Welcome! Please use the navigational links to explore our website.
FREE SHIPPING on orders above $249.99!
Details
All Manufacturers
All Models
(800) 853-2651
Tractor Parts
Engine Kits
Carburetors
Salvage
Manuals
DVDs
Hats
Contact Us
Shipping Rates
Return Policy
Ordering Help
Company Info
Parts Warranty
Forums
Store
>
Tractor Parts
>
Farmall
International Harvester / Farmall 2444 Tractor Parts
[
Categories
] [
All Farmall Models
] [
Print
]
Brakes
Bonded Lined Brake Disc
- This bonded lined brake disc fits the following tractor models: 354, 364, 384, 424, 444, 2300, 2424, 2444, 3414 (serial number 3516 and up), and 3444. It measures: 6 1/2 inches x 3 1/2 inches. It has 10 splines and a 1.62 inch spline diameter. It replaces part number 395161R1. Priced each disc.
(Item #: 105450, Ref: 1975464C2)
$12.50
Brake Actuator
- This Brake Actuator is used with 6.5 inch discs. B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. Replaces 3067135R91, 3105296R91, 3067135R92.
(Item #: 105484, Ref: 3105296R91)
$59.00
No
Picture
Brake Boot Dust Cover
- Rubber. For tractor models 2300A, B414 after serial number 31374, 354, 364, 384, 424, 434, 444, 2424, 2444, 3414 after serial number 3515, 3444.
(Item #: 127411, Ref: 3064173R1)
$9.40
Disc Brake Actuating Spring
- This Disc Brake Actuating Spring is 1.135 inch overall length, 0.825 inch outside diameter and 0.110 inch wire diameter. Fits models: B414, 2424, 2444, 354, 364, 384, 424, 434, 444; Replaces: 3066876R1.
(Item #: 124547, Ref: C5NN2N320A)
$2.00
Disc Brake Ball Bearing
- Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB
(Item #: 126209, Ref: M830T)
$3.00
Clutch
No
Picture
Clutch Alignment Tool
- 1-1/8 inch 10 spline, 1-5/8 inch 10 spline, 3/4 inch pilot. For tractor models 364, 384, 385, 395, 494, 574, 584, 585, 595, 895, 995, 3230, 4210, 4220, 2400A, 2400B, (424, 2444 with single disc), 2500A, 2500B, 3500, 3500A.
(Item #: 113942, Ref: S.70912)
$21.80
No
Picture
Clutch Alignment Tool
- 1-1/8 inch 10 spline, 1-3/4 inch 10 spline, 13/16 inch pilot. For tractor models 384, 414, 424, 444, 2300, 2300A, 2424, 2444.
(Item #: 122047, Ref: S.70922)
$26.80
Clutch Assembly, Dual
- Contains Pressure Plate number 1539022C1, clutch disc number 1539025C1, PTO disc number 1539020C1.
(Item #: 172511, Ref: 628135609)
$1469.01
No
Picture
Clutch Disc
- For International / Farmall tractor models 354, 364, 374, 384, 424, 434, 444, 2300, 2300A, 2424, 2444, Replaces Case IH OEM number 390010,
(Item #: 166096)
$130.00
Clutch Disc, Remanufactured, 392076R92
- For International / Farmall tractor models 424 (w/ Gas or Diesel Engine, s/n 10242 - earlier), 444 (All w/ Gas Engine), 2424 (s/n 2520 - earlier), 2444 (All w/ Gas Engine), 3444, Replaces International OEM number 392076R92, 392076HD6, Clutch Size: 11", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Reg Pads, For Single Clutch,
(Item #: 205994)
$157.15
Clutch Disc, Remanufactured, 392076R92, H392076
- For International / Farmall tractor models 424 (w/ Gas or Diesel Engine, s/n 10242 - earlier), 444 (All w/ Gas Engine), 2424 (s/n 2520 - earlier), 2444 (All w/ Gas Engine), 3444, Replaces International OEM number 392076R92, H392076, Clutch Size: 11", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads,
(Item #: 205995)
$134.00
Clutch Lever
- Used In 390011R91 Dual Clutch Assembly. For tractor models 424, 444, 2424, 2444.
(Item #: 173023, Ref: 392499R2)
$15.90
Clutch Pressure Plate
- Pressure Plate: 11 inch, with PTO disc, with 1.344 inch flywheel step (Auburn Design). For tractor models B414, 424, 434, 444, 2424, 2444. Replaces 399536R92.
(Item #: 158382, Ref: 390011R92)
$742.00
Clutch Shaft
- For tractor models 2424, 2444, 384, 424, 444, B275, B414. Also replaces 751048R2.
(Item #: 179948, Ref: 3071270R1)
$20.10
No
Picture
Pressure Plate, Remanufactured
- For International / Farmall tractor models 424, 444, 2424, 2444, 3444, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item,
(Item #: 206068)
$105.00
Pressure Plate, Remanufactured, 392077R91
- For International / Farmall tractor models 424 (s/n 10242 - earlier), 444, 2424 (s/n 2520 - earlier), 2444, Replaces International OEM number 392077R91, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 3, Pressure Plate Type: Single Stage,
(Item #: 203732)
$81.00
PTO Clutch Disc, 9 Inch
- PTO Clutch disc, organic, 9 inch, Heavy duty hub, (1.750 inch, 10 spline). For the following tractors: 345, 354, 364, 384, 424, B414. Industrial: 2300, 2444, 3414, 3444.
(Item #: 113815, Ref: 1753753M94)
$42.60
No
Picture
PTO Disc
- This 9 inch diameter organic PTO clutch disc has heavy duty hub with 10 splines with 1.75 hub diameter. For models 2424 and 2444.
(Item #: 163114, Ref: 709640R92)
$54.00
Release Bearing
- Clutch release bearings, 3.500 inch outside diameter, 2.375 inch inside diameter, .730 inch wide bore. For tractor models 300, 330, 340, 350, 424, 444, 460 with standard clutch, 504, 606, 2424, 2444, 2504. For 1066, 140, 1466, 1468, 1566, 1568, 2400A, 2500A, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 464, 5088, 5288, 5488, 574, 666, 674, 686, 766, 966, Cub, Cub Lo-Boy, HYDRO 100, HYDRO 70, HYDRO 86.
