FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 2806 Tractor Parts

[Categories] [All Farmall Models] [Print]

Accessories / Supplies

Engine Block Heater - Frost plug heater with cord. 600 watt, 120 volt. Locks securely into engine block. 1-5/8 inch diameter with o-ring seal. Replaces 407046R92. Cord is 12 inches long. Fits gas engines: C153, C221, C263, C301 and diesel: D188, D166, D236, D282, D361, D236, D282, D. For 2504, 2806, 315, 340, 403, 453, 460, 503, 504, 560, 606, 615, 656, 660, 706, 715, 806. (Item #: 120027, Ref: 106725A1) $41.90

Brakes

Bonded Lined Brake Disc - 8 inch x 5 inch, 12 spline. For tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 2706, 2756, 2806, 2826, 2856. Replaces 384166R92. (Item #: 105451, Ref: 1975468C2) $19.30

No
Picture
Brake Arm Replacement Pad and Screw - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number M300, Can only be used on OEM 1981317C1 brake arms that have a replaceable pad., (Item #: 176618) $18.30

Brake Disc, Used - For International tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 384166R92, 1975468C2, Splines: 12 Internal, Outer Diameter: 8.000", Inner Diameter: 5.000", For a new version of this item use Item #: 105451, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405451) $10.01

Brake Housing, Used - For International tractor models 706, 756, 806, 856, 1206, 1256, 2706, 2756, 2806, 2856, 21206, 21256, Replaces International OEM nos 392780R11, Replaces Casting nos 392780R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434463) $98.01

No
Picture
Brake Kit - For International / Farmall tractor models 706, 756 (Farmall s/n 16737-earlier, IH s/n 8413-earler), 806, 856 (Farmall s/n 2479-later, IH s/n 9431-later), 1206, 1256 (Farmall s/n 14271-later, IH s/n 8699-later), 2706, 2756, 2806, 2856 (Farmall s/n 2479-later, IH s/n 9431-later), 21206, 21256 (Farmall s/n 14271-later, IH s/n 8699-later), Replaces International OEM number 1975468C2, 384166, 384166R91, Kit includes: (2) brake discs, (1) o-ring/seal kit, and (4) return springs, ID: 2-1/4", OD: 8.00", Spline Count: 12, Thickness: .436", (Item #: 176728) $176.00

Brake Operating Lever, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1066, 1086, 1206, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM nos 384306R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447297) $40.01

No
Picture
Brake Operating Rod with Clevis, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, 21206, 21256, 21456, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 384307R1, For a new version of this item use Item #: 172774, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447304) $50.01

Brake Piston Return Spring - For International / Farmall tractor models 706, 756 (Farmall s/n 16736-earlier, International s/n 8412-ealier), 806, 856 (Farmall s/n 24790-earlier, International s/n 9430-earlier), 1206, 1256 (Farmall s/n 14270-earlier, International s/n 8698-ealier), 2706, 2756 (Farmall s/n 16736-ealier, International s/n 8414--earlier), 2806, 2856 (Farmall s/n 24790-ealier, International s/n 9430-earlier), Compatible with International Construction and industrial models 21206, 21256 (Farmall s/n 14270-ealier, International s.n 869-ealier), Replaces Case IH OEM number 384367R2, (Item #: 129290) $7.40

Brake Plate - 8.050 inch outside diameter, 3.370 inch inside diameter, .645 inch thick. For tractor models (706, 2706 Farmall serial number up to 29000, IH serial number up to 4600), (806, 2806 Farmall serial number up to 23000, IH serial number up to 5700). (Item #: 105460, Ref: 384165R1) $103.00

Brake Plate, Intermediate - For tractor models 100, 1026, 1066, 1206, 1256, 21206, 21256, 2706 farmall serial number 29001>, international serial number 4601>, 2756, 2806 farmall serial number 23001>, international serial number 5701>, 2826, 2856, 706 farmall serial number 29001>, international serial number 4601>, 756, 766, 806 farmall serial number 23001>, international serial number 5701>, 826, 856, 926. (Item #: 105426, Ref: 392777R2) $45.40

Brake Valve Assembly, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 856, 886, 966, 1206, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 4386, 4586, 4786, 21206, 21256, Replaces International OEM nos 384186R3, 72807C93, 384186R2, 384186R1, 384186R93, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429973) $204.01

Intermediate Brake Plate, Used - For International tractor models Hydro 100, 706 (Farmall s/n 29001-later and International s/n 4601-later), 756, 766, 806 (Farmall s/n 230001-later and International s/n 5701-later), 826, 856, 966, 1026, 1066, 1206, 1256, 2706, 2806, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 392777R2, For a new version of this item use Item #: 105426, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405426) $20.26

Park Lock Handle, Used - For International tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM nos 386132R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434749) $20.01

Park Lock Lever Bracket, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3588, 3688, 3788, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 384055R11, 384055R12, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434899) $140.01

Park Pawl - For tractor models 100, 1026, 1066, 1086, 1206, 1256, 1456, 466, 1468, 1486, 1566, 1568, 1586, 186 Hydro, 21026, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488 Hydro, 3588, 3688, 3788, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 966, 986. (Item #: 113420, Ref: 139141C1) $200.00

Primary Brake Plate Assembly, Used - For International tractor models 706 (IH s/n 4601-later, Farmall s/n 29001-later), 756 (IH s/n 8412-earlier, Farmall s/n 16736-earlier), 806 (IH s/n 5701-later, Farmall s/n 23001-later), 856 (IH s/n 9430-earlier, Farmall s/n 24790-earlier), 1206, 1256 (IH s/n 8698-earlier, Farmall s/n 14270-earlier), 2706 (IH s/n 4601-later, Farmall s/n 29001-later), 2756 (IH s/n 8412-earlier, Farmall s/n 16736-earlier), 2806 (IH s/n 5701-later, Farmall s/n 23001-later), 2856 (IH s/n 9430-earlier, Farmall s/n 24790-earlier), 21026, 21256 (IH s/n 8698-earlier, Farmall s/n 14270-earlier), Replaces International OEM nos 392776R21, Replaces Casting nos 392776R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434900) $291.01

Transmission Brake Lever Assembly, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, 21206, 21256, 21456, Replaces International OEM number 1981317C1, 384311N, 384311R11, 384311R21, M299, For a new version of this item use Item #: 111367, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411367) $29.01

Clutch

Clutch Alignment Tool - 1-13/16 inch, 11 spline, 1-3/4 inch, 17 spline, .787 inch pilot. For tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1466, 1468, 3088, 3288, 3688, 2706, 2756, 2806, 2856. (Item #: 122054, Ref: S.70928) $22.00

Clutch Bearing and Seal Kit - Kit includes greasable release bearing N1174, pilot bearing 63042RS, inner 12363 and outer 19760 PTO seals, and o-ring 12250. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 3788, 4100, 4156, 4166, 4186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986. (Item #: 114543, Ref: N159763) $56.00

Clutch Bearing Carrier - Replaces 380109. For tractor models Hydro 100, 1026, 1066, 1086, 1206, 1256, 1456, 466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 966, 986 (Item #: 108765, Ref: 380109R1) $98.00

Clutch Bearing Seal Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 21206, 21256, 21456, For Use With OEM Carrier, Contents: 1-832503 Release Bearing, 1-836304 Pilot Bearing, 1-535208 Inner IPTO Seal, 1-535209 Outer IPTO Seal, 1-22414 IPTO Bearing Cage O-Ring, (Item #: 108785) $60.00

Clutch Disc - 12 inch, 4 button, spring loaded, 1.1875 inch spline diameter, 11 spline. For tractor models 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 400, 450, 500, 560, 600, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Super MTA. (Item #: 112266, Ref: 384395R94) $163.00

Clutch Disc - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688 (All Diesel), Replaces International OEM number 384395HD6, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Large Pads, (Item #: 112265) $131.00

Clutch Disc, Remanufactured, 384395R94 - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 2706, 2756, 2806, 2826, 2856, 3088, 3288, Replaces International OEM number 384395R94, 384395R94R, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 204187) $117.00

Clutch Disc, Remanufactured, 384395R94 - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, Replaces International OEM number 384395R94, 384395R94R, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Lg Pads, (Item #: 204189) $167.50

Clutch Kit - This new dual 12 inch clutch kit contains: 12 inch, 17 spline, 1.75 inch hub pressure plate assembly (405300R92); 12 inch, 11 spline, 1 3/16 inch hub, cerametallic clutch disc (384395R94); pilot (524598R91) and release (365867R91) bearings, and clutch alignment tool. For tractor models: 2706, 2756, 2806, 2826, 2856, 3088, 3288, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966. (Item #: 140640, Ref: 384395R94-KIT) $420.00

No
Picture
Clutch Kit, Remanufactured, 384395R94, 405300R92 - For International / Farmall tractor models 706, 756, 766 (dsl), 786, 806, 826, 856, 886, 966, 2706, 2756, 2806, 2826, 2856, 3088, 3288, Replaces International OEM number 384395R94, 405300R92, Clutch Diameter - 12", Clutch Hub Diameter - 1-3/16", Clutch Splines - 11, Clutch Center - Spring, Clutch Type - 6 Large Pads, Pressure Plate Size - 12", Pressure Plate Levers - 3, Pressure Plate Springs - 12, Pressure Plate Hub Diameter - 1-3/4", Pressure Plate Splines - 17, Pressure Plate Type - Single Stage, Flywheel Step 1.406", For a New version of this sku use Item #: 204189, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202014) $494.40

No
Picture
Clutch Release Bearing - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Compatible with Massey Ferguson tractor models 285, 1080, 1085, 1135, 1155, 1500, 1505, 1800, 1805, Replaces Massey Ferguson OEM number 834602M1, Inside Diameter: 2.500", Outside Diameter: 4.128", Width: 0.864", (Item #: 176789) $55.00

Clutch Release Fork - For tractor models 100, 1026, 1066, 1086, 1206, 1256, 1456, 466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 966, 986. (Item #: 111850, Ref: 380110R1) $76.00

Clutch Release Fork, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM number 380110R1, For a new version of this item use Item #: 111850, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411850) $25.01

Clutch Release Shaft - For tractor models 100, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 706, 756, 766, 806, 826, 856, 966. (Item #: 113405, Ref: 380180R12) $83.00

Clutch Release Shaft Kit - For International / Farmall tractor models 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 380109R1, 380110R1, 380180R12, (Item #: 113406) $245.00

No
Picture
Pressure Plate Assembly - For International / Farmall tractor models 766, 786, 806, 826, 856, 886, 966, 2806, 2826, 2856, 3088, 3288 (All Diesel), Replaces International OEM number 405300R91, 405300R92, 84342558, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub Diameter: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112264) $177.00

Pressure Plate Assembly - For International / Farmall tractor models 660, 706, 756, 766, 2706, 2756, 2806, 2826, 2856, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub Diameter: 1-3/4", Pressure Plate Splines: 17, Pressure Plate Type: Single Stage, For a Remanufactured version of this sku use Item #: 206075, (Item #: 122041) $264.00

Pressure Plate Assembly, Remanufactured, 405300R92 - For International / Farmall tractor models 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 2706, 2756, 2806, 2826, 2856, 3088, 3288, Replaces International OEM number 405300R92, 405300R92R, Type: Single Stage, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Additional Handling and Oversize Fees Apply To This Item, (Item #: 204193) $126.00

Pressure Plate, Remanufactured - For International / Farmall tractor models 660, 706, 756, 766, 2706, 2756, 2806, 2826, 2856, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 122041, (Item #: 206075) $145.01

Pressure Plate, Remanufactured - For International / Farmall tractor models 660, 706, 756, 766, 806, 826, 856, 886, 966, 2706, 2756, 2806, 2826, 2856, 3088, 3288, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, (Item #: 206076) $151.01

PTO Gasket and Clutch Disc Kit - Same kit as 77721, PTO Gasket and Clutch Disc Kit but also includes discs. For tractor models 100, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 21026, 21256, 21456, 2706, 2756, 2806, 2856, 3388, 3788, 706, 756, 766, 806, 826, 856, 886, 966, 986, all with independent PTO. Contains 9 plates (381489R3), 7 discs (381490R1), gaskets, o-rings (about 50 pieces). (Item #: 117126, Ref: PCK721) $180.00

Release Bearing - Clutch Release Bearing, inside diameter 2.49 inches, outside diameter 4.06 inches, width .820 inches, sealed roller. For mechanical release systems. For tractors: 400, W400, 450, W450, 560, 660, 756 766, 786, 886, 966, 986, 1066, 1086, 1206, 1256, 1456D, 1466, 1468, 1486, 1566, 1586, 21206, 21256, 21456, 2756, 3288, 3388, 3588, 3688, 3788 For 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966. Replaces original part numbers 361407R91, 362026R91, 362027R91, 365867R91, 365868R91, 367153R91, 58612D, 69789C1 and 69789C91. (Item #: 112189, Ref: N1585) $23.20

Release Bearing - Greasable. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3688, 3788, 400, 4100, 4156, 4166, 4186, 4366, 4386, 450, 4568, 560, 6388, 6588, 660, 6788, 706, 756, 786, 806, 826, 856, 886, 966, 986, Hydro 100, W400, W450. It has an inside diameter of 2.50 inches, an outside diameter of 4.125 inches, and is .83 inches wide. Please verify measurements before ordering. (Item #: 107274, Ref: 365867R91) $25.00

Cooling System

Belt - This Fan Belt measures 1/2 inch wide and 48 5/8 inches long. For Diesel models 2706, 2806, 656, 660, 706, 806. Verify measurements before ordering. (Item #: 123127, Ref: 378113R2) $7.20

No
Picture
Bypass Hose - For International / Farmall tractor models 806 (Farmall), 806, 1206 (Diesel, 1/66-12/68), 2806 (Diesel), 21206 (Diesel, 1/66-12/68), Compatible with International Engine (s) D361 (6 cyl, Diesel), DT361 (6 cyl, Turbo Diesel), D407 (6 cyl, Diesel), DT407 (6 cyl, Turbo Diesel) Replaces International OEM number 407006R1, , Compatible with Massey Ferguson tractor models 154-4, 154-4 (S), 184-4, 254-4, 274-4, 294-4, Replaces Massey Ferguson OEM number 1824633M1, Inside Diameter: 1-3/4", Outside Diameter: 2-1/8", Length: 3-1/4", (Item #: 168907) $7.60

Cooling Fan - 6 Blade, Used - For International tractor models 806, 2806, Compatible with International Engine(s) D361, DT361, D407, DT407, Replaces International OEM number 383668R91, A173728, Fits Farmall tractor models 806, Blades: 6, Outside Diameter: 19 7/8", For a new version of this item use Item #: 163835, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431148) $71.01

