Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


International Harvester / Farmall 450 Tractor Parts

[ Show Pictures ]

[Categories]   [All Farmall Models]   [Print]  


Brakes
Bonded Lined Brake Disc - These Bonded Lined Brake Disc measure 6-1/2 inches x 3-1/2 inches and have 12 splines on center hub. For tractor models M and MV serial number 2942236 and up. MD and MDV serial number 285505 and up. Super M and MD; W6 serial number 45847 and up. WD6 serial number 45301 and up, Super W6 and WD6; 400, W400, 450, W450. Combines: 141 and 141 Hillside, 151 Hillside gas and LP, 181, 403, 503, 615, 715, to serial number 23000, 815. Cotton Pickers: 414, 416, 420, 422, 616. Replaces 357117R91, 368181R92, ABC453. PRICED EACH. If you order 1, you will receive 1 disc. (Part No: 1963810C2)
$21.06

Brake Actuating Spring - Used with disc brakes. For tractor models (M from serial number 294226 and up), (MD from serial number 285505 and up), Super M, Super MTA, Super MV, Super MDV, Super W6, Super W6TA, Super WD6, OS6, ODS6, 400, 450, W400, W450, 560, 656, 660, 664, 666, 686, Hydro 70, Hydro 86. Replaces A30897, A41816. Replaces 357116R1, 619731C1, 72504717V. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105 inch. (Part No: A155624)
$1.79

Brake Pedal Return Spring - For tractor models: 300, Super M, Super MD, Super MTA, Super W6, Super W6TA, OS6, ODS6, Super H, Super HV, 350, 400, 450, W400, W450, 460, 560, 660. Replaces IHS873. (Part No: 357164R1)
$11.18

Brake Pedal Shaft - For tractor models (M, MV serial number 294226 and up with disc brakes), (MD, MDV serial number 285505 and up with disc brakes), Super M and MTA, W6, WD6, Super W6, 400, 450. Shaft, brake pedal. Does not include cotter key and two shaft keys. (Part No: 357046R1)
$74.18

Brake Pedal Shaft Seal - This brake pedal shaft seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. It Fits: 230, 3514, B-450, C, H, HV, I6, ID6, M, MD, MDV, MTA, MTAV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6, Super W6TA, Super WD6TA, W4, W6, W6TA, WD6, 200, 240, 300, 330, 340, 350, 3600A, 3616, 400, 404, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 400, W400, 450, W450, 8000, Hydro 70, Hydro 86. Replaces: 354514R91, 360076R92, 364471R91, 380959R91, 380960R91, 47169A, 555397R91, 581646R91, U17944, 476838 (Part No: AB2578R)
$15.75

Brake-Actuating Assembly - Fits tractor models 400, 450, M with serial number higher than 294226, (MD, MDV both with serial number 285505 and up), (MV with serial number 294226 and up), Super M, and Super MTA. (Part No: 366182R93)
$222.04

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Sold individually. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Part No: M830T)
$2.76

Disc Brake Boot - This Boot is used on Tractors with Disc Brakes. Used on Farmall MTA, ODS6, OS6, Super M, Super MD, Super MDV, Super MV, Super W6, Super W6TA, Super WD6, 400, 450. Replaces 357044R1 (Part No: 357044R1)
$4.50

Spring Clutch & Brake - Spring, torque amplifer clutch release spring, 3 5/8 inces overall length. For tractor models 100, 130, 140, 400, 450, 560, 660, Super MTA, Super W6TA. (Part No: 61084D)
$10.14

Clutch
Bearing - Pilot - New Pilot Bearing. 25mm (.9843 inch) inside diameter, 52mm (2.0472 inch) outside diameter with seals on both sides. For tractors: 400, 450, 500, 560, 600, 660, H, HV, M, M500, MD, MDV, MV, Super H, Super M, Super MD, Super MTA, Super W4, Super W6, W4, W6, WD6. (Part No: ST544)
$4.73

Clutch Alignment Tool - 1-3/16 inch 11 spline, 1-3/4 inch 17 spline, .984 inch pilot. For tractor models Super MTA, 400, 450, 560. (Part No: S.70929)
$24.95

Clutch Bearing - Release bearing for tractor models 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Please verify measurements before ordering. Replaces 18567D, 362028R91, 362028R92, 55211D, 55212D (Part No: N1087)
$14.27

Clutch Disc - 12 inch diameter, 1-3/16 inch hub, 11 spline. For tractor models Super MTA, Super W6, 400, 450, 560, 660. (Part No: 375564R91)
$116.89

Clutch Disc - TORQUE AMPLIFIER Clutch Disc. This disc is a 7 inch disc with 14 splines. For tractor models Super M, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2544, 2656. (Part No: 375701R91)
$112.62

Clutch Disc, New - 12 inch, 4 button, spring loaded, 1.1875 inch spline diameter, 11 spline. For tractor models 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 400, 450, 500, 560, 600, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Super MTA. (Part No: 384395R94)
$120.68

Clutch Kit, 7 Inch - This new torque amplifier clutch kit contains a re-manufactured 7 inch, 6 spring pressure plate assembly (360215R94), a new 7 inch 14 spline 1 1/2 inch hub, solid, metallic clutch disc (375701R91), and new release bearing (362028R92). For tractors: Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2656. (Part No: 360215NC)
$351.28

Pressure Plate - This pressure plate is 12 inches, 3 lever and 12 spring. For Models (M, MD, MDV, MV all after serial number FBK294707), Super M prior to serial number 60000, Super MD, Super MTA prior to serial number 60000, W9, Farmall 450. Replace part numbers 360079R and 360079RN. (Part No: 357299R95)
$240.00

Pressure Plate, New - Pressure Plate, NEW. 12 inch, 12 spring, 3 levers adjust on pivot point, 1.750 inch spline diameter, 17 spline. Flywheel step, 1.406 inch. For tractor models 400, 450, 500, 560, 600, 660, Super MTA. Replaces: 359121R97, 359121R96, 359121R95, 359121R94, 359121R93, 359121R92, 359121R91, 360079R94, 360079R93, 360079R91, 359041R93, 360080R91. (Part No: 359121R98)
$251.38

Release Bearing - Clutch Release Bearing, inside diameter 2.49 inches, outside diameter 4.06 inches, width .820 inches, sealed roller. For mechanical release systems. For tractors: 400, W400, 450, W450, 560, 660, 756 766, 786, 886, 966, 986, 1066, 1086, 1206, 1256, 1456D, 1466, 1468, 1486, 1566, 1586, 21206, 21256, 21456, 2756, 3288, 3388, 3588, 3688, 3788 For 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966. Replaces original part numbers 361407R91, 362026R91, 362027R91, 365867R91, 365868R91, 367153R91, 58612D, 69789C1 and 69789C91. (Part No: N1585)
$22.37

Release Bearing - Greasable. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3688, 3788, 400, 4100, 4156, 4166, 4186, 4366, 4386, 450, 4568, 560, 6388, 6588, 660, 6788, 706, 756, 786, 806, 826, 856, 886, 966, 986, Hydro 100, W400, W450. It has an inside diameter of 2.50 inches, an outside diameter of 4.125 inches, and is .83 inches wide. Please verify measurements before ordering. (Part No: 365867R91)
$33.39

Remanufactured Clutch Kit - Our re-manufactured clutch kit contains: 12 inch, 17 spline, 1 3/4 inch hub, 12 spring, re-manufactured pressure plate assembly; a 12 inch 11 spline 1 3/16 inch hub, re-manufactured clutch disc with woven lining; new release and pilot bearings. There is also a $50.00 refundable core charge that will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. For tractors: Super MTA, 400, 450, 460. For 200, 230, HV, MTA, Super H, Super M. (Part No: 359121K)
$247.02

Cooling System
Fan Belt - This Fan Belt measures 7/8 x 45 7/8 inches. For C248, C264, and C281 gas engines and C248 diesel in: 400, 450, 6, B450, M, MD, ODS6, Super M, Super MD, Super W6, Super WD6, W400, W450, WD6. Please verify measurements before ordering (Part No: 16131DA)
$14.48

Impeller, Water Pump - For tractor models 400, 450, M Super M. This is the impeller only, Does NOT include shaft or thrust washer. (Part No: 6345DAX)
$22.48

Radiator - Core size 22.50 inches high, 19.250 inches wide. For tractor models 400, 450. (Part No: 361417R93)
$522.34

Radiator - For tractor models 400 and 450. Replaces OEM number 361416R93. This radiator has a hole in it for the steering column. This radiator uses cap part number R1844. (Part No: R2766)
$652.05

Radiator Cap - 7 pound, fits short filler neck. For tractor models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 serial number 44C0034705 and below), (1660 serial number JJC0038346 and below), (1680 serial number JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9. (Part No: 393229R1)
$6.68

Radiator Cap - 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. (** = FOR SHORT FILLER NECK). Fits **Super H, **Super M, MD, **Super W4, **Super W6 & WD6, **Super W9 & WD9, **100, **130, **140, **200, **230, 240, **300, **330, 340, **350, **400, 404, **424, **444, **450, **460, **504, **560, 606, **660, 2424, 2444, 2504, 2606, 4100, 4156, 4166. Replaces OEM 393229R91. (Part No: 180224M91)
$6.30

Radiator Hose Kit - Radiator hose kit for tractors: M serial number 109445 and up, Super M, 400 and 450 diesel. Hoses (1) 2-1/8 inch inside diameter x 4 inch length, (1) 2 inch inside diameter x 2-3/4 inch length, (2) 1-1/2 inch inside diameter x 2-3/8 inch length. For 815, 966. (Part No: RHKM400)
$15.65

Radiator/Fuel Tank Hold Down Spring - This spring is used for the Radiator and for the Fuel Tank. Total 5 used per tractor, 2 for the radiator and 3 for the fuel tank. Spring measures 3/4 of an inch diameter and 1.15 inches long. For tractor models H, HV, O4, O6, SUPER H, ( As radiator hold down spring only - 2 used: SUPER M, SUPER MTA, W4, W6, WD6, 400, 424, 450, 2424. (Part No: 48826D)
$8.39

Thermostat - This 160 degree Long Neck Thermostat. Fits the following tractor models: H, HV, M, MD, MDV, MTA, MV, O4, O6, Super H, Super HV, Super M, Super MD, Super W6, W4, W6, W9, 300, 350 Gas, 400, 450, 560 Diesel, 656 Diesel, 660 Diesel, and 706 Diesel. It does not come with a gasket. Replaces part numbers 313942R91, 313942R92, 315838R91, 317668R91, 37634DA, 261514R92. (Part No: R1852)
$39.75

Thermostat - This Thermostat opens at 180 degrees F. It is used on the following Diesel tractors: 2606, 2706, 300, 350, 3616, 400, 450, 460, 560, 606, 656, 660, 706, TD6. Replaces 262882R1, 313942R91 (Part No: 70229927)
$14.25

Water Block Drain Plug, Winged - Plug 3/8 inch pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas/Diesel), serviceable for Cub, Cub LoBoy. (Part No: 45314DC)
$10.88

Water Jacket Cover - For tractor models 400, 450, M, Super M, Super MTA. Gasket available separately as 46128DB. (Part No: 46125DA)
$29.25

Water Pump Pulley Flange - Flange only. For tractor models M, MD, 400, 450. (Part No: 2370DBX)
$27.63

Water Pump, Assembly - For tractor models 400, 450, M, MD, Super M, Super MTA. Crawlers: T6, TD6. (Part No: 353729R92)
$205.69

Decals and Emblems
Decal Set - Chassis only set for 400, 450 Gas. (Part No: R3605)
$29.40

Decal Set - For tractor models 400, 450 Diesel. Complete Decal Set. (Part No: R3606)
$44.10

Emblem, Torque Amplifier - Torque Amplifier emblem used on Farmall models 300, 350, 400, and 450. (Part No: 362394R1)
$22.50

Side Emblem - For tractor models 300, 350, 400, 450. Side Emblem. "McCORMICK". 1 piece, 1 side. Replaces 362317R1. (Part No: R4204)
$43.50

Side Emblem - For 300, 350, 400, 450. Side Emblem. "FARMALL". 1 piece, 1 side. Replaces 362315R2. Length is 26 inches, 2 1/8 inches tall. (Part No: R4206)
$51.06

Side Emblem - For 450. Side Emblem. "450". 1 piece, 1 side. (Part No: R2542)
$16.28

Drive Train
Axle Seal, Rear - For 2-3/4 inch axles (inside diameter 2-3/4 inch, outside diameter 3-5/8 inch). For tractor models 200, 230, 240, 2504, 2544, 2656, 340, 400, 404, 450, 460, 504, 544, 560, 656, 666, Hydro 70, Hydro 86, M, Super M, Super MD, Super MV, Super MDV, Super MTAD, Super MTA. All with 2-3/4 inch axle diameter. Replaces 117567H1, 154935H1, 165651H1, 167175H1, 333750R91, 358780R91, 358819R91, 360457R91, 369319R91, 377788R1, 377788R91, 381042R91, 48776D, 57085D, A27130, AA510R, AA520R, O7041AB (Part No: 377788R1)
$14.93