(Item #: 107995, Ref: 59879D)
$32.00
No
Picture
Release Bearing
- Measures 2.268 inch inside diameter, 3.813 inch outside diameter, .796 inches thick. For tractor models with double clutch: 2300, 2424, 2444, 3444, B250, B275, 276, 354, 364, 374, 384; models with single clutch: 2300, 2400B, 2656, 3400A, 3434A, 3434B, 3444, 3500A, 3514.
(Item #: 124574, Ref: 405625R91)
$37.00
No
Picture
Trans Disc 11 Inch
- For double clutch, 4 button, spring loaded. 10 spline on 1 1/8 inch hub. For tractor models 2300A, 3414, 3444, B275, 276, 354, 374, 384; single clutch in models 2300, 2424, 2444, 3414, 3434, 3444, B276, 2350, 2350A, 276, 354, 364.
(Item #: 172620, Ref: 392076R92)
$165.00
Cooling System
Fan, 4 Blade
- 16.00 inch outside diameter, 1.250 inch pilot hole, 1.937 inch center to center on bolt holes. For tractor models 200, 230, 240, (2404 with C-135 engine), (2444 Lo-Boy with C-153 engine), (330, 340, 404 all with C-135 engine), (444 with C-153 engine).
(Item #: 163811, Ref: A173710)
$81.00
Radiator Cap
- 7 pound, fits short filler neck. For tractor models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 serial number 44C0034705 and below), (1660 serial number JJC0038346 and below), (1680 serial number JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9.
(Item #: 112331, Ref: 180224M91)
$6.30
Radiator Cap
- 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. (** = FOR SHORT FILLER NECK). Fits **Super H, **Super M, MD, **Super W4, **Super W6 and WD6, **Super W9 and WD9, **100, **130, **140, **200, **230, 240, **300, **330, 340, **350, **400, 404, **424, **444, **450, **460, **504, **560, 606, **660, 2424, 2444, 2504, 2606, 4100, 4156, 4166. Replaces OEM 393229R91.
(Item #: 112331, Ref: 180224M91)
$6.30
Radiator, Gas and Diesel
- This radiator has a core height of 16 inches, width of 16 1/4 inches. It is 2 inches deep with 3 rows of tubes and 5 rows of fins per inch. The inlet is 2 3/8 inches and the outlet is 2 inches. It is copper and brass construction. replaces original part number 388458R91. Not for Europe built tractor.
(Item #: 152350, Ref: 388458R91)
$629.00
Radiator Hose - Bulk 3 x 1-3/8"
- For International / Farmall tractor models H, OS4, Super H, Super W4, W4, 140, 200, 240, 274 (Diesel), 300, 340, 350, 404, 424 (Gas), 444, 2404, 2424 (Gas), 2444, Replaces Case IH OEM number 369092R2, 407002R1, 387721R1, I.D. (A): 1-3/8" (1.375"), O.D.: 1-3/4" (1.750"), Length: 3', For Hose Clamp use Item #: 130453,
(Item #: 114083)
$22.80
Water Pump
- This water pump comes with hub and gasket for tractor models 140, (200, 230, IH 240 serial number 65001 and up with C123 engine), (330, 340, 404 with C135 engine), 2400, 2404, 2424, 2444, 4000, 444, all with C123 serial number 65001 and up, C135, C146 or 153 Gas engines. Replaces 367683R91, 375793R91, 367686R91, 367683R91.
(Item #: 113376, Ref: 375793R92)
$63.00
Water Pump Gasket
- Used on 200, 230, 240, 2404 Indust/Const, 2424 Indust/Const, 2444 Indust/Const, 2504 Indust/Const, 330, 340, 404, 424, 444, 504. Replaces 367687R2
(Item #: 153405, Ref: 367687R2)
$3.80
Water Pump Pulley
- Single groove pulley. For tractor models 2404, 2444, 2504, 404, 444, 50.
(Item #: 108755, Ref: 367688R1)
$116.00
Decals and Emblems
Front Emblem
- Plastic "IH", red, black and white, 3-3/4 inch x 2-3/4 inch. For tractor models Cub Lo-Boy, 154, 184, 185, 140, 276, 404, 424, 434, 444, 504, 544, 553, 606, 654, 656, 666, 686, 706, 724, 756, 766, 786, 806, 824, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1586, 2400, 2404, 2424, 2444, 2500, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 21206, 21256, Hydro 70, Hydro 86.
(Item #: 108481, Ref: 2751846R1)
$19.10
Hood Ornament, Chrome
- For tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544.
(Item #: 108483, Ref: 369180R1)
$77.00
Hood Ornament, Used
- For International tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2826, Replaces International OEM number 369180R1, Chrome finish, For a new version of this item use Item #: 108483, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.,
(Item #: 435392)
$43.20
Drive Train
Bull Pinion Cage
- This Pull Pinion Shaft Cage is right side. It is used on CASE-IH B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. Replaces 3064164R11, 3072916R11, 3071402R11
(Item #: 179381, Ref: 3071402R11)
$134.00
Clutch Shaft
- For tractor models 2424, 2444, 384, 424, 444, B275, B414. Also replaces 751048R2.