Fan, 6 Blade - 19.870 inch diameter, 2.195 inch pilot hole, 3.50 inch center to center on bolt holes. For tractor models (2806, 2856, 806, 856 all diesel). (Item #: 163835, Ref: A173728) $181.00

Fan and Generator Belt - Fits engines C221, C263, C301 on tractors: 2606, 2806, 460, 560, 606, 650, 660, 806. This is also an alternator belt for D282 diesel engine in: 560, 660. Generator and water pump belt in: 706, 2706. Belt is 1/2 inches wide and 46 inches in length. (Item #: 172612, Ref: 403348R1) $16.00

Fan Shroud, Used - For International tractor models 806, 856, 2806, 2856, Replaces International OEM nos 396594R1, Diesel Engines, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431149) $89.01

Radiator - Core size ("A")= 23-1/4 inches tall, ("B")= 19-1/8 inches wide. Fits 806 Gas and Diesel, 826 Gas, 856 Gas and Diesel, 1026, 1206, 1256 HYDRO, 1456, 2806 Gas, 2856 Gas and Diesel. Replaces 391931R91, 386860R91, 530281R1. (Item #: 101726, Ref: 386860R91) $440.00

Radiator - Replaces OEM# 386860R91. For tractor models 806, 826, 856 GAS and DIESEL, 1026, 1206, 1256 HYDRO, 1456, 2806, 2856 GAS and DIESEL. Core Height 23", Core Width 18-3/4", Depth 3 1/4". 30" Overall Height, 21-3/8 Width. Replaces 391931R91, 386860R91, 530281R1. (Item #: 101726, Ref: R2172) $440.00

Radiator, Mounting Bracket Plate - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21256, 21456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. (Item #: 109941, Ref: 378710R91) $21.00

Thermostat - For tractor models 806, 1206, 2806, 21206 (All Diesel). (Item #: 155329, Ref: 619736C2) $54.00

Thermostat - Thermostat. For tractor models Gas 460, 560, 656, 660, 806, 706, 2606, 2706, 2806. Does not come with gasket. We do not have a gasket available. (Item #: 109692, Ref: 108120R92) $11.50

Tower Hose Clamp 2.685" to 2.995" - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, H, Super A, Super C, Super H, 100, 130, 140, 200, 230, 240, 300, 330, 350, 400, 450, 656, 706, 756, 806, 826, 856, 2706, 2756, 2806, 2826, 2856, Compatible with International Harvester (s) 55, 350, 550, 650, Replaces International OEM number 39205H, 706081R91, (Item #: 130443) $7.80

Water Pump - Water pump with hub installed on 1 inch outside diameter shaft. The perfect replacement for O.E.M. pump with smaller 7/8 inch outside diameter shaft. For diesel engines: D and DT361, D and DT407, in tractors: 806, 1206, 2806, 21206, 856, 1026, 1256, 1456, 2856, 21026, 21256, 21456, 815 For 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2806, 2856, 806, 815, 856, 915. Replaces 701335C92, 701335C91. (Item #: 100794, Ref: 701335C92) $103.00

Water Pump - With Hub For 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2565, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 70, Hydro 86 Tractors, 151, 151 Hillside, 181, 205, 303, 315, 403, 453 Hillside, 615, 715 Combines with C221, C263, C291, or C301 Gas Engines or D166, D188, D236, or D282 Diesel Engine. Replaces: 303395R91, 303396R91, 308383R91, 318118R21, 318119R91, 318119R92, 323877R11, 368496R91, 395813R91, 601816C92, 701128C94 (Item #: 107892, Ref: 601816C92) $90.00

No
Picture
Water Pump Gasket - Plate to Block - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, T340, TD6, TD9, 3514, 3600, 3616, 3800, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 69676R1, For Reman Water Pump use Item #: 107892, (Item #: 156625) $5.30

Water Pump Hub - Used with water pumps 601816C92, 375742R92, 375793R92. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 330, 340, 404, 460, 504, 560, 606, 660, 706, 806. (Item #: 121936, Ref: 368501R2) $33.90

Water Pump, Remanufactured, 601816C92 - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models 3514, 3616, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 601816C92, 749170C91, Replaces Casting number 169204R1, 303394R2, 318118R2, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, For a New version of this sku use Item #: 156625, (Item #: 204199) $100.01

Decals and Emblems

Front Emblem - Plastic "IH", red, black and white, 3-3/4 inch x 2-3/4 inch. For tractor models Cub Lo-Boy, 154, 184, 185, 140, 276, 404, 424, 434, 444, 504, 544, 553, 606, 654, 656, 666, 686, 706, 724, 756, 766, 786, 806, 824, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1586, 2400, 2404, 2424, 2444, 2500, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 21206, 21256, Hydro 70, Hydro 86. (Item #: 108481, Ref: 2751846R1) $18.30

Front Emblem - Plastic "IH", red, black and white 3-7/8 inch x 3-1/2 inch. For tractor models 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2756, 2806, 2826, 2856, 21026, 21256, 21456. (Item #: 107902, Ref: 2751847R1) $19.10

International, Seat Adjustment Decal, Silver and Black, Vinyl - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 21026, 21206, 21256, 21456, Replaces International OEM number 2751019R1, Vinyl Decal, silver and black, (Item #: 124216) $5.30

Drive Train

Ball Bearing - Constant Mesh and Torque Amplifier Drive Gear - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number ST3025, ST697, ST3024, ST3011, 80420C91, 80419C91, 15 Balls and Retainer, Inside Diameter: 75 mm, Outside Diameter: 130 mm, Width: 22 mm, This bearing is splash lubricated, Make sure sump has an adequate level of oil, (Item #: 168435) $29.90

Counter Shaft Bearing Cage, Rear, Used - For International tractor models 706, 756 (s/n 19635-earlier), 806, 856, 1206, 1256, 2706, 2756, 2806, 2856, 21206, 21256, Replaces International OEM nos 380274R11, Rear Bearing Cage, Inside Diameter: 2.133", Outside Diameter: 3.995", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436647) $101.01

Drive Gear Bearing Cage, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 21206, 21256, 21456, Replaces International OEM nos 380253R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432268) $93.01

Drive Gear, Reverse - For tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2806, 3088, 3288, 3488, 3688, 2706, 2756, 2826, 2856, 21026, 21206, 21256, 21456. (Item #: 122677, Ref: 393525R2) $334.00

Gear, 3rd and 4th Sliding - 31 teeth. For tractor models 1206, 1256, 21206, 21256, 2706, (Farmall 2756, 756 serial number up to 17635, IH serial number up to 8424), 2806, (Farmall 2856, 856 serial number up to 27286, IH serial number up to 9492), 706, 806. (Item #: 172447, Ref: 380125R2) $423.00

Gear, Pump Drive - 61 teeth. For tractor models 1026, (1066 gear drive), Hydro 1066, (1086 serial number up to 47999 and 55000 and up), 1206, 1256, 1456, (1466, 1468 gear drive), (1486 serial number up to 25999 and 29150 and up), 21206, 21256, 21456, 2706, 2756, 2806, (2826, 826 hydro or gear drive), 2856, 3088, 3288, 706, 756, (766 gear drive), 786, 806, 856, 886, (966 hydro or gear drive), (986 serial number up to 23999 and 28000 and up), Hydro 100, (Hydro 186 serial number up to 11999). (Item #: 173445, Ref: 380319R1) $268.00

Gear, Reverse Idler - 30 tooth. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 2706, 2756, 2806, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 966, 986. (Item #: 122675, Ref: 393523R1) $308.00

Link Assembly - Upper range transmission selector. For tractor models 1026, 1066, 1206, 1256, 1456D, 1466, 1468, 1566, 1568, 21206, 21256, 21456D, 2706, 2756, 2806, 2826, 2856, 706, 756, 766, 806, 826, 856, 966, Hydro 100. (Item #: 126846, Ref: 393354R91) $26.80

Over Center Lever, Used - For International tractor models Hydro 100, 706, 756, 766 (s/n 7611-earlier), 806, 826, 856, 966 (s/n 14232-earlier), 1026, 1066 (s/n 17320-earlier), 1206, 1256, 1456, 1466 (s/n 12279-earlier), 1468 (s/n 7142-earlier), 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM nos 539624R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434264) $33.01

Parking Gear - 35 teeth, 17 spline. For tractor models Hydro 186, 706, 756, 786, 806, 826, 856, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, Hydro 3488, 3588, 3688, 3788, 6388, 6588, 21026, 21206, 21256, 21456. Replaces 380288R2 138764C1, 138764C2, 380288R1. (Item #: 111278, Ref: 138764C2) $202.00

PTO Lever - For International / Farmall tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM number 387884R1, Includes knob, (Item #: 128298) $174.01

No
Picture
Range Transmission Cover, Remanufactured, 380314R41 - For International / Farmall tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM number 380314R41, Includes Filler Tube and Gasket, (Item #: 210980) $121.00

Reverse Idler Gear, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21206, 21256, 21456, Replaces International OEM number 393525R2, 380301R1, 393525R1, 1 1/4" Thick Teeth, Teeth: 34 and 21, For a new version of this item use Item #: 122677, (Item #: 422677) $140.01

Reverse Idler Gear, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 393523R1, Teeth: 30 and 21, For a new version of this item use Item #: 122675, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 422675) $100.01

Reverse Shift Fork, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM nos 380308R2, 380308R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430336) $50.01

Shift Cam, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4100, 4156, 4166, 4186, 6388, 6588, 21026, 21206, 21256, 21456, Replaces International OEM nos 380114R22, 380114R21, 430114R20, 430114R19, 430114R18, 430114R17, 430114R16, 430114R15, 430114R14, 430114R13, 430114R12, 430114R11, Speed Transmission, Gear Drive Tractors, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430723) $75.01

Shift Detent Plate - Transmission speed cover, comes with rivets. For tractor models 1066, 1206, 1256, 1456, 1466, 1468, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 706, 756, 766, 806, 826, 856, 966. (Item #: 173010, Ref: 830443) $38.50

Shift Detent Plate - For International / Farmall tractor models 706, 806, 1206, 2706, 2806, 4100, 4156, 4166, 4186, Compatible with International Construction and industrial models 21206, Replaces International OEM number 830438, With Rivets, Cam Is Not Included, (Item #: 110522) $26.20

Shift Fork Assembly, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Replaces International OEM nos 380123R21, Speed Transmission, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498620) $68.01

Spacer, Countershaft Gears - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786 (1/74-12/80), 806, 826, 856, 886 (1/74-12/80), 886, 966, 986 (1/74-12/79), 1066, 1086 (1/74-12/79), 1206, 1256, 1456, 1466, 1468, 1486 (1/74-12/79), 2706, 2756, 2806, 2856, 3088 (1/81-12/86), 3288 (1/81-12/86), 3388 (1/79-12/81), 3588 (1/79-12/81), 3688 (1/81-12/86), 4100, 4156, 4166, 4186 (1/76-12/79), 6388 (1/81-12/83), 6588 (1/81-12/83), Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 380126R2, 380126R1, (Item #: 170256) $28.50

TA Gauge #60 - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 21206, 21256, 21456, (Item #: 122052) $65.37

TA Gauge #600 - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 2706, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 21256, 21456, (Item #: 122053) $65.37

Torque Amplifier Eliminator Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, Compatible with International Construction and industrial models 21206, 21256, 21456, Includes: Elimination Shaft, front housing, plugs, O-ring, bushing, gear used for spacer, MCV Pump, Gasket Set, Speed transmission main shaft also required if existing main shaft is not drilled through the center, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 111247) $1159.01

Torque Amplifier Gear, Constant Mesh - For tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 6388, 6588, 21206, 21256, 21456. (Item #: 110264, Ref: 382349R1) $179.00

No
Picture
Torque Amplifier Heavy Duty, Remanufactured - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, Compatible with International Construction and industrial models 21206, 21256, 21456, Direct Drive Disc: 4, Anti-Free Wheel (TA) Disc: 2, Upper gear with 22 teeth, lower gear with 51 teeth, Universal hydraulic oil (2.5 gallon) use Item #: 124173, Additional Handling and Oversize Fees Apply To This Item, (Item #: 204241) $1030.00

Torque Amplifier Kit, Remanufactured - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, Compatible with International Construction and industrial models 21206, 21256, 21456, Iincludes: Torqure Amplifier, Gasket, Quill, MCV Pump, Lower Gear, Upper Gear: 22 tooth and 25 degree, Direct Drive Disc: 3, Anti-Free Wheel (TA) Disc: 2, Lower Gear: 51 tooth and 25 degree, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 204451) $1805.52

Torque Amplifier, Remanufactured - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, Compatible with International Construction and industrial models 21206, 21256, 21456, Direct Drive Disc: 3, Anti-Free Wheel (TA) Disc: 2, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 204453) $1030.00

Transmission Brake Lever Assembly - For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 100. Replaces 384311R11, 384311R21. (Item #: 111367, Ref: 1981317C1) $68.00

Transmission Brake Operating Rod - For tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 2706, 2756, 2806, 2826, 2856, 21206, 21256, 21456. (Item #: 172774, Ref: 384307R1) $95.00

Transmission Brake Pad and Screw - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2806, 2826, 2856, 3388, 3588, 3788, 4100, 4156, 4166, 21206, 21256, (Item #: 168453) $27.00

Transmission Countershaft Nut - For International / Farmall tractor models 706 (756), 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 148952C1, 148952C2, LH Thread, (Item #: 113418) $20.10

Electrical System

Alternator - Alternator, 12 volt, 61 amp, external regulator, 2 terminal 12 o-clock position. For 100, 1000, 105, 1066, 110, 1100, 1110, 115, 120, 1200, 1206, 1256, 1275, 1300, 1456, 1466, 1468, 200, 205, 210, 21206, 21256, 21456, 222, 225, 23, 230, 2444, 2544, 2606, 2656, 2706, 275, 2756, 2806, 2856, 3110, 315, 3410, 3444, 3514, 3516, 3616, 375, 3800, 3850, 403, 4100, 4300, 444, 503, 504, 544, 601, 602, 606, 616, 622, 656, 706, 756, 766, 806, 815, 856, 915, 966, HYDRO 100. (Item #: 113606, Ref: 1100883) $126.00

Alternator - 12 volt, 55 amp. For tractor models (856D 1967 to 1971 with 407 diesel), (1026D, Hydro 1026D 1970 to 1971 with 407 diesel), (1206D 1965 to 1967 with 361 diesel), (1256D 1967 to 1969 with 407 diesel), (1456D 1969 to 1971 with 407 diesel), (444 1967 to 1971 with 153 gas), (454 1970 to 1971 with 157 gas), (454D 1970 to 1973 with 179 diesel), (544 1968 to 1973 with 200 gas), (544D 1968 to 1973 with 239 diesel), (574 1970-72 with 200 gas), (574D 1970-72 with 239 diesel), (606 1965 to 1967 with 221 gas/LPG), (606D 1965 to 1967 with 236 diesel), (2444 1968 to 1970 with 153 gas), (2444D 1968 to 1970 with 154 diesel), (2544 1969 to 1970 with 200 gas), (2544D 1969 to 1970 with 239 diesel), (2656 1971 to 1972 with 263 gas/LPG), (2656D 1971 to 1972 with 268 diesel), (2756 1967 to 1971 with 291 gas/ 310 diesel), (2806 1965 to 1967 with 301 gas), (2806D 1965 to 1967 with 361 diesel), (2826 1970 to 1971 with 301 gas). Replaces 1100805, 1100883, 1100791, 1100778, 1100720, 1100771. (Item #: 113606, Ref: ADR0231) $126.00