Bearing - Tractors, Implements. Ball bearing, has many applications including water pump bearing on tractors: M, MD, Super M, Super MD, W6, WD6, 06, ODS6, Super W6, Super WD6, W9, WD9, Super WD9, 400, W400, 450, W450. For 400, 450, 5088, 5288, 5488, M, MD, O6, ODS6, Super M, Super MD, Super W6, Super WD6, Super WD9, W400, W450, W6, W9, WD6, WD9. Replaces ST205A (Part No: E75GE9)
$5.39

Bull Pinion Shaft Bearing Retainer Oil Seal - Thisábull pinion shaft bearing retainer oil seal has a 2.25 inch Inside Diameter, a 3.256 inch Outside Diameter and is .375 inch wide. There are two used per tractor. It Fits:á400, 450, 560, 660, MTA, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MVTA, Super W6, Super WD6, W400, W450, W6TA, M (SN: 294226 and up), MV (SN: 294226 and up), MD , MDV. Two needed per tractor. Replaces: 1699480C91, 200721H1, 3139744R1, 336626R91, 357037R91, 358896R91 (Part No: VT3755)
$17.99

Gear Shift Boot - Some of the Farmall / International tractors were not factory equipped with a gear shift boot, and it was sold as an extra. This boot is used on models: H, M, 560, I4, I6, ID6, Super MVTA, 2606, HV, MD, T340, T5, MDV, MV, TD6, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MTA, Super MV, Super W4, Super W6, Super WD6, W4, W6, WD6, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 606, 660, B275, 354, 384. It measures 4-3/4 inches tall, 11/16 inch top hole inside diameter and 2-3/4 inches bottom hole. (Part No: 64603DA)
$20.91

Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Part No: 53717DA)
$4.43

Ramp Assembly, Bearing Carrier & Overrunning Clutch - This Remanufactured Bearing Carrier and Overrun Ramp Assembly is for tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Additional $25 core charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 365402R11)
$143.82

Rear Saddle - When using this rear saddle a wide fron can be installed. For tractor models M, MD, MTA, Super M, 450, Farmall 400. (Part No: 360406R1)
$170.89

Reverse Idler Gear Bushing - This Bushing Measures 1.245 inches inside diameter, 1.375 inches outside diameter, 1.486 inches long. Sold individually. This bushing has a superior dimpled brass inner design to retain grease. No need for an external grease hole. Note: Must be honed or reamed to size when installed. Used on the following as a reverse idler gear bushing: 400, 450, 560, 660, B-450, BM, BMD, M, MD, MDV, MTA, MV, O6, ODS6, SBM, SBMD, Super M, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W6, Super WD6, W400, W450, W6, W6TA, WD6, WD6TA; Replaces: 48841D (Part No: 48841D)
$11.18

Torque Amplifier - Remanufactured "Sprague Type" torque amplifier with nut & belt pulley gear. Remanufactured torque amplifiers are rebuilt to original specifications. Every part is examined, measured and tested to assure compliance. ** A REFUNDABLE $100 CORE CHARGE IS ADDED TO COST ON THIS ITEM. If purchasing on-line, the amount will be added during processing after the on-line order is place and will not show on the on-line order confirmation. THE Customer is responsible to call one of our Yesterday's Tractor Sales Representatives at 800-853-2651 (after the new part is received) to obtain a core return authorization and address for the return. THE CUSTOMER IS RESPONSIBLE FOR THE CORE RETURN SHIPPING. Core credit issued after inspection of returned core. For tractors: 400, 450, 560, 660. (Part No: 363499R94)
$798.74

Torque Amplifier Gasket Set - For tractor models 400, 450, 560, Super MTA. (Part No: 373338R91)
$42.72

Torque Amplifier Primary Sun Gear without Bearing - 23 tooth. For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, (Super MTA serial number 60001 and up). (Part No: 361283R32)
$187.05

Electrical System
Coil, Original, 12 Volt - OEM style coil. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. This is an International Harvester OEM style 12 volt distributor coil. This distributor coil has a 2.8 ohm rating between the two primary winding terminals. Requires an external resistor. (Part No: 353875R91)
$57.27

Coil, Original, 6 Volt - OEM style coil. Measures overall length of 5 3/8 inches, Diameter at widest point of center ridge is 2 1/4 inches. This distributor coil has a 1.4 ohm rating between the two primary winding terminals. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 353874R91)
$59.00

Distributor Cap - 2-3/16 inches high, fits 4 cylinder. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Part No: 351693R92)
$5.39

Distributor Condenser - Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Part No: 353903R1)
$1.62

Distributor Drive Housing - This is a USED distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Part No: 363749R91)
$72.45

Distributor Drive Shaft - Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Part No: 353934R11)
$14.96

Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: 424, 444, 450, W450, 460, 504, 560, 600, 606, 650, 656, 660, 706, 756, 806, 826, 856, 3514, 3616. Replaces 384831R91. (Part No: 353900R11)
$9.90

Distributor Gear - This Distributor Gear has 32 teeth. It is used on IH Distributor 353898R11. Replaces original part numbers 353902R1, 531461R91 (Part No: 353902R1)
$29.25

Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Part No: 341139R1)
$8.46

Distributor Insulating Terminal Washer - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a Distributor Insulating Terminal Washer. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Part No: 251538R1)
$3.75

Distributor Rotor - For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: 353896R1)
$4.47

Distributor Tach Drive Housing Block Off Plate - This new Distributor Tachometer Drive Housing Block Off Plate with Gasket is used with part number 363749R91 when a Tachometer is not used. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces 363764R1, 363765R1. (Part No: 363764R1)
$7.95

Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Part No: 353907R1)
$6.75

Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Part No: 353906R1)
$4.50

Distributor, New - Original IHC design comes with a 32 tooth drive gear. For tractor models Super W6TA, Super W9, Super WD6, Super WD6-TA, Super WD9, Super WDR9, W4, W400, W450, W6, W9, WD6, WD9, WDR9, WR9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 504, 600, 650, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 3514. R6332 (Part No: 107304C91)
$179.33

Distributor, New - New and complete distributor comes with a 32 tooth gear, and is for tractor models: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA and other IH equipment with International Distributors. Replaces: 107296C91, 107299C91, 107302C91, 107304C91, 353890R91, Distributor Housing Casting Number: 353898R11, 354900R91, 357935R91, 362473R91, 362722R91, 364653R91, 364696R92, 366928R91, 372712R91, 380622R91 (Part No: 107304C91)
$179.33

Distributor, Rebuilt - Complete remanufactured distributor for Farmall Cub, A, B, C, Super A, H, M, Super H, Super M, W6, W9, Super W6, 100, 130, 200, 240, 300, 400, 404, 450, 504 tractors with IH distributor with 353898R1 housing casting number. IH original part numbers 353890R91, 107304C91. A refundable $80.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Also NOTE: Note that if the core is not a complete and good core, part or all of the core charge will not be refunded. Typically, most cores need a shaft replacement and the cost of the shaft will be deducted from the core charge. This is usually $30 (Part No: 353898R1)
$151.80

Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Part No: 376852R91)
$6.80

Generator Belt - Generator belt, fits engines : C248, C264, and C281. For tractor models: M, 6, Super M, Super W6, 400, W400, 450, W450. For 400, 450, 6, M, Super M, Super W6, W400, W450 (Part No: 49341D)
$10.44

Generator, Delco Type, 12 Volt - For tractor models 140, 214, 220, 37, 404, 420, 424, 450, 460, 504, 560, 600, 606, 660, 700, 770, 780, 806, 2404, 2424, 2504, 2606, Cub, Lo-Boy, T6, TD6, TD9, Power Unit. Replaces Delco numbers 1100305, 1100335, 1100363, 1100364, 1100369, 1100394, 1100401, 1100409, 1100426, 1100424. Remanufactured. Refundable $25.00 core charge will be added to your order. (Part No: TG-59)
$249.34

Key Switch, 2 Terminal - With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Part No: 366313R91)
$19.95

Magneto Coil Cover - For tractor models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Part No: 47449DAY)
$25.95

Magneto Distributor Cap, H4 Magneto - For H-4 MAGNETO ignition on Models: 100, 200, 230, 240, 300, 330, 340, 350, 400, 450, A, B, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Part No: 47413DYC)
$16.50

Magneto Gasket Set - This magneto gasket set is for H4 Magnetos. It contains; Coil cover gasket 47453D, Distributor body gasket 47408D, Distributor gear cover gasket 49419D, Condenser hole cover gasket 359966R1 (48472DA), Magneto mounting gasket 55780DE (55780DD). Replaces: 359966R1, 47408D, 47453D, 48472DA, 49419D, 55780DD, 55780DE, E4226. For tractor models A, AV, B, BN, C, H, HV, I4, I6, I9, M, MTA, MV, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, T4, T5, T6, T9, U2, U2A, U4, U6, U9, W4, W6, W6TA, W9, WR9, WR9S, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650, 400, 450 (Part No: MGK103)
$9.75

Magneto Point Set, F-4 - For tractor models F-4 type magneto only. Used on A, B, C, H, HV, M, MC, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 340, 350, 400, 450. (Part No: 353173R1)
$23.79

Magneto Rebuild Kit, H4 - Magneto Rebuild Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. Includes condenser, winding coil, points, rotor, cap, coil cover, gear and gasket. (Part No: H4-KIT)
$170.15

Magneto Rotor H4 Magneto - This Rotor is used on tractors with H4 magneto. Replaces 47425DX, 47425DY, 47428DA (Part No: 47425DY)
$10.71

Magneto Tune-up Kit For H4 - Magneto Tune-up Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Includes condenser, points, rotor. (Part No: 21A10R)
$23.24

Magneto or Distributor Drive Shaft - Verify part number before ordering. For tractor models (300, 350, 400, 450 all not used with hydra touch system), (H, HV serial number 268224 and up), (M, MD, MDV, MV all serial number 148867 and up), Super H, Super HV, (Super M, Super MTA not used with hydra lift, attached with engine driven pump). (Part No: 352079R1)
$92.68

Solenoid - Starter solenoid assembly, services Delco starters: 1113034, 1113198, 1113685, 1113053, 1113201, 1113690, 1113176, 1113203, 1113197, 1113647. Hydro 70, 84, 86~ 400, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 1456D, 1466, 1468, 1566, 2400A, 25 For 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2400A, 2500A, 2544, 2656, 2706, 2756, 2826, 2856, 400, 4166, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 756, 766, 826, 84, 856, 86, 966, HYDRO 70, HYDRO 84, HYDRO 86. Replaces 585618C91, 65479C2 (Part No: 1115510)
$15.84

Spark Plug - Autolite Spark Plug for: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. If you order 1, you will only receive 1 spark. You need to order 4 to receive 4. Replaces OEM number 360942R1. (Part No: AL386)
$2.51

Spark Plug Wire Set, Custom - IH or Delco Distributors. For tractor models Cub, A, Super A, B, BN, C, Super C, H, Super H, M, MTA, 300, 350, 400, 450. (Part No: S.67475)
$17.18

Starter Armature - Used with Delco Starter # 736C, 737B, 737G, 1107067, 1107074, 1107093, 1107169, 1107174, 1107404, 1107407, 1107408, 1107427, 1107430, 1107435, 1107444, 1107448, 1107462, 1107487, 1107490, 1107926, 1107999, 1108012, 1108016, 1108038, 1108041, 1108060, 1108080, 1108092, 1108097, 1108103, 1108112, 1108142, 1108158, 1108173, 1108174. Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Part No: 1871662)
$52.96

Starter Drive - Starter drive, services Delco starters: 1108640, 1113176, 1113439, 1113649, 1108646, 1113197, 1113440, 1113684, 1113034, 1113398, 1113489, 1113685, 1113053. 10 teeth For 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 186, 21206, 21256, 21456, 2706, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 400, 4166, 4186, 450, 6388, 650, 6588, 660, 6788, 706, 756, 766, 786, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186 (Part No: 1877350)
$35.43

Starter Drive - Replaces; 1877350, 1948877, 1933838, 800965. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21456, 21256, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 350, 3588, 3688, 3788, 4166, 4186, 450, 560, 6388, 6588, 660, 6788, 706, 756, 766, 786, 806, 815, 826, 856, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 3488. With spiral shaft. (Part No: 1651487C1)
$36.14

Starter Drive - This Starter drive fits gas engines for the following models: A, B, C, H, M, Super A, Super C, Super H, W4, W6, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450 Replaces OEM# 1107021, 1107412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 1107408, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. (Part No: 565549)
$21.56

Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Part No: 1878661)
$35.65

Starter Drive, Improved Style - This improved style starter drive is a positive ratchet style. For A, B, C, H, M, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450, Super A, Super C, W4, W6 all using the following starters 1107021, 2207412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 11074808, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Part No: 565549-New)
$20.01

Starter Switch - Momentary Push Button Ignition Switch. Rubber boot covers push button, 2 screw type terminals, used extensively on I.H. equipment. Serves as starting, horn or reverse lock out switch. Used on various combines, windrowers, balers, cotton pickers, hay conditioners and grain platforms. Also used on Tractors: IHC: Fits: 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 606, 656, 660, 706, 806, 4100, 4156, 4166, 4186; Industrial: 1206, 2656; Crawler: T4, T5, TD5. Replaces 366317R91, 366317R93GV (Part No: 366317R93)
$6.69