(Item #: 179948, Ref: 3071270R1)
$20.10
Hi / Low Range Shift Lever Seal
- This hi / low range shift lever seal has a .625 inch Inside Diameter, a 1.128 inch Outside Diameter and is .25 inch wide. It Fits: 2300A, 2424, 2444, 3414, 3444, 354, 364, 384, 424, 434, 444, 7000, B-275, B-276, B-414. Replaces: 132707R91, 23676D, 3069986R91, 353183R91, 353183R92, 353183R93, 381369R91, 385038R91, 721-3011, 751086R91, 751087R91, 921-3011, 471466
(Item #: 178140, Ref: A26778)
$8.10
Oil Seal
- Fits: [A, A-I, A1, AV, AV-1, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 2404, 404 (Top Transmission Shaft Front Seal)], [B-250, B-275, B-276, B-414, 2300, 2300A, 2424, 2444, 3414, 3444, 354, 364, 384, 424, 434, 444 (Bull Pinion Shaft Bearing Retainer Seal)], [Cub, Cub Lo-Boy, 154, 184, 185 (Final Drive Upper Pinion Shaft Seal)], [M, MD, MDV, MV (Transmission Counter Shaft Front Seal)], MTA (Front Wheel Seal; with single front 900 x 10 wheel), [O4, OS4 (PTO Output Shaft Seal; serial number 2159 to 9300)], [Super M, Super MD, Super MDV, Super MV (Transmission Counter Shaft Front Seal; up to serial number F52627 and up to seril number L51241)], W4 (PTO Output Shaft Seal; serial number 786 to 9300). Replaces: 21969D, 264694R91, 287440R91, 3043788R91, 3043788R92, 358765R91, 358784R91, 358808R91, 358823R91, 381907R91, 42177D, 43278D, 50839D, 530969R91, 703907R91, 703908R92, A29424.
(Item #: 178204, Ref: 381907R91)
$6.00
Transmission Coupling
- For tractor models 2424, 2444, 384, 424, 444.
(Item #: 751076R3)
$69.44
Transmission Drive Shaft Seal
- Drive Shaft Seal for tractor models 2424, 2444, 384, 424, 444, B275, B414. Also replaces 751080R93.
(Item #: 178578, Ref: 751080R91)
$15.20
Transmission Gear
- 2nd and 3rd gear for tractor models 2424, 2444, 384, 424, 444, B275, B414.
(Item #: 182672, Ref: 751071R1)
$142.00
Transmission Gear
- 4th and Direct. For tractor models 2424, 2444, 384, 424, 444, B275, B414. Replaces 751073R1
(Item #: 178391, Ref: 751073R1)
$54.00
Transmission Gear
- 4th and Direct gear (31 teeth) for tractor models 2424, 2444, 384, 424, 444, B275, B414.
(Item #: 178390, Ref: 751072R1)
$81.00
Transmission Gear
- 2nd Gear for models: 2424, 2444, 384, 424, 444, B275, B414
(Item #: 182677, Ref: 751054R1)
$97.00
Transmission Gear
- Reverse Shaft and Gear for models: 2444, 354, 364, 384, 424, 444. Replaces International OEM nos 3071849R2, 3071849R1. Overall Length: 5.160", Out Side Diameter at Oil Grooves: .989", Out Side Diameter at Splines: 1.143", Out Side Diameter at Lower Shaft: 1.260", Out Side Diameter at Gear: 3.140", Splines: 26, Gear Teeth: 20
(Item #: 134303, Ref: 3071849R2)
$73.00
Transmission Gear
- 3rd and 4th Gear for models: 2424, 2444, 384, 424, 444, B414
(Item #: 179627, Ref: 751055R3)
$130.00
Transmission Gear Kit
- Ring and Pinion for tractor models B414, 424, 444, 354, 364, 384, 3414, 2424, 2444.
(Item #: 3069966R91)
$270.30
Electrical System
Alternator
- Alternator, 12 volt, 61 amp, external regulator, 2 terminal 12 o-clock position. For 100, 1000, 105, 1066, 110, 1100, 1110, 115, 120, 1200, 1206, 1256, 1275, 1300, 1456, 1466, 1468, 200, 205, 210, 21206, 21256, 21456, 222, 225, 23, 230, 2444, 2544, 2606, 2656, 2706, 275, 2756, 2806, 2856, 3110, 315, 3410, 3444, 3514, 3516, 3616, 375, 3800, 3850, 403, 4100, 4300, 444, 503, 504, 544, 601, 602, 606, 616, 622, 656, 706, 756, 766, 806, 815, 856, 915, 966, HYDRO 100.
(Item #: 113606, Ref: 1100883)
$120.00
Alternator
- 12 volt, 55 amp. For tractor models (856D 1967 to 1971 with 407 diesel), (1026D, Hydro 1026D 1970 to 1971 with 407 diesel), (1206D 1965 to 1967 with 361 diesel), (1256D 1967 to 1969 with 407 diesel), (1456D 1969 to 1971 with 407 diesel), (444 1967 to 1971 with 153 gas), (454 1970 to 1971 with 157 gas), (454D 1970 to 1973 with 179 diesel), (544 1968 to 1973 with 200 gas), (544D 1968 to 1973 with 239 diesel), (574 1970-72 with 200 gas), (574D 1970-72 with 239 diesel), (606 1965 to 1967 with 221 gas/LPG), (606D 1965 to 1967 with 236 diesel), (2444 1968 to 1970 with 153 gas), (2444D 1968 to 1970 with 154 diesel), (2544 1969 to 1970 with 200 gas), (2544D 1969 to 1970 with 239 diesel), (2656 1971 to 1972 with 263 gas/LPG), (2656D 1971 to 1972 with 268 diesel), (2756 1967 to 1971 with 291 gas/ 310 diesel), (2806 1965 to 1967 with 301 gas), (2806D 1965 to 1967 with 361 diesel), (2826 1970 to 1971 with 301 gas). Replaces 1100805, 1100883, 1100791, 1100778, 1100720, 1100771.
(Item #: 113606, Ref: ADR0231)
$120.00
Distributor Cap Spring Clip
- Fits listed IH models when equipped with IH brand distributor 353898R11. Replaces: 107384C1, 353894R1
(Item #: 178117, Ref: 353894R1)
$16.80
Distributor Drive Housing
- This is a new distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing, part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11.
(Item #: 178938, Ref: 363749R91)
$108.00
Distributor Gear
- This Distributor Gear has 32 teeth. It is used on IH Distributor 353898R11. Replaces original part numbers 353902R1, 531461R91
(Item #: 111179, Ref: 353902R1)
$29.00
Distributor Hold Down Clamp
- For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1.