Blower Motor - This Blower Motor is 4 wire, 12 volt 3/8 inch x 4 1/4 inch shaft, 3 speed, body length 4 1/8 inches, body diameter 3 1/2 inches. It is used on Tractors: 656, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2656, 2706, 2756, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 4568, 4586, 4786, Hydro 100, Hydro 186. Combine: 715, 815, 915, 1420, 1440, 1460, 1470, 1480. Windrower: 4000, 5000, 5500, 8830. Replaces 539053R3, 539053R2, 539053R1, 1987442C1, 1987399C3, 175577C2, 175577C1. (Item #: 108656, Ref: 72162089) $78.00

Distributor Cap - Clip type, services 6 cylinder tractors with International distributors. For tractor models 2606, 2706, 2806, 460, 560, 606, 656, 660, 666, 686, 706, 756, 806, 826, 856, Hydro 70, Hydro 86. (Item #: 105298, Ref: 368062R1) $11.00

Distributor Condenser - Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Item #: 111108, Ref: 353903R1) $6.60

Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $9.60

Distributor, Remanufactured, 368051R - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 756, 806, 826, 856, 2606, 2656, 2706, 2806, 2856, Replaces International OEM number 368051R, Includes new distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit, (Item #: 203534) $468.01

No
Picture
Generator - Delco Style (9446), Remanufactured, Delco Remy, 1102337 - For International / Farmall tractor models 806, 2806 (both diesel), Replaces Delco Remy manufacturer number 1102337, Replaces manufacturer number 9446, 340-99, 92-01-3110, Delco Style, Voltage: 12, Rotation: Clockwise, Amperage: 35, Regulator: External, (Item #: 203519) $389.03

Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on International Models: Cub, 806, 1066, 2656, Hydro 100, Hydro 70, 2706, 2756, 2806, 2826, 5500, Hydro 84, Hydro 86, Hydro 186, 140, 154, 185, 616, 622, 544, 574, 656, 664, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 385, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 484, 485, 2544, 584, 585, 4100, 4156, 4166, 684, 685, 686, 784, 785, 786, 884, 885, 886, 986, 1086, 1486, 1586, 21456, 3388, 260A, 258, 278, 5088, 21256, 3588, 3688, 21206, 5288, 3088, 3788, 2400, 3488, 6588, 3288, 6388, 5488, 248, 6788. Verify OEM number or measurements before ordering. Many of these models used more than on switch. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $30.00

Point Set - For International / Farmall tractor models 504, 606, 660, 706, 806, 2504, 2606, 2706, 2806, Replaces International OEM number 372951R91, 21A163, 1962 and later, For distributor with a gap of .020", (Item #: 111107) $13.50

Starter - Delco Style (4235), Remanufactured, Delco Remy, 1108334 - For International / Farmall tractor models 706, 756, 766, 806, 856, 2756, 2806, 2856 (all gas), Replaces Delco Remy manufacturer number 1108334, 1109359, Replaces manufacturer number 140-746B, 4235, Delco Style, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For Starter Drive use Item #: 110771, (Item #: 203451) $484.80

No
Picture
Starter - Delco Style (4325), Remanufactured, A481102Z, Delco Remy, 1107275 - For International / Farmall tractor models 706, 806, 2806, Replaces Case OEM number A481102Z, Replaces Delco Remy manufacturer number 1107275, 323-638, Replaces manufacturer number 4325, 140-749, 91-01-3993, Delco Style, Voltage: 12, Rotation: Counter Clockwise, Teeth: 9, (Item #: 203462) $331.79

No
Picture
Starter - Delco Style DD (3952), Remanufactured, Delco Remy, 1113642, 381035R92 - For International / Farmall tractor models 766, 806, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2806, 2826, 2856 (all diesel), Compatible with International Combine (s) 815, 915, Replaces International OEM number 381035R92, 102263A1, Replaces Delco Remy manufacturer number 1113642, 1113647, Replaces manufacturer number 91-01-3985, Delco Style: Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, Mounting Type: Flange, Mounting Holes: 3, For a New version of this sku use Item #: 160357, (Item #: 203147) $463.50

Starter Drive - Replaces; 1877350, 1948877, 1933838, 800965. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21456, 21256, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 350, 3588, 3688, 3788, 4166, 4186, 450, 560, 6388, 6588, 660, 6788, 706, 756, 766, 786, 806, 815, 826, 856, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 3488. With spiral shaft. (Item #: 117546, Ref: 1651487C1) $34.40

Starter Drive - Delco Style - Ratchet Type - For International / Farmall tractor models Hydro 100, Hydro 186, W450, 350, 350U, 400, 450, 460, 560, 660, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2606, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4166, 4186, 6388, 6588, 6788, Compatible with International Combine (s) 815, 915, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 500, Replaces International manufacturer number 1107341, 1108640, 1108646, 1107544, 1108659, 1113034, 1113053, 1113176, 1113197, 1113685, 1113434, 1113440, 1113398, 1113409, 1113684, 1113642, 1113647, 1113439, 1113432, 1113446, 1113489, Replaces Delco Remy Starter Drive number 1877350, Replaces Delco Remy Starter number 1108640, 1108646, 1108336, 1109433, 1107390, 1109425, 10455339, 10455354, 10465416, 10465430, 1107341, 1998392, 1998290, 1998300, 10455323, 1107532, 1998332, 1998375, 1107873, 1109260, 1109271, 1107544, 1108659, 1107779, 1113034, 1113053, 1113176, 1113149, 1113197, 1113685, 1113434, 1113440, 1113398, 1113409, 1113684, 1113642, 1113647, 1113439, 1113432, 1113446, 1113489, 1108475, 1113071, 1113117, 1113118, 10455320, Delco Style, Teeth: 10, Outer Diameter: 39.5mm, Inner Diameter: 14.3mm, Rotation: Counter Clockwise, Overall Length: 96.5mm, Clutch Type: Ratchet, Splines: 3, (Item #: 111104) $33.90

Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $13.40

Tune-up Kit, Basic - Kit contains: rotor, condenser, points and proper point gap gauge. For tractor models Cub, Cub Lo-Boy, 140, 340, Hydro 70, Hydro 86, 460, 560, 606, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2706, 2756, 2806, 2826, 2856. All with 4 or 6 cylinder gas engines and battery ignition, 1963 and later with IH distributor (not for Prestolite). YTO-ATK9BIR (Item #: 105296, Ref: ATK9BIR) $19.70

Voltage Regulator, 12 Volt - Regulator, 12 volt, for tractors with alternators. Models: 664, 706, 806, 826, 1206, 2706, 2806, 21206. For 1206, 21206, 2706, 2806, 664, 706, 806 (Item #: 105289, Ref: 1119515) $20.50

Voltage Regulator, 12 Volt - Flat Mount Voltage Regulator. For tractor models 2404, 2424, 2504, 2606, 2656, 2706, 2806, 404, 424, 504, 606, 656, 706, 806. Replaces Delco 1119000, 35A5137 1118897, 121579C1, 375055R1. (Item #: 105521, Ref: 121579C1) $86.00

Engine Bearings

No
Picture
Cam Bearing Set - Camshaft bearing kit, 4 bearings. Individual bearings not available. For C291 CID gas 6 cylinder. For engine in tractors 666, 686, 706, 756, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (Item #: 106671, Ref: CBK-H221) $36.10

No
Picture
Cam Bearing Set - CAM BEARING SET. For 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2806, 2856, 806, 815, 856, 915. (Item #: 106673, Ref: CBK-H361) $57.17

Camshaft Bearing Kit - 4 bearings. For tractor models 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. All with either C221, C263, C291, C301, D236, D282 6 cylinder engines. Can Be used on C157, C175 and C200 Engines by also purchasing 398019R1 front cam bearing separately. Not for German Diesel Engines. Replaces 130476R91, 130476R92, 130476R93, 70131R1, 70132R1, 70259R2, 70260R1, 70260R2, 70261R2, 70262R1, 71326R1 (Item #: 106671, Ref: CBK-H221) $36.10

No
Picture
Camshaft Bearing Set - For tractor models 806, 2806. (D361 CID Diesel 6-cylinder engine. Cupped head piston) and models 1206, 21206. (D361 CID Turbo Diesel 6-cylinder engine. Cupped head piston). If other than standard, specify size in comments. (.010, .020) (Item #: 106673, Ref: CBK-H361) $57.17

Connecting Rod Bearing Set - .020" - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Replaces International OEM number 376667R91, Size: .020", (Item #: 184148) $197.00

IPTO Overhaul Kit - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 886 (s/n 16999-earlier), 966, 986 (s/n 23999-earlier), 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (s/n 25999-earlier), 2706, 2756, 2806, 2826, 2856, 3388 (s/n 10384-earlier), 21026, 21206, 21256, 21456, Replaces International OEM number 977721, Contains gaskets, o-rings, seals, clutch pack, Does not include brake pistons, For units with spring activated brakes, (Item #: 112178) $153.00

IPTO Seal and Bushing Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2806, 2826, 2856, 3088, 3288, 3688, 21256, 21456 (All Less TA), Replaces International OEM number 535209R91, 535208R91, 22419R1, 22414R1, 384185R1, Contents: (1) 535208R91 IPTO Rear Seal, (1) 535209R91 IPTO Front Seal, (1) 22419R1 TA Casting O-Ring, (1) 22414R1 IPTO Bearing Cage O-Ring, and (1) 384185R1 IPTO Bronze Bushing, (Item #: 149801) $49.80

No
Picture
Main Bearing Set, .010 - Main bearing set. For tractor models 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2806, 2856, 806, 815, 856, 915. (Item #: 106625, Ref: MBK-H361D-010) $228.58

Main Bearing Set, .010 - .010 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376679R91, 332276R91, 376670R91, 376673R91, YTO MBK221-010 (Item #: 106613, Ref: MBK221-010) $120.00

Main Bearing Set, .010 - Main Bearing Kit (.010 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 376670R91, 332276R91, 376673R91, 376679R91 (Item #: 167378) $109.00

Main Bearing Set, .020 - .020 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376683R91, 332279R91, 376686R91, 376692R91, YTO MBK221-020 (Item #: 106614, Ref: MBK221-020) $145.00

Main Bearing Set, .020 - Main Bearing Kit (.020 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 190746) $217.00

Main Bearing Set - .030 - 0.030 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used for the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382358R91, 332270R91, 367291R91, 367297R91 (Item #: 106615) $185.00

Main Bearing Set, .030 - Main Bearing Kit (.030 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 167101) $70.00

No
Picture
Main Bearing Set, Standard - Main bearing set. For tractor models 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2806, 2856, 806, 815, 856, 915 (Item #: 106624, Ref: MBK-H361D) $237.00

Main Bearing Set, Standard - Standard main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382357R91: 1-367276R91, 1-367282R91, 1-367279R91 and 1-367285R91 YTO MBK221 (Item #: 106612, Ref: MBK221) $101.00

Main Bearing Set, Standard - Main Bearing Kit (standard) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 382357R91, YTO MBK221A (Item #: 185622, Ref: MBK221A) $98.00

PTO Overhaul Kit - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 886 (s/n 16999-earlier), 966, 986 (s/n 23999-earlier), 1026, 1066, 1086 (single speed s/n 25999-earlier and dual speed s/n 47999-earlier), 1206, 1256, 1456, 1466, 1468, 1486 (s/n 25999-earlier), 2706, 2756, 2806, 2826, 2856, 3388 (s/n 10384-earlier), 21026, 21206, 21256, 21456, Replaces International OEM number 977722, 877721, For units with spring activated brakes, (Item #: 112250) $225.00

Range Cover Gasket - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 380315R2, 380315R1, Length: 14-3/8", Width: 8", (Item #: 166208) $8.20

Release Bearing Carrier - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 380109R1, 69789C1, I.D.: 2.500", O.D.: 4.154", Thickness: .865", (Item #: 112251) $115.00

Rod Bearing Set - ROD Bearing SET For 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966 (Item #: CRK-H361D) $105.09

No
Picture
Rod Bearing Set, .010 - Rod bearing set. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966. (Item #: CRK-H361D-010) $69.23

No
Picture
Rod Bearing Set, .020 - Rod bearing set. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966. (Item #: CRK-H361D-020) $95.18

No
Picture
Speed Transmission Cover Gasket - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, 4186, 21026, 21256, 21456, Replaces International OEM number 380112R13, (Item #: 176726, Ref: 380112R13) $13.30

Engine Gaskets

Front Crank Seal - FRONT CRANK SEAL. For 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2806, 2856, 806, 815, 856, 915. (Item #: 106648, Ref: 606780C93) $24.40

Full Gasket Set - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Engine (s) C221 (6 cylinder), C263 (6 cylinder), C291 (6 cylinder), C301 (6 cylinder), Includes crankshaft seals, (Item #: 186637) $154.00

Gasket Set, Upper - Head Gasket Set - For tractor models 806, 1206, 2806, 21206 with D361 or DT361 Diesel Engine (Item #: 106693, Ref: HS3835W) $152.00

Gasket set with seals - Complete Gasket Set with Seals. For tractor models 806, 2806. (D361 CID Diesel 6-cylinder engine. Cupped head piston) and models 1206, 21206. (D361 CID Turbo Diesel 6-cylinder engine. Cupped head piston). (Item #: 191953, Ref: GK7699) $443.00

Head Gasket Set - For 361 CID 6-cylinder diesel in models: 1206, 21206, 2806, 806. (upper gasket set with head gasket). (Item #: 184039, Ref: VGK3835W) $283.79

Head Gasket Set - For C291 or C301 CID gas 6 cylinder engines in tractors: 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (upper gasket set with head gasket). (Item #: 106689, Ref: VGK7799S) $99.00

Oil Pan Gasket - For tractor models 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2806, 2856, 806, 815, 856, 915. Replaces 328731R1, 341297, AV101876. Due to the package size require to ship this gasket, $15 addtional will be added. This will be included as part of the shipping total on your order. (Item #: 106709, Ref: OPG345287R94) $39.30

Oil Pan Gasket - Oil Pan Gasket. For C291 CID gas 6 cylinder engine in tractors 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (Item #: 106706, Ref: 369984R1) $10.30