Starter with Solenoid, Delco - This starter is 6 Volt, 10 tooth, counter clockwise rotation. For tractor models (300 Farmall), (350 up to serial number 13242 with gas), (400 gas), (450 serial number 501-11083 gas). Replaces: Delco 1107542, 1108038, 1108041, 1108060, 1108092, 1108621 or CASE/IH: 361782R91. A Refundable $50 core charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 361982R91)
$253.09

Starter, 12 V - DELCO type, 12 volts, counter clockwise rotation, teeth 10. Tractors: 350 Utility IHC C-175 Gas/LPG 1954 to 1957, 350HC Utility IHC C-175 Gas/LPG 1954 to 1957, Farmall 350 IHC C-175 Gas/LPG 1956 to 1958, Farmall 350HC IHC C-175 Gas/LPG 1956 to 1958, Farmall 450 IHC C-281 Gas/LPG 1956 to 1958, Farmall 450HC IHC C-281 Gas/LPG 1956 to 1958, International W-450 IHC C-281 Gas/LPG 1956 to 1958. +++ Add $50.00 Core charge. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1108173)
$284.38

Terminal Clip - Light terminal plate with screws. For 200, 230, 300, 330, 350, 400, 450, 600, 650, A, B, C, H, HV, M, MD, O4, O6, ODS6, OS4, OS6, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super WD9, Super WDR9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S (Part No: 79407H)
$12.02

Tune Kit - This Tune Kit is for IH Distributors - NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Autolite Spark Plugs (AL386), Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: IHTK1)
$18.71

Tune Kit, Basic - This Basic Tune Kit is for 4 cylinder gas engines with battery ignition from 1951 thru 1962 with IH distributor (NOT for Prestolite), kit contains rotor, condenser, points, and proper point gap guage. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, A, B, C, Cub 1962 and earlier, H, M, Super A, Super C, Super H, Super M, Super MTA, W4, W6. (Part No: ATK5BIR)
$15.30

Tune Kit, Comprehensive - This Comprehensive Tune Kit is for 4 cylinder gas tractor models A, AV, B, BN, C, Cub, Cub 154 Lo-Boy, Cub 185 Lo-Boy, Super A, Super AV, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, H, HV, 4, 444, Super H, Super HV, Super W4, 300, 350, M, 6, Super M, Super MTA, Super W6, W6-TA, 400, 450. All with IH Distributor, not for Delco Distributor. Kit contains Autolite spark plugs (AL 386), points, condenser, rotor, gap gauge, (IHTK1) distributor cap (351693R92) and set of universal plug wires (CPN12259). NOT FOR USE ON EARLY MODELS WITH A MAGNETO. Verify correct spark plug size and type. (Part No: IHTUNEKIT)
$37.01

Wiring Harness Kit - Farmall Rowcrop: 400 Gas Rowcrop, 450 Gas Rowcrop To Sn: 11083. For generator systems only. Cotton braided, exactly like original. Includes headlight, wires. All terminals soldered and sealed. Replaces: 362007R91, 362011R91, 362012R92, 366318R91. (Part No: R4153)
$249.50

Wiring Harness, Headlight - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models 300, 350, (400, 450 gas or diesel). (Part No: 362011R91)
$59.34

Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For model 450. (Part No: 368571R91)
$165.60

Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models (400, 450 with 18 gallon fuel tank). (Part No: 362007R91)
$129.72

Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models (400, 450 with 21 gallon fuel tank). (Part No: 365758R91)
$132.48

Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models (400, 450 with diesel engine). (Part No: 362008R91)
$179.40

Wiring Harness, Rear Light - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models 300, 350, (400, 450 gas). (Part No: 362012R92)
$55.20

Engine Bearings
Bearing Cup - Inner cup for bearing kit FW112FS. For tractors HV, Super HV, MV & MDV, O6, ODS6, W6, WD6, Super W6 & WD6, 400, 450. For 400, 450, HV, MDV, MV, O6, ODS6, Super HV, Super MDV, Super MV, Super W6, Super WD6, W6, WD6 (Part No: ST882)
$12.77

Cam Bearing Set - 3 bearings. For tractor models 400, (450 with C281 engine), M, MTA, MV, O6, OS6, Super M, Super W6, W400, (W450 with C281 engine), W6, W6TA. (Part No: CBS248)
$35.04

Cam Bushing Set - For D207 Diesel engine. Complete for 1 engine. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580CK, 580C, 580D. (Part No: CBS207)
$23.77

Main Bearing Set, C248 C264 & C281 Gas Engine - Available in standard, .010 and .020. You will be sent standard unless you specify otherwise (specify in Comments Box when ordering). Used on C248 CID Gas and Distillate 4-cylinder engine: Models M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. C264 CID Gas 4-cylinder engine: Models Super M and MTA, Super W6 W6-TA, 400, W400. C281 Gas engine: Models 450 and W450. (Part No: MBK264)
$83.70

Rod Bearing Set, C248 Gas or Distillate Engine - STD - Available in standard, .010 or .020. Connecting Rod Bearing Kit (C248 CID Gas and Distillate 4-cylinder engine). Rod Journal diameter 2.5475 inch. Model M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. (C264 CID Gas 4-cylinder engine.) Models Super M and MTA, Super W6 and W6-TA. (C264 CID Gas 4-cylinder engine) Models 400 and W400. Models Super 400 and W400 with serial number 163808 and up. (C264 and C281 CID Gas 4-cylinder engine) Models 450 and W450 with C281. Specify size of standard, .010 or .020 in "comments box" when ordering. (Part No: CRK264)
$53.41

Rod Bearing Set, C248 Gas or Distillate Engine, .002 - Connecting Rod Bearing Kit (C248 CID Gas and Distillate 4-cylinder engine). Rod Journal diameter 2.5475 inch. Model M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. (C264 CID Gas 4-cylinder engine.) Models Super M and MTA, Super W6 and W6-TA. (C264 CID Gas 4-cylinder engine) Models 400 and W400. Models Super 400 and W400 with serial number 163808 and up. (C264 and C281 CID Gas 4-cylinder engine) Models 450 and W450 with C281. (Part No: CRK264-002)
$59.48

Rod Bearing, STD - Single - Sold individually. For tractor models 400, (450 with C281 engine), (M, MV serial number 278050 and up), MTA, (O6, OS6 serial number 35464 and up), Super M, Super W6, W400, (W450 with C281 engine), (W6 serial number 35464 and up), W6TA. (Part No: 356957R11)
$15.24

Engine Gaskets
Crank Seal, Front - This front crankshaft oil seal has a 2.625 inch Inside Diameter, a 3.38 inch Outside Diameter and is .475 inch wide. It Fits: I6, I9, ID6, ID9, M, MD, MDV, MV, O6, ODS6, OS6, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, T6, T6-61, T9, TD6, TD6-61, TD9, TD9-91, W400, W450, W6, W9, WR9, WR9S, 400, 450, 600, 650, B-450, BM, BMD, SBMD, Super BM. Replaces: 258511R91, 357972R91, 357977R91, 358511R91, 53872D, 410708 (Part No: 357972R1)
$11.25

Crank Seal, Rear, Gas - Rear crankshaft seal for gas engines. For tractor models 400, 450, M, MTA, MV, O6, OS6, Super M, Super W6, W400, W450, W6, W6TA. All with 248, 264, or 281 CID gas engines. Priced each half. Price shown is for each, sold only in multiples of 2 items. (Part No: 57613DA)
$7.60

Gasket Set, Full - Complete Gasket Set with seals (C248 CID Gas and Distillate 4-cylinder engine). Models M and MV, O6, OS6, W6 and (C264 CID Gas 4-cylinder engine. Stepped head high compression pistons.) Models Super M and MTA, Super W6 and W6-TA, 400, W400, 450, W450. (Part No: GK7510S)
$132.67

Head Gasket Set - For C248 and 264 CID distillate 4 cylinder engine in tractors M and MV to serial number 278049, O6, OS6, W6 to serial number 35463. For tractor models 400, 450, M, MV, O6, OS6, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6. (Upper gasket set with head gasket). Replaces VGK7510S. (Part No: VGK7510S)
$57.93

Head Gasket Set - This Head Gasket Set has a Head Gasket with an inside diameter of the fire ring at 4.430. Used on International D248, D264, D281 4 Cylinder Diesel Engines. It replaces 305805R1, 305805R2, 87427495, 119206A1, 225604A1, 52019D, 52649D, 8277DX, 52650DC, 45986DA, 45984DA. (Part No: 787427495)
$285.49

Manifold Gasket Set - This Manifold Gasket Set is used with 358308R11 manifold. Replaces Manifold Gasket: 46173DC, Carb Gasket: 21632D, 31336D, 530681R2. MS2620 (Part No: R0055G)
$8.25

Oil Pan Gasket - For tractor models 400, 450, M, MV, O6, OS6, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6. (Part No: 46109DA)
$11.82

Rear Crankshaft Seal Kit - Fits tractor models I6, M, MTA, MV, O6, OS6, Super M, Super MV, Super W6, Super W6TA, T6, T6-61, U6, W6, 400, 450 (Gas or LP), Wheatland: 400, 450 (Gas or LP); Replaces: Contains two: 57613DA, (subs for 46134D): 46134DA, (sub for 46131DA): 46131DB, Contains two (sub for 46121D): 46121DA, Contains two (sub for 379617R91, 379618R91 and 842578R91): 25093DA (Part No: IHS2641)
$34.95

Upper Gasket Set - For tractor models with the C264 and C281 engines 400, 450, W450, M, MTA, MV, O6, OS6, Super M, Super W6, W400, W6, W6TA.HGS248 (Part No: VGK7510S)
$57.93

Valve Cover Gasket - Used on M, Super M, 400, 450 and other equipment with International Gas Engines C248, C264, C281. Replace original part number 45952DB, 45952DC, 45952DA 68040D, 842578R95. (Part No: 45952DB)
$10.50

Water Jacket Gasket - For tractor models 400, 450, M, Super M, Super MTA with C264 gas engine. (Part No: 46128DB)
$5.12

Engine Rebuild Kits
Basic Engine Overhaul Kit, Less Bearings - For tractor models 400 and W400 with serial number 163808 and up. (C264 CID Gas 4-cylinder engine. Stepped head pistons. Piston pin diameter 1 inch) and models 450 and W450 with C281 engine. Kit contains sleeves and sleeve seals, pistons and piston rings (standard 4-1/8 inch bore), pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Part No: BEKH1168-LCB)
$1055.20

Basic In-Frame Engine Kit - For tractor models Super 400 and W400 with engine serial number 163808 and up. (C264 CID Gas 4-cylinder engine with stepped head pistons and piston pin diameter 1 inch) and models 450 and W450 with C281 engine. Kit contains complete sleeve and piston kit with rings (standard 4-1/8 inch bore), pins and retainers, upper gasket set (with head gasket) and pan gasket. (Part No: BIFH1168)
$413.90

Engine Overhaul Kit, Comprehensive - Less Bearings - For tractor models 400 and W400 with C264 gas with engine srial number 163808 and up. Stepped head pistons. Piston pin diameter 1 inch) and models 450 and W450 with C281 engine. Kit contains sleeves and sleeve seals, pistons and piston rings (4-1/8 inch standard bore), pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Part No: EOK1168-LCB)
$1098.94

Engine Overhaul Kit, In Frame - Overbore from 4 inch to 4-1/8 inch Stepped head pistons using 1 inch diameter piston pins. For 4-cylinder gas C264 and C281 engines in: W400 (C264 engine serial number >163808), W450 (C281 engine), 400 (C264 engine serial number >163808), 450 (C281). Kit contains: pistons, rings, liners, rod bearings (specify size of standard, .002, .010, .020 in Comments Box when ordering), upper gasket set (with head gasket), pan gasket. (Part No: IK281)
$608.14

Engine Overhaul Kit, Major - Overbore from 4 inch to 4-1/8 inch stepped head pistons using 1 inch diameter piston pins. For 4-cylinder gas C264 and C281 engines in: W400 (C264 engine serial number >163808), W450 (C281 engine), 400 (C264 engine serial number >163808), 450 (C281). Kit contains: pistons, rings, liners, main bearings (standard, .010, .020), rod bearings (standard, .002, .010, .020) specify bearing sizes in Comments Box when ordering, rod bushings, camshaft bearings, upper gasket set (with head gasket), lower gasket set with seals. (Part No: OK281)
$1073.81

Valve Overhaul Kit - Cylinder HEAD Overhaul Kit. For 400, 450, W400, W450. Includes intake valves, exhaust valves, valve guides, valve springs and valve locks. (Part No: VOKH281)
$185.61

Valve Train Kit - Includes intake, exhaust valves, springs, guides and keepers. For tractor models (400, W400 unless you have C264 engine then serial number above 163808), (450, W450 with C281 engine). (Part No: VTK223)
$223.56

Engine Parts
Camshaft - With nut and washer. For tractor models M, Super M, 400, 450 Gas. (Part No: 48196DBX)
$296.01

Camshaft Gear - 58 teeth. For tractor models M, MV, Super M, Super MTA, Super MV, 06, T-6, W-6, Super W-6, 400, and 450, all with the C248, C264, and C281 gas engines For gas powered tractors. Replaces: 6760D, 6760DB. (Part No: 6760DB)
$137.31

Connecting Rod Bolt Lock Tab - For Diesel models: I9, ID6, MD, MDV, ODS6, Super MD, Super MDV, Super MDV-TA, Super MTA, 400, 450, Super W9, T9, TD6, TD9, W9, WD6, WR9, WR95. GAS & LP: 600, 650. (Part No: 253220R1)
$3.91

Connecting Rod Bolt Lock Tab - .490 inch bolt hole diameter, 8 used per engine, sold individually. For tractor models (I6, M, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, T6-61, W6, 400, 450 gas, LP with C248, C264 and C281 engines 8 used), (WD9, WDR9 early diesels up to engine serial number 10265 16 used). (Part No: 47496DB)
$5.93

Crankshaft Gear - 29 Teeth. Fits the M, MV, Super M, Super MTA, Super MV, O6, T-6, W-6, Super W-6, 400, and 450, all with the C248, C264, and C281 gas engines. (Part No: 45627D)
$91.19

Cylinder Head Stud - 1/2 inch x 7 1/16 inch. For gas and LP Models: I6, M, MTA, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, T6, U6, W6, 400, 450. (Part No: 49023DA)
$13.37

Cylinder Head Stud - 1/2 inch x 6 7/8 inch. For gas and LP Models: I6, M, MTA, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, T6, U6, W6, 400, 450. (Part No: 46117D)
$13.20

Governor Spring - This Internal Governor Spring is 2.700 inches overall length with 0.110 inch wire diameter. It fits H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, T6, T9, W4 Through 9 Series, W6, W6TA, W9, WR9, WR9S, 300, 350, 400, 450, 600, 650, Wheatland: 400, 450. It replaces original part numbers 357012R1 and 49407DBX. (Part No: 49407DBX)
$9.25

Governor Throttle Shaft Rebuild Kit - This Governor Throttle Shaft Rebuild Kit fits: H, HV, I4, I6, M, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, T6, T6-61, U4, U6, W4, W6, 300, 350, 400, 450 all Gas and LP. Replaces: Cotter pin: 103361, Pin: 103494, Groove pin: 142952, Bushing: 45696D, Felt washer: 48493D, Lever: 6288D, Gasket: 48501D, 53877DB, 66272DA. Kit includes: lever, bushing, felt washer, (3) gaskets, groove pin, cotter pin, and pin. (Part No: IHS2559)
$43.43

Hand Starting Crank - For tractor models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450. Hand Starting Crank with Spinner. (Part No: 51544DBX)
$69.00

Ring Gear, Flywheel - For tractor models M, MD, 0DS6, Super M, Super MD, Super W6, WD6, W400, W450, W6, 400, 450, (560, 660 ALL DIESEL ONLY). This ring gear has 125 teeth, 15.72 inch outside diameter, .80 inches wide. (Part No: 266142R1)
$75.90

Valve Service Kit - Cylinder HEAD Service KIT For gas models 400, 450, M, MV, O6, OS6, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6. Contains: springs, guides, locks, (no valves). (Part No: VSKH264)
$72.20

Valve, Exhaust Set - Set of 4 Exhaust Valves For tractor models 400 & W400. Check engine type. Will NOT work for LP engines. (Part No: 362436R1)
$132.15

Valve, Intake Set - Set of 4 Intake Valves For tractor models 400 & W400, 450, W450. Check Engine type. Will NOT work for LP engines. (Part No: 362435R1)
$58.02

Engine Pistons and Sleeves
Pin Bushing - Piston pin bushing, 4 used per engine. For C264 CID gas 4 cylinder engine in tractors 400 and W400 serial number 163808 and up, and C281 in tractors 450 and W450. For 400, 450, W400, W450. (Part No: 364921R1)
$119.74

Piston Liner Kit - Is a 4 1/8 inch bore and is a kit for 1 hole. Four required per tractors. For tractor models (400, W400 with C264 engine serial number 163808 and up), (450, W450 with C281). (Part No: SK280)
$128.71

Piston Sleeve - Overbore from 4 inch to 4-1/8 inch. For Gas tractor models 400, 450, MTA, Super M, Super W6, W400, W450, W6TA. (Part No: SD152)
$58.01

Engine Rings
Piston Ring Set - Ring set for 4 pistons, 1 used per engine. Contains 3 compression 3/32 and oil ring 1/4 for each cylinder. For C264 CID gas 4 cylinder engine in tractors 400 and W400 serial number 163808 and up, and C281 in tractors 450& W450. For 400, 4500, W400, W450. (Part No: PRS168)
$53.88

Exhaust System
Exhaust Stack, Chrome, Curved - Double wall. 2 3/8 inch inlet inside diameter, 27 inches overall length, 3 1/2 inches outside diameter. For tractor models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450, 460, 560. (Part No: R4451)
$127.17

Exhaust Stack, Chrome, Straight - Double wall, 2 3/8 inch inlet, 3 1/2 inch outlet, 24 inches overall length. For tractor models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450, 460, 560. (Part No: R4450)
$114.61

Manifold - Intake/exhaust manifold, inlcudes outlet pipe, carburetor gasket and manifold gasket. Heavy duty replacement for gas tractors. For tractor models 400, 450, 6, M, Super M, W400, W450. Replaces: 362437R21, 8035DBX, 8035DCX, 8035DD, 8035DDX (Part No: 362437R21)
$172.04

Manifold - For Propane Tractors. Can also add performance when used on Gasoline Tractors. For gaskets, order part number R0055G. For short exhaust pipe, order part number R0055P. This manifold is used on Propane Head part number R5995. For tractor models 450, M, Super M, Super MTA, W6, Super W6, 400, MV, O6, Super MV, T6, W400. (Part No: 358308R11)
$262.20

Manifold Gasket - This Manifold Gasket Set is used with 358308R11 manifold. Replaces Manifold Gasket: 46173DC, Carb Gasket: 21632D, 31336D, 530681R2. (Part No: R0055G)
$8.25

Manifold Pipe - Can be used with the following manifolds 362437R21, 161158A, 161818A, 761615M91, 4512715, R0947, L415. For tractor models M, Super M, W6, T6, 400, W400, 450, W450. (Part No: R0055P)
$19.70

Muffler - Vertical muffler for tractors. 6 inch round body replaces oval body mufflers. inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, total length 29 inches, diameter 6 inch round body. For gas tractor models: H and Super H, M and MV Super M and Super MTA, W4 and Super W4, W6 and Super W6, W6TA, (300 and 350 with C-175 gas), (400 and 450 with C-281 gas or D-281 diesel), (460 and 606 with C221 gas or D-236 diesel), (560 with C-263 gas or D-282 diesel). Replaces: 350601R95, 370773R91, 403551R1. (Part No: 403551R1)
$28.38

Muffler - Vertical muffler for gas tractor, fits engines C221 and C263. Inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, length 29 inches, diameter 6 inches, round body. Uses MC212 Muffler Clamp. For tractor models 450, 606, 2606, 656, 2656. Diesel engines D166, D188, D236, D282, models 340, 504, 2504, 3514, For 2500, 2504, 2606, 2656, 340, 3514, 3616, 450, 460, 504, 606, 656. (Part No: 370644R92)
$28.12

Muffler Clamp With Hardware - Muffler clamp with hardware. For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660, 706, H, HV, M, MD, Super H, Super HV, Super M, Super MD, Super MTA, Super W6, W4, W6, WD6. (Part No: 350602R1)
$11.50

Muffler Oval - Muffler. Vertical muffler for tractors. 6 inch. Oval body replaces oval body mufflers. Inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, total length 29 inches, diameter 6 inch round body. For gas tractor models: H and Super H, M and MV Super M and Super MTA, W4 and Super W4, W6 and Super W6, W6TA, (300 and 350 with C-175 gas), (400 and 450 with C-281 gas or D-281 diesel), (460 and 606 with C221 gas or D-236 diesel), (560 with C-263 gas or D-282 diesel). (Part No: 403551R1-OVAL)
$83.01

Vertical Muffler - Stainless Steel. Also replaces 251116R92, 360078R91, 357288R92, 350601R94, 355870R91, 350601R93. For tractor models M, MD, MV, Super M, Super MD, Super MTA, Super W6, Super WD6, TD6, W6, WD6, 400, 450. Polished stainless steel can and most likely will discolor from extreme heat. Replaces: 251116R92, 350601R93, 350601R94, 355870R91, 357288R92, 360078R91, 45805DB (Part No: 45805DB)
$137.10

Fuel System / Air Intake
Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: M, MD, WR9S, Super WD9, 400, 450, W400, W450, 460, 504, 544 diesel, 455 diesel, 2544 diesel, 5606, Gas powered combines: 403 and 453 Hillside, 503, 615, 715. Can replace Donaldson P02-0227, also replaces 101965A, 10P871, 1125804, 1508881M1, 3119347, 365413R1, 71125804, 73186, 73533, 80073533, C0NN9A663A, F3446R, L60631, R28794 (Part No: R28794)
$6.26

Air Cleaner Cap, Fits INSIDE pipe - For tractor models M, MD, Super M, Super MTA, W6, WD6, Super W6, 400, 450. (Part No: R4748)
$31.43

Air Cleaner Pipe - 2-1/4 inch outside diameter. For tractor models M, MV, Super M, Super MV, MTA, Super MV-TA, (Super W6 serial number 3951 and up), Super W6-TA, 400, 450, W400, W450 all gas or LP. Replaces 51441D. (Part No: 357028R1)
$36.75

Carburetor Drain Trough - This Carburetor Drain Trough is used on tractors with F8 starting diesel carburetors. Replaces 58843DX. (Part No: 58843DX)
$47.50

Carburetor Float - Float. For Updraft International Carburetors with throat size 1-1/4 inch or 1-3/8 inch. Dimensions: 2 3/16 inch length x 1 3/16 inch height, outside diameter 3 1/2 inches. For 2606, 2706, 300, 350, 400, 450, 460, 560, 600, 606, 650, 660, 706, M, MV, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6, W9, WR9, WR9S. (Part No: 47398DX)
$18.45

Carburetor Float Valve Assembly - This is a new Carburetor Float Valve Assembly with stainless steel needle. It us used on F8 Diesel Starting Carburetors (53873DH, 67860DCM). (Part No: 32581DXB)
$58.65

Carburetor Fuel Line Fitting With Strainer - Fits INTERNATIONAL carburetors: 356948R92, 35865R91, 366066R91, 367258R92, 367259R92, 372723R92, 378196R94, 379813R91, 380956R91, 381984R91, 388297R92, 388424R92, 388425R96, 390082R92, 396197R93, 45108DB, 45108DC, 50981DA, 50981DB, 50983DB, 52714D, 52814DA, 52815D, 52815DA, 533622R91, 53873DF, 53873DH, 539575R91, 56543DE, 60329DA (Part No: 29902DX)
$15.00

Carburetor Gasket Set - This Gasket Set is used on F8 Diesel Starting Carburetors (53873DH, 67860DCM). Contains 32606DD, 53459DA (Part No: IHS997)
$19.63

Carburetor Kit, Basic - For M, MV, 6 Dist. with OEM number 47387DB, or with OEM number 50983DB. For Super M, MTA with OEM number 356948R92. For W9, WR9 with OEM number 52814D, 52815D and 60329DA. For 300, 350, 400, 450 all with OEM number 361525R92, 361525R91. (Part No: BK12V)
$19.20

Carburetor Kit, Complete - For IH Carb number 362173R92 - Includes all parts shown. For 400, 450 Tractors. (Part No: R7859)
$41.40

Carburetor Kit, Comprehensive - Comprehensive Carburetor Kit For IH Carb number 362173R92, 362173R91. Used on 400, 450. (Part No: R7860)
$68.31

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 362173R91. For the following tractor models: 400, 450. Add $100.00 core charge to price (will be added after order is placed when ordering online) - you will receive instructions for returning your core for a refund if you have one available. (Part No: 1426-CARB)
$207.50

Choke Cable - 71 inches total length. For tractor models (Farmall 400, 450), 460 Grove, (Farmall 560 serial number 14819 and up, IH 560 serial number 2071 and up), (660 serial number 1349 and up), (706, 756, 806, 826, 856 all LP). Replaces 363710R93. (Part No: 374218R92)
$14.85

Diesel Fuel Filter - Fuel filter element, cartridge type, final. For tractor models 400, 450, 600, 650, MD, ODS6, Super MD, Super WD9, W400, W450, WD6, WD9. (Part No: 259479R92)
$6.49

Diesel Fuel Pressure Gauge - Zone Style - with IH Logo For MD, Super MD, Super MD-TA, 400, 450 (Part No: R4185)
$46.46

Fuel Cap - For A, Super A, AV, B, BN, C, Super C, H, Super H, M, Super M, Super MTA, Cub, Cub Lo-Boy, 100, 130, 200, 230, 300, 350, 400, 450. Tall Cap is 2 1/2 inches tall, Triple Baffle Style. Replaces 361910R1, 23995DC (Part No: R3654)
$23.25

Fuel Cap - 1 15/16 inch overall outside diameter fits many: 240, 300, 350, 400, 450, 600, 650, H, HV, M, MD, MDV, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super W6, Super WD6, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Part No: 40756D)
$7.50

Fuel Cap - Black - (Vented) - Black Fuel Cap. REPLACES : 361910R91, 538063R1, 224839C91, 224839C92. Fits MOST: A, C, Cub, Cub Lo-Boy, Cub 185-Lo-Boy, H, M, MD, Super A, Super C, Super H, Super M, Super W4, Super W6, W6, W9, 100, 130, 140, 184, 200, 230, 300, 330, 340, 350, 400, 403, 404, 424, 444, 450, 460, 503, 504, 544, 560, 606, 615, 656, 706, 715, 756, 766, 806, 815, 826, 856, 915, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1640, 1660, 1670, 1680, 2404, 2424, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 4166, 4186. Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. (Part No: 23995DC)
$7.31

Fuel Cap, Vented - For MOST Models: A, Super A, B, C, Super C, H, Super H, M, Super M, Cub, 100, 130, 200, 230, 300, 350, 400, 450. Says Buy Clean Fuel . Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. Replaces IHS226, AR369R, AD709R, AH83351, B824, 7A824, 161945A, 30-3049558. (Part No: 23995DA)
$4.32

Fuel Line - For tractor models 400, W400, 450, W450. Fuel Line, Metal pipe from fuel strainer to carburetor with two nuts and 18 gallon fuel capacity. Restoration quality. (Part No: 362558R11)
$47.87

Fuel Line - Fuel Line is Metal pipe from fuel strainer to carburetor with two nuts. Restoration quality. For tractor models 400, W400, 450, W450 with 21 1/2 gallon fuel capacity. (Part No: 365339R1)
$32.76

Governor Shaft - Governor Throttle Rod To Carburetor. For 400, 450, M, MV, O6, OS6, Super M, Super W6, W400, W450, W6. (Part No: 49788DXA)
$29.95

Precleaner Assembly - Complete, glass dust bowl assembly, 2-1/4 inch inside diameter base, just like the original. For tractor models M, MD, Super M, MTA, W6, WD6, I6, O6, ID6, OS6, ODS6, Super WD6, 400, W400, 450, W450. (Part No: 59096D)
$96.53

Precleaner Bowl - Glass bowl for pre-cleaner assembly 59095D, 59096D. (Just like the original). Tractors: H, Super H, HV, I4, O4, OS4, W4, Super W4, 300, 350, M, MD, Super M, MTA, W6, WD6, I6, O6, ID6, OS6, ODS6, Super WD6, 400, W400, 450, W450. (Part No: 54082D)
$14.43

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 13194D, 25854, 49923D (Part No: 49923D)
$3.09

Gauges
Amp Gauge - D-O-C Style - with IH Logo For Super A, Super C, H, Super H, M, Super M, Super MTA, Cub (From 1955), W4, W6, 200, 230, 240, 300, 350, 400, 450. Replaces 393334R91, 378424R91, 360053R92, IHS395. (Part No: 360053R91)
$9.42

Fuel Gauge Cap - This vented fuel cap has a built in gauge. Overall length is 17 1/4 inches. Uses gasket part number 23977DA - sold separately. For models 300, 350 row-crop and utility, 400 up to serial number 38332 with 18 gallon tank, 450 and W450 with 18 gallon tank. (Part No: 365495R91)
$129.03

Fuel Gauge Cap Gasket - Gasket fits our Fuel Gauge Cap part numbers 365498R91, 365495R91 and 365499R91. (Part No: 43984D)
$2.33

Oil Gauge - 75 pound, IH logo in center. For tractor models 300, 350 Utility diesel, 400, 450 Farmall diesel, (460, 560, 660 with D236 engine). (Part No: 362177R94)
$13.88

Oil Pressure Gauge - 0-75 Style - with IH Logo with Studs For 300, 350, 400, 450 (Part No: 362036R91)
$14.16

Tachometer - his Tachometer fits Gas and LP Tractors: 400, 450 (Farmall Rowcrop: 300, 350 will work for GAS, LP and Diesel, but not exactly like the original. The RPM will read correctly, The PTO and ground speed is in a different location), Wheatland: 400 W400, 450, W450. NOTE; This is an aftermarket replacement gauge. The mounting studs on the back of this gauge are 2-5/8 inches center to center. It will not fit the 2-3/4 inch spacing of the original bracket without modifying the bracket. For a Tachometer that does not require this modification to your bracket, order 364393R91-OE (Part No: 364393R91)
$48.29

Tachometer - For tractor models: 400, 450, W400, W450 all with diesel engines. NOTE; This is an aftermarket replacement gauge. The mounting studs on the back of this gauge are 2-5/8 inches center to center. It will not fit the 2-3/4 inch spacing of the original bracket without modifying the bracket. For a Tachometer that does not require this modification to your bracket, order 364395R91-OE (Part No: 364395R91)
$46.78

Tachometer Cable - 66 inches long. For tractor models 340, 400, 450. (Part No: 364396R91)
$41.40

Tachometer Cable Connector - This new tachometer cable connector housing retainer clip (Thrust Stop) is used to retain part numbers 369695R1 (Tachometer Drive Assembly) and 369692R1 (Tachometer Cable Connector) into part number 363749R91 Distributor Housing Drive. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces: 369693R1. (Part No: 369693R1)
$2.50

Tachometer Cable Connector Housing - This New Tachometer Cable Connector Housing is used with 369695R1 Nylon gear with metal shaft. Will also need to order tach drive gear 369695R1 & 369693R1 clip for 300, 330, 350, 400, 450, 600, & 650 if replacing ALL NYLON gear/shaft drive. Fits Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces 369692R1 (Part No: 369692R1)
$43.96

Tachometer Connection Housing Plate - Tachometer Connection Housing Plate with gasket. Used with part number 363749R91 distributor housing. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces: Plate: 363817R1, Gasket: 363814R1, 363814R2. (Part No: 363817R1)
$7.95

Tachometer Drive Assembly - This new Tachometer Drive Assembly is used with part number 363763R11 cast distributor mounting housing with provision for drive. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. For IH distributor systems only. This part does not replace all nylon style gear/shaft number 363816R1 that was original on 300, 330, 350, 400, 450, 600, 650, unless the connector housing part number 369692R1 is ordered along with the 369693R1 clip. Replaces: 369695R1, 369695R91. (Part No: 369695R1)
$51.29

Tachometer Mounting Bracket - This new Tachometer Mounting Bracket fits; 300, 350, 400, 450 gas or diesel. Replaces: 364376R1 (Part No: 364376R1)
$39.50

Tachometer, Diesel - For tractor models: 400, 450, W400, W450 all with diesel engines. This gauge is accurate of the original. Outside of the gauge is painted red. 2-3/4 inch stud spacing. Fits 364376R1 bracket, not included. Replaces 364395R91 (Part No: 364395R91-OE)
$163.53

Tachometer, Gas and LP - This Tachometer fits Gas and LP Tractors: 400, 450 (Farmall Rowcrop: 300, 350 will work for GAS, LP and Diesel, but not exactly like the original. The RPM will read correctly, The PTO and ground speed is in a different location), Wheatland: 400 W400, 450, W450. Used with bracket 364376R1, not included. 2-3/4 inch stud spacing. Replaces: 364393R91 (Part No: 364393R91-OE)
$122.13

Water Temperature Gauge - For tractor models: C, Super C, 200, 230, 300, 350, 400, 450, 460, 560, 660. Water Temperature Gauge with 72 inch Lead, "IH" Logo. Replaces 393481R91, 393476R91, 369849R91, 53690R2, IHS531. (Part No: 353868R91)
$29.73

Hitch / Drawbar
Crank Handle, Lift Arm Screw - 3 point or fast hitch. For tractor models 230, 330, 400, 450, 560, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, International Utility: 300, Farmall Rowcrop: 300, International Utility: 340, Farmall Rowcrop: 340, International Utility: 350, Farmall Rowcrop: 350, International Utility: 404, Farmall Rowcrop: 404, International Utility: 460, Farmall Rowcrop: 460, International Utility: 504, Farmall Rowcrop: 504, International Utility: 544, Farmall Rowcrop: 544, International Utility: 606, 656, Farmall Rowcrop: 656, Hydro 100, Hydro 70, Hydro 86. (Part No: 523861R2)
$12.02

Drawbar Pin Retainer Plate - Used on the following Farmall / International models: H, M, 560, 806, 1066, MD, MTA, W6TA, W9, O4, WD9, WR9, Super WDR9, OS4, Super H, Super M, Super MD, Super MTA, Hydro 84, Super W4, Super W6, Super W6TA, Super WD6, Super WD9, W4, W6, WD6, WDR9, WR9S, 300, 330, 340, 350, 400, 450, 454, 460, 464, 504, 544, 574, 600, 606, 650, 656, 660, 664, 666, 674, 706, 756, 766, 826, 284, 856, 966, 1026, 385, 484, 584, 684, 686, 784, 884, Super MDTA, Super WD6TA, Super WR9S, Super W9, WD6TA, this part measures 1.480 inces long, 1 inch wide and has a 0.377 inch hole diameter and 0.193 inch thick. Many of the listed models used a round plate rather than the rectangular one. This part will replace the round version. Replaces OEM numbers 132794H1, 491390, 49139D, 57654D, 57655D, 58657D (Part No: 49139D)
$8.63

Drawbar Pin, Front - For tractor models with swinging drawbar, 400, 450, 560, 660, M, MD, Super M, Super MD. (Part No: 58657DA)
$22.56

Latch Spring, Lower - For use with latch 393500R1. For tractor models HYDRO 100, HYDRO 70, HYDRO 86, 1026, 1066, 1206, 130, 140, 1466, 200, 230, 240, 300, 330, 340, 350, 400, 450, 460, 504. 3.57 inches long. Replaces 522840R1. (Part No: 522840R2)
$6.12

Latch Spring, Upper - For use with latch 393500R1. For tractor models HYDRO 100, HYDRO 70, HYDRO 86, 1026, 1066, 1206, 130, 140, 1466, 200, 230, 240, 300, 330, 340, 350, 400, 450, 460, 504. 4.36 inches long. (Part No: 522839R1)
$12.84

Leveling Screw, RH/LH - .875 inch diameter, 15.750 inches long. For tractor models 2504, 2606, 300, 330, 340, 400, 450, 460, 504, 560, 606, 660. (Part No: 523864R11)
$64.54

Swinging Drawbar Pin - For tractor models H, Super H, M, Super M, 300, 330, 340, 350, 400, 450, 460, 560, 660. (Part No: FOH450)
$35.98

Three Point Hitch - This 3-point hitch kit fits Rowcrops and Utilities without fast hitch. It also allows use of original draw bar. Kit includes (Cat # 1 on tractor end & Cat # 2 on equipment end, and 2 hydraulic 2 way cylinders, but does not include hoses. Please note, this hitch exceeds size limitations for UPS. This hitch kit must ship via LTL freight truck. Additional $50.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: IHS3009)
$1193.70

Hydraulic System
Hydraulic Manifold - Hydraulic Pump Flange, Hydraulic Manifold, Port Block is used on (M, Super M, 400, 450 Gas or Diesel), Super W6, Super W9, Super WD6, Super WD9, W6, W9, WD6, WD9, 600, 650. 3/4" NPT inlet and outlet. Threaded for hydraulic hose. Must use rubber hose lines. (Part No: IHS1240)
$58.65

Hydraulic Pump - For block style lines that mount to bottom of pump. This is a cast aluminum style and will not directly replace cast iron style (it will replace if you have a plate manufactured to adapt the type of hose connections as is on your old pump). For tractor models Super M, Super MTA, Super W6, Super W9, 400, 450. All Gas with Live Hydraulics. Replaces 128190C91, 357214R92, 362175R94 (Part No: 128190C91)
$528.47

Lights
Headlight Assembly - 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5 inches in diameter. Price is for one headlamp assembly. Does not include mounting bracket. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W4, Super W6, Super A, W4, W6, W9, WD6, WD9. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 45640DB-12V)
$41.06

Headlight Assembly, Flat Back - 6 Volt - For Farmall Cub, Cub Lo-Boy, C, Super C after serial number 159455, M, MV, MD, MDV, MTA, Super MD, Super MDV, also for Model 100, 130, 140, 200, 230, 240, 300, 350 Utility, 330, 340, 400, 450. Replaces OEM number 357884R94. Flat-Back (not teardrop). Primered red. Price is for one complete headlamp assembly. (Part No: 357884R91-6V)
$41.33

Headlight Assembly, Flat Back, 12 Volt - For Farmall Cub, Cub Lo-Boy, C, Super C After 159455, M, MV, MD, MDV, MTA, Super MD, Super MDV. Also for Model 100, 130, 140, 200, 230, 240, 300, 350 Utility, 330, 340, 400, 450. Replaces OEM# 357884R94. Flat-Back (not teardrop) Primered red. Price is for one complete headlamp assembly. (Part No: 357884R91-12V)
$41.51

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5 inches in diameter. Price is for one headlamp assembly. Does not include mounting bracket. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W4, Super W6, Super A, W4, W6, W9, WD6, WD9. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 45640DB)
$44.34

Headlight Gasket - Black rubber, like original with staple. For use in 4 ż inch diameter light assembly. Used with 53523D.For the following tractors: Cub up to serial number 165152, Super C up to serial number 159454, TD with bulb style light, (Super WDR9, WD9 up to serial number 1041), W6 up to serial number 3950, (Super H, Super HV up to serial number 19233), ( Super AV, Super A, W4 all early up to 1953), (Super M, Super MD up to serial number F28174 and Louisville built up to serial number L504508), A, B, C, H, M, I4, I6, I9, ID6, ID9, AV, BN, MDV, MTA, MV, TD6, W9, O4, WR9, O6, ODS6, OS4, OS6, Super MD, Super MTS, Super W4, WD6, WR9S. Replaces AA2329R, 53527D. (Part No: 53527D)
$3.53