(Item #: 182464, Ref: 341139R1)
$9.20
Distributor Shaft Bushing and Shim Kit
- International Distributor Shaft Bushing and Shim Kit. Fits tractor models A, A1, AV, AV1, B, BN, C, Cub, Cub Lo-Boy, H, HV, M, MTA, MTAV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 300, 330, 340, 3444, 350, 3514, 400, 404, 424, 444, 450, 504, 600, 650. Replaces: 252739R1, 352298R1, 353899R1, 353921R1, 373577R91, 86637641. This is a 5-piece kit. The length is 2.006 inches.
(Item #: 178766, Ref: IHS3166)
$45.00
Distributor Tach Drive Housing Block Off Plate
- This new Distributor Tachometer Drive Housing Block Off Plate with Gasket is used with part number 363749R91 when a Tachometer is not used. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces 363764R1, 363765R1.
(Item #: 150708, Ref: 363764R1)
$9.40
Distributor with base less tach drive, Remanufactured
- For International / Farmall tractor models A, B, C, Cub, H, HV, I4, I6, M, MTA, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2404, 2424, 2444, 2504, 3444, 3514, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models T6, T340, 500, Without tachometer drive and with base, Includes new distributor cap, points, condenser, 6V Coil, and all other parts needed for a thorough rebuilt unit,
(Item #: 203588)
$235.01
Fuse Holder Kit
- For Cub, Cub Lo-Boy, Hydro 70, Hydro 86, Hydro 100, 140, 404, 424, 444, 454, 464, 504, 574, 606, 656, 666, 674, 686, 706, 756, 766, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2400A, 2404, 2424, 2444, 4500A, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 1500, 21026, 21206, 21256, 21456. Replacement Fuse Holder Kit. Mounts on 5/8 inch diameter hole in instrument panel. 2 spade connectors.
(Item #: 112273, Ref: 376852R91)
$10.90
Glow Plug Resistor Indicator
- This Glow Plug Resistor Indicator is for tractor models B250, 274, 275, 354, 414, 424, 434, 444, 2300, 2444. Replaces 703557R92, 706685R92, 3042230R91
(Item #: 168898, Ref: 3042230R91)
$20.70
Key Switch, 2 Terminal
- With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2.
(Item #: 113393, Ref: 366313R91)
$13.90
Spark Plug Wires
- Original design with screw in ends. For tractor models B275, B414, B434, 354, 364, 424, 444, 2424, 2444, 3414, 3444, with gas engines with Lucas distributors with threaded plug wires. 2 wires at 10-1/2 inches long, 1 wire 14-1/4 inches long, 1 wire 17-3/4 inches long and the coil wire is 9 inches long. Replaces 3044219R93, 181604M91, 181605M91, 825708M91, TO12284.
(Item #: 111200, Ref: B5217)
$44.10
Starter
- Replacing Delco starter numbers 1108323, 1109589 this is a new 12 volt 10MT Delco style starter with 9 tooth drive. It is direct drive with clockwise rotation. Used on gas International 2424, 2444, 424, 444. Also replaces 104192A1
(Item #: 160373, Ref: 396587R91)
$363.00
No
Picture
Starter - Delco Style (4243), Remanufactured, Delco Remy, 1108323, 104192A1
- For International / Farmall tractor models 424, 444, 2444 (all gas), Replaces International OEM number 104192A1, 396587R91, Replaces Delco Remy manufacturer number 1108323, 1109589, Replaces manufacturer number 4243, 140-706, 91-01-4179, Delco Style, Voltage: 12, Rotation: Clockwise, Teeth: 9, For a New version of this sku use Item #: 160373,
(Item #: 203456)
$283.54
No
Picture
Starter Drive
- Starter drive, services Delco starter: 1107585. Tractors: 424, 444, 2424, 2444. 10 teeth. For 2424, 2444, 424, 444
(Item #: 179564, Ref: 1846554)
$37.00
Starter Drive
- Starter drive, services Delco starters: 1108323, 1107364. For tractor models 424, 444, 656, 2424, 2444, 2656. 9 teeth. For 2424, 2444, 2656, 424, 444, 656. Also replaces 1946220.
(Item #: 127285, Ref: 1892899)
$34.00
Switch, Push Button
- This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91.
(Item #: 121141, Ref: R7994)
$12.00
Switch, Push Button
- This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91.
(Item #: 121141, Ref: R7994)
$12.00
Engine Bearings
Cam Bearing Set
- Camshaft bearing kit, 3 bearings. Individual bearings not available. For BD154 CID diesel engine in tractors 238, 364, 384, B414, 424, 434, 444, 2424, 2444. For 238, 2424, 2444, 354, 364, 384, 424, 4324, 434, 444, B250, B275, B276, B414
(Item #: 106663, Ref: CBK-H144)
$40.00
Connecting Rod Bearing - .010" Oversize - Set
- For International / Farmall tractor models B275, B414, 354, 364, 384, 424, 444, 2424, 2444, 3444, Compatible with International Construction and industrial models 3414, 3444, Compatible with International Engine (s) BC144 (gas), BD144 (diesel), BD154 (diesel), Replaces International OEM number 1082408R91, Sold in complete sets, Bearing Size: .010" Oversize, For Standard connecting rod bearing use Item #: 106460,
(Item #: 106458)
$17.87
Connecting Rod Bearing - .020" Oversize - Set
- For International / Farmall tractor models B275, B414, 354, 364, 384, 424, 444, 2424, 2444, 3444, Compatible with International Construction and industrial models 3414, 3444, Compatible with International Engine (s) BC144 (gas), BD144 (diesel), BD154 (diesel), Replaces International OEM number 1082410R91, Bearing Size: .020" Oversize, Sold in complete sets, For Standard connecting rod bearing use Item #: 106460,
(Item #: 106459)
$21.20
Connecting Rod Bearing - .030" Oversize - Set
- For International / Farmall tractor models B275, B414, 354, 364, 384, 424, 444, 2424, 2444, 3444, Compatible with International Construction and industrial models 3414, 3444, Compatible with International Engine (s) BC144 (gas), BD144 (diesel), BD154 (diesel), Replaces International OEM number 3070537R11, 3070547R91, Sold in complete sets, Bearing Size: .030" Oversize, For Standard connecting rod bearing use Item #: 106459,
(Item #: 106460)
$22.70
Main Bearings - .010" Oversize - Set
- For International / Farmall tractor models 404, 424, 444, 504, 2404, 2424, 2444, 2504, Compatible with International Engine (s) C135, C146, C153, Replaces International OEM number 376660R11, 376661R11, Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106591,
(Item #: 106589)
$171.00
Main Bearings - .010" Oversize - Set
- For International / Farmall tractor models B275, B414, B434, 354, 364, 384, 424, 444, 2424, 2444, 3444, Compatible with International Construction and industrial models 3414, 3444, Compatible with International Engine (s) BC144, BD144, BD154, Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106595,
(Item #: 106593)
$73.00
Main Bearings - .020" Oversize - Set
- For International / Farmall tractor models 404 (Gas), 424 (Gas), 444 (Gas), 504 (Gas), 2404 (Gas), 2424 (Gas), 2444 (Gas), 2504 (Gas), 3514 (Gas), Compatible with International Engine (s) C135 (Gas (sn:100501-later), C146 (Gas), C153 (Gas), Replaces International OEM number 376664R11, 376663R11, Gas engines, Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106591,
(Item #: 106590)
$177.00
Main Bearings - .020" Oversize - Set
- For International / Farmall tractor models B275, B414, B434, 354, 364, 384, 424, 444, 2424, 2444, 3444, Compatible with International Construction and industrial models 3414, 3444, Compatible with International Engine (s) BC144, BD144, BD154, Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106595,
(Item #: 106594)
$49.00
Main Bearings - .030" Oversize - Set
- For International / Farmall tractor models B275, B414, B434, 354, 364, 384, 424, 444, 2424, 2444, 3444, Compatible with International Construction and industrial models 3414, 3444, Compatible with International Engine (s) BC144, BD144, BD154, Replaces International OEM number 3070537R11, 3070547R91, Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106594,
(Item #: 106595)
$77.00
Main Bearing Set - Standard
- For International / Farmall tractor models B275, B414, B434, 354, 364, 384, 424, 444, 2424, 2444, 3444, Compatible with International Construction and industrial models 3414, 3444, Compatible with International Engine (s) BC144, BD144, BD154, Replaces International OEM number 3064523R11, 708910R91, Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 106595,
(Item #: 106592)
$49.00
Main Bearings - Standard - Set
- For International / Farmall tractor models 404, 424, 444, 504, 2404, 2424, 2444, 2504, Compatible with International Engine (s) C135 (gas), C146 (gas), C153 (gas), Replaces International OEM number 375755R11, 375762R11, Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 106591,
(Item #: 106588)
$141.00
Piston Pin Bushing
- Used in British International engines: BC144, BD144, BD144A, BD144C, BD154, BD154C, BD154T. This Piston Pin Bushing has an inside diameter of 27.5mm. Used in International models: B275, B414, 424, 444, 354, 365, 384, 3414, 2424, 2444, 238, 500. Replaces OEM numbers 3043611R1, 711045R1, 3043611R93
(Item #: 108502, Ref: 3043611R1)
$4.20
Rod Bearing Set
- For tractor models B250, B275, B276, 354, 434. (BD144 and BD144A CID Diesel 4-cylinder engine and for tractor models 238, 364, 384, B414, 424, 434, 444, 2424, 2444. (BD154 CID Diesel 4-cylinder engine. Flat head pistons. If other than standard, specify size in comments. (.010, .020).
(Item #: 106457, Ref: CRK4154D)
$15.70
Engine Gaskets
Front Crank Seal
- Front seal, for diesel engines. For 238, 2424, 2444, 354, 364, 384, 424, 434, 444, B250, B275, B276, B414
(Item #: 106641, Ref: 3108650R91)
$10.60
Front Crankshaft Seal
- For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, Super A, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504, Compatible with International Engine (s) C60 (Gas and LP), C113 (Gas and LP), C123 (Gas and LP), C135 (Gas and LP), C146 (Gas and LP), C153 (Gas and LP), Replaces International OEM number 379620R92, 378193R91, 350708R1, 355769R1, 46179DC,
(Item #: 106638)
$14.80
Front Crankshaft Wear Sleeve
- This Front Crankshaft Wear Sleeve is used in British Diesel Engines: BC144, BD144, BD144A, BD144C, BD154, BD154C, BD154T. It is used to repair wear where the front crank shaft seal goes into the front timing cover.
(Item #: 184669, Ref: RP301112)
$68.00
Gasket set
- Complete Gasket Set For tractor models B250, B275, B276, 354, 434. (BD144 and BD144A CID Diesel 4-cylinder engine and Models 238, 364, 384, B414, 424, 434, 444, 2424, 2444. (BD154 CID Diesel 4-cylinder engine. Flat head pistons
(Item #: 164341, Ref: GK4154D)
$120.00
Head Gasket Set
- For tractor models 404, 2404 both with C135 gas engine serial number 100501 and up. 424 with C146 gas engine. 444, 504, 2444, 2504, and 3514 with C153 gas engine.
(Item #: 106683, Ref: HS3287VC)
$45.00
Liner Sealing Ring
- For International / Farmall tractor models B275, B414, B434, 354, 364, 384, 424, 444, 2424, 2444, 3444, Replaces International OEM number 704100R1, 1 required per cylinder sleeve,
(Item #: 128744)
$2.70
Lower Gasket Set
- For BD154 and BD144 CID 4 cylinder diesel engines. For tractor models 238, 2424, 2444, 354, 364, 384, 424, 434, 444, B250, B275, B276, B414. Replaces 3048863R91, 3041249R1, 3041249R92, 3041249R94
(Item #: 106723, Ref: CS4154D)
$65.00
Oil Pan Gasket
- Oil pan gasket. For BD154 CID diesel 4 cylinder engine in tractors 238, 364, 384, B414, 424, 434, 444, 2424, 2444. For 238, 2424, 2444, 354, 364, 384, 424, 434, 444, B250, B275, B276, B414
(Item #: 106701, Ref: 703840R1)
$7.00
Pre-Combustion Chamber Upper Gasket
- For International / Farmall tractor models B275, B414, TD5, 354, 364, 424, 434, 444, 2444, Replaces International OEM number 710382R3, Fits Between Pre Combustion Chamber and Pre Combustion Chamber Holder,
(Item #: 184222)
$2.60
Rear Crank Seal
- Rear seal, for diesel engines. 3.630" I.D x 4.380" O.D. x 0.435" Wide For 238, 2424, 2444, 276, 354, 364, 384, 424, 434, 444, B250, B275, B276, B414 Replaces: 3072092R1, 3072092R91, 708903R91
(Item #: 106655, Ref: 3072092R91)
$17.40
Timing Cover Gasket Set
- This Timing Cover Gasket Set contains: Governor housing gasket, Water pump plate gasket, Fan bracket gasket, Timing cover gasket, Front crankshaft seal with seal saver and Lower water outlet gasket. Use on C113, C123, C135, C146, and C153 Gas or LP engines. Fits A, AV, B, BN, C, Super A, Super AV, Super C, 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 330, 3514, 404, 424, 444, 504. Replaces OEM part numbers: 45875D, 375745R1, 375745R2, 43294D, 43294DA, 46179D, 46179DC, 43442D, 49177D, 378193R91, 46871D, 68104C1, 68104C2.
(Item #: 182535, Ref: 46179DKit)
$32.00
Upper Gasket Set
- Upper Gasket Set for 4 Cylinder Diesel Engine. For tractor models 2424, 2444, 354, 364, 384, 424, 434, 444, B250, B275, B276, B414.
(Item #: 106684, Ref: 706105R93)
$44.00
Valve Cover Gasket
- This Valve Cover Gasket is used on Gas Engines; C113, C123, C135, C146, C153. It replaces OEM/Original part numbers 43378DB, 43378DD, 43378DE.
(Item #: 128613, Ref: 43378DE)
$9.90
Valve Cover Gasket
- For International / Farmall tractor models B275, B414, B434, 354, 364, 384, 424, 444, 2424, 2444, 3444, Compatible with International Construction and industrial models TD5, 500, Compatible with International Engine (s) BC144 (gas), Replaces International OEM number 3069767R1, 3069767R2, Replaces manufacturer number 73069767,
(Item #: 158264)
$7.90
Valve Seals
- Valve Guide Seal - Positive Type
(Item #: 183858, Ref: 386192R1)
$3.40
Engine Rebuild Kits
No
Picture
Basic Engine Overhaul Kit, Less Bearings
- For tractor models 238, 364, 384, B414, 424, 434, 444, 2424, 2444. (BD154 CID Diesel 4-cylinder engine. Flat head pistons). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED.
(Item #: 130583, Ref: BEKH4154D-LCB)
$499.00
No
Picture
Basic In-Frame Engine Kit
- For tractor models 238, 364, 384, B414, 424, 434, 444, 2424, 2444. (BD154 CID Diesel 4-cylinder engine. Flat head pistons). Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket.
(Item #: 189598, Ref: BIFH4154D)
$541.00
Cylinder Sleeve
- For International / Farmall tractor models B414, B434, 364, 384, 424, 444, 2424, 2444, 3444, Compatible with International Construction and industrial models 3414, Compatible with International Engine (s) BD154 (s/n 57679-later), Replaces International OEM number 3044481R3, Sleeve Flange Diameter: 3.996",
(Item #: 128729)
$49.00
Engine Rebuild Kit - Less Bearings, C153
- For International / Farmall tractor models 444, 504, 2444, 2500, 2504, 3514, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models 4000, Compatible with International Engine (s) C153 (gas), Compatible with International Hay Cutting (s) 210, 225, 230, 275, 375, Bore: 3.375", Stroke: 4.250", Kit includes: Pistons, Piston Ring Set and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106591,
(Item #: 130595)
$619.00
No
Picture
Piston - .040" Oversize
- For International / Farmall tractor models 444, 504, 2444, 2500, 2504, 3514, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models 4000, Compatible with International Engine (s) C153 (Gas/LP, 4 cylinder), Compatible with International Hay Cutting (s) 210, 225, 230, 275, 375, Replaces International OEM number 378185R92, Includes pin and retainer clips, Does not include piston rings, Oversize: .040",
(Item #: 185592)
$459.00
No
Picture
Rebore Kit -.030" Oversize - Complete Set
- For International / Farmall tractor models 444, 504, 2444, 2504, 3514, Compatible with International Engine (s) C153 (Gas, 4 cylinder), Bore: 3-3/8", Oversize: .030", Kit includes: pistons, piston rings, piston pins, and retainers, Complete 4 cylinder set,
(Item #: 186632)
$497.00
No
Picture
Valve Overhaul Kit, 2 Spring
- Cylinder Head Overhaul Kit with Inner and Outer Valve Springs. For tractor models 238, 2424, 2444, 354, 364, 384, 424, 434, 444, B250, B275, B276, B414 all with either BD144, BD144A or BD154 engines. Includes intake valves, exhaust valves, valve guides, valve springs. Valve locks, part number 704443R1 are sold individually.
(Item #: 184962, Ref: VOKH144)
$176.00
Engine Parts
No
Picture
AH935R
- Single. For tractor models B250, B275, B276, 354, 434. (BD144 and BD144A CID Diesel 4-cylinder engine) and for tractor models 238, 364, 384, B414, 424, 434, 444, 2424, 2444. (BD154 CID Diesel 4-cylinder engine). Flat head pistons.
(Item #: 168486, Ref: 3043825R1)
$11.90
Camshaft
- For tractor models B275, B414, 424, 434, 444, 354, 364, 384, 3414, 2424, 2444, TD5, EARLY 500 with diesel engines. Replaces 709450R1, 3063934R3, 3064086R91. Verify 1 5/16 inch diameter on cam where cam gear fits on. Replacement gear available as part number 3064085R1.
(Item #: 112371, Ref: 3063934R3)
$92.00
Camshaft Gear
- This Camshaft Gear is used with 3063934R3 Camshaft. Replaces 3064085R1, 703812R1
(Item #: 112370, Ref: 3064085R1)
$32.00
Camshaft Retaining Plate
- This Camshaft Retaining (Thrust) Plate used on IH B275, B414, 424, 434, 444, 354, 364, 384, 3414, 2424, 2444, TD5, EARLY 500. Replaces 43249D
(Item #: 180159, Ref: 43249D)
$7.80
Connecting Rod
- For tractor models 2424, 384, 424, 444, B414, with the BC144, BD144, BD154 gas/diesel engines engine. Replaces 3061214R91, 3061215R1, 061214R91, 306215R1, 704088R91, 706132R1
(Item #: 108438, Ref: 3061214R91)
$47.00
Connecting Rod, Remanufactured, 375595R1
- For International / Farmall tractor models 404, 424, 444, 454, 504, 2400A, 2400B, 2404, 2424, 2444, 2504 (& 4500B tractors), Replaces International Casting number 375595R1, Casting number 375595R1,
(Item #: 203742)
$279.50
Crankshaft
- For tractor models 2424, 354, 364, 384, 424, 2300b 275, B414 all with either a BD144, or BD154 engine. Replaces 3110995R91, 751303R1
(Item #: 112327, Ref: 3110995R91)
$270.01
Crankshaft Gear
- This Crankshaft Gear used on IH B275, B414, 424, 434, 444, 354, 364, 384, 3414, 2424, 2444, TD5, EARLY 500. Replaces 703865R1
(Item #: 112413, Ref: 703865R1)
$34.00
Crankshaft Timing Gear
- 33 teeth, used in C113, C123, C135, C146, and C153 Engines. For tractor models A, Super A, AV, Super AV, B, BN, C, Super C, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504.
(Item #: 121687, Ref: 46870DA)
$65.00
No
Picture
Cylinder Head, Remanufactured, 703873R3
- For International / Farmall tractor models B275, B414, 354, 424, 444 (Diesel), 454, 2424, 2444, 3444, Compatible with International Construction and industrial models 3414, 3444, Replaces International Casting number 703873R3, Engine BD-144, Cylinders: 4, Casting No. 703873R3, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks,
(Item #: 203719)
$900.01
No
Picture
Cylinder Head, Used
- For International tractor models B275, B414, 354, 424, 444 (Diesel), 2444, 3444, Replaces International Casting nos 3043824R, 304489R, Engine(s): BD154, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.,
(Item #: 400195)
$350.01
Cylinder Head with Valves
- For tractor models B250, B275, B276, 354, 238, 364, 384, B414, 424, 434, 444, 2424, 2444 with BD154 and BD144 engines. Also replaces OEM 3043824R1, 3044489R91, 3043824R1 and 703872R98. Does not include prechamber cups.
(Item #: 112328, Ref: 3043824R12)
$536.00
Lifter, Refaced
- These Valve Tappets (Lifters) are used on IH B275, B414, 424, 434, 444, 354, 364, 384, 3414, 2424, 2444, TD5, EARLY 500. Diesel all with casting number 704782R1. Replaces 704782R1.
(Item #: 112412, Ref: R1188333)
$6.40
Pushrod
- Fits A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, U2, U2A, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504 (all with C113, C123, C135, C146, C153 gas/LP engines) 10.762 inch length, 0.310 inch tube diameter . Replaces: 360213R91, 357548R1, 47386D, 47385D.
(Item #: 182498, Ref: 47385D)
$43.00
No
Picture
Push Rod, Used
- For International tractor models A, B, BN, C, Super A, Super AV, Super C, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504, Compatible with International Engine(s) C123, C135, C146, C153, Compatible with International Hay Cutting(s) 201, Replaces International OEM number 357548R1, For a new version of this item use Item #: 182498, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.,
(Item #: 463344)
$24.01
Ring Gear, Flywheel
- This Flywheel Ring Gear measures 12.332 Inch Inside Diameter, 13.560 Inch Outside Diameter, Has 134 Teeth and is .485 Inches wide. Fits International Tractors; 300 diesel, 330 diesel, 340 diesel, 350 diesel, 424 gas, 444, 460, (504 diesel serial number 13675 and earlier, gas serial number 29632 and earlier), 544 with Synchromesh Transmission, 606 gas, 656, 666, 686, 2424, 2444, 2544 with Synchromesh Transmission, 2606, 3514 engine serial number 29632 and earlier. Also fits Construction and Industrials; T340, 4000. Replaces 367042R1
(Item #: 121882, Ref: 367042R1)
$61.00
No
Picture
Valve Guide
- Guide intake valve, 4 used per engine. For BD154 CID diesel 4 cylinder engine in tractors 238, 364, 384, B414, 424, 434, 444, 2424, 2444. For 238, 2424, 2444, 354, 364, 384, 424, 434, 444, B250, B275, B276, B414
(Item #: 184557, Ref: 3044492R1)
$6.30
No
Picture
Valve Guide, Exhaust
- For tractor models 238, 2424, 2444, 354, 364, 384, 424, 434, 444, B250, B275, B276, B414. Price shown is for each, sold only in multiples of 4 items.
(Item #: 173141, Ref: 3044493R2)
$10.60
No
Picture
Valve, Intake Set
- Set of 4 Intake Valves. For tractor models B250, B275, B276, 354, 434. (BD144 and BD144A CID Diesel 4-cylinder engine) and for tractor models 238, 364, 384, B414, 424, 434, 444, 2424, 2444. (BD154 CID Diesel 4-cylinder engine). Flat head pistons.
(Item #: 168477, Ref: 3040361R1)
$16.10
Valve Key
- VALVE KEY. For tractor models 238, 2424, 2444, 354, 364, 384, 424, 434, 444, B250, B275, B276, B414. NOTE: 16 halves required for a complete engine. Sold individually.
(Item #: 168426, Ref: 704443R1)
$33.00
No
Picture
Valve Service Kit
- Cylinder HEAD Service KIT For 238, 2424, 2444, 354, 364, 384, 424, 434, 444, B250, B275, B276, B414. Contains: springs, guides, locks, (no valves).
(Item #: VSKH144)
$684.81
Valve Spring
- For International / Farmall tractor models 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504, Compatible with International Engine (s) C135, C153, Replaces International OEM number 368450R1, Exhaust,
(Item #: 128648)
$9.60
Engine Pistons and Sleeves
Piston Pin Bushing
- Piston pin bushing, 4 used per engine. For C135, C146, C153, C157 CID gas 4 cylinder engines. Stepped head piston. For tractor models 2400A, 330, 340, 404, 424, 444, 504, 2504, 454, 3514, 2404, 2424, 2444, 2400B, 2405B, 2410B, 2412B, 4500.
(Item #: 128635, Ref: 367775R1)
$6.80
Rebore Kit, .020
- Used on C153 4-Cylinder Gas Engine, 3 3/8 inch standard bore plus .020 overbore, this kit includes Pistons, Rings, Pins, and Clips. This engine was used on International / Farmall 2444, 2504, 3514, 444, 504.
(Item #: 184936, Ref: R8026)
$497.00
Rebore Kit, .030
- Used on C153 4-Cylinder Gas Engine, 3 3/8 inch standard bore plus .030 overbore, this kit includes Pistons, Rings, Pins, and Clips. This engine was used on International / Farmall 2444, 2504, 3514, 444, 504.
(Item #: R8027)
$279.42
Rebore Kit, .040
- Used on C153 4-Cylinder Gas Engine, 3 3/8 inch standard bore plus .040 overbore, this kit includes Pistons, Rings, Pins, and Clips. This engine was used on International / Farmall 2444, 2504, 3514, 444, 504.
(Item #: 183389, Ref: R8028)
$497.00
Rebore Kit, Standard
- Used on C153 4-Cylinder Gas Engine, 3 3/8 inch standard bore, this kit includes Pistons, Rings, Pins, and Clips. This engine was used on International / Farmall 2444, 2504, 3514, 444, 504.
(Item #: 131583, Ref: R8025)
$497.00
No
Picture
Sleeve and Piston Kit
- For tractor models 238, 364, 384, B414, 424, 434, 444, 2424, 2444. (BD154 CID Diesel 4-cylinder engine. Flat head pistons.) Sleeves in this kit measure 3.995 diameter at the flange. Verify this measurement. Sleeves, pistons and rings, pins and retainers. For 3-1/2 inch standard bore.
(Item #: PK4154D)
$379.50
Engine Rings
No
Picture
Piston Ring Set
- Piston Ring set for 4 pistons~ 1 used per engine. For BD154 CID diesel, 3 1/2 inch bore, 4 cylinder engine. Contains 3 compression 3/32 and 2 oil rings 3/16 for each cylinder. For 238, 2424, 2444, 364, 384, 424, 434, 444, B414
(Item #: 174209, Ref: PRS4154D)
$65.00
No
Picture
Piston Ring Set - .020" Oversize - 4 Cylinder Set
- For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Standard Bore: 3.375", Ring Size: .020" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 4 cylinder set, For Single Cylinder Piston Ring Set use Item #: 120856,
(Item #: 174302)
$93.00
Piston Ring Set - .020" Oversize - Single Cylinder
- For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Standard Bore: 3.375", Ring Size: .020" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For 4 Cylinder .020" Oversize Piston Ring Set use Item #: 174302,
(Item #: 120856)
$29.90
Piston Ring Set - .030" Oversize - 4 Cylinder
- For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Standard Bore: 3.375", Ring Size: .030” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per 4 cylinder set, For single cylinder use Item #: 150214,
(Item #: 179376)
$98.00
Piston Ring Set - .030" Oversize - Single Cylinder
- For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Standard Bore: 3.375", Ring Size: .030” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For standard use Item #: 150214,
(Item #: 120857)
$28.20
No
Picture
Piston Ring Set - .040" Oversize - 4 Cylinder Set
- For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Standard Bore: 3.375", Ring Size: .040” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 4 Cylinder Piston Ring set, For Single Cylinder .040" Oversize Piston Ring Set use Item #: 120858,
(Item #: 174303)
$95.00
Piston Ring Set - .040" Oversize - Single Cylinder
- For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Standard Bore: 3.375", Ring Size: .040” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For .040" Oversize - 4 Cylinder Piston Ring Set use Item #: 174303,
(Item #: 120858)
$20.98
Piston Ring Set - .060" Oversize - 4 Cylinder
- For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Replaces International OEM number 539367R1, Standard Bore: 3.375", Ring Size: .060” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, For standard use Item #: 150213,
(Item #: 150214)
$215.00
Piston Ring Set - Standard - 4 Cylinder
- For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Ring Size: Standard, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 4 cylinder set, For single cylinder set use Item #: 150214,
(Item #: 179373)
$104.00
No
Picture
Piston Ring Set - Standard - Single Cylinder
- For International / Farmall tractor models B414, 364, 384, 424, 444, 2424, 2444, 3444, Compatible with International Construction and industrial models 500, 3414, Compatible with International Engine (s) BD154, BD154T, Bore: 3.500", Ring Size: Standard, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: FV Spacer .125 " / Chrome Rail, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold per cylinder, For 4 Cylinder Piston Ring Set use Item #: 174209,
(Item #: 120851)
$23.00
Exhaust System
Exhaust/Intake Manifold
- Manifold for the C-123, C-135, C-146, C-153 gas engines in models: 130, 140, 20, 230, 240, 330, 340, 404, 2404, