International Harvester / Farmall 7288 Tractor Parts

[Categories]   [All Farmall Models]   [Print]  

Brakes
Brake Valve Assembly, Used - For International tractor models 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM number 1272218C91, Replaces Casting nos 39011-47C, 39011-21C, For Self Bleeding use Item #: 499160, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434075) $270.01
Park Lock Cover, Used - For International tractor models 5088, 5288, 5488, 7288, 7488, Replaces International OEM nos 148737C2, 148737C1, Replaces International Casting nos 148738C2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496699) $234.01

Clutch
Range Input Shaft Clutch Kit - For International / Farmall tractor models 5488, 7288, 7488, Replaces International OEM number 120767C3, 1264928C2, 120843C1, 148938C3, 120842C1, Kit Includes: 6 Friction Discs, 6 Separator Plates, 3 Clutch Piston Housing Seals, 1 Master Clutch Inside Diameter Seal and 1 Master Clutch Outside Diameter Seal, (Item #: 169036) $849.00
Speed Drive Shaft Clutch Kit - For International / Farmall tractor models 5088, 5288, 5488, 7288, 7488, Replaces International OEM number 120696C1, 120699C1, 1286401C1, 120707C1, 120711C1, 1264552C93, Kit Includes: 10 Friction Discs, 8 Separator Plates, 2 Piston Return Plates, 2 Shift Clutch Piston Inside Diameter Seal and 2 Shift Clutch Piston Outside Diameter Seal, (Item #: 169037) $753.00

Cooling System
Water Pump - Water pump with hub installed. Heavy duty replacement with 8 vane impeller. Excellent where low cooling capacity is a problem. For diesel engines: D312, D360, D and DT414, D and DT436, D and DT466. For 1066, 1086, 1440, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 453, 5088, 5288, 5488, 6388, 6588, 666, 6788, 686, 7288, 7488, 766, 815, 886, 915, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. Replaces: 672644C95, 673162C93, 673162C94. (Item #: 100795, Ref: 673162C93) $105.00

Drive Train
Clutch Carrier, Used - For International tractor models 5088, 5288, 5488, 7288, 7488, Replaces International OEM nos 144218C2, 144218C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497393) $495.01
No Picture Crankshaft - Crankshaft less bearings, order bearings separatly for 6 cylinder D434 and DT436 diesel engines. For 1470, 1480, 1640, 3488, 3588, 3788, 4366, 4386, 5288, 5488, 6588, 6788, 7288, 7488 (Item #: 100789, Ref: 675669C92) $1589.01
Reverse Drive Gear, Used - For International tractor models 5088 (s/n 8526-later), 5288 (s/n 6242-later), 5488 (s/n 4268-later), 7288, 7488, Replaces International OEM nos 1277034C2, Teeth: 20, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431163) $234.01
No Picture Shift Fork Pad, Used - For International tractor models 5088, 5288, 5488, 7288, 7488, Replaces International OEM nos 1259853C1, 48008798, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444634) $83.01
Transmission Control Valve, Used - For International tractor models 5088, 5288, 5488, 7288, 7488, Replaces International OEM nos 224370C93, 224370C99, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497540) $860.01

Electrical System
Alternator - 12 volt, 105 amp. For tractor models (3088 1981-85 with 358 dsl), (3388 1978-81 with 436 dsl), (3488 1981-84 with 466 dsl), (3588 1978-81 with 466 dsl), (3688 1981-85 with 466 dsl), (3788 1980-81 with 466 dsl), (5088 1981-85 with 436 dsl), (5288 1981-85 with 466 dsl), (5488 1981-85 with 466 dsl), (6388 1981-84 with 436 dsl), (6588 1981-84 with 466 dsl), (6788 1981-84 with 466 dsl), (7088 1985-86 with 436 dsl), (7288 1985 with 466 dsl), (7388 1982-84 with 466 dsl), (7488 1985 with 466 dsl), (7588 1982-84 with V800 dsl), (7788 1982-84 with V800 dsl). All with Optional alternator. Replaces 1105538, 1101440. (Item #: 116882, Ref: ADR0195) $141.00
Starting Button - Attaches with spade terminals. For tractor models 3688, 3788, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488. Replaces IHS800. (Item #: 112232, Ref: 397940R93) $7.40

Engine Bearings
Cam Bearing Set - Camshaft bearing kit for six cylinder diesel engine. For tractor models 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. (Item #: CBK-H414) $42.50
Camshaft Bearing Set - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414, DT414, D436, DT436, DT466, Replaces International OEM number 680117C3, 680117C1, Sold as complete set, (Item #: 106672) $27.70
Connecting Rod Bearing - .010" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681315C3, Sold per journal, Bearing Size: .010" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106499) $11.70
Connecting Rod Bearing - .010" Oversize - Journal - For International / Farmall tractor models 3488, 3588, 3788, 5288, 5488, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) DT466 (diesel, s/n 440035 - later), Replaces International OEM number 1808060C91, 1808060C92, Bearing Size: .010" Oversize, Sold per journal, For Standard connecting rod bearing use Item #: 106550, (Item #: 106548) $13.00
Connecting Rod Bearing - .020" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 687382C3, Sold per journal, Bearing Size: .020" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106500) $12.90
Connecting Rod Bearing - .020" Oversize - Journal - For International / Farmall tractor models 3488, 3588, 3788, 5288, 5488, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) DT466 (diesel, s/n 440035 - later), Replaces International OEM number 1808061C92, Bearing Size: .020" Oversize, Sold per journal, For Standard connecting rod bearing use Item #: 106550, (Item #: 106549) $9.00
Connecting Rod Bearing - .030" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681316C3, 1823858C91, Sold per journal, Bearing Size: .030" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106545) $11.50
Connecting Rod Bearing - .030" Oversize - Journal - For International / Farmall tractor models 3488, 3588, 3788, 5288, 5488, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) DT466 (diesel, s/n 440035 - later), Replaces International OEM number 1808062C91, Bearing Size: .030" Oversize, Sold per journal, For Standard connecting rod bearing use Item #: 106549, (Item #: 106550) $9.00
Connecting Rod Bearing - .040" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Sold per journal, Bearing Size: .040" Oversize, For Standard connecting rod bearing use Item #: 106545, (Item #: 106546) $29.87
Connecting Rod Bearing - Standard - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681314C3, Sold per journal, Bearing Size: Standard, For .010" connecting rod bearing use Item #: 106546, (Item #: 106498) $11.90
Connecting Rod Bearing - Standard - Journal - For International / Farmall tractor models 3488, 3588, 3788, 5288, 5488, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) DT466 (diesel, s/n 440035 - later), Replaces International OEM number 1808059C91, 1808059C92, Bearing Size: Standard, Sold per journal, For .010" connecting rod bearing use Item #: 106550, (Item #: 106547) $12.00
Main Bearings - .010 - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414 (diesel), DT414 (diesel), D436 (diesel), DT436 (diesel), DT466 (diesel), Replaces International OEM number 1823848C91, Sold in complete sets, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106628, (Item #: 106629) $146.00
Main Bearings - .020 - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414 (diesel), DT414 (diesel), D436 (diesel), DT436 (diesel), DT466 (diesel), Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106628, (Item #: 106630) $110.00
Main Bearings - .020" Oversize - Set - For International / Farmall tractor models 3488, 3588, 3788, 4186, 4366, 4386, 5288, 5488, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) DT466 (diesel, s/n 440035 - later), Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106635, (Item #: 106634) $180.00
Main Bearings - .030 - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414 (diesel), DT414 (diesel), D436 (diesel), DT436 (diesel), DT466 (diesel), Bearing Size: .030" Oversize, Sold in complete set, For Standard main bearing use Item #: 106628, (Item #: 106631) $148.00
Main Bearings - .030" Oversize - Set - For International / Farmall tractor models 3488, 3588, 3788, 4186, 4366, 4386, 5288, 5488, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) DT466 (diesel, s/n 440035 - later), Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106634, (Item #: 106635) $180.00
Main Bearings - Standard - Set - For International / Farmall tractor models 3488, 3588, 3788, 4186, 4366, 4386, 5288, 5488, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) DT466 (diesel, s/n 440035 - later), Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 106635, (Item #: 106632) $134.00
Rod Bearing Set - ROD Bearing SET For 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966 (Item #: CRK-H361D) $105.09
No Picture Rod Bearing Set, .010 - Rod bearing set. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966. (Item #: CRK-H361D-010) $69.23
No Picture Rod Bearing Set, .020 - Rod bearing set. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966. (Item #: CRK-H361D-020) $95.18

Engine Gaskets
Front Crank Seal - This front crankshaft oil seal has a 3 inch Inside Diameter, a 4 inch Outside Diameter and is .5 inch wide. It Fits: 1440, 1460, 1470, 1480, 1640, 1660, 1680, 453, 815, 915, 1822 (diesels up to SN: JJC0012690), 1844 (diesels up to SN: JJ0002462), 515, H60E, H65C, S10, S8A, S9B, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 666, 6788, 686, 7288, 7488, 766, 966, 986, 886, E200, E412, E412B. Replaces: 690437C91 (Item #: 106647, Ref: 690437C91) $20.30
No Picture Gasket Set - Complete Gasket Set including crankshaft seals for 414/436/466 CID Diesel engines in: 966 Tractor and 815 Combines. (DT414 CID Diesel 6-cylinder engine. Cupped head piston) and for 1066, 1086 Tractors and 915 Combines. (DT414 CID DT414B Turbo Diesel 6-cylinder engine. Cupped head piston) and 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 and 1460, 1480 Combines (DT436 CID), 4366, (4386 to engine serial number 74999). (Item #: GK414) $310.60
No Picture Lower Gasket Set - For tractor models 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. (Item #: 106730, Ref: CS414) $106.00
Oil Pan Gasket - For tractor models 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. Due to the size of this gasket, (Item #: 106710, Ref: 671827C1) $24.70
Rear Crank Seal - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966. (Item #: 106660, Ref: 691631C91) $31.20
No Picture Rear Crankshaft Seal and Sleeve - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 2856, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, 21026, 21206, 21256, 21456, Compatible with International Combine (s) 815 (s/n 8000-earlier), 915 (s/n 2349-earlier), 1440, 1460, 1480 (s/n 24000-earlier), Compatible with International Construction and industrial models TD15B, 175, Neoprene style, (Item #: 176971) $141.00
No Picture Upper Gasket Set - Valve Grind Gasket Set for 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. Contains all gaskets necessary for doing a valve job, (including head gasket). (Item #: 106695, Ref: HS414) $103.00
Valve Cover Gasket - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414, DT414, D436, DT436, DT466 (Diesel), Replaces International OEM number 1342828C1, Rubber, (Item #: 128631) $8.90

Engine Rebuild Kits
Basic Engine Overhaul Kit, Less Bearings - For 3588, 3788, 4386, Engine serial number 77300 and up, 5288, 5488, 6588, 6788, 7288, 7488 and Comb 1470, 1480. (DT466B, DTI466B, DTI466C. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, complete gasket set with crankshaft seals. Order pin bushing and bearings separately if needed. (Item #: 130625, Ref: BEKHDT466B-LCB) $1169.01
No Picture Basic In-Frame Engine Kit - For 3588, 3788, 4386, Engine serial number 77300 and up, 5288, 5488, 6588, 6788, 7288, 7488 and Comb 1470, 1480. (DT466B, DTI466B, DTI466C. Cupped head piston). Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189604, Ref: BIFHDT466B) $927.00
Cylinder Sleeve - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414, DT414, D436, DT436, DT466, Replaces International OEM number A77692, Bore: 4.3", Flange Outside Diameter: 5.245", Overall Length: 9.435", Flange Thickness: .35", (Item #: 128746) $75.00
No Picture Engine Overhaul Kit, Less Bearings - For 3588, 3788, 4386, Engine serial number 77300 and up, 5288, 5488, 6588, 6788, 7288, 7488 and Comb 1470, 1480. (DT466B, DTI466B, DTI466C. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: EOKDT466B-LCB) $1359.37
Rear Main Seal Sleeve and Seal Installer - Used to install both the seal and sleeve at the same time, this tool is used with 106660 Seal and Sleeve set. (Item #: 122044) $275.00
No Picture Valve Overhaul Kit - For tractor models 966, combine 815, 1066, 1086, combine 915, 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388, combine 1460, 1480, 4366, 4386, 3588, 3788, 4386, 5288, 5488, 6588, 6788, 7288, 7488, combine1470, 1480 (6 cylinder Diesel Turbo and Non-Turbo, D414, DT414, DT414B, DT436, DT436B, DT466, DT1466, DT466B, DT1466B, DT466C, DT1466C). Kit includes valves, valve springs, valve keys, valve guides. (Item #: VOKH414) $362.33

Engine Parts
Camshaft with Drive Gear and Thrust Plate - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Compatible with International Combine (s) 815, 915, 1440, 1460, 1470, 1480, Replaces International OEM number 1802337C1, 1802337C2, 1802505C1, Kit Includes Drive Gear and Thrust Plate, Order Lifters Separately, For Camshft only use Item #: 113417, (Item #: 122005) $551.00
Camshaft With Large Lifters and Gear - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Compatible with International Combine (s) 815, 915, 1440, 1460, 1470, 1480, Kit Includes Drive Gear, Thrust Plate and 12 New 1-1/8" Lifters, (Item #: 122003) $588.00
Camshaft with Small Lifters and Gear - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Compatible with International Combine (s) 815, 915, 1440, 1460, 1470, 1480, Kit Includes Drive Gear, Thrust Plate and 12 New 1" Lifters, (Item #: 122002) $577.00
Connecting Rod Bolt - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D414, DT414, D436, DT436, DT466, Replaces International OEM number 676679C2, (Item #: 128743) $5.90
Constant Mesh Gear, Used - For International tractor models 5088 (s/n 8685-later), 5288 (s/n 6408-later), 5488 (s/n 4460-later), 7288, 7488, Replaces International OEM nos 1286484C1, 1286486C91, Hi-Drive, Inside Diameter: 2.492", Outside Diameter: 6.100", Teeth: 33 and 44, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436497) $540.01
Crankshaft, Remanufactured, 675669C92, 675591C - For International / Farmall tractor models 3588, 3788, 4366, 4386, 5288, 5488, 6588, 6788, 7288, 7488, Compatible with International Combine (s) 1470, 1480, Replaces International OEM number 675669C92, Replaces Casting number 675591C, 1816975C1, 1821913, 675591C2, 675591C3, 675591C4, Engine: DT466, 7.6 Liter, 6 Cylinder, Flange: Flat, No Centering Ring, 8 Bolt Holes, Snout: Straight, 3 Bolt Holes, 1 Keyway With Oil pump Drive Gear Installed, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., For a New version of this sku use Item #: 100789, (Item #: 200260) $1080.01
No Picture Deep Well Lifter - For International / Farmall tractor models Hydro 100, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3488, 3588, 3788, 4166, 4186, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, Compatible with International Combine (s) 1440, 1460, 1470, 1480, Replaces International OEM number 684729C1, (Item #: 165595) $8.30
Flywheel Ring Gear - For International / Farmall tractor models 4366, 4386, 5088, 5288, 5488, 7288, 7488, Replaces Case IH OEM number 1813752C1, 16.180" I.D., 16.950" O.D., 138 Teeth, 0.740" Width, Diesel engines: D436, D466, DT436, DT466, DT466B, DTI466, DTI466B, DTI466C, Used with flywheel assemblies 282227A1, 683187C92, (Item #: 159125) $144.00
Gear, 3rd and 4th Speed, Used - For International tractor models 5088, 5288, 5488, 7288, 7488, Replaces International OEM nos 1259836C1, Teeth: 20/50, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431165) $176.01
Hi Range Driving Gear, Used - For International tractor models 5088, 5288, 5488, 7288, 7488, Replaces International OEM nos 120580C1, Teeth: 20 and 53, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431169) $204.01
Mid Range Driving Gear, Used - For International tractor models 5088, 5288, 5488, 7288, 7488, Replaces International OEM nos 120876C1, Teeth: 38, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430643) $142.01
Output Shaft, Used - For International tractor models 5288, 5488, 7288, 7488, Replaces International OEM nos 1259864C92, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431190) $174.01
Range Transmission Imput Shaft, Used - For International tractor models 5088, 5288, 5488, 7288, 7488, Replaces International OEM nos 120895C3, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430627) $216.01
No Picture Ring Set 1 Cylinder - RING SET 1 Cylinder. For tractor models 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 915, all with 414 CID, 6 cylinder turbocharged diesel, standard bore 4.3 inches. Contains 2 x 1/8, 1 x 1/4, per cylinder. Can also be used to replace 687429C91. (Item #: 684256C91) $56.99
Timing Gear, Camshaft - 66 teeth. For tractor models 666, 686, 766, 826, 886, 926, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, and DT466. (Item #: 185488, Ref: 675600C1) $200.00
No Picture Timing Gear, Crankshaft - 33 teeth. For tractor models 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, and DT466. (Item #: 155745, Ref: 675406C1) $174.00
Transmission Drive Shaft, Used - For International tractor models 5088, 5288, 5488, 7288, 7488, Replaces International OEM nos 144248C92, 144248C93, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497867) $1000.01
Valve, Exhaust - Exhaust Valve. For 966 Tractor and 815 Combines. (DT414 CID Diesel 6-cylinder engine. Cupped head piston) and 1066, 1086 Tractors and 915 Combines. (DT414 CID DT414B Turbo Diesel 6-cylinder engine. Cupped Head Piston) and 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 and 1460, 1480 Combines. (DT436 CID DT436B Turbo Diesel 6-cylinder engine. Cupped head piston). (Item #: 156090, Ref: 676865C2) $21.50
Valve, Intake - Intake Valve. For 966 Tractor and 815 Combines. (DT414 CID Diesel 6-cylinder engine. Cupped head piston) and 1066, 1086 Tractors and 915 Combines. (DT414 CID DT414B Turbo Diesel 6-cyline engine. Cupped head piston) and 1466, 1486, 1566, 1586, 3388, 4166, 4186, 5088, 6388 and 1460, 1480 Combines. (DT436 CID DT436B Turbo Diesel 6-cylinder engine. Cupped head piston). (Item #: 156088, Ref: 675046C2) $14.60
No Picture Valve Service Kit - Cylinder HEAD Service KIT. For 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. Contains: springs, guides, locks, (no valves). (Item #: VSKH414) $127.04
No Picture Valve Spring - VALVE SPRING. For 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. (Item #: 156092, Ref: 682064C1) $4.70
Valve Train Kit - For International / Farmall tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 7288, 7388, 7488, Compatible with International Engine (s) D414, DT414, D436, DT436, DT466, DT466B, DT466C, DTI466C, Includes: Intake Valves, Exhaust Valves, Valve Guides, Valve Springs, Valve Keepers, (Item #: 120325) $272.00

Engine Pistons and Sleeves
Piston Pin Bushing - For tractor models 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. Price shown is for each. (Item #: 128614, Ref: 675006C1) $8.10
No Picture Sleeve - For tractor models 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 815, 915, 966. (Item #: 682720C1) $96.20
No Picture Sleeve and Piston Kit - For 3588, 3788, 4386, Engine serial number 77300 and up, 5288, 5488, 6588, 6788, 7288, 7488 and Comb 1470, 1480. (DT466B, DTI466B, DTI466C. Cupped head piston). Sleeves, pistons and rings, pins and retainers. For 4.3 inch standard bore. (Item #: PK-DT466B) $981.12

Exhaust System
Exhaust Manifold, Rear - For tractor models 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 100, Hydro 186. (Item #: 121729, Ref: 675779C3) $155.00
Exhaust Manifold - Rear, Used - For International tractor models Hydro 100, Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Compatible with International Combine(s) 815, 915, 1460, 1470, 1480, Replaces International OEM number 675779C1, 675779C2, 675779C3, Rear Section, For a new version of this item use Item #: 121729, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421729) $87.01
Manifold Gasket Set - Used with 683564C91 front and 675779C3 rear manifolds. (Item #: 121768, Ref: R4919G) $21.50

Gauges
Instrument Gauge Cluster, Used - For International tractor models 3088, 3288, 3488, 3688, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM nos 1252533C91, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497681) $204.01

Hitch / Drawbar
No Picture Drawbar - For International / Farmall tractor models 5288, 5488, 7288, 7488, Replaces International OEM number 142616C2, 60.5" Long, 3" Wide, 1.5" Thick, (Item #: 115525) $226.00
Drawbar, Used - For International tractor models 5288, 5488, 7288, 7488, Replaces International OEM number 142616C2, 60.5" Long, 3" Wide, 1.5" Thick, For a new version of this item use Item #: 115525, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 415525) $160.01
Lower Adjusting Screw - Measuring 12.125 inches over all length, this Adjusting Screw and 1.250 inch - 7 thread. The threaded portion is 6.268 inches long. This part replaces: 1272852C1, 1272852C91. It is used on HYDRO 186, 1066, 1086, 1466, 1468, 1486, 1566, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6788, 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 7288, 7488, 8910, 8920, 8930, 8940, 8950. This part is used with 108584C1 Upper Adjustment Screw, 149836C4 Leveling Screw Housing, 149838C1 Upper Adjustment Screw, 72877C1 Leveling Screw Housing. (Item #: 108795, Ref: 149837C1) $82.00
Lower Lift Arm Front Bushing - This inside diameter of this bushing is 1.009 inches. The outside diameter is 1.252 inches. It is used on international models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488. It is used on the front lower link. The part replaces OEM numbers 1272681C1, 71808C1, 392180R1 (Item #: 165272, Ref: 1272681C1) $41.05
Sway Limiter Cam, LH, Used - For International tractor models 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM nos 142583C1, 70481C1, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497175) $147.01
Sway Limiter Cam,RH, Used - For International tractor models 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM nos 142584C1, 70482C1, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497172) $147.01
Telescoping Lift Arm Latch - For Category II three point hitches, this latch is used on International models: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 21206, 21256, 21456. Order 382193R1 Upper Spring and 382192R1 Lower Spring if need (sold separately). Replaces 398399R1 (Item #: 109523, Ref: 398399R1) $25.00
No Picture Torsion Shaft Bolt - For tractor models 1086, 1486, 1586, 3388, 3588, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 186. (Item #: 126753, Ref: 71390C1) $20.40
Torsion Spring Bar, Used - For International tractor models 966 (Hydros), 1066 (s/n 53785-earlier), 1086, 1466 (s/n 28107-earlier), 1468, 1486, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM nos 71385C1, 71385C2, Used with Crank Arm Shaft 71387C1, Length: 21 5/8", Uses Locating Bolt 71390C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499579) $176.01

Hydraulic System
Remote Hydraulic Coupler, Remanufactured, 1272192C92 - For International / Farmall tractor models 3088, 3288, 3488, 3688, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM number 1272192C92, 1272192C91, 1272192C93, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 207003) $583.01
Remote Hydraulic Coupler, Used - For International tractor models 3088, 3288, 3488, 3688, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM number 1272192C93, 1272192C91, 1272192C92, ISO Couplers, With Drain Fitting, For a Remanufactured version of this part use Item #: 207003, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 407003) $300.01

Lights
Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 126470C1, 131203C1, 131348C1, 131508C1 (Item #: 111242, Ref: 28A116) $12.90
LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $35.00
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Item #: 111241, Ref: 373662R91) $9.10
Lower Light Housing, LH - For tractor models 3088, 3288, 3488, 3688, 5088, 5288, 5488, 6588, 6788, 6388, 7288, 7488. (Item #: 122659, Ref: 143172C3) $200.00
Lower Light Housing, RH - For tractor models 3088, 3288, 3488, 3688, 5088, 5288, 5488, 6588, 6788, 6388, 7288, 7488. (Item #: 122660, Ref: 143173C3) $200.00
Rear Light Housing, LH - For tractor models 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 786, 886, 986, Hydro 186, 6588, 6788, 6388, 7288, 7488. (Item #: 125333, Ref: 111562C2) $93.00
Rear Light Housing, RH - For tractor models 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 786, 886, 986, Hydro 186, 6588, 6788, 6388, 7288, 7488. (Item #: 125334, Ref: 111563C2) $93.00
Tail Lamp - There is no reason that this can't be used for your tractor if you need tail lights. This Round tail light is 4 inches around, with 2 1/2 inch center to center mounting holes. It is 1 1/2 inches deep and has 2 wire. If you need this light as a warning light or turn signal, order LED90 to go with it. This part is for 12 volt systems. (Item #: 182906, Ref: 131183C91) $52.00

Miscellaneous
Auxiliary Remote Valve, Used - For International tractor models 5088, 5288, 5488, 7288, 7488, Replaces International OEM number 1285880C91, Replaces International Casting nos 142555C2, For a new version of this item use Item #: 109287, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409287) $222.01
No Picture Cab Foam Door Panel - For International / Farmall tractor models Hydro 186, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Color: Black, Kits are computer cut to assure accuracy, Cab foam spray adhesive use Item #: 112756, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112732) $156.00
No Picture Cab Foam Door Panel, Maroon - For International / Farmall tractor models Hydro 186, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Color: Maroon, Kits are computer cut to assure accuracy, Cab foam spray adhesive use Item #: 112741, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112734) $114.00
Cab Foam Door Panel, Western Cab, Brown - For International / Farmall tractor models Hydro 186, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488 (Western Cab), Color: Brown, Kits are computer cut to assure accuracy, Cab foam spray adhesive use Item #: 112727, (Item #: 112733) $166.00
No Picture Cab Foam Door Panel, Western Design, Brown - For International / Farmall tractor models Hydro 186, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Color: Western Design Brown, Kits are computer cut to assure accuracy, Cab foam spray adhesive use Item #: 112743, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112736) $158.00
Cab Foam Floor Mat, Black - For International / Farmall tractor models 3088 (with hydraulicl seat), 3288 (with hydraulicl seat), 3488 (with hydraulicl seat), 3688 (with hydraulicl seat), 5088 (with hydraulicl seat), 5288 (with hydraulicl seat), 5488 (with hydraulicl seat), 6388 (with hydraulicl seat), 6588 (with hydraulicl seat), 6788 (with hydraulicl seat), 7288 (with hydraulicl seat), 7488 (with hydraulicl seat), Color: Black, 1/8" textured rubber top with a 1/2" foam bottom, 5/8" thick floor mat with inner sound barrier, (Item #: 112751) $88.00
Cab Foam Main Headliner Spacer Kit - For International / Farmall tractor models Hydro 186, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, (Item #: 112716) $43.40
Hydraulic Valve, Used - For International tractor models 5088, 5288, 5488, 7288, 7488, Replaces International OEM nos 1285879C92, 1285879C91, 142552C91, Open Center Hydraulic Sysyem, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497741) $530.01
Main Headliner, Black Basketweave Vinyl - For International / Farmall tractor models Hydro 186, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Color: Black Basketweave, Included Cans of Adhesive: 1, Material: Perforated Vinyl (18%), Pieces: 2, (Item #: 168842) $204.00

Oil System
Oil Filter - Oil filter element, spin on type. Approximate diameter 7.17 inch height, 3.69 inch outside diameter. For diesel engines: D282. D312, D and DT414, D and DT 436, D and DT466. For 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 2656, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 5088, 5288, 5488, 6388, 656, 6588, 666, 6788, 686, 7288, 7488, 815, 85, 915, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 111132, Ref: A184775) $14.50

PTO / Driveline
IPTO and Pump Drive Shaft, Used - For International tractor models 5088, 5288, 5488, 7288, 7488, Replaces International OEM nos 120748C1, Length: 8 1/2", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431161) $228.01
PTO Housing Cover, Used - For International tractor models 5088, 5288, 5488, 7288, 7488, Replaces International OEM nos 139263C91, Replaces OEM nos 139264C1, Single Speed, 1000 rpm, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434124) $350.01

Sheet Metal / Body Parts
Cab Headliner Kit - Main headliner, 4-piece set, black basket weave. For: Hydro 186, Hydro 3488, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788 7288, 7488. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 109454, Ref: CHIH86) $141.00
Instrument Panel Housing, Used - For International tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM nos 1251804C2, 1251804C1, For tractors with cab, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498058) $77.01
Rear Light Panel - Left Hand, Used - For International tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM number 111562C2, 111562C1, Fits Left Hand Side, For a new version of this item use Item #: 125333, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435860) $45.01
Rear Light Panel - Right Hand, Used - For International tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM number 111563C2, 111563C1, Fits Right Hand Side, For a new version of this item use Item #: 125334, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437144) $45.01
Step Unit - Left Hand - For International / Farmall tractor models 1086, 3288, 3388, 3488, 3588, 3688, 3788, 5288, 6388, 6588, 6788, 7288, 7488, Left Hand Step, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide, 6" deep, mounts at 30° angle to tractor with 9" between steps, Step protrudes 26" from the cab door, Handrail not included, Comes primered (color may vary). Prior to painting check fitment, Handrail - Left Hand use Item #: 114438, Additional Handling and Oversize Fees Apply To This Item, (Item #: 108823) $410.00

Steering
Ring Gear And Pinion Set, Used - For International tractor models 5088, 5288, 7288, Replaces International OEM nos 1270676C1, Consist of Ring Gear and Pinion Shaft, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497980) $1050.01
Sleeve Assembly - For International / Farmall tractor models 3388, 3588, 3788, 6388, 6588, 6788, 7288, 7488, Replaces International OEM number 142137C2, (Item #: 155183) $275.00

Wheels
Rim Clamp Fixed, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 21026, 21206, 21256, 21456, Replaces International OEM nos 397251R1, 380871R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499564) $10.01
Rim Clamp, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 21026, 21206, 21256, Replaces International OEM number 380870R1, For a new version of this item use Item #: 157781, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499563) $10.01
Universal Parts and Accessories Category: Accessories / Supplies

Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems
Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.80
Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $17.40
Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.40
Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $5.00
Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.90
Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.80
Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $30.50
Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $36.60
Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.60
Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.90
Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $5.00
Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $14.20
Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.50
Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.60
Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.40
Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.80
Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $14.20
Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $25.50
International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.40
International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.40
International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.60
International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.80
International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $14.00
International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $10.50
International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $17.50

Electrical System
NOTE Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.	NOTE
No Picture Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40
Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20
No Picture Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98
No Picture Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81
No Picture Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20
Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15
Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $19.20
No Picture Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60
Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80
NOTE Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!	NOTE
Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80
Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.20
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80
Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $25.00

Engine Gaskets
Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Exhaust System
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00
Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71
Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00
Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30
Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70
Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00
Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80
Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50
Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.08
Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90
Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40
Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40
Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50
Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake
Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00
Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92
Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $30.10
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Gauges
No Picture Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837) $30.00
No Picture Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00
Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30
Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB) $49.57
Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar
Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $364.00
Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $364.00
Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $439.00
Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $439.00
Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.17
Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System
Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40
Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50
Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10
Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10
Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50
Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90
Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90
Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00
Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00
Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10
Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30
No Picture Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00
No Picture Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00
No Picture Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48
No Picture Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54
No Picture Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00
No Picture Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61
Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30
Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00
No Picture Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10