Headlight Lens - Replacement Glass Lens is 4.75 inch outside diameter for IH (45640DB) Headlight Assemblies. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, W4, W6, W9, WD6, WD9. (Part No: GC200)
$13.35

Headlight Lens - For tractor models 100, 130, 140, 200, 230, 240, 300, 350, Farmall 300, 350 Utility, 330, 340, IH & Utility 240, 400, 450, Farmall Cub, Cub Lo-Boy, Farmall C, M, MV, MD, MDV, Super MD, Super MDV. (Part No: 357884R94)
$11.70

Headlight Lens Gasket - Gasket, 4 5/8 outside diameter for lens in sealed beam units 358890R92. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Part No: 358892R91)
$3.56

Headlight Reflector - 4 inch - This headlight reflector repairs OEM " Flatback" type headlights 45640DB and AA3075R. Does not come with bulb. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Part No: S.02377)
$8.64

Headlight Trim Ring - Moulding trim ring for 5 inch teardrop headlights or rear lights on tractors (painted). For tractor models 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 450, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super WD9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Part No: 53525DA)
$14.25

Headlight, Teardrop - 12 Volt. For tractor models 300, 340, 350, 400, 450. (Part No: R2717)
$53.87

Knob - Knob for combination rear light and tail light switch (used only with switch body with 15/32 inch shaft). For tractor models 100, 130, 200, 230, 300, 330, 340, 350, 400, 450, 600, 650, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W6, Super WD9, Super A, WR9S. (Part No: 359773R91)
$4.88

Light Clamp - Clamp, lamp assembly for tractors. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W6, Super A, W4, W6, W9, WD6, WD9. (Part No: 350920R1)
$9.00

Light Switch Knob - Old style for rotary light switches. For tractor models A, AV, B, BN, C, H, HV, M, MD, MV, MDV, W4, W6, W9, WD6, WD9, WR9, WDR9, O4, OS4, I4, I6, I9, ID6, ID9, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MV, Super MDV, Super MTA, Super W4, Super W6, Super W6TA, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, Cub. (Part No: 57313D)
$10.50

Light Switch, 12 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5362)
$47.06

Light Switch, 12 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5364)
$44.85

Light Switch, 12 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5366)
$47.06

Light Switch, 12 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5368)
$48.34

Light Switch, 6 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5361)
$48.34

Light Switch, 6 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5363)
$44.85

Light Switch, 6 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5367)
$48.34

Rear Combo Light - 6 Volt Rear Combo Light Assembly with Red Jewel Light with rotary switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. Replaces 355914R91. (Part No: 355911R91)
$67.88

Sealed Beam 6 Volt - Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. Bulb measures 4.375 inches outside diameter. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR9. Verify dimensions. (Part No: 358890R92-6V)
$36.75

Sealed Beam Assembly - This is a Flat Back Sealed Beam Light Assembly rated at 12 Volts for tractor models 300, 340, 350, 400, 450. (Part No: R2715)
$52.44

Sealed Beam Bulb 12 Volt - Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. This is a 12 volt sealed beam unit. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR6, WDR9 (Part No: 358890R92-12V)
$38.25

Sealed Beam Bulb, Red & White - 4.5 inch diameter, 12 volt. For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. (Part No: 371461R92)
$20.24

Switch, Worklight, with Knob - For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. Replaces 359682R91. (Part No: 375653R92)
$14.98

Oil System
Oil Filler Cap - This Oil Fill Cap does not come with hardware or gasket. We do not have those parts available. For tractor models 300, 350, 400, 450, H, HV, M, MD, MDV, MV, Super H, Super HV, Super M, Super MTA. (Part No: 4819DX)
$8.25

Oil Filter - Oil filter element, cartridge type with gasket. For gas engines: C113, C152, C248, C264, C281, Element is 3 7/16 inches in diameter and 7 1/2 inch overall length. Replaces: 355010R91, 360431R91, 376375R91, 63858D (Part No: 376375R91)
$11.94

Oil Filter - Oil filter element, cartridge type with gasket. For gas engines: C248, C335, C350, in tractors: M and MV to serial number 59393, I6 and W6 to serial number 4242, W9, 600, 650. For diesel engines D248, D264, D281, D335, D350, tractors: MD, Super MD, ODS6, WD6, Super WD6, For 400, 4252, 450, 6, 600, 650, M, MD, MV, ODS6, Super MD, Super WD6, Super WD9, W6, W9, WD6, WD9. Filter is 3 7/8 inches in diameter and 7 inches overall length. Replaces: 376376R91, 257867R92, 360432R91, 63884D, 63885D. (Part No: 376376R91)
$18.35

Oil Filter, Spin-On - For tractors that have been converted from cartridge type to spin on oil filters. (Part No: E7NN6714AA)
$7.29

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Washer available as part number EBU6734A, not included. Replaces: 688067C1, 359875R1. (Part No: C5NE6730B)
$3.00

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Part No: EBU6734A)
$1.25

Spin On Oil Filter Adapter Kit - This Spin On Oil Filter Adapter Kit Fits all Gas and LP, IH Combines: 105, 122, 140, 203, 62, 64, 76, 91, 93. Industrials: (I4, I6 Serial Number 4253 and up). Tractors: 300, 350, 400, 450, (A without hydraulics), B, BN, H, HV, (M, MV Serial Number 595394 and up), MTA, O4, (O6, W6 Serial Number 4253 and up), OS4, OS6, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, (T6, U6 Serial Number 5455 and up) ], (T6-61, U164, U4, UC248 Serial number 2327 and up), W4, W400, W450; For Replacement filter, order E7NN6714AA. Replaces: 538829R91 (Part No: 538829R91KIT)
$90.39

PTO / Driveline
Live Planetary PTO Front Bearing Retainer Seal - Thisálive planetary PTO front bearing retainer seal has a 1.5 inch Inside Diameter, a 2.38 inch Outside Diameter and is 0.315 inch wide. It Fits:áMTA, Super MDTA, Super MDV-TA, Super MTA, Super MVTA, Super W6TA, Super WD6TA, 300, 330, 340, 350, 400, 450, 460, 560, 660. Replaces: 103330R91, 289198, 338590R91, 357973R91, 357978R91 , 359056R91, 359449R91, 359789R91, 360437R91, 364470R91, 364474R91, 367162R91, 58685D, 70259D, 703281R91, 708095R91, 80093H, 93516R91, 953019R1, 953020R1 (Part No: AT344T)
$8.12

PTO Bearing - This bearing measures 1.575 inches (40.005 mm) inside diameter, 3.150 inches (80.010 mm) outside diameter, and 0.709 inches (18.008 mm) wide. It replaces D83012, B18215, DANA070HD100, H437897, H4628S, H4625S, H4626S, H4627S, K3660223431, L33908, SBA326040030, P39642, ST215, 0000140211, 0040040, 1103566C91, 114085, 130029H1, 151901206, 190001311024, 190003311024, 190003313025, 192310210025, 1963034C1, 199012290707, 20915780, 2359180, 2521A415, 294714R91, 301164, 3146251R91, 325046C91, 339818X1, 340401140, 41618500, 47109308, 47110555, 47123219, S69425, 6208, 700524R91, 700526R91, 70066742, 700803429, 704772R91, 704772R92, 707805203, 713564R91, 80114085, 80301164, 81878507, 83962320, 87605894, 920096050, 9964942 (Part No: ST215)
$11.27

PTO Brake Band with Lining - This brake band is 1.495 inches wide and the lining is 0.120 inches thick. It is used on the following tractors with planetary PTOs: Super M, Super MTA, 300, 330, 340, 350, 400, 450, 460, 560, 660. Replaces: 359059R91, 365763R91, 373304R91, 373304R92. Two are used per tractor, sold individually. (Part No: 359059R91)
$238.13

PTO Seal - Measures 1.306 inch inside diameter, 2.220 inch outside diameter. THIS SEAL IS .312 InchES WIDE. VERIFY THE WIDTH OF YOUR OLD SEAL. YOU NEED TO INSTALL 2 OF THESE IF YOUR OLD SEAL IS WIDER. For tractor models Super A, H after serial number 118000, (M, MD, Super M, Super MTA and Super MD after serial number 59957), Late W4, W6, W9, Super W4, Super W6, Super W9, B250, B275, B414; Also fits the following models with transmission driven PTO (not Live PTO): MTA, 300, 330, 350, 354, 364, 384, 400, 424, 434, 444, 450, 454, 544, 600, 650, 2300, 3414, 3514, 3616. Replaces 3065217R91, 358772R91, 358812R91, 50702D, 372394R91, S90957, 708107R91. (Part No: 45702D)
$10.16

PTO Seal - For tractor models with Live PTO: Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660, W400, W450. 1.375 inch inside diameter, 2.378 inch outside diameter, 0.312 inch wide Replaces 360436R91, 364472R91, 364477R91. (Part No: 359051R91)
$14.93

PTO Shaft - 17 spline, 25 teeth, 1 3/4 inch diameter. For Super MTA, 400, 450. Replaces 360468R1. (Part No: R2975)
$184.28

PTO Shaft Guard - PTO Shaft Guard attaches with a hose clamp that can be purchased locally. For A, B, Super A, Super AV, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 504, 544, 606 and with transmission driven type tractors: 330, 330, 350, 400, 450. PTO safety guard. (Part No: 51484DX)
$13.97

PTO Shield - For 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660 ALL with Independent PTO. PTO Shield (Part No: 360181R91)
$62.72

Seats
Pan Seat 4-Bolt Mount - Pan Seat with silver padded canvas. Center brass drain hole over metal pan seat frame. For: C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 3 50, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R0906)
$168.93

Pan Seat 4-Bolt Mount - Pan Seat with a red and white vinyl cover measures 22 inches wide and 19 inches long. For C, Super C, Super H, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: 357518R91)
$111.57

Pan Seat 4-Bolt Mount - Black vinyl padded cushion with steel pan seat. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R0903)
$172.40

Pan Seat 4-Bolt Mount - Silver canvas cushion with steel pan seat. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R1113)
$145.52

Pan Seat 4-Bolt Mount with Brass Drain Hole - Red and white vinyl with brass drain holes. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. Replaces 357518R91. (Part No: R0905)
$164.47

Seat Back - Seat back ONLY (seat bottom part number R1136 must be ordered separately). For 240, 300, 350, 400, 450 with Deluxe Seat, 460, 560, 660. (Part No: R1137)
$102.40

Seat Back - White and red with a wood base. For tractor models 240, 300, 504, 660, 2504 (standard), 400, 450, (560 and 460 both standard row crop). (Part No: 372757R92-17)
$57.13

Seat Bottom - Seat bottom ONLY with metal pan, (backrest part number R1137 must be ordered separately). Black vinyl on steel. For 240, 300, 350, 400, 450 with standard seat, 460, 560, 660. (Part No: R1136)
$137.16

Seat Hinge Pin - Pin, hinge for tilt back seat bracket. Pin is 7 inches long and 3/8 inch diameter. Tractors: C, Super C, H & HV, Super H & HV~ M & MD, Super M & MTA~ Super W6 & W6TA~ 200, 230, 300, 340, 350, 400, 450, 560, 660. For 200, 230, 300, 340, 350, 400, 450, 460, 560, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super HV, Super M, Super MD, Super W6, W6TA. OTHER PARTS IN PICTURE SHOWN FOR REFERENCE ONLY. Replaces: Washer: 228280, Pin: 356892R2, Clip: 356893R2 (Part No: 356892R2)
$12.25

Seat Locator Spring - This Seat Locator Spring fits: C, Super C, (Super H, Super HV serial number 19234 and up), (Super M, Super MD, Super MDV, Super MTA, Super MV serial number 28175 and up) Super MTA (Diesel serial number 28175 and up), 200, 230, 400, 450, 560, 600, 650, 660, Farmall Rowcrop: 300, 350, 460, Wheatland: 400, 450; Replaces: 352105R1. (Part No: 352105R1)
$6.15

Seat Pivot Support Rod - This Seat Pivot Support Rod is 3 1/2 inches in length. Includes machine washers, rubber bushings, bolts and lock washers. (Part No: 355753R1)
$22.56

Seat Shock, Mid Mount - For tractor models: C, Super C, Super H, and Super H. All serial number 19234 and up; M, MD, MDV, Super MDV, Super MD, 200, 230, 300, 350, 400, 450, 460, 560. Shock absorber for mid mounted shock is 7 1/4 inches from center-to-center compressed length. Replaces IHS347, 361033R91. (Part No: 351750R93)
$44.30

Seat Spring - Cone Shape SPRING Measures 13 inches tall and 8.5 inches at base. For tractor models 200, 230, 300, 350, 400, 450, 460, 560, 600, 650, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super M, Super MTA. Replaces IHS030. (Part No: 354670R2)
$31.43

Upper Bolster Shaft Horizontal Seal - Thisáupper bolster shaft horizontal seal has a 1.5 inch Inside Diameter, a 2.38 inch Outside Diameter and is 0.315 inch wide. It Fits: B-450, BM, BMD, M, MD, MDV, MTA, MTAV, MV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, 400, 450. Replaces: 103330R91, 289198, 338590R91, 357973R91, 357978R91 , 359056R91, 359449R91, 359789R91, 360437R91, 364470R91, 364474R91, 367162R91, 58685D, 70259D, 703281R91, 708095R91, 80093H, 93516R91, 953019R1, 953020R1 (Part No: AT344T)
$8.12

Sheet Metal / Body Parts
Battery Box - For models: (300, 400 Serviceable but the rear light on the opposite side) 350, 450. Battery Box with IH logo imprint, restoration quality. Less lid. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 362059R92)
$115.78

Fender - For Farmall H, Super H, M, Super M, Super MTA & 300, 350, 400, 450. This fender fits either left or right side. You must order two for a complete set. Additional $20.00 shipping due to weight. Mounting Plate and Spacer sold seperately. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 51500DB)
$143.93

Fender Extension Mounting Kit - One kit used per tractor. For tractor models H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDTA, O4, Super W4, W6, WD6, Super W6, Super W6TA, W9, WD9, Super WD9, 100, 130, 140, 400, 230, 240, 300, 330, 340, 350, 400, 450. Fender mounting Kit includes 2 fender flat brackets with (34 Pieces) all mounting hardware. Replaces IHS364. (Part No: 8000072)
$58.65

Fender Mounting Plate - For Farmall H, Super H, M, Super M, For Farmall H, Super H, M, Super M, Super MTA & 300, 350, 400, 450. This fender mounting plate fits either left or right side. You must order two for a complete set/1 tractor. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 51500PL)
$25.08

Fender Mounting Spacers - For Farmall H, Super H, M, Super M, For Farmall H, Super H, M, Super M, Super MTA & 300, 350, 400, 450. This fender mounting spacer fits either left or right side. Price is for each, Min order QTY is 4. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 51502D)
$15.42

Grill Screen - Original 3/16 inch wire mesh sheet. Each 24 inch x 36 inch, sheet is made of original thickness wire and includes clips. Cut sheet to appropriate grill screen size for your tractor. For Farmall models A thru 450. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R4476)
$37.65

Steering
Axle - Heavy duty main axle assembly includes bushings. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. Additonal $45 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 7453)
$622.64

Axle Center Tube - For all models listed with factory IH wide front with tie rods behind center tube: H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, 1026, 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 666, 706, 756, 806, 826, 856 Axle Center Tube with bushings (48841D) is 42 1/2 inches long and 4 1/2 inches in diameter. Replaces: 358976R31, 383926R21, Bushing: 48841D (Part No: 358976R31)
$281.00

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 11-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 7465)
$205.70

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 9-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 7470)
$203.70

Axle Pivot Pin Bushing - This Bushing Measures 1.245 inches inside diameter, 1.375 inches outside diameter, 1.486 inches long. Sold individually. This bushing has a superior dimpled brass inner design to retain grease. No need for an external grease hole. Note: Must be honed or reamed to size when installed. Used on the following as a WIDE FRONT axle pivot pin bushing for factory adjustable wide front axle and tie rods behind the axle: 1026, 1256, 400, 450, 660, 666, 300, 350, 460, 544, 560, 656, 706, 756, 806, 826, 856, H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, Super MDTA, Super MTA, W400, W450. Replaces 48841D (Part No: 48841D)
$11.18

Bolster Pivot Pin - 1 1/4 inch diameter, 8 1/2 inches long. If you need a 1 1/2 inch Diameter Pin, order 379941R1. For tractor models H, Hydro 70, M, MD, MTA, Super H, Super M, 1206, 1256, 400, 450, 460, 544, 560, 656, 666, 686, 706, 756, 806, 826, 856. Replaces 358978R1, 358978R2 (Part No: 358978R2)
$31.26

Bracket, Belt Driven Power Steering Pump - Bracket bolts to the left side of the engine above the governor. For tractor models M, MV, Super M, Super MV, MTA, 400, 450, W6, Super W6, W6TA, W400, W450. (Part No: 20969)
$72.45

Front Axle Assembly, Wide, Heavy Duty - For M, Super M, MTA, 400, 450. Includes 6 bolt hubs with 6 inch bolt circle and 4.62 inch pilot diameter hole, bearings and seals are also included. Heavy Duty Front Axle with hubs and mounting parts. Width on wide axles are adjustable from 60 inches to 86 inches. Additional $ 100.00 shipping due to the weight of this item, 320 pounds. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 23209)
$2743.73

Front Axle Assembly, Wide, without hubs - REPLACES: DU400 (model number) NOTE: Standard Duty models do not include hubs and bearings. Use original narrow front axle hubs and bearings. Standard Duty Models are not recommended for use with flotation tires. Fits these models: 400, 450, M, MTA, Super M. Width on wide axles are adjustable from 60 inches to 86 inches. Additional $ 100.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 21019)
$1433.42

Spindle, LH - Fits Tractor Models: 400, 450 with OEM WIDE FRONT, M LATE, MTA, Super M. (Part No: 360407R91)
$244.98

Spindle-RH - Fits Tractor Models 400, 450 with OEM WIDE FRONT, M LATE, MTA, Super M. (Part No: 360408R91)
$211.57

Stay Rod Assembly - Stay Rod Assembly "Wishbone" fits wide front end tractors. For tractor models 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 856, H, Hydro 70, M, Super H, Super M, Super MD. Replaces 10546D, 360405R11 VERIFY PART NUMBER IN PARTS MANUAL FOR YOUR TRACTOR. (Part No: 360405R11)
$412.62

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some models use more than one, sold individually. Some models used different sizes, verify measurements. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Part No: 70224890)
$11.87

Steering Universal Joint - For tractor models H, Super H, M, Super M, 300, 350, 400, 450. Steering Universal Joint complete joint with yokes, pins and grease fitting. Not for Keyed yokes. (Part No: USJ78)
$76.73

Steering Wheel - For Late 140, 240, Farmall 300 (not utility), 340, 350, 400, 404, 424, 444, 450, 460, 560, 4100, 4166, 4186. Steering Wheel 18 inch diameter, 7/8 inch 36 splined hub. Replaces OEM part number 366557R1, 366557R2, 366557R91. (Part No: R3217)
$41.88

Steering Wheel - For M, MD, W9, WD9, WR9, 400, 450, 600, 650. Steering Wheel 20 inches in diameter, 3/4 inch keyed hub, 4 spokes. (Part No: 557282R91)
$35.03

Steering Wheel - With 7/8 inch splined hub. For tractor models 140, 350, 404, 424 without power steering, 444 without power steering, 450, W450, 460, 504, 560, 2404, 2424 without power steering, 2444 without power steering, 4100, 4156, 4166, 4186, Combines: 105, 203, 205 to serial number 1289. Steering wheel 17 3/8 inch diameter, 7/8 inch hub, for splined shaft. Does not come with center cap. (Part No: 366557R2)
$50.00

Steering Wheel - 17-5/8 inch diameter, 3/4 inch hub, for keyed shaft. 3 Spoke. Super A serial number 356000 and up, C, Super C, H, Super H, M, Super M, MD, W4, Super W4, W6, Super W6, W9, 100, 130, 200, 230, 240 and 300, 350, 400, 450 without Power Steering. Metal Spokes. Replaces IHS328. (Part No: 60070D-OE)
$31.68

Steering Wheel Cap, Models with Power Steering - Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Part No: 366566R1)
$50.37

Steering Wheel Cap, Models without Power Steering - Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Part No: 366558R1)
$50.37

Steering Wheel Nut - This steering wheel nut fits the following tractor models: Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 70, A, AV, AV1, B, BN, C, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDVTA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 200, 230, 600, 650, Cub Lo-Boy, 300, 400, 450, and Cub. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 114499, 122403, and 219753. (Part No: 353435X1)
$0.48

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Part No: 35P51)
$6.15

Steering Worm Bearing Retainer - This Worm Bearing Retainer is 2.1875 inches in diameter and has 12 right hand threads. For models 2404, 2424, 2444, 2504, A, AV, B, BN, C, H, HV, M, MD, MDV, MV, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 404, 424, 444, 450, 504. (Part No: 6660DA)
$24.38

Steering Worm Gear, Sector - 32 teeth. For tractor models 400, 450, M, Super M, Super MTA. The style of this gear is full circle. This gear has 32 teeth. It can also replace a 19 tooth sector (1/2 inch moon style). Replaces: 50037DA, 50037DB, 704168R1. (Part No: 50037DB)
$144.83

Steering Worm Shaft Bearing - This Steering Worm Shaft Bearing has a 0.984 inch inside diameter, a 2.047 inch outside diameter and a 0.590 inch width. Fits B, BM, BN, C, H, HV, M, MD, MDV, MTA, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV-TA, Super MTA, Super MV, Super MVTA, 200, 230, 400, 450, Super MTA, (424, 444 used as a steering worm shaft bearing; without power steering), 240, 300, 340, 350, 404, 504, 240, 404. Replaces: 1271857C91, 1273146C91, 210041, 43357D, 69696D, 741-0360, 741-3037, 941-3037, ST225, ST225AT, ST225B, ST225BT, ST225Y, ST678. (Part No: ST225B)
$6.65

Steering Worm Shaft Oil Seal - This Steering Worm Shaft Oil Seal measures 1.000 inch inside diameter, 1.503 inch outside diameter, 0.250 inch wide. Fits B, BN, C, H, HV, M, MD, MDV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDV-TA, Super MV, Super MVTA, 200, 230, 240, 400, 450, MTA diesel, 300, 340, 350. Replaces: 359042R91, 359257R91, 364468R91, 43800D, 43800DA, 488561R91. (Part No: 43800D)
$10.34

Thrust Bearing - Fits Models: 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 1822, 1844, 2022, 2044, 21026, 2400A, 2500A, 2656, 2706, 2756, 2826, 2856, 300, 3088, 3288, 350, 3688, 380B, 385, 395, 400, 450, 454, 484, 485, 495, 504, 5088, 5288, 544, 5488, 560, 574, 584, 585, 595, 595XL, 656, 66, 666, 674 with STRAIGHT AXLE. (Part No: 185106C1)
$11.31

Thrust Bearing, Axle - Standard duty. Fits Schwartz/Speeco type front ends. For tractor models 300, 350, (354, 364 last serial number models), 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, (B414 last serial number models), H, M, MTA, Super H, Super M. Replaces OEM number 392671M91. Also replaces SCHWARTZ part number 60351. (Part No: T163)
$15.29

Tie Rod - Long notched With seal and stud nut for Swartz front end. 18 inches long from center of ball joint to end of shaft. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H. (Part No: 22513)
$62.04

Tie Rod Assembly - Using this tie rod assembly for the models listed will take modification, but it is the only one available for factory original row crop models: H, M, MD, MTA, Super H, Super M, Super MD, Sure MTA, 300, 350, 400, 450. This tie rod assembly tapered ball stud measures 0.675 inch to 0.762 inch at the widest point of the taper shaft, with 5/8-18 thread. The tie rod is adjustable to a maximum of 34-1/4 inches and a minimum of 20-7/8 inches. Fits factory INTERNATIONAL wide front axles only (with tierods behind the center axle.) Will NOT fit Swartz, Norden, Speeco, or other aftermarket wide front axles. To make this assembly work for these applications, the center tube must be shortened about an inch. We do not have instructions for doing this modification. This part can not be returned if you make modifications to the tube. Contains the following items: 359984R93 Tie Rod- Outer, 359986R1 Clamp, 374062R1 Jam Nut, 383917R1 Tube, 384006R92 Tie Rod- Inner. (Part No: 223313)
$81.42

Tie Rod Tube Kit - For a Swartz front end. Kit includes, 1 tie rod tube, 1 plug, 1 ball stud, 2 1/8 inch cotter pins, 1 dust seal. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 22812)
$57.09

Wheels
Bearing Cone - Outer cone for bearing kit FW112FS. For tractor models HV, Super HV, MV & MDV, O6, ODS6, W6, WD6, Super W6 & WD6, 400, 450. For 400, 450, HV, MDV, MV, O6, ODS6, Super HV, Super MDV, Super MV, Super W6, Super WD6, W6, WD6. (Part No: ST771A)
$69.39

Bearing Cone - Inner cone for bearing kit FW112FS. For tractors HV, Super HV, MV & MDV, O6, ODS6, W6, WD6, Super W6 & WD6, 400, 450. For 400, 450, HV, MDV, MV, O6, ODS6, Super HV, Super MDV, Super MV, Super W6, Super WD6, W6, WD6 (Part No: ST781A)
$38.45

Clamp Lock Nut - Wheel Clamp Lock Nut. 7/8-14 thread. Fits front wheel on tractors: H, Super H~ M, Super M~ B275, 300, 350, 400, 450, 460, 560. For 300, 350, 400, 450, 460, 560, B275, H, M, Super H, Super M (Part No: LN10-5)
$14.23

Front Wheel / Rim Clamp - Used on many Farmall / IH tractors, this clamp 1.485 inch over all length with a 0.540 inch hole. Three or more used per wheel. Sold individually. Replaces 48976DA (Part No: 48976DA)
$10.95

Front Wheel Bearing Kit - Kit contains one each: 342S (cone), 332 (cup), 2878 (cone), 2820 (cup), 48704DA (seal), 15288A (felt seal). Repairs one wheel. For 400, 450, HV, MDV, MV, O6, ODS6, Super HV, Super MDV, Super MV, Super W6, Super WD6, W6, WD6. (Part No: FW112FS)
$158.55

Oil Seal - Oil seal for bearing kit FW112FS. For tractor models HV, Super HV, MV & MDV, O6, ODS6, W6, WD6, Super W6 & WD6, 400, 450. 358779R91, 358818R91, 367161R91, 372475R91, 48704D, 48704DA, 704108R91, 708108R91 (Part No: 48704DA)
$31.19



Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$239.98

Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4 inch throat, 1/8 inch diameter rivet punch. (Part No: RIVET_TOOL)
$40.58

Cooling System
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: MBH1153)
$70.77

Radiator Drain Tap - This drain tap fits various tractor models as a radiator, engine block, and hydraulic drain tap. This is 1/4 inch NPT 18 thread. Please verify size and thread count before ordering. Replaces: 103647, 144569, 1960767C1, 217-92, 31-157, 31-159, 31419, 371602A1, 4029/09055, 534184R1, 539787R1, 614201R1, 9671406, 47050674, 86625234, H434809. (Part No: C9NN8115A)
$3.75

Zip Leak - Industrial Radiator Stop Leak - A professional strength stop leak for tractors, trucks and construction equipment. Designed for large, heavy duty cooling systems. 5 oz. Bottle. Instructions/Usage: For average antique tractors (120-160 CID engines) use 1/4 bottle for 15 minutes, if the leak fails to stop, add an additional table spoon. (Part No: Z14012)
$10.23

Decals and Emblems
Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Part No: S.67826)
$14.10

Decal, IH Block - "IH" logo, 11 inches. (Part No: R4682)
$22.79

Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Part No: R4681)
$8.15

Decal, IH Block - "IH" logo, 1 3/4 inch. (Part No: R4680)
$6.51

Decal, IH Block - "IH", 1 1/4 inch Logo . (Part No: R4679)
$4.89

Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Part No: R5171)
$27.83

Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Part No: R5172)
$25.52

Decal, IH Block - "IH" logo, 10 inches. (Part No: R5173)
$29.33

Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Part No: R5174)
$3.26

Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Part No: R5175)
$4.89

Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Part No: R5176)
$6.51

Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Part No: R5177)
$16.28

Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Part No: R5178)
$9.77

Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Part No: R5179)
$9.77

Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Part No: R5180)
$16.28

Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Part No: R5181)
$19.53

Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Part No: R5182)
$6.51

Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Part No: R5183)
$21.65

International Decal - 8-1/2 inch long, white with black outline. (Part No: R0679)
$9.77

International Decal - 23 inches long, black block letters. (Part No: R0680)
$16.28

International Decal - 23 inches long, white with black outline. (Part No: R0681)
$19.53

International Decal - 26 inches long, black block letters. (Part No: R0682)
$19.53

International Decal - 26 inches long, white with black outline. (Part No: R0683)
$21.65

International Decal - 29 inches long, black block letters. (Part No: R0684)
$21.65

International Decal - 29 inches long, white with black outline. (Part No: R0685)
$24.74

Drive Train
Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$10.05

Electrical System
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. NOTE

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. (Part No: 2348258)
$33.75

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: ADR9209)
$13.67

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 8NL10302)
$12.29

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)
$86.46

Battery Hold Down Bolts - Pair - These "J" bolts measure 10 1/2 inches long and are universal for many batteries. Verify length. Price is for a pair. (Part No: 393161R1)
$10.47

Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)
$35.98

Battery Thermal Wrap - 80 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW36)
$37.48

Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)
$53.81

Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$31.83

Coil Bracket - Universal Coil Bracket (Part No: R1940)
$3.57

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Part No: X30042)
$44.75

Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25

Spark Plug - Extended tip, 14mm thread, 3/4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$3.12

Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$3.12

Spark Plug - Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Part No: AL3076)
$4.83

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: AL425)
$2.85

Spark Plug Wire Set, 4 Cylinder, Univeral - Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length (Part No: S2097)
$13.40

Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$15.00

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! NOTE

Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Part No: DR1467)
$16.23

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.55

Stripper and Crimping Tool - Professional Fast and Easy tool for stripping and crimping electrical wires. (Part No: B1SB6718)
$24.30

Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.45

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Part No: 182548M92)
$17.39

Engine Gaskets
Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR)
$5.70

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Part No: PRM77BR)
$7.97

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicone. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75┬░ F to +700┬░ F, 3 oz. tube. (Part No: PRM101BR)
$10.47

Engine Parts
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Rings
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System
Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89020C)
$78.88

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89025C)
$92.67

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.75 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89027C)
$99.58

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89051C)
$117.23

Chrome Exhaust Stack - This Chrome Stack is single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Part No: 146520CHR)
$112.10

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89054C)
$115.52

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.75 inch inside diameter inlet. It is 4 inches outside diameter beyond the inlet. This is a good Chrome Stack For IH Applications With 400 Series Diesel Engines & 3 3/4" OD Manifold Outlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89375C)
$152.21

Chrome Exhaust Stack - This Chrome Stack is single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Part No: 146490CHR)
$131.51

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89057C)
$129.84

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89485C)
$159.35

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: L102236CHR)
$85.96

Muffler Clamp, 1-1/2 - New Clamp for 1-1/2 inch outside diameter muffler inlet. (Part No: MC112)
$2.19

Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Part No: MC114)
$3.98

Muffler Clamp, 1-1/8 - New Clamp for 1-1/8 inch outside diameter muffler inlet. (Part No: MC118)
$4.17

Muffler Clamp, 1-1/8 - New Clamp for 1-1/8 inch outside diameter muffler inlet. (Part No: MC118)
$4.17

Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Part No: MC134)
$2.93

Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Part No: MC138)
$2.50

Muffler Clamp, 1-5/8 - New Clamp for 1-5/8 inch outside diameter muffler inlet. (Part No: MC158)
$2.99

Muffler Clamp, 1-7/8 - New Clamp for 1-7/8 inch outside diameter muffler inlet. (Part No: MC178)
$1.94

Muffler Clamp, 2-1/2 - New Clamp for 2-1/2 inch outside diameter muffler inlet. (Part No: MC212)
$3.30

Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Part No: MC214)
$3.14

Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Part No: MC234)
$4.50

Muffler Clamp, 2-3/8 - New Clamp for 2-3/8 inch outside diameter muffler inlet. (Part No: MC238)
$2.84

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Part No: MC300)
$4.50

Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Part No: MC312)
$4.75

Muffler Clamp, 3-1/4 - New Clamp for 3-1/4 inch outside diameter muffler inlet. (Part No: MC314)
$6.50

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Part No: MC400)
$7.50

Muffler Clamp, 4-1/2 - New Clamp for 4-1/2 inch outside diameter muffler inlet. (Part No: MC412)
$7.98

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Part No: MC500)
$7.98

Rain Cap - This rain cap is for a 1.50 inch pipe. (Part No: R1798)
$5.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$5.84

Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$7.25

Rain Cap - This rain cap is for a 2.25 inch pipe. (Part No: R1801)
$8.25

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$7.10

Rain Cap - This rain cap is for a 2.750 inch pipe. (Part No: R1804)
$10.02

Rain Cap - This rain cap is for a 3.0 inch pipe. (Part No: R1805)
$9.39

Rain Cap - This rain cap is for a 3.50 inch pipe. (Part No: R1806)
$8.57

Rain Cap - This rain cap is for a 4.0 inch pipe. (Part No: R1807)
$9.80

Stainless Steel Clamp, 2 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90869A)
$5.42

Stainless Steel Clamp, 2.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90871A)
$5.54

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90872A)
$5.94

Stainless Steel Clamp, 3 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90873A)
$5.57

Stainless Steel Clamp, 3.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90874A)
$5.81

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90875A)
$6.42

Fuel System / Air Intake
Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Part No: S.43231)
$10.29

Choke Cable - Universal choke cable 72 inch long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

Fuel Filter, In-Line, 1/4 inch - Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Part No: 6511393)
$4.86

Fuel Filter, In-Line, 3/8 inch - Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Part No: BF836)
$4.79

Fuel Filter, In-Line, 5/16 inch - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. (Part No: BF840)
$4.14

Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Part No: BF7736)
$2.45

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$37.65

Fuel Tank Liner Kit - Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$56.83

Fuel Tank Repair Kit - Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4 inches long and holes up to 3/8 inches in diameter. NOT for plastic fuel tanks. (Part No: FTR180)
$21.14

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Part No: R7949)
$9.00

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$11.91

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Part No: 47404DASSY)
$22.50

Marvel-Schebler Service Manual - This Service manual is a complete manual for all DLTX and TSX model carburetors. Comes with tractor carburetor principle of operation and overhaul step-by-step instructions. 21 Pages. (Part No: MAR_CARB_SV)
$9.95

Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: C1778R)
$1.20

Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Part No: PTSTOP)
$7.98

Gaskets
Gasket Material, Cork Rubber - 3/32 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR332)
$15.75

Gasket Material, Cork Rubber - 1/16 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR116)
$8.93

Gasket Material, Exhaust Manifold - 1/16 inch thick x 12 inches wide x 28-1/2 inches long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228)
$20.78

Gasket Paper, .0160 - .0160 inch x 18 inches x 98 inches long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844)
$17.63

Gasket Paper, .0275 - .0275 inch thick x 18 inches wide x 98 inches long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898)
$32.63

Temperature Gauge, Universal - Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Numeric Face. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch metal wrapped capillary line. (Part No: UTG25)
$22.02

Gauges
Ammeter Gauge - 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)
$3.08

Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Part No: IHS1837)
$29.95

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)
$46.42

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Part No: 41934DB)
$43.53

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch-24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)
$25.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)
$13.95

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Part No: IHS626)
$12.95

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.88

Temperature Gauge - Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$23.03

Temperature Gauge, Universal - For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$16.68

Hitch / Drawbar
Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH1447)
$230.60

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH1448)
$230.60

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH14416)
$249.75

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The "Bent Type" spaces out at 32 inches between the ends of the tongs. The "Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH14417)
$249.75

HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four(4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four(4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three(3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Part No: HPA15X)
$7.04

HITCH BALL 10000LB 2-5/16 - 2-5/16 inch BALL SIZE, 1-1/4 inch STUD THREAD, 2-1/2 inch STUD LENGTH, 10, 000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114)
$23.85

HITCH BALL 15000LB 2-5/16 - 2-5/16 inch BALL SIZE, 1-3/8 inch STUD THREAD, 2-5/8 inch STUD LENGTH, 15, 000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_)
$25.04

HITCH BALL 2000LB - 1-7/8 BALL SIZE, 3/4 STUD THREAD, 1-3/4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834)
$13.37

HITCH BALL 3500LB - Hitch ball. 2 inch ball size, 3/4 inch stud thread, 1-7/8 inch stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.74

HITCH BALL 5000LB - Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1/8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5/16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

Hair Pin Cotter Assortment - Hair Clips sizes from 1/16 x 1 3/8 to 3/16 x 3 1/4. Total of 141 pieces in 6 sizes. (Part No: B1SB16)
$29.19

LINCH PIN, 10 Pack - Package of 10 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516)
$3.30

Lift Arm Bushing - This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Part No: BUSH04)
$0.92

Linch Pins, Pack of 10 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$2.55

Linch Pins, Pack of 10 - 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Enter 1 for package of 10. (Part No: DKLP91)
$2.55

Linch Pins, Pack of 10 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. ***Enter 1 for package of 10*** (Part No: DKP316)
$1.95

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. Additional $60 shipping due to the weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$247.02

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Part No: 49A29)
$24.02

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$21.81

Universal Stabilizer Chain Kit - Chain stabilizers, turnbuckle and chain links adapt to any size 3-point hitch, usually used on larger tractors. VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed and sold in pairs, less brackets. (Part No: SK102CH)
$49.47

Hydraulic System
Universal Pressure Gauge, Hydraulic - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Part No: GG400)
$10.62

Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

Axle Nuts (5) - 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.69

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$1.94

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22)
$6.30

Bush Hog Axle Spacer Bushing - Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: SPB40)
$4.91

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$176.32

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: BH215)
$106.08

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)
$19.95

HUB with BRG CUPS - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: BH1311)
$24.90

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$28.38

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)
$44.70

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)
$44.70

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)
$77.06

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166)
$97.46

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)
$100.37

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163)
$109.42

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.56

Tail Wheel Assembly - 6 inch x 9 inch tail wheel assembly with laminated tire, less hub. 4 inch pilot, 5 bolt holes, 5-1/2 inch bolt circle. 5-1/4 inches wide, 21 inch outside diameter, 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)
$21.75

Lights
Halogen Work Light-Double Bulb - 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)
$51.42

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 45640DB)
$44.85

Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 45640DB-12V)
$41.06

Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Part No: 373661R91)
$12.47

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2 inch x 6 inch weather resistant steel body (black), glass lens, flood pattern, 140 foot beam. Halogen bulb, 12 volt, 55 watt, replaceable. 12 foot cord with cigarette lighter plug. (Part No: L100MAG)
$43.12

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)
$75.13

Sealed Beam Light - 6 Volt (Part No: R2712)
$40.95

Sealed Beam Light - 12 Volt (Part No: R2713)
$40.95

Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R)
$14.67

Work Lamp, HID, Flood Light - Universal high intensity discharge flood light, 35 watt Xenon H3 lamp, size 4.725 inch width X 4.330 inch height X 5.512 inch length, internal ballast, hardened glass lens, far longer life span than halogen. 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$127.64

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40