF20, TO20, TO30, TO35, 130, 135, 148, 150, 165, 168, 175, 178, 180, 185, 20, 20B, 20C, 20D, 20E, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 30, 3165, 340, 342, 35, 350, 35X, 360, 375E, 40, 550, 565, 65, 765. Measures 1.50 inches (38.20mm) outside diameter, .775 inch (19.70mm) inside diameter, 0.0625 (1.23mm) inch thick. It replaces original part numbers 957E1195, 81802388, 83910701, 898349M2, 180010M1, 180010M2
(Item #: 173191, Ref: 957E1195)
$0.80
Wheel Rim, Rim Size: 10 x 28
- The Assembly Contains a 10 x 28 Rim, the center disc and hardware. Comes assembled. Suitable for Tire size: 12.4 x 28, Alternative Tire size: 11.2 x 28. The rim measures 10 Inches from bead to bead where the tire rests. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Verify all measurements before ordering. Replaces 193701M1, 772861M1, 1678566M1, 1882977M1, 963613M1, 180863M91, 764994M91. Additional $35 shipping due to weight.
(Item #: 178951, Ref: S61968)
$614.44
Wheel Stud
- Stud is 9/16 inch x 2 inch. For 130 French, 135, 135UK, 150, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 240S Turkey, 245, 30, 3165, 35, 35X, 50, TE20, TEA20, TO20, TO30, TO35. Also replaces 185400M1 and 185400M2.
(Item #: 151964, Ref: 825507M1)
$1.80
Wheel Stud
- Front wheel stud. Measures 1.59 inches overall length and .930 threaded length. Threads are 1/2 UNF. These are #5 Steel per OEM specification and may come with a silver steel finish or a gold zinc finish. Fits TE20, TEA20, TO20, TO30, TO35, FE35, F40, 1100, 1130, 130, 135, 150, 165, 175, 180, 202, 203, 204, 2135, 250, 253, 255, 263, 270, 275, 281, 283, 290, 30, 3165, 340, 35, 350, 355, 360, 365, 375, 390, 4225, 4255, 4265, 50, 575, 590, 65, 675, 690, 85.
(Item #: 108606, Ref: 181328M1)
$1.40
Wheel Stud Nut
- Nut fits rear wheel stud. 9/16 inch NF. Used with 185400M1 and 185400M2 stud. For 130 French, 135, 135UK, 150, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 240S Turkey, 245, 30, 3165, 35, 35X, 50, TE20, TEA20, TO20, TO30, TO35. May come in a silver metal color or as pictured.
(Item #: 126617, Ref: 180004M1)
$2.33
Universal Parts and Accessories
Category: Accessories / Supplies
Accessories / Supplies
Auxiliary Heater, Universal
- This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions.
(Item #: 182644, Ref: MIS3127)
$357.14
Magnetic Block Heater
- Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle).
(Item #: 178758, Ref: MBH1153)
$100.39
Decals and Emblems
Ferguson Script Decal
- 12 inches long, vinyl, blue and white.
(Item #: 183045, Ref: R0735)
$13.58
Ferguson Script Decal
- 19 inches long, vinyl, green and chrome.
(Item #: 178283, Ref: R0736)
$25.37
Ferguson Script Decal
- 26 inches long, vinyl, blue white.
(Item #: 183046, Ref: R0737)
$30.76
Massey Harris Trademark Decal
- Red with yellow letters, 1-1/2 inches on vinyl.
(Item #: 183092, Ref: R5190)
$4.08
Massey Harris Trademark Decal
- Yellow with red letters, 1-1/2 inches on vinyl.
(Item #: 183072, Ref: R5191)
$4.08
Massey Harris Trademark Decal
- Red with yellow letters, 6 inches on vinyl.
(Item #: 183101, Ref: R5192)
$13.58
Massey Harris Trademark Decal
- Yellow with red letters, 3/4 inch on vinyl.
(Item #: 183066, Ref: R5236)
$3.58
Massey Harris Trademark Decal
- Red with yellow letters, 3/4 inch on vinyl.
(Item #: 183098, Ref: R5237)
$2.78
Electrical System
NOTE
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.
NOTE
No
Picture
Alternator, 12 Volt
- Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980.
(Item #: 111377, Ref: 8NE10305SE)
$108.00
Alternator Conversion Plug
- Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.
(Item #: 178026, Ref: ADR9209)
$15.50
Alternator Pulley
- Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt.
(Item #: 179552, Ref: AP3158)
$75.60
Alternator Top Adjusting Bracket, Universal
- Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole.
(Item #: 173326, Ref: 8NL10302)
$30.13
No
Picture
Battery Thermal Wrap
- 60 Watt, 28 inches long wrap to keep your battery warm.