Push Rod Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301, D236, D282, Replaces International OEM number 369982R1, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128736) $15.10

Rear Crank Seal - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966. (Item #: 106660, Ref: 691631C91) $31.20

No
Picture
Rear Crankshaft Seal - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 4166, 4186, 5088, 6388, 766, 806, 815, 856, 915, 966 (Item #: 106660, Ref: 1809964C92) $31.20

Rear Crankshaft Seal Kit - Fits: (Hydro 70, Hydro 86, 2544, 2756, 2806, 2826, 2856, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856 all gas, LP), (2504, 340, 504 all diesel (no German diesels), (2606, 2656, 2706, 460, 560, 606, 656, 660, 706 all gas, LP, diesel (no German diesels), Constructall, Industrial: 2500 (diesel (no German diesels), (Industrial: 100C, 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62 all gas, LP), (150, H25B, H50A, H50B, H50C, TD6-62, TD9B all diesel (no German diesels), (3514, 3616, 3800, 3850, H30B all gas, LP, diesel (no German diesels). Fits following engines/power units: C-157, C-175, C-200, C-221, C-263, C-282, C-291, C-301, D-188, D-236, D-282, D-301. 4.568 inch outside diameter, 4.000 inch inside diameter, 0.375 inch wide, set includes: 1 piece lip seal, rear seal housing gasket, and 2 plugs. Replaces: 308406R1, 368568R1, 374006R91, 393180R91, 403066R91, 538983R1. (Item #: 106656, Ref: IHS2411) $21.30

Valve Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301 (Gas), Replaces International OEM number 369983R2, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128683) $9.80

Engine Rebuild Kits

Basic Engine Overhaul Kit, Less Bearings - For tractor models 806, 2806. (D361 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, complete gasket set with crankshaft seals. Engine Bearings and Pin Bushings are not included. (Item #: 130616, Ref: BEKH1186-LCB) $1379.01

No
Picture
Basic In-Frame Engine Kit - For tractor models 806, 2806. (D361 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189590, Ref: BIFH1186) $1109.01

Cylinder Kit - Standard - For International / Farmall tractor models 806, 2806, Compatible with International Engine (s) D361 (6 Cylinder Diesel), DT361 (6 Cylinder Turbo Diesel), Replaces International OEM number 601071C93, Standard Liner, 4.125" bore, (Item #: 166497) $198.00

Dry Sleeve - For International / Farmall tractor models 806, 1206, 2806, 21206, Compatible with International Construction and industrial models TD15B, Compatible with International Engine (s) D361 (Diesel, 6 cylinder), DT361 (Diesel Turbocharged, 6 cylinder), Replaces International OEM number A77686, (Item #: 167121) $52.00

No
Picture
Engine Overhaul Kit, Less Bearings - For tractor models 806, 2806. (D361 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: EOK1186-LCB) $1599.41

Engine Rebuild Kit - Less Bearings, C301 - For International / Farmall tractor models 806, 826, 856, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Engine (s) C301 (gas), Bore: 3.8125", Stroke: 4.390", Kit includes: Pistons, Piston Ring Set and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106615, (Item #: 130617) $552.00

Piston and Rings International 392836R92 - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2806, 2826, 2856, Compatible with International Engine (s) C200, C301, Replaces International OEM number 392836R92, .30" Oversize, Includes pin and retainers, (Item #: 128737) $77.00

No
Picture
Rebore Kit - 3 13/16 inch bore. For 806, 826, 856, 2806 with C301 Gas Engine. (Item #: R3392) $381.15

No
Picture
Rebore Kit - .030 Oversize. For tractor models 806, 826, 856, 2806 with C301 Gas Engine. (Item #: R3393) $538.20

No
Picture
Rebore Kit - .040 Oversize For 806, 826, 856, 2806 with C301 Gas Engine (Item #: R3394) $381.15

Valve Overhaul Kit - Fits 656, 706, 2656, 2706, 666, 686, 756, 766, 2756, Hydro 70, 86, 806, 826, 2806, 2826, 2856 (Gas 6 cylinder, C263, C291, C301). Kit includes valves (Stellite Exhaust Valve), valve springs, valve keys, valve guides. (Item #: 120320, Ref: VOKH263S) $328.00

Engine Parts

Bull Gear, Used - For International tractor models Hydro 100, Hydro 186, 806, 856, 966 (Gear Drive), 986, 1026, 1066 (hydro), 2806, 2826 (Gear Drive), 2856, 3488 (Hydro), 3588, 3688, 6588, 21026, Replaces International OEM nos 384075R1, Width: 3 1/4", Splines: 28, Teeth: 73, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497321) $370.01

Cam Pivot Shaft, Used - For International tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM number 391018R21, For a new version of this item use Item #: 111209, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 445279) $10.26

No
Picture
Cam Retaining Coupler - For International / Farmall tractor models 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 21206, 21256, 21456, Replaces International OEM number 380117, Includes: 2 Grooved Pins, (Item #: 176730) $74.00

Camshaft - For International / Farmall tractor models 806, 856, 1026, 1206, 1256, 1456, 2806, 2856, 21026, 21206, 21256, 21456, Compatible with International Combine (s) 815 (s/n 8000-earlier), 915 (s/n 8000-earlier), Compatible with International Construction and industrial models TD15B (late), Compatible with International Engine (s) D361, DT361, D407, DT407, Replaces International OEM number 670349C1, For a New version of this sku use Item #: 108174, (Item #: 111336) $311.00

Camshaft - For International / Farmall tractor models Hydro 70, Hydro 86, 460 (engine s/n 5610-later), 560 (engine s/n 6765-earlier), 606, 656, 666, 686, 706, 756, 766, 806, 826, 856, 2606 (engine s/n 12799-13753), 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine (s) 101 (engine s/n 11028-later), 151, 181, 205, 303, 315, 403, 453, 503, 615 (engine s/n 44821-earlier), 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6 (engine s/n 36694-56634), TD6 (early), TD9, TD9B (engine s/n 6902-earlier), 3800, 3850 (engine s/n 71777-later), Compatible with International Engine (s) C221, C263, C291 (late), C301, D236 (narrow flange liners), D282, DT282, D301 (narrow flange liners), Replaces International OEM number 367229R1, (Item #: 160894) $279.00

No
Picture
Camshaft, Remanufactured, 670349C1 - For International / Farmall tractor models 806, 856, 1026, 1206, 1256, 1456, 2806, 2856, 21026, 21206, 21256, 21456, Compatible with International Combine (s) 815 (s/n 8000-earlier), 915 (s/n 8000-earlier), Compatible with International Construction and industrial models TD15B (late), Compatible with International Engine (s) D361, DT361, D407, DT407, Replaces International OEM number 670349C1, (Item #: 210290) $243.01

No
Picture
Clutch Compartment Cover, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 21206, 21256, Replaces International OEM nos 380068R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442982) $22.51

Connecting Rod Bolt - For International / Farmall tractor models 806, 1026, 1206, 1256, 1456, 2806, 2856, 21026, 21206, 21256, 21456, Compatible with International Combine (s) 815, 915, Compatible with International Construction and industrial models TD15B, Compatible with International Engine (s) D361, DT361, D407, DT407, Replaces International OEM number 326563R1, 326563R2, (Item #: 156101) $11.70

Connecting Rod, Remanufactured, 341113R94, 332260R1 - For International / Farmall tractor models 806, 856, 1206, 1256, 2806, 21206, Replaces International OEM number 341113R94, 341113R93, Replaces International Casting number 332260R1, (Item #: 210291) $136.01

Connecting Rod, Used - For International tractor models 806, 856, 1206, 1256, 2806, 21206, Replaces International OEM number 341113R94, 341113R93, Replaces International Casting nos 332260R1, Wrist Pin ID: 1.5", For a Remanufactured version of this part use Item #: 210291, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429499) $50.01

Connecting Rod, Used - For International tractor models Hydro 70, Hydro 86, 454, 460, 464, 544, 560, 606, 656, 660, 666, 674, 686, 706, 756, 806, 856, 2400A, 2400B, 2500, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine(s) 50, 205, 303, 315, 403, 715, Compatible with International Harvester(s) 55, 350, 414, 420, 550, 616, 622, 650, Compatible with International Engine(s) C157, C175, C200, C221, C263 (C282), C291, C301, Replaces International OEM nos 367406R21, 367406R11, 367406R12, LP and Gas Engines Only, Pin Diameter: .875", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498381) $25.01

Constant Mesh Gear, Used - For International tractor models 706, 756, 806, 856, 1206, 1256, 2706, 2756, 2806, 2856, 21206, 21256, Replaces International OEM nos 380161R2, Replaces Casting nos 380161R1, Teeth: 50, Splines: 24, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434903) $289.01

Crankshaft Vibration Dampener - For International / Farmall tractor models 806, 856, 1026, 1206, 1256, 1456, 2806, 2856, 21026, 21206, 21256, 21456, Compatible with International Engine (s) D361, DT361, D407, DT407, Replaces International OEM number 701036C93, 701036C91, 701036C92, ID: 1.9365", OD: 9.136", Width: 3.57", (Item #: 115029) $390.00

Driving Gear - 1st, Used - For International tractor models 706, 756, 806, 856, 1206, 1256, 2706, 2756, 2806, 2856, 4100, 21206, 21256, Replaces International OEM nos 390259R1, Teeth: 27, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438717) $133.01

Engine Block, Bare, Remanufactured - For International / Farmall tractor models 806, 1206, 2806, 21206, Compatible with International Engine (s) D361, DT361, Replaces International Block Casting number 607294, Replaces International OEM number 607294C, Replaces International Casting number M607294C1, 607294C1, Our remanufactured bare blocks have been; cleaned, inspected, (Item #: 210178) $2150.01

No
Picture
Exhaust Valve Seat - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460 (s/n 35093-earlier), 464, 544, 560 (s/n 36693-later), 574, 606 (s/n 35093-earlier), 656, 660 (s/n 38981-later), 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606 (s/n 35093-earlier), 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 151, 181, 205, 303, 315, 403 (s/n 2225-earlier), 453, 615, 715, Compatible with International Harvester (s) 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, Compatible with International Construction and industrial models T6 (s/n 36694-56634), 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2500B, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C200, C221, C263, C291, C301, Replaces International OEM number 126373R1, (Item #: 185617) $4.10

Forward Reverse Shift Collar, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM nos 393524R1, 380302R1, 3.61" Dia., Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498210) $50.01

Front Engine Plate, Used - For International tractor models 806, 1206, 2806, 21206, Compatible with International Engine(s) D361, DT361, D407, DT407, Replaces International OEM nos 328732R11, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435345) $89.01

Gear -1st and 2nd, Used - For International tractor models 706, 756, 806, 856, 1206, 1256, 2706, 2756, 2806, 2856, 21206, 21256, Replaces International OEM nos 380124R1, Splines: 20, Teeth: 41 and 46, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438716) $130.01

Hi-Lo Driven Gear Carrier, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 380289R1, Height: 2", Outside Diameter: 2 3/4", Splines: 17, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431513) $35.01

Hi Lo Shift Collar, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 393521R1, Diameter: 5.05", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498208) $50.01

Injection Pump Drive Gear, Used - For International tractor models 806, 1206, 2806, 21206, Compatible with International Engine(s) D361, DT361, D407, DT407, Replaces International OEM nos 341525R1, Teeth: 58, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435352) $176.01

Injection Pump Idler Gear, Used - For International tractor models 806, 1206, 2806, 21206, Compatible with International Engine(s) D361, DT361, D407, DT407, Replaces International OEM nos 326612R1, Teeth: 25, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435353) $205.01

Lifter - This Lifter is used on International D361, DT361, D407, DT407 Engines. It replaces original part number 16040DD (Item #: 108174, Ref: 16040DD) $14.57

Low Drive Gear, Used - For International tractor models 706 (s/n Farmall 40811-later, International 5649-later), 756 (s/n Farmall 17638-earlier, International 8424-earlier), 806 (s/n Farmall 28275-later, International 7928-later), 856 (s/n Farmall 27286-earlier, International 9492-earlier), 1206, 1256, 2706 (s/n Farmall 40811-later, International 5649-later), 2756 (s/n Farmall 17635-earlier, International 8924-earlier), 2806 (s/n Farmall 28275-later, International 7928-later), 2856 (s/n Farmall 27286-earlier, International 9492-earlier), 21026, 21206, Replaces International OEM number 391883R1, Teeth: 28 and 33, ID: 2.48", Splines: 24, For Hi-Low Drive Gear use Item #: 455261, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430255) $125.01

Pump Drive Gear, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 21026, 21206, 21256, 21456, Replaces International OEM number 380319R1, Teeth: 61, Splines: 12, Thickness: 9/16", For a new version of this item use Item #: 173445, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499220) $85.01

Push Rod - For [Hydro 70, Hydro 86, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856, 2544, 2756, 2806, 2826, 2856 (Gas and LP Only)], [340, 504, 2504 (Diesel)], [460, 560, 606, 656, 660, 706, 2606, 2656, 2706 (Gas, LP, Diesel (No German Diesels)], [Industrial: 100C, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62, T7 (Gas and LP Only)], [150, H25B, H30A, H30F, H30R, H50A, H50B, H50C, H60B, S7A, S7B, TD340, TD6-62, TD9-91, TD9-92, TD9B (Diesel)], CONSTRUCTALL: 2500 (Diesel), [Industrial: 3514, 3616, 3800, 3850, H30B (Gas, LP, Diesel (No German Diesels)]. Replaces: 164436R91. Size: 12.684 O/A length, .375 tube dia. (Item #: 184399, Ref: 164436R91) $19.30

Push Rod Cover, Used - For International tractor models 806, 1206, 2806, 21206, Compatible with International Engine(s) D361, DT361, D407, DT407, Replaces International OEM nos 601812C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435343) $21.01

Push Rod, Used - For International tractor models 806, 856, 1026, 1206, 1256, 1456, 2806, 21206, Compatible with International Engine(s) D361, DT361, D407, DT407, Replaces International OEM nos 343465R91, Length: 12 1/8", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430286) $10.01

Range Transmission Shift Cam - For International / Farmall tractor models 706, 806, 1206, 2706, 2806, 4100, 4156, 4166, 4186, 21206, Replaces International OEM number 380306R51, (Item #: 113404) $200.00

Rear Engine Plate, Used - For International tractor models 806, 1206, 2806, 21206, Compatible with International Engine(s) D361, DT361, D407, DT407, Replaces International OEM nos 332446R21, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435346) $204.01

Retainer - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2544, 2608, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 460, 504, 5088, 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 167178, Ref: 48703D) $8.40

No
Picture
Selector Drive Arm, Used - For International tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM number 382518R1, 382518, For a new version of this item use Item #: 156640, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436185) $34.01