(Item #: BTW28)
$35.98
No
Picture
Battery Thermal Wrap
- 160 Watt, 36 inches long wrap to keep your battery warm.
(Item #: BTW72)
$53.81
No
Picture
Coil
- This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter.
(Item #: 182583, Ref: 28010)
$45.00
Generator Cutout
- Generator cutout for Autolite, 6-volt. For most MH models to 1951.
(Item #: 105283, Ref: CB4014)
$21.10
No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering.
(Item #: 179436, Ref: AL65)
$4.15
No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering.
(Item #: 179437, Ref: AL85)
$4.15
Spark Plug
- Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering.
(Item #: 182459, Ref: AL425)
$4.00
NOTE
Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE
Starter Armature
- Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering.
(Item #: 182636, Ref: 1871662)
$96.30
Starter Drive
- Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models.
(Item #: 111105, Ref: 1036519M91)
$24.85
Starter, Generator, Distributor Tag, 6 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers.
(Item #: 182608, Ref: DELCO6)
$17.00
Starter Solenoid
- Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt.
(Item #: 105672, Ref: 1115510)
$31.90
Tag for Starter/Generator, 12 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers.
(Item #: 182606, Ref: DELCO12)
$14.60
Engine Gaskets
Silicone Blue RTV
- Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube.
(Item #: 178141, Ref: PRM77BR)
$10.31
Engine Parts
NOTE
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE
Engine Rings
NOTE
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").
NOTE
Exhaust System
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering.
(Item #: 118823, Ref: ZNL89020C)
$65.00
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering.
(Item #: 119038, Ref: ZNL89025C)
$85.00
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering.
(Item #: 114858, Ref: ZNL89051C)
$132.00
Chrome Exhaust Stack
- Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering.
(Item #: 173286, Ref: 146520CHR)
$85.00
Chrome Exhaust Stack
- Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering.
(Item #: 173287, Ref: 146490CHR)
$159.00
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering.
(Item #: 114945, Ref: ZNL89057C)
$135.00
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering.
(Item #: 119080, Ref: ZNL89485C)
$183.71
Chrome Exhaust Stack
- Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering.
(Item #: 173281, Ref: L102236CHR)
$97.00
Muffler Clamp, 1-1/4
- New Clamp for 1-1/4 inch outside diameter muffler inlet.
(Item #: 182682, Ref: MC114)
$3.70
Muffler Clamp, 1-3/4
- New Clamp for 1-3/4 inch outside diameter muffler inlet.
(Item #: 108866, Ref: MC134)
$3.56
Muffler Clamp, 1-3/8
- New Clamp for 1-3/8 inch outside diameter muffler inlet.
(Item #: 182687, Ref: MC138)
$1.90
Muffler Clamp, 2-1/4
- New Clamp for 2-1/4 inch outside diameter muffler inlet.
(Item #: 108870, Ref: MC214)
$4.00
Muffler Clamp, 2-3/4
- New Clamp for 2-3/4 inch outside diameter muffler inlet.
(Item #: 108872, Ref: MC234)
$6.07
Muffler Clamp, 3
- New Clamp for 3 inch outside diameter muffler inlet.
(Item #: 108873, Ref: MC300)
$5.55
Muffler Clamp, 3-1/2
- New Clamp for 3-1/2 inch outside diameter muffler inlet.
(Item #: 108874, Ref: MC312)
$7.96
Muffler Clamp, 4
- New Clamp for 4 inch outside diameter muffler inlet.
(Item #: 108875, Ref: MC400)
$4.66
Muffler Clamp, 4-1/2
- New Clamp for 4-1/2 inch outside diameter muffler inlet.
(Item #: 118838, Ref: MC412)
$10.30
Muffler Clamp, 5
- New Clamp for 5 inch outside diameter muffler inlet.
(Item #: 118841, Ref: MC500)
$13.69
Rain Cap
- This rain cap is for a 1.750 inch pipe.
(Item #: 108632, Ref: R1799)
$7.80
Rain Cap
- This rain cap is for a 2.0 inch pipe.
(Item #: 108633, Ref: R1800)
$9.50
Rain Cap
- This rain cap is for a 2.50 inch pipe.
(Item #: 108635, Ref: R1802)
$12.90
Rain Cap
- This rain cap is for a 2.750 inch pipe.
(Item #: 108636, Ref: R1804)
$10.30
Rain Cap
- This rain cap is for a 3.50 inch pipe.
(Item #: 108643, Ref: R1806)
$11.40
Rain Cap
- This rain cap is for a 4.0 inch pipe.
(Item #: 108645, Ref: R1807)
$13.26
Rain Cap
- This rain cap is for a 4.50 inch pipe.
(Item #: 108749, Ref: WC14)
$14.00
Rain Cap
- This rain cap is for a 5.0 inch pipe.
(Item #: 108750, Ref: WC15)
$15.26
Stainless Steel Clamp, 2.75 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications.
(Item #: 179749, Ref: ZNL90872A)
$5.80
Stainless Steel Clamp, 4 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications.
(Item #: 185428, Ref: ZNL90875A)
$6.24
Fuel System / Air Intake
Air Cleaner Filler
- Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch.
(Item #: 151026, Ref: S.43231)
$12.60
Carburetor Float, Zenith
- This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993
(Item #: 108454, Ref: C85-103-S)
$19.60
Choke Cable
- Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing.
(Item #: 178125, Ref: CC72)
$20.16
Fuel Line Sleeve, Pack of 10
- 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91
(Item #: 158879, Ref: 376525X1)
$4.00
Fuel Tank Liner
- For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank.
(Item #: 107976, Ref: R2043)
$78.90
Fuel Tank Screen
- This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length.
(Item #: 114940, Ref: R7949)
$10.00
Sediment Bowl Gasket, 2-1/8 inch
- For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA.
(Item #: 112364, Ref: C1778R)
$0.90
Throttle Linkage
- Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required.
(Item #: 173108, Ref: 1876343M92)
$10.00
Gauges
Hourmeter
- DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included.
(Item #: 178318, Ref: HM771)
$57.00
Hourmeter, Analog
- 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system.
(Item #: 178285, Ref: S.52672)
$40.00
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass.
(Item #: 179540, Ref: 919095)
$18.90
Hitch / Drawbar
Bracket Stabilizer
- Bracket, used with telescoping stabilizer 539881M2TSK.
(Item #: 178304, Ref: 514992M2)
$52.42
Drawbar
- Drawbar, category I, 7/8 inch pins. 11 holes, 26 inch bar length. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order.
(Item #: 103174, Ref: 180485M1)
$44.60
Hair Pin Assortment
- 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches).
(Item #: 182461, Ref: HPA15X)
$13.19
No
Picture
Level Box Assembly
- Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models.
(Item #: 110256, Ref: HLBMF61)
$76.00
Quick Hitch, Category I
- Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item.
(Item #: 180731, Ref: HF141101)
$328.58
Top Link Assembly, OEM Style
- Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9.
(Item #: 182641, Ref: 184134M91)
$93.00
Top Link Assembly, OEM Style
- Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91.
(Item #: 182642, Ref: 1690177M91)
$60.70
Top Link Assembly, OEM Style
- Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering.
(Item #: 182643, Ref: 184361M91)
$92.00
Top Link Assembly, OEM Style
- Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91.
(Item #: 182645, Ref: 194376M91)
$93.00
Top Link Assembly, OEM Style
- Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1
(Item #: 170303, Ref: 894377M1)
$79.80
Top Link Assembly, OEM Style
- Category 2-2, 18-3/4 inch Length of center tube.
(Item #: 182650, Ref: 893438M91)
$83.00
Top Link Assembly, OEM Style
- Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91.
(Item #: 184676, Ref: 1887285M91)
$60.42
No
Picture
Top Link, Cat I
- Top link, category I only, 16 inch body, 3/4 inch category I ball joints. Adjusts 20-1/2 inches to 29 inches overall. Dichromate plated center body.
(Item #: 30533E91)
$24.21
Top Link, Cat I and Cat II
- Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red.
(Item #: 112122, Ref: JSA1200R)
$35.00
Top Link, Cat II
- Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability.
(Item #: 182649, Ref: JSA2024R)
$95.34
Top Link, Cat II, Red
- Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches.
(Item #: 184552, Ref: 30108E91)
$63.05
Top Link, Cat I, Red
- Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red.
(Item #: 182651, Ref: JSA1024R)
$62.72
Top Link, Hydraulic
- Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size.
(Item #: 183653, Ref: B8106)
$270.76
Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating.
(Item #: 112156, Ref: DBL2)
$31.13
Hydraulic System
Clamp, Double Break-Away, Hydraulic
- For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp.
(Item #: 112480, Ref: S42-4)
$27.75
Coupler Flange
- Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b.
(Item #: 108772, Ref: L36-6)
$35.00
Filter Element
- 25 Micron replacement element for SF1-25.
(Item #: 182541, Ref: 1A9023)
$16.00
Filter Element
- 10 Micron replacement element for SF1-10.
(Item #: 120092, Ref: 1A9021)
$15.19
Hydraulic Hose Assembly-NPT, 12 inch
- Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends.
(Item #: 118257, Ref: H42-2M-12)
$10.20
Hydraulic Hose Assembly-NPT, 180 inch
- Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends.
(Item #: 179906, Ref: H42-2M-180)
$50.00
Hydraulic Hose Assembly-NPT, 24 inch
- Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1.
(Item #: 118256, Ref: H42-2M-24)
$12.50
Hydraulic Hose Assembly-NPT, 30 inch
- Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends.
(Item #: 118259, Ref: H42-2M-30)
$13.50
Hydraulic Hose Assembly-NPT, 36 inch
- Universal. 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. There is an additional shipping cost for this product: $5.00
(Item #: 118260, Ref: H42-2M-36)
$14.05
Hydraulic Hose Assembly-NPT, 48 inch
- Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length
(Item #: 118261, Ref: H42-2M-48)
$16.26
Hydraulic Pump Drive Flange
- The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler.
(Item #: 128567, Ref: 192199)
$21.35
Hydraulic Selector, isolator assembly
- For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT.
(Item #: 185644, Ref: TS300)
$120.92
Hydraulic Valve Kit, External, Single Spool
- Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible.
(Item #: 178324, Ref: TS3200M)
$763.57
Hydraulic Valve Manifold
- This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years.
(Item #: 173361, Ref: 19833A92)
$1019.09
LBP Coupler Center
- This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91.
(Item #: 178931, Ref: 192169)
$62.90
Universal Pressure Gauge, Hydraulic
- 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting.
(Item #: 172285, Ref: GG1000)
$14.26
No
Picture
Universal Pressure Gauge, Hydraulic
- 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting.
(Item #: 172338, Ref: GG60)
$14.00
Valve
- Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT.
(Item #: 183771, Ref: TS200BA)
$284.25
Implements
Axle Bolt
- Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36
(Item #: 170217, Ref: BH1317)
$15.02
Bearing cone (L44643)
- For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.
(Item #: 114630, Ref: 22)
$11.90
Bearing Cup
- This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610.
(Item #: 169771, Ref: 170BH)
$7.86
Caster Assembly
- Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings.
(Item #: 173612, Ref: 12269)
$173.20
Caster Assembly, Old Style
- Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11).
(Item #: 161111, Ref: BH215)
$114.00
Hub Assembly
- Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel.
(Item #: 180514, Ref: 63813BH)
$37.20
Hub with Bearing Cups
- 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36.
(Item #: 182627, Ref: BH1311)
$50.50
No
Picture
Round Bale Tine 31.5 Inches
- Fully Hardened. Also replaces Kverneland 221151.
(Item #: 182589, Ref: 221129)
$51.00
No
Picture
Round Bale Tine 38.5 Inches
- Fully Hardened. Also replaces Kverneland 241107, 241161.
(Item #: 182592, Ref: 241100)
$87.12
No
Picture
Round Bale Tine 43 Inches
- Fully Hardened.
(Item #: 182594, Ref: 241166)
$106.22
No
Picture
Round Bale Tine 49 Inches
- Fully Hardened.
(Item #: 152690, Ref: 241162)
$92.00
No
Picture
Round Bale Tine 55 Inches
- Fully Hardened.
(Item #: 182593, Ref: 241163)
$128.00
Seal, Caster
- Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.
(Item #: 180300, Ref: 30BH)
$4.40
Tail Wheel Assembly
- 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8.
(Item #: 111222, Ref: 500BH)
$56.00
No
Picture
Talc Powder Lubricant
- Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres.
(Item #: 107928, Ref: TP19000TP)
$20.00
No
Picture
Talc Powder Lubricant
- Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres.
(Item #: 107928, Ref: TP19000TP)
$20.00
Lights
Headlight Kit, 12 Volt, LH, Chrome Ring
- Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2.
(Item #: 186851, Ref: S.43374)
$99.80
Headlight Kit, 12 Volt, RH, Chrome Ring
- Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2.
(Item #: 187205, Ref: S.22341)
$103.10
Headlight Kit, 12 Volt, RH, Primered
- Kit contains 6" steel body, sealed beam bulb, primered headlight ring, springs 4, wing, and screws.
(Item #: 113341, Ref: S.22343)
$81.00
Light Switch with Knob
- Universal switch, for 6 volt tractors. Verify style is correct for your model.
(Item #: 114720, Ref: AA4667R)
$20.77
Portable Halogen Work Lamp
- 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use.
(Item #: L200MAGH)
$75.13
Work Light 12V
- Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back.
(Item #: 173803, Ref: L408-12V)
$52.50
Miscellaneous
Air Cond Comp
- New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already.
(Item #: 109093, Ref: 1904014M92)
$413.00