Shift Cam, Used - For International tractor models 706, 806, 1206, 2706, 2806, 4100, 4156, 4166, 4186, 21206, Replaces International OEM number 380306R51, 380306R, Replaces OEM 380306R11 - 380306R50, For a new version of this item use Item #: 113404, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434905) $128.01

Shift Rail, Used - For International tractor models 706, 756, 766, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 380122R1, Speed Transmission, Gear Drive Tractors, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430720) $27.01

Sliding Gear, 3rd and 4th, Used - For International tractor models 706, 756, 806, 856, 1206, 1256, 2706, 2756, 2806, 2856, 21206, 21256, Replaces International OEM number 380125R2, Splines: 20, Teeth: 25 and 31, 3rd and 4th, For a new version of this item use Item #: 172447, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433106) $261.01

Timing Gear Cover, Used - For International tractor models 806, 1206, 2806, 21206, Compatible with International Engine(s) D361, DT361, D407, DT407, Replaces International OEM nos 349040R2, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435344) $151.01

Torque Amplifier Drive Gear, Used - For International tractor models 706 (s/n 4601-later, Farmall s/n 29001-later), 756 (s/n 8424-earlier, Farmall s/n 17635-earlier), 806 (s/n 5701-later, Farmall s/n 23001-later), 856 (s/n 9492-earlier, Farmall s/ 27286-earlier), 1206, 1256, 2706 (s/n 4601-later, Farmall s/n 29001-later), 2756 (s/n 8424-earlier, Farmall s/n 17635-earlier), 2806 (s/n 5701-later, Farmall s/n 23001-later), 2856 (s/n 9492-earlier, Farmall s/ 27286-earlier), 21206, 21256, Replaces International OEM nos 392291R1, Teeth: 51, Splines: 25, Outside Diameter: 8 3/16", Inside Diameter: 2 9/16", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436799) $141.01

Torque Amplifier Input Shaft - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 6388, 6588, Compatible with International Construction and industrial models 21256, 21456, Replaces International OEM number 380076R4, 26 Tooth, (Item #: 162945) $572.00

Torque Amplifier Quill, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 6388, 6588, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 382349R1, 382349N, For a new version of this item use Item #: 110264, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410264) $79.01

Transmission Countershaft, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 148951C1, 148951C, Tubular, LH Thread, Early SN 66 and prior models requires spacer 71147C1, 71147C2, For a new version of this item use Item #: 113419, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497400) $179.01

Transmission Drive Shaft - For International / Farmall tractor models 806, 1206, 2806, 21206, Replaces Case IH OEM number 393518R91, (Item #: 165357) $142.00

Transmission Drive Shaft, Used - For International tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Replaces International OEM number 380076R4, 380076R1, 380076R2, 380076R3, Teeth: 26, Splines: 11, For a new version of this item use Item #: 162945, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499217) $234.01

Valve, Exhaust - For tractor models 806, 2806. (D361 CID Diesel 6-cylinder engine. Cupped head piston) and models 1206, 21206. (D361 CID Turbo Diesel 6-cylinder engine. Cupped head piston) and models 856, 2856 Tractors and 815 Combines with D407 and 1026, 1256, 21026, 21256 Tractors with DT 407. (D 407 CID and DT407 CID Turbo Diesel 6-cylinder engine. Cupped head piston. Piston pin diameter 1-1/2 inch). (Item #: 169732, Ref: 612313C1) $14.20

Valve Guide - For tractor models 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2806, 2856, 806, 815, 856, 915. Price shown is for each, sold only in multiples of 12 items. (Item #: 172675, Ref: 326505R3) $4.60

Valve Guide - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Replaces International OEM number 237248R1, (Item #: 128515) $5.70

Valve, Intake - Intake valve for tractor models 806, 2806. (D361 CID Diesel 6-cylinder engine. Cupped head piston) and models 1206, 21206. (D361 CID Turbo Diesel 6-cylinder engine. Cupped head piston) and models 856, 2856 Tractors and 815 Combines with D407 and 1026, 1256, 21026, 21256 Tractors with DT 407. (D 407 CID and DT407 CID Turbo Diesel 6-cylinder engine. Cupped head piston. Piston pin diameter 1-1/2 inch). (Item #: 169731, Ref: 343433R2) $19.30

Valve Rotator - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 205, 303, 315, 403, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, TD6, TD340, 100, 2500B, 2505B, 3500A, 4500B, 8000, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 375604R91, Replaces International Casting number 278368R, Engine: D282 early, Use with Head Casting No. 278368R, (Item #: 109732) $52.00

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT. For 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2806, 2856, 806, 815, 856, 915. Contains: springs, guides, locks, (no valves). (Item #: VSKH361) $230.89

No
Picture
Valve Spring - VALVE SPRING. For 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2806, 2856, 806, 815, 856, 915. (Item #: 173502, Ref: 160907R1) $7.80

No
Picture
Valve Spring - For tractor models 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2806, 2856, 806, 815, 856, 915. (Item #: 172676, Ref: 160908R1) $8.60

No
Picture
Valve Spring - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 560, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 50, 101, 151, 181, 205, 303, 315, 403, 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models TD340, 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, C221, C236, C263, C291, C301, D166, D236, D282, DT282, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 367192R1, (Item #: 185589) $4.20

Valve Spring - Inner - For International / Farmall tractor models 806, 856, 1026, 1206, 1256, 1456, 2806, 2856, 21026, 21206, 21256, 21456, Compatible with International Combine (s) 815, 915, Replaces International OEM number 62264VA, (Item #: 166978) $7.60

Valve Train Kit - For International / Farmall tractor models 806, 826, 856, 2806, 2826, 2856, Valve Keepers 33K701, (Item #: 114735) $270.00

Valve Train Kit - For International / Farmall tractor models 806, 826, 856, 2806, 2826, 2856, (Item #: 120324) $344.00

Engine Pistons and Sleeves

Piston Pin Bushing - For tractor models 1026, 1206, 1256, 21026, 21206, 21256, 2806, 2856, 806, 815, 856. (Item #: 156100, Ref: 326562R1) $12.10

Piston Pin Bushing - Piston pin bushing, 4 or 6 used per engine depending on application. .875 inch inside diameter, .935 inch outside diameter. For C291 CID gas 6 cylinder engine in tractors 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2856, 300, 350, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 109736, Ref: 364913R1) $7.10

No
Picture
Sleeve and Piston Kit - For tractor models 806, 2806. (D361 CID Diesel 6-cylinder engine. Cupped head piston). Sleeves, pistons and rings, pins and retainers. For 4-1/8 inch standard bore. (Item #: PK186) $1088.16

Engine Rings

No
Picture
Piston Ring Set - Standard ring set for 1 piston, 6 used per engine. For C301 CID gas 6 cylinder engine. Contains 1 compression 1/8, 1 compression 3/32, oil ring 1/4 for each cylinder. For 2806, 2826, 2856, 806, 826, 856 (Item #: 120866, Ref: PRS1436) $30.70

No
Picture
Piston Ring Set - PISTON RING SET. For 1206, 21206, 2806, 806, all with 361 CID 6 Cylinder Diesel, standard bore 4 1/8 inch. Contains 1 x 1/8, 1 x 3/32, 1 x 1/4, per cylinder. (Item #: PRS186) $274.99

Piston Ring Set - .030" Oversize - 6 Cylinder - For International / Farmall tractor models 806, 826, 856, 2806, 2826, 2856, Compatible with International Engine (s) C301 (gas, s/n 4996-earlier), Standard Bore: 3.8125", Ring Size: .030" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 6 cylinder set, For .060" use Item #: 150210, (Item #: 150209) $401.00

No
Picture
Piston Ring Set - .030" Oversize - 6 Cylinder Set - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .030” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, For - .030" Oversize - Single Piston Ring Set use Item #: 120863, (Item #: 174308) $154.00

Piston Ring Set - .030" Oversize - Single Cylinder - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .030” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For .030" Oversize - 6 Cylinder Piston Ring Set use Item #: 120865, (Item #: 120863) $30.70

Piston Ring Set - .040" Oversize - 6 Cylinder - For International / Farmall tractor models 806, 826, 856, 2806, 2826, 2856, Compatible with International Engine (s) C301 (gas, s/n 4996-earlier), Standard Bore: 3.8125", Ring Size: .040" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 6 cylinder set, For .030" use Item #: 150211, (Item #: 150210) $309.00

No
Picture
Piston Ring Set - .040" Oversize - 6 Cylinder Set - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .040” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, For .040" Oversize - Single Cylinder Piston Rings use Item #: 120864, (Item #: 174310) $236.00

Piston Ring Set - .040" Oversize - Single Cylinder - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .040” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For .040" Oversize - 6 Cylinder Piston Ring Set use Item #: 120865, (Item #: 120864) $47.10

Piston Ring Set - .060" Oversize - 6 Cylinder - For International / Farmall tractor models 806, 826, 856, 2806, 2826, 2856, Compatible with International Engine (s) C301 (gas, s/n 4996-earlier), Standard Bore: 3.8125", Ring Size: .060" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 6 cylinder set, For .030" use Item #: 150210, (Item #: 150211) $309.00

No
Picture
Piston Ring Set - .060" Oversize - 6 Cylinder Set - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .060” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, Piston Ring Set - .060" Oversize - Single Cylinder use Item #: 120865, (Item #: 174312) $139.00

Piston Ring Set - .060" Oversize - Single Cylinder - For International / Farmall tractor models 544, 574, 674, 806, 826, 856, 2500A, 2500B, 2544, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 2505B, 2510B, 3500A, 8000, Compatible with International Engine (s) C200, C301, Standard Bore: 3.8125", Ring Size: .060” Oversize, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - .060" Oversize - 6 Cylinder use Item #: 120864, (Item #: 120865) $27.80

No
Picture
Piston Ring Set - Standard - 6 Cylinder Set - For International / Farmall tractor models 806, 826, 856, 2806, 2826, 2856, Compatible with International Combine (s) 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Engine (s) C301, Bore: 3.8125", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder set, For Single Cylinder Piston Ring Set use Item #: 120866, (Item #: 174305) $154.00

Piston Ring Set - Standard - Single Cylinder - For International / Farmall tractor models 806, 1206, 2806, 21206 (all diesel), Compatible with International Engine (s) D361, DT361, Bore Size: 4.125", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Keystone Torsional Chrome 15 Degree, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250”, 3rd Groove Style: Chromed Cast Iron oil / Coiled Spring, Sold per cylinder, (Item #: 128994) $18.40

Exhaust System

Exhaust Manifold Center, Used - For International tractor models 806, 856, 2806, 2856, Replaces International OEM number 326699R1, For a new version of this item use Item #: 123842, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 423842) $107.01

Intake Manifold Pilot - Ferrule - For International / Farmall tractor models Hydro 70, Hydro 86, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2656, 2706, 2756, 2806, 2826, Compatible with International Harvester (s) 414, 420, 616, 622, Replaces International OEM number 138733R1, 1.630" Step, 1.690" Outside Diameter, (Item #: 167365) $25.10

Manifold - Diesel exhaust end section. For tractor models 806, 856, 2806, 2856. (Item #: 123843, Ref: 326521R1) $130.00

Manifold - Diesel exhaust center section. For tractor models 2806, 806, 856, 2856. Uses 383974R2_ pipe. (Item #: 123842, Ref: 326699R1) $183.00

Manifold Gasket Set - This is a 6 piece Manifold Gasket Set. This Gasket Set (fits naturally aspirated diesels), models 2806, 2856, 806, 856. Replaces: 188275A1, 326523R1, 670848C1. (Item #: 179315, Ref: 326523R1) $49.90

Manifold Heat Control Spring - Used on Farmall and International models 560, 806, 2606, 2656, 2706, Hydro 70, 2756, 2806, 2826, Hydro 86, 460, 606, 656, 660, 666, 706, 756, 766, 826, 856, 686, this part replaces 82958R2, 82958R1 (Item #: 179404, Ref: 82958R2) $36.90

No
Picture
Muffler - Vertical muffler for gas tractors. Fits engines C263 and C301. Inlet inside diameter 2-15/16 inch, outlet outside diameter 3 inches, length 34 inches, diameter 6 inch round body. For tractor models 706, 2706, 806, 2806. Diesel engine D361 models 806, 2606. For 2606, 2706, 2806, 706, 806. (Item #: 100811, Ref: 384345R92) $57.00

Fuel System / Air Intake

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple International/Farmall models. Replaces: 383734R2, 625043C1. (Item #: 121925, Ref: T23262) $6.60

Choke Cable - For International / Farmall tractor models 460, 656 (LP), 766, 806, 856, 2806, 2856, Replaces International OEM number 374219R93, Overall Length:68-1/2", Mount to Mount: 65", (Item #: 113397) $23.20

Diesel Fuel Filter - Fuel filter element, cartridge type, final filter. For 2504, 2606, 2656, 2706, 2806, 330, 340, 460, 504, 560, 606, 656, 660, 706, 806. Replaces 610309C91 (Item #: 111124, Ref: 304101R91) $18.10

Foot Pedal Accelerator Kit - For International / Farmall tractor models 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM number 385573R11, 399229R1, 370278R1, 385576R1, 213-515, 358580R1, 385577R11, Contains; Cover [385573R11], Pedal [399229R1], Spring [370278R1], Rod [385576R1], Clevis [213-515], Stop [358580R1], Lever [385577R11], (Item #: 112220) $143.00

Fuel Filter - Used on international 50 (w/ C175 Engine), 400 (w/ C264 Engine), 404 (w/ C135 Engine), 450 (w/ C281 Engine), 504 (w/ C153 Engine), 606 (w/ C221 Engine), 650 (w/ C350), 656 (w/ C263 Engine), 660 (W/ C263), 706 (w/C291 Engine or C263 Engine), 756, 806 (w/ C301 Engine), 826 (or 856 w/ C301 Engine), 856 (w/ C301 Engine), 2404 (w/ C135 Engine), 2504 (w/ C153 Engine), 2606 (w/C221 Engine), 2706 (w/ C263 Engine), 2756 (w/C291 Engine), 2806, 2826, 2856 (w/ C 301 Engine). This filter measures O.D.: 1-7/8 inches (47.6mm), I.D.: 23/32 inches (18.3mm), Length: 2-15/32 inches (62.7mm) Replaces 64400-DC, 64400DC, PF224 (Item #: 126044) $17.90

Fuel Sending Unit - With Seal. For GAS tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, (2544 gas), 2656, 2706, 2756, 2806, 2826, 2856, (544 gas), 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86. NOT COMPATIBLE WITH ETHANOL BLENDS. Replaces: 5378427R1, 378427R92, 378427R93, 378427R94 (Item #: 107954, Ref: 378427R94) $43.00

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 13194D, 25854, 49923D (Item #: 105364, Ref: 49923D) $3.50

Upper Throttle Shaft With Nut - This Upper Throttle Shaft with nut is bare steel 11 inches long x 1/2 inch diameter. It has a 5/16 inch diameter on lock nut end and a 3/8 inch diameter on pin end. Fits 1026, 1206, 1256, [1456, 21456 (Diesel)], 21026, 21206, 21256, 2706, 2756, 2806, 2826, 2856, 706, 756, 806, 826, 856. Replaces: 382683R11, 404238R11. (Item #: 126766, Ref: 404238R11) $70.00

Gaskets

Seal and Bushing Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 21206, 21256, 21456, All TA Tractors, (Item #: 168459) $24.90

Gauges

Fuel Gauge - For tractor models 766, 966, 1066, 1466, 1468, 1566, 1568, 4366, 4386, 4568, 4586, Hydro 100.The 12 Volt Negative Ground fuel gauge is calibrated properly for 460, 560, and 660 with a Stewart Warner sending unit, but this fuel gauge has a different appearance. Gauge must be grounded to work properly. You will need to run an extra ground wire from the threaded clamp terminal to an existing bolt to attain a proper ground. 32-244 Ohm. Use with 378427R91 sending Unit. Replaces 533992R1 H142794. (Item #: 121190, Ref: 533992R1) $42.60

No
Picture
Fuel Gauge with Sending Unit - For International / Farmall tractor models Hydro 100, 460, 544, 560, 656, 660, 706, 756, 766, 806, 826, 856, 966, 1026, 1055, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4568, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 5378427R1, 533992R1, 378427R92, 378427R93, 378427R94, 378426R91, For replacement sending unit use Item #: 121190, (Item #: 135041) $81.00

Fuel Sending Unit - This fuel sending unit includes a seal. For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, (2544 gas), 2656, 2706, 2756, 2806, 2826, 2856, (544 gas), 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86. Compatible with Ethanol blend to 15%. 32-244 Ohm. Replaces: 5378427R1, 378427R92, 378427R93, 378427R94 (Item #: 107954, Ref: 378427R94EB) $43.00

Fuel Sending Unit - This Sending unit operates from 32 Ohm full to 244 Ohm empty. It will not work work with 0-70 Ohm fuel gauges. It is for 12 volt systems. Use with Stewart Warner Fuel Gauges like 533992R1. Replaces: 378427R91, 84203050 (Item #: 107954, Ref: 378427R91) $43.00

Instrument Gauge Cluster - For International / Farmall tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM number 382732R91, 382732R92, 382732R93, 382732R94, 396380R91, 396380R92, 396380R93, Includes Fuel Gauge, Temperature Gauge, (Item #: 115572) $129.00

No
Picture
Tachometer Cable - Overall Length 57.5 inches. For tractor Models: 2500A gas, 2706 gas, 2756 gas, 2806 gas, 2826 gas hydro, 2856 gas, Hydro 70 gas, Hydro 86 gas, 385 diesel, 484 diesel, 485 diesel, 544 gas, 573 diesel, 584 diesel, 585 diesel, 656 gas and diesel, 666 gas, 674 diesel, 684 diesel, 685 diesel, 686 gas, 706 gas, 756 gas, 766 gas, 784 diesel, 785 diesel, 806 gas, 826 gas hydro, 844 diesel, 856 gas, 885 diesel. (Item #: 111325, Ref: 1970820C1) $16.30

Tachometer Cable - Used on International models" Hydro 70, Hydro 86, Hydro 100, 666 (Gear Drive), 766, 786, 806, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1486, 2806, 2856, 3088, 3288, 3688, 4166, 4186, 4366, 21026, 21256, 21456. This cable measures 80 inches. 5/8 - 18 thres on one side, 7/8 - 18 thread on the opposite. Squared ends. Replaces International OEM nos 393328R93, 384845R92, 387916R91, 393328R92, 393328R91 (Item #: 107953) $27.40

Tachometer Drive Gear Assembly - This Tachometer Drive Gear Assembly has 13 Teeth and is 1.765 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368245R12, 368245R11, 178575H1 (Item #: 164574, Ref: 368245R11) $61.00

Tachometer Drive Housing Fitting - This Tachometer Drive Housing Fitting is 3/4 inch - 20 pipe thread to 7/8 inch - 18 thread, 1.407 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368246R1, 178309H1 (Item #: 164575, Ref: 368246R1) $24.85

Tachometer Gauge, Used - For International tractor models 706, 756, 766 (s/n 10934-earlier), 806, 826, 1206, 1256, 1456, 2706, 2756, 2806, 2856, 21206, Replaces International OEM number 103151A1, 103152A1, 388588R91, 388589R91, 398095R91, 66748C1, Black Face, IH Logo on Face, For a new version of this item use Item #: 121706, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 426978) $60.01

Tachometer Gauge - White Face - MPH - For International / Farmall tractor models 706, 756, 766 (s/n 10934-earlier), 806, 826, 1206, 1256, 1456, 2706, 2756, 2806, 2856, 21206, Replaces International OEM number 103151A1, 103152A1, 388588R91, 388589R91, 398095R91, 66748C1, White Face, MPH on Face, For tachometer gauge with white face and IH logo use Item #: 112544, (Item #: 126978) $87.00

Tachometer - With IH Logo - Tachometer assembly with BLACK face. Tractors: 706, (766, 966, 1066, Hydro 100 to serial number 10934), 806, 856, 1206, 1256, 1456, 2706, 2806, 21206. Black background with white lettering. (Item #: 388588R91-Logo) $103.50

Tachometer - Without IH Logo - Tachometer assembly with BLACK face. Tractors: 706, (766, 966, 1066, Hydro 100 to serial number 10934), 806, 856, 1206, 1256, 1456, 2706, 2806, 21206. Black background with white lettering. (Item #: 121706, Ref: 388588R91) $60.58

Hitch / Drawbar

Center Link Handle - Used on International Models: 21026, 21206, 2606, 2706, 2806, HYDRO 100, HYDRO 70, HYDRO 86, 100, 1026, 1066, 1206, 1256, 130, 140, 1466, 1468, 1566, 1568, 2504, 404, 504, 544, 606, 644, 656, 664, 666, 686, 706, 744, 756, 766, 806, 826, 844, 844S, 856, 966. This part replaces 392204R1 (Item #: 164316, Ref: 392204R1) $23.90

Drawbar Hammerstrap - For International / Farmall tractor models Hydro 100, Hydro 186, 560, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 6388, 6588, 6788, 21026, Replaces International OEM number 400297R1, Pin hole is 5-1/2" from bend in strap, For use with spacer 368514R1 (110041), (Item #: 110042) $192.87

Drawbar Hammerstrap Spacer - For International / Farmall tractor models Hydro 100, Hydro 186, 560, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 6388, 6588, 6788, 21026, Replaces International OEM number 368514R1, (Item #: 110041) $11.60

Drawbar Support, Front - For tractor models 1026, 21026, 2706, 2756, 2826, 2856, 706, 756, 826, 856, (766 SN# up to 13892), (966 SN# up to 27089), 806, 2806. (Item #: 172677, Ref: 381707R21) $297.00

Duckhead - This leveling screw pivot, also know has duckhead, fits 1 inch screw. For tractor models Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1466, 1468, 21026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966. (Item #: 172990, Ref: 383990R2) $105.00

Duckhead Pivot Assembly - Duckhead Pivot Assembly, 1 inch Screw Includes: duckhead, collar w/ set screws, hardened washer and weld on washer. Fits 1 inch Shaft. Contains 1 - 383990R2, 2 - HD78CUP, and 1 Set screw. (Item #: 122667, Ref: 223315) $69.00

Front Drawbar Support, Used - For International tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 2706, 2756, 2806, 2826, 2856, 21026, Replaces International OEM number 381707R21, For a new version of this item use Item #: 172677, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498377) $176.01

Front Stabilizer Eyebolt - Used with 382386R2 stabilizer control arm, this Eyebolt is used on International models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026. Replaces International OEM number 382390R1 (Item #: 108857, Ref: 382390R1) $33.70

Latch Spring, Lower - Used with 382192R1, 398373R1, and 398399R1 Latches, this part is used on three point hitches on the following models: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21256, 21456. Replaces 382192R1 (Item #: 109644, Ref: 382192R1) $11.20

Latch Spring, Upper - Used with 382192R1, 398373R1, and 398399R1 Latches, this part is used on three point hitches on the following models: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21256, 21456. Replaces 382193R1 (Item #: 108835, Ref: 382193R1) $11.10

Lift Arm Latch, Used - For International tractor models Cub Lo-Boy, 100, 130, 140, 504, 544, 606, 656, 666, 706, 756, 766, 806, 826, 856, 966, 1026, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 21026, Replaces International OEM number 393500R1, 523110R1, 523110R2, 517786R1, 517786R11, Use with Lower Spring - 128306 and Upper Spring -128305, Fits On Fast hitch 2pt. Lift Arm, For a new version of this item use Item #: 110394, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410394) $17.01

No
Picture
Lower Latch Spring - Used with 393500R1 latch. Replaces OEM part number 522840RA. For tractor models 21026, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Cub, Cub Lo-Boy, Hydro 100, Hydro 70, Hydro 86, 100, 1026, 1206, 130. (Item #: 128306, Ref: 522840R2) $9.50

Lower Lift Arm End, Left - For Category II lower pull arms on models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, this part replaces 398371R11, 382189R11 (Item #: 110392, Ref: 398371R11) $66.00

Lower Lift Arm End, Right - For Category II lower pull arms on models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, this part replaces 398372R11, 382188R11 (Item #: 110190, Ref: 398372R11) $74.00

Lower Link Latch, Used - For International tractor models 706, 806, 2706, 2806, Replaces International OEM nos 382191R1, 382191R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430455) $41.01

Lower Link Pin Retainer, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21456, Replaces International OEM nos 406687R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453564) $9.01

Stabilizer Control Arm - For tractor models (21026, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 706, 756, 766, 786, 806, 826, 886, 966, 986, Hydro 100, Hydro 186 all for Cat II 3 point hitch). (Item #: 109573, Ref: 382386R2) $238.00

Torsion Spring Bar, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, Replaces International OEM nos 393243R1, 381925R1, Cat II Hitch, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430235) $147.01

Hydraulic System

Auxiliary Valve Inner Handle Base - This Auxiliary Valve Inner Handle Base is for models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, (Farmall 2706 serial number 19250 and up, IH serial number 3000 and up), 2756, (Farmall 2806 serial number 14500 and up, IH serial number 3400 and up), 2826, 2856, (Farmall 706 serial number 19250 and up, IH serial number 3000 and up), 756, 766, (Farmall 806 serial number 14500 and up, IH serial number 3400 and up), 826, 856, 966, Hydro 100. (Item #: 163551, Ref: 389164R12) $158.00

Control Lever Tube, Support Assembly - For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1566, 1568, 21026, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 706, 756, 766, 806, 826, 856, 966, Hydro 100. (Item #: 160847, Ref: 384111R91) $124.00

Hitch Pump Drive Gear - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21206, 21256, 21456, Replaces International OEM number 133404C1, 23 Teeth, 20 Degree, (Item #: 113421) $113.00

Hitch Pump Drive Gear, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21206, 21256, 21456, Replaces International OEM number 133404C1, 382754R2, 23 Teeth, 20 Degree, For a new version of this item use Item #: 113421, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 413421) $35.01

Hydraulic Pump - For International / Farmall tractor models Hydro 186, 664, 666 (need gasket and O-ring), 686 (need gasket and O-ring), 706, 756, 766, 786, 806, 826, 856, 886, 966 (need gasket and O-ring), 986 (s/n 24000-earlier, 28000-later), 1026, 1066, 1086 (s/n 47999-earlier, 55000-later), 1206, 1256, 1456, 1466, 1468, 1486 (s/n 26000-earlier, 29150-later), 1566, 1568, 1586 (s/n 21000-earlier), 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388 (need conversion kit), 3588 (need conversion kit), 3688, 3788 (need conversion kit), 6388 (need conversion kit), 6588 (need conversion kit), 6788 (need conversion kit), 21026, 21206, 21256, 21456, Replaces International OEM number 1949300C1, 70932C91, Main Hitch Hydraulic Pump, Open back to accept piggy-back pump, Backplate and gasket not included, 15 GPM, Max PSI: 2100-2500, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Pump Conversion Kit when needed use Item #: 111636, (Item #: 155066) $530.00

Hydraulic Pump - Pump is open back type to use with piggy-back pump, 17 GPM rating, max PSI of 2250. Not for use in 12 GPM systems. If system is 12 GPM, use 1949296C1. For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Hydro 100. Hydraulic Pump is 17 GPM. (Item #: 104237, Ref: 70935C91) $370.00

Hydraulic Pump - 100, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026 Indust/Const, 21206 Indust/Const, 21256 Indust/Const, 21456 Indust/Const, 2706 Indust/Const, 2756 Indust/Const, 2806 Indust/Const, 2826 Indust/Const, 2856 Indust/Const, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, C263 Eng, C291 Eng, C301 Eng, C310 Eng, D282 Eng, D310 Eng, D358 Eng, D360 Eng, D361 Eng, D407 Eng, Hydro 186. Pump is closed back type, 15 gpm rating, 2250 maximum pressure. Replaces 70932C91. (Item #: 104336, Ref: 70932C91) $380.00

Hydraulic Pump Drive Gear - Used on Farmall / IH models: 706, 756 (serial number Farmall 17635-earlier, International 8424-earlier), 856 (serial nuber Farmall 27286-earlier, International 9492-earlier), 1206, 1256, 2706, 2756 (serial number Farmall 17635-earlier, International 8424-earlier), 2806, 2856 (serial number Farmall 27286-earlier, International 9492-earlier), 4100, 21206, 21256. This Gear has 19 teeth and 20 degree pitch to the teeth. Replaces 382332, 382332R1 (Item #: 173027, Ref: 382332R1) $150.00

Hydraulic Pump Drive Gear - For 706, Farmall 756 up to serial number 17635, International 756 up to serial number 8424, 806, Farmall 856 up to serial number 27286, International 2856 up to serial number 9492, 1206, 1256, 2706, Farmall 2756 up to serial number 17635, International 2756 up to serial number 8424, 2806, Farmall 2856 up to serial number 27286, International 2856 up to serial number 9492, 4100, 21206, 21256. Hydraulic Pump Drive Gear with 20 degree tooth angle. (3180R) (Item #: 173027, Ref: 382332) $150.00

No
Picture
Hydraulic Pump Kit - For International / Farmall tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 4166, 21026, 21206, 21256, 21456, Replaces International OEM number 1949304C1, 382330R91, 382330R92, 391353R92, 527397R91, 527397R92, 527397R93, 64801C91, 393877, 384443R92, 9 GPM, Max Pressure: 2100, Kit Includes: MCV hydraulic pump, MCV gasket kit, and KCV relief valve, (Item #: 176736) $700.00

MCV Gasket Set - Used on 706, 756, 786, 806, 826, 856, 886, 986, 1086, 1206, 1256, 1456, 1486, 2706, 2756, 2806, 2826, 2856, 4156, 21206, 21256, 21456 this gasket set is used in repairing Multiple Control Valves. This part replaces IH part numbers 393877R93, 393877 (Item #: 114588, Ref: 393877R93) $70.00

MCV Spring Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1486, 1566, 2706, 2806, 2856, 3088, 3388, 3588, 3688, 6388, 6588, 21256, 21456, (Item #: 168439) $52.00

Multiple Control Valve, Used - For International tractor models 706 (International s/n 501-4892, Farmall s/n 501-19074), 806 (International s/n 501-4892, Farmall s/n 501-19074), 2706, 2806, Replaces International OEM nos 391948R93, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438863) $270.01

Power Beyond Block Control End Cover - Used on 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 21206, 21456 for Power Beyond (Remote Hydraulics). This part replaces 391673R1, 391673R1, 398315R91. Port size is 7/8-14 NF Right Hand. (Item #: 112516, Ref: 398316R1) $481.00

Remote Valve Assembly, Used - For International tractor models Hydro 70, Hydro 86, 404, 504, 544, 606 (s/n 6754-later), 656, 664, 666, 686, 706, 756, 806, 826, 856, 1206, 1256, 2404, 2504, 2544, 2606 (s/n 6754-later), 2656, 2706, 2756, 2806, 2826, 2856, 4100, 21206, 21256, Replaces International OEM nos 390826R94, 390826R91, 390826R92, 390826R93, Open on 1 side only, 1500 psi to 2000 psi, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496748) $349.01

Selector Valve Drive Stem - For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2706, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986. (Item #: 172678, Ref: 382319R1) $48.00

Valve Spool Actuator, Used - For International tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21456, Replaces International OEM number 384112R11, For a new version of this item use Item #: 163550, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436340) $20.01

Lights

Headlight Washer - Used with light part number 164089AS. Replaces 388947R1. For the following tractors: 806, 1066, 2606, 2706, 2756, 2806, 2826, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 786, 886, 986, 1086, 1486, 1586, 21456, 21256, 21206 (Item #: 154899, Ref: 504781M1) $5.30

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Item #: 111241, Ref: 373662R91) $9.10

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $18.50

Miscellaneous

No
Picture
Control Quadrant, Used - For International tractor models 706, 756, 806, 826, 856, 1206, 1256, 1456, 2706, 2756, 2806, 2826, 2856, 21206, 21256, 21456, Replaces International OEM nos 399384R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443010) $73.01

Draft Quadrant Support, Used - For International tractor models 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM nos 382792R11, Replaces Casting nos 382792R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436660) $55.01

Hitch Pump O-Ring - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1568, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21206, 21256, 21456, Replaces International OEM number 386867R1, 238-6122, (Item #: 164019) $3.90

Hydraulic Pump Cover, Used - For International tractor models 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM nos 387348R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433086) $176.01

Hydraulic Pump Drive Gear, Used - For International tractor models 706, 756 (s/n Farmall 17635-earlier, International 8424-earlier), 856 (s/n Farmall 27286-earlier, International 9492-earlier), 1206, 1256, 2706, 2756 (s/n Farmall 17635-earlier, International 8424-earlier), 2806, 2856 (s/n Farmall 27286-earlier, International 9492-earlier), 4100, 21206, 21256, Replaces International OEM number 382332R1, Teeth; 19, Teeth Pitch: 20 degrees, For a new version of this item use Item #: 173027, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430256) $55.01

No
Picture
Hydraulic Pump Lock Nut - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21206, 21256, 21456, Replaces International OEM number 18536R1, (Item #: 176725) $4.80

Hydraulic Pump Mounting Gasket - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21206, 21256, 21456, Replaces International OEM number 382244R5, (Item #: 156515) $7.10

No
Picture
Hydraulic Pump O-Ring - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21206, 21256, 21456, Outside Diameter: 1.125", (Item #: 176733) $2.00

No
Picture
Intake Out Spring - For tractor models 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2806, 2856, 806, 815, 856, 915. (Item #: 167159, Ref: 62265VA) $9.50

MCV Relief Valve - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2856, 3088, 3288, 3488, 3688, 4100, 4156, 4166, 4186, 5088, 5288, 5488, 21206, 21256, 21456, Replaces International OEM number 384443R92, 384443R91, (Item #: 154335) $137.00

O-Ring, Hydraulic - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 2756, 2806, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21256, Replaces International OEM number 346959R1, 511524, (Item #: 153568) $0.50

Park Pawl, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM number 139141C1, 384094R2, For a new version of this item use Item #: 113420, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 413420) $100.01

Pilot Relief Valve - For International / Farmall tractor models Hydro 100, 454, 574, 656, 766, 806, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 2400A, 2500A, 2656, 2806, 2856, 4100, 4156, 4166, 4186, 21026, 21206, 21256, 21456, Replaces International OEM number 388208R93, 388208R91, 388208R92, 2000 psi, (Item #: 154338) $175.00

Selective Shift Handle, Used - For International tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM nos 382502R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435044) $46.01

No
Picture
Shift Cover - Outer, Used - For International tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM nos 383103R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438416) $68.01

No
Picture
Speed Transmission Control Arm Kit, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 382565R21, 380115R2, 383997R1, Includes control arm, roller and spring, For a new version of this item use Item #: 113499, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435622) $22.26

Torque Amplifier Carrier, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, Replaces International OEM nos 380235R11, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435057) $176.01

No
Picture
Torque Amplifier Pressure Isolator - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 21256, 21456, Used to isolate torque amplifier pressures between the torque amplifier circuit and the MCV circuit, Installation: (1) Remove selector spool nut and spool, (2) install isolating rod (threaded end up) and nut, Diagnostic: With isolator installed start tractor and read lube pressure. (1) Lube pressure comes up to normal operating pressure (a leak in the torque is robbing lube oil), (2) Problem with the lube oil still exists (problem is in lube circuit or MCV or TA), (Item #: 176779) $55.00

Oil System

Oil Cooler Header, Used - For International tractor models 806, 1206, 2806, 21206, Compatible with International Engine(s) D361, DT361, D407, DT407, Replaces International OEM nos 607254C2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434269) $66.01

Oil Filter - Oil filter element, cartridge type with gasket. For gas engines: C221, C263, C291, C301. For diesel engines: D166, D188, D236, D282, D and DT 361, D and DT407. For 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 330, 340, 460, 504, 560, 606, 656, 660, 706, 756, 806, 815, 826, 856, 915. Also replaces 279994R91. (Item #: 111127, Ref: 323827R91) $12.70

Oil Filter Adapter Kit - This Spin-On Engine Oil Filter Adapter Kit fits International Tractors; 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2806, 2856, 806, 856 all when using a D361, DT361, D407 or DT407 diesel engine. Fits various other International machines where D361, DT361, D407 or DT407 diesel engines are used. This filter adapter kit contains (2) aluminum adapter bases, (2) mounting studs, (2) internal O-Rings, (2) square cut external O-Rings, (2) Case-IH spin-on filters, (1) instruction sheet. No drilling is required. Uses Replacement filters 298080R2. (Item #: 182591, Ref: 361407) $218.00

Oil Filter Case Assembly, Used - For International tractor models 806, 1206, 2806, 21206, Compatible with International Engine(s) D361, DT361, D407, DT407, Replaces International OEM nos 349077R91, Includes Filter case, Retaining Bolt, and Bypass Valve Assembly, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433527) $89.01

No
Picture
Oil Filter Head with Plug, Used - For International tractor models 806, 1206, 2806, 21206, Compatible with International Engine(s) D361, DT361, D407, DT407, Replaces International OEM nos 607266C11, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434271) $66.01

Oil Inlet Tube, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM nos 382353R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444173) $12.01

Oil Pump Assembly - This complete oil pump assembly comes as picture and is for tractor models 606, 2606, 560 engine serial number 32243 and up, 656, 660 engine serial number 32243 and up, 706, 2656, 2706, Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706, 2756, 806, 826, 856, 2806, 2826, 2856, 3309, 340, 560 engine serial number 42218 and up, 660 engine serial number 42218 and up, 706 engine serial number 51721 and below, 2706 engine serial number 51721 and below. FOR THE FOLLOWING ENGINES ONLY: C221, C263, C282, C291, C301, UB220, UB240 gas and LP engines and BD220, BD240, D166, D188, D236, D282, D301 diesel engines. Does not include pick-up screen. Replaces 230421R91, 308366R91, 379138R1, 379138R91. (Item #: 121773, Ref: 379138R91) $279.00

PTO / Driveline

Gear, IPTO Driven - This Gear is used on some: 21026, 2706, 2756, 2806, 2826, 2856, HYDRO 100, HYDRO 186, 1026, 1066, 1086, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 6388, 706, 7110, 7120, 756, 766, 786, 806, 826, 856, 886, 966, 986 (Item #: 118606, Ref: 381506R1) $266.00

Gear, PTO Idler - This PTO Idler Gear is used on 21026, 2706, 2756, 2806, 2826, 2856, HYDRO 100, HYDRO 186, 1026, 1066, 1086, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 6388, 706, 7110, 7120, 756, 766, 786, 806, 826, 856, 886, 966, 986. (Item #: 115441, Ref: 381509R1) $157.00

Independant PTO Bearing Cage - For tractor models (Hydro 100, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 21206, 21256, 21456 all with torque amplifier). (Item #: 123110, Ref: 380101R2) $123.00

Independent PTO Idler Gear Bearing - This Needle Bearing is used on IPTO systems on 21026, 2706, 2756, 2806, 2826, 2856, HYDRO 100, HYDRO 186, MX80C, MX90C, 1026, 1066, 1086, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 6388, 706, 7110, 7120, 7210, 7230, 756, 766, 786, 806, 826, 856, 886, 966, 986. Replaces K620047, F9706, C10300, 287057R91, 128876A1, 12-1676, 531437R91, 285057R91, T15025 (Item #: 116993, Ref: 833083M1) $23.26

Independent PTO Idler Shaft - This Independent Idler Shaft is used on 21026, 2706, 2756, 2806, 2826, 2856, HYDRO 100, HYDRO 186, 1026, 1066, 1086, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 6388, 706, 7110, 7120, 756, 766, 786, 806, 826, 856, 886, 966, 986. Replaces 381507R1 (Item #: 118605, Ref: 381507R1) $37.20

No
Picture
IPTO Valve Housing, Remanufactured, 381462R21 - For International / Farmall tractor models Hydro 100, Hydro 186 (s/n 12000-earlier), 706, 756, 766, 806, 826, 856, 886 (s/n 17000-earlier), 956 (s/n 24000-earlier), 966, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (s/n 26000-earlier), 2706, 2756, 2806, 2826, 2856, 3388 (s/n 10385-earlier), 21026, 21206, 21256, 21456, Replaces International OEM number 381462R21, All Models with Spring Loaded Anti-Creep Brakes, (Item #: 210544) $430.01

No
Picture
PTO Arm, Used - For International tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM nos 385517R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438538) $41.01

PTo Disc - This PTO Clutch Disc has an inside diameter of 4 inches (102mm) with 51 teeth, outside diameter of 5 5/16 inches (135mm) Replaces 381490, 381490R4, 111357, 1277392C1, 1712-4422, 17124422, 1997688C1, 381490, 381490R3, 381490R4 (Item #: 111357, Ref: 381490R1) $6.40

PTO Drive Gear, Used - For International tractor models 706, 806, 2706, 2806, Replaces International OEM nos 380262R1, Teeth: 58, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498373) $117.01

PTO Driven Gear, Used - For International tractor models 706 (Farmall s/n 26385-later, International s/n 4232-later), 756 (Farmall s/n 17635-earlier, International s/n 8424-earlier), 806 (Farmall s/n 19710-later, International s/n 4954-later), 856 (Farmall s/n 27286-earlier, International s/n 9492-earlier), 1206, 1256, 2706 (Farmall s/n 26385-later, Intenational s/n 4232-later), 2756 (Farmall s/n 17635-earlier, International s/n 8424-earlier), 2806 (Farmall s/n 19710-later, International s/n 4954-later), 2806 (Farmall s/n 27286-earlier, International s/n 9492-earlier), 4100, 21206, 21256, Replaces International OEM nos 391828R1, Teeth: 58, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430761) $210.01

PTO Drive Shaft Bearing Cage - For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1486, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 706, 756, 766, 786, 806, 826, 856, 966, 986, Hydro 100. (Item #: 172679, Ref: 384079R2) $202.00

PTO Drive Shaft Bearing Cage, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1206, 1256, 1456, 1466, 1468, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 384079R2, For a new version of this item use Item #: 172679, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436642) $109.01

PTO Drive Shaft Bearing Retainer, Used - For International tractor models Hydro 100, 706, 756, 766 (s/n 11780-earlier), 806, 826, 856, 966 (s/n 17001-20613), 1066 (s/n 30176-earlier), 1206, 1256, 1456, 1466 (s/n 18131-earlier), 1468 (s/n 9546-earlier), 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166 (s/n 11099-earlier), 4186 (s/n 11099-earlier), 21206, 21256, 21456, Replaces International OEM nos 380107R1, Use with Independent Gears: 528677R1, 67594C1 and 68512C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435045) $36.01

PTO Housing Cover - This PTO housing cover is used on Dual Speed PTO Tractors. It is used with 120985C1 1000 RPM Shafts and 393111R2 540 RPM PTO Shafts. Seal and gasket kit is available as part number 77720C94 or 77721C91 (also includes brake components. Replaces 64785C91 (Item #: 109390, Ref: 64785C92) $544.00

PTO Input Shaft, Used - For International tractor models 706, 806, 2706, 2806, Replaces International OEM nos 381495R1, Uses #5 Woodruff Key 1/8" X 5/8", ****Check Your Keyway Size Before Ordering****, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441438) $291.01

PTO Input Shaft, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3388, 21026, 21206, 21256, 21456, Replaces International OEM nos 389529R1, Spline: 12 and 51, Uses #91 Woodruff Key 1/4" X 3/4", ****Check Your Keyway Size Before Ordering****, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497525) $291.01

PTO Plate - Measures 4.070 inches inside diameter, 5.300 inches outside diameter. Replaces 381489R3, 1277392C1, 1997688C1 (Item #: 111358, Ref: 381489R3) $4.30

PTO Shaft, 540 RPM - 13 tooth front splines, 10.815 inch long. For tractor models (706, 806, 826, Hydro 100, Hydro 186, 1026 all from 1962 with single speed PTO), (756, 766, 786, 856, 886, 966, 986, 1066, 1086 all from 1962 with single or dual speed PTO), 1206, 1468, 2706, 2806, 2826, 21206, 21026, (1256, 1456, 1466, 1486, 2756, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, 21256, 21456 all with dual speed PTO). Replaces 393111R2, 393111R1 (Item #: 107272, Ref: 393111R2) $98.00

PTO Shaft, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3688, 6388, 21026, 21206, 21256, 21456, Replaces International OEM number 393111R1, 393111R2, 10.815" Long, Dual Speed PTO, For a new version of this item use Item #: 107272, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 407272) $57.01

PTO Shield - Two Piece For 06 Series thru 86 Series with Dual Speed PTO. OEM# 1264520C1 1264503C1 (Item #: 103968, Ref: R0907) $57.00

Seats

Lower Back Seat Bracket Set, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 544, 574, 606 (With Vertical Action), 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (With Vertical Action), 1206, 1256, 1456, 1466 (With Vertical Action), 1468 (With Vertical Action), 1566, 1568, 1586, 2656, 2706 (s/n 3000-later), 2756, 2806, 2826, 2856, 4156, 4166, 21026, 21206, 21256, 21456, Compatible with International Combine(s) 715, 815, 915, Compatible with International Hay Cutting(s) 375, Compatible with International Rake / Tedder(s) 100, Replaces International OEM number 387172R1, 387173R1, Includes 2 Brackets, For a new version of this item use Item #: 112241, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 412241) $24.76

Seat Assembly - Black and white vinyl on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 101273, Ref: R1139) $602.87

Seat Assembly - Black vinyl on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 178440, Ref: R1140) $924.00

Seat Assembly - Black fabric on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 182099, Ref: R1141) $829.00

No
Picture
Seat Assembly - Red fabric on steel. For tractor models 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 100. (Item #: 180720, Ref: R1142) $890.00

Seat Back - Black and White Vinyl on Steel For 404, 504, 606, 706, 806, 2404, 2504, 2606, 2706, 2806 with Fiberglass Frame (Item #: 182096, Ref: R1138) $143.00

Seat Back - Black and white vinyl on steel with original style pleated covering. For 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 127287, Ref: R3662) $207.00

No
Picture
Seat Back - Black and white vinyl on wood. For 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 178317, Ref: R0987) $118.00

No
Picture
Seat Bottom - Black and white vinyl on steel with original style pleated covering. For 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 178307, Ref: R3661) $347.00

No
Picture
Seat Bottom - Black vinyl on steel. For 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 127283, Ref: R0868) $163.00

No
Picture
Seat Cushion Set - 3 Piece, Vinyl, White/Black - Black & White Vinyl Steel Core. Seat 4" Cushion. Backrest 2" Cushion. Wrap around backrest 2" cushion. Vertical Action. Hardware not included. Compatible with International Tractor(s) Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156 (4WD), 4166 (4WD), 4186 (4WD) (Item #: 113002) $195.00

$Farmall 2806 Seat Cushion Set - 3 Piece, Vinyl, White\Black$
Seat Cushion Set - 3 Piece, Vinyl, White/Black - Black & White Vinyl Steel Core. Seat 4" Cushion. Backrest 2" Cushion. Wrap around backrest 2" cushion. Vertical Action. Hardware not included. Compatible with International Tractor(s) Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156 (4WD), 4166 (4WD), 4186 (4WD) (Item #: 113002) $195.00

Seat, Shock Absorber - For tractor models 460, 504, 544, 560, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, 2504, 2544, 2706, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 414 Cotton Picker, 420 Cotton Picker. Replaces 372751R91, IHS646. (Item #: 105342, Ref: 400072) $54.00

No
Picture
Seat Upper Back - Black and white vinyl on steel with original style pleated covering. For tractor models 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 178315, Ref: R3663) $157.00

No
Picture
Seat Upper Back - Black vinyl on steel. For tractor models 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 112547, Ref: R0870) $72.00

Sheet Metal / Body Parts

Front Hang-On Weight Bracket - This is a 10 hole bracket. There is 16 inch from center-to-center bolt holes. The overall length is 23-3/8 inch. For utility applications, must have existing 66253C1 cast bumper weight to bolt this to. Hydro 70, Hydro 84, Hydro 86, 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2424, 2444, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 385, 404, 424, 444, 460, 504, 544, 560, 656, 660, 664, 666, 686, 706, 756, 806, 826, 856, Following 2 wheel drive only: 784, 884, Following when equipped with 66253C1 cast bumper weight: 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500, 2500A, 2500B, 2505B, 2510B, 2514B, 454, 464, 484, 574, 584, 674, 684, will also fit the following models when using (2) 536041R1 spacers: 1066, 1466, 1468, 1566, 1568, 766, 966, Hydro 100. Replaces: 383389R11, 383389R21 (Item #: 152230, Ref: 383389R11) $225.00

Front Hood Access Cover - LH, RH, Used - For International tractor models 544, 656, 664, 706, 806, 2544, 2656, 2706, 2806, Replaces International OEM nos 378627R1, Fits Right Hand or Left Hand Side, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498359) $35.01

No
Picture
Grab Handle - Right Hand - For International / Farmall tractor models Hydro 100, 706, 806, 826 (with Hydro drive), 966 (with Hydro drive), 1026 (with Hydro drive), 1066 (with Hydro drive), 1206, 2706, 2806, 21026 (with Hydro drive), 21206, Replaces International OEM number 394820R2, 394820R1, Fits Right Hand Side, For Left Hand Side use Item #: 121834, (Item #: 121835) $45.00

No
Picture
Lower Steering Support Panel, LH, Used - For International tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM number 389907R1, Left Hand, For Right Hand use Item #: 434495, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435907) $71.01

Rear Hood Side Panel, LH, Used - For International tractor models 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM number 378638R1, Left Hand, For Tractors with Side Headlights, For Right Hand use Item #: 435055, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435056) $49.01

Rear Hood Side Panel, LH, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM nos 378670R1, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434915) $55.01

No
Picture
Rear Hood Side Panel, RH, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM nos 378671R1, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434916) $55.01

Rear Hood Side Panel, RH, Used - For International tractor models 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM number 378639R1, Right Hand, For Tractors with Side Headlights, For Left Hand use Item #: 435056, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435055) $49.01

Step Assembly - Left Hand - Used on Hydro 100, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2756, 2806, 2826, 2856, 21206, 21256, 21456, this is a Left Hand Step Assembly. Replaces 395230R1. For the Right side, order 103855. This part comes with a primer coating. Color may vary. (Item #: 103854) $74.00

Step Assembly - Right Hand - Used on Hydro 100, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2756, 2806, 2826, 2856, 21206, 21256, 21456, this is a Left Hand Step Assembly. Replaces 395123R1, 23977DB, 23977DD, 23977DC. For the Left side, order 103854. This part comes with a primer coating. Color may vary. (Item #: 103855) $85.11

Step - LH - For tractor models 756, 766, 806, 856, 826, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566, 1568, 2806, 2826, 2856. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103854, Ref: 395230R1) $74.00

Weight Bracket, Used - For International tractor models 806, 1206, 1456, 2806, 21206, 21456, Replaces International OEM number 394447R11, 66 Series Tractors (if 2 spacers 536041R1 are used), Large Steel Weight Bracket, Holds 12 Weights, For front weight bracket spacer use Item #: 497996, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499316) $300.01

Steering

Axle Clamp, Front, Used - For International tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, M, MD, MTA, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 2544, 2706, 2806, 2826, 2856, 21026, 21206, 21256, Replaces International OEM nos 350556R1, Front Axle Clamp, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434540) $31.01

Ring Gear And Pinion Set, Used - For International tractor models 766 (Diesel), 826, 856, 966, 1026, 1066 (Hydro), 2806, 2826, Replaces International OEM nos 388916R1, 395828R91, 395013R1, Consist of Ring Gear 388916R1 and Pinion Shaft 395013R1, 12 and 49 teeth, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499944) $385.01

Shim Stay Rod Cap - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 21026, 21256, 21456, Replaces International OEM number 379954R1, (Item #: 111253) $4.00

No
Picture
Spindle Jam Nut - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2404, 2424, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 5088, 5288, 5488, 21026, 21206, 21256, 21456, Replaces International OEM number 427546, 1-3/8"-12, (Item #: 100852) $4.00

Stay Rod Cap, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3688, 21026, 21206, 21256, 21456, Replaces International OEM number 379953R1, 2 Bolt, For a new version of this item use Item #: 110265, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410265) $8.51

Steering Hand Pump Assembly, Used - For International tractor models 706, 806, 1256, 1456, 2706, 2806, 21256, 21456, Replaces International OEM nos 382579R92, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438854) $360.01

No
Picture
Steering Pilot Valve, Used - For International tractor models 504, 606, 656, 706, 806, 1206, 2504, 2606, 2656, 2706, 2806, Compatible with International Combine(s) 403, Compatible with International Hay Cutting(s) 375, Replaces International OEM nos 379645R93, 379645R91, 379645R92, 534502R91, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438492) $153.01

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $8.00

No
Picture
Tie Rod End, Inner - Left Hand - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 384005R91, 3.75" Long, 1" Diameter, 16 Left Hand Thread, (Item #: 100873) $14.10

Wheels

Bearing Cone - Bearing cone. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2504, 2544, 2606, 2608, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 460, 504, 5088. (Item #: 111288, Ref: 619386R91) $12.50

Front Wheel Bearing - Bearing kit for front wheel, contains inner cone, inner cup, outer cone, outer cup, oil seal. For tractors: 1026, 1066, 1086, 1206, 1246, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 2504, 2606 HD Front Axle, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 5088, 5288, 5488, 544, 5488, 460 hi clear, 560, 606, 656, 666, 685, 686, 706, 756, 754, 766, 786, 806, 826, 856, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86 (Item #: 100856, Ref: FW120FS) $34.50

Front Wheel Bearing Kit - Bearing kit, for front wheel, Contains Bearing LM603049-BP 1.781 inches ID, Bearing Cup LM603011-BP 3.062 inches OD, Bearing LM48548-BP 1.375 inches ID, Bearing Cup LM48510-BP 2.562 inches OD, Wear Sleeve 48703D-BP Hub Cap Gasket 369860R1 Lip Type Seal 22322-BP 2.250 inches ID, 3.250 inches OD. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2544, 2608, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488. (Item #: 100856, Ref: 371418R91) $34.50

Front Wheel Hub, 8 Bolt - For tractor models 1026, 766, 966, 1066, 1466, 754, 2756, 826, 2826, 856, 2856, 1586, 786, 886, 986, 1086, 1486, 1566, 1568, 3088, 3288, 3688, 5088, 5288, 5488, 666, 815, 1206, 1246, 1468, 706, 2706, 806, 2806, 685, 915. Replaces 1323559C1. Uses FW120FS bearing kit, not included. (Item #: 100878, Ref: 391824R11) $100.00

Rear Wheel Hub Clamp, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4366, 4386, 6388, 6588, 6788, 21026, 21206, 21256, Replaces International OEM nos 68806C1, Replaces International Casting nos 380863R2, Does not include bolts, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496993) $79.01

Rim Clamp Fixed, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 21026, 21206, 21256, 21456, Replaces International OEM nos 397251R1, 380871R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499564) $10.01

Rim Clamp, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 21026, 21206, 21256, Replaces International OEM number 380870R1, For a new version of this item use Item #: 157781, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499563) $10.01

No
Picture
Torque Amplifier Shaft Oil Slinger - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 21256, 21456, Replaces International OEM number 8301011, This oil slinger will help to reduce clutch failures caused by the TA leaking into the clutch housing that is common with tractors that continue to operate with well-worn Torque Amplifiers, The slinger is installed on the TA shaft in front of the TA bushing and helps deflect excess oil coming out of the TA away from the PTO gear seal, (Item #: 176790) $35.90

Wheel Hub, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 504, 544, 560, 606, 656, 656U, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 5088, 5288, 5488, 21026, 21206, 21256, 21456, Compatible with International Combine(s) 815, 915, Compatible with International Harvester(s) 782, 1400, Replaces International OEM number 391823R11, HH391823, Replaces International Casting nos 370256R2, Casting No 370256R2, 6 bolt, For a new version of this item use Item #: 100877, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400877) $41.01

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.80

Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $17.40

Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.40

Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $5.00

Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.90

Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.80

Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $30.50

Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $36.60

Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.60

Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.90

Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $5.00

Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $14.20

Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.50

Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.60

Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.40

Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.80

Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $14.20

Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $25.50

International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.40

International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.40

International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.60

International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.80

International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $14.00

International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $10.50

International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $17.50

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $19.20

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.20

$Farmall 2806 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $25.00

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Farmall 2806 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Farmall 2806 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Farmall 2806 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Farmall 2806 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Farmall 2806 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Farmall 2806 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.00

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $30.10

$Farmall 2806 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Gauges

No
Picture
Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837) $30.00

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB) $49.57

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $364.00

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $364.00

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $439.00

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $439.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112414, Ref: 45640DB-12V) $43.10

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112415, Ref: 45640DB) $42.80

Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Item #: 111227, Ref: 373661R91) $13.50

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

No
Picture
Sealed Beam Light - 6 Volt (Item #: 111938, Ref: R2712) $46.30

No
Picture
Sealed Beam Light - 12 Volt (Item #: 122080, Ref: R2713) $36.00

Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $389.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $123.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Farmall Red, 1 Gallon - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101108, Ref: TP110GAL) $55.00

No
Picture
Paint, Farmall Red, 1 Quart - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101107, Ref: TP110QT) $24.60

No
Picture
Paint, Farmall Red, Spray Can - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP110SP) $8.50

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, IH Blue, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101114, Ref: TP910GAL) $58.00

No
Picture
Paint, IH Blue, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101113, Ref: TP910QT) $24.00

No
Picture
Paint, IH Blue, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101112, Ref: TP910SP) $8.60

No
Picture
Paint, IH Red, 1 Gallon - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100722, Ref: TP905GAL) $56.00

No
Picture
Paint, IH Red, 1 Quart - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100721, Ref: TP905QT) $24.00

No
Picture
Paint, IH Red, Spray Can - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP905SP) $8.50

No
Picture
Paint, McCormick Deering Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108401, Ref: TP450GAL) $90.00

No
Picture
Paint, McCormick Deering Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108400, Ref: TP450QT) $35.00

No
Picture
Paint, McCormick Deering Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108399, Ref: TP450SP) $11.00

No
Picture
Paint, Off White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101117, Ref: TP900GAL) $62.00

No
Picture
Paint, Off White, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101116, Ref: TP900QT) $24.90

No
Picture
Paint, Off White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101115, Ref: TP900SP) $8.20

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Universal Non Glare Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP120QT) $24.00

No
Picture
Paint, Universal, Non Glare Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP120SP) $8.50

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.01

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Grey and Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only. (Item #: 178995, Ref: R2599) $43.80

Tie-On Seat Cover - Red and White, 21" wide. Deluxe with 2 inches of foam. (Item #: 178155, Ref: R1015) $38.60

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $173.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 364343R92 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $78.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. (Item #: 183819, Ref: WHS064) $82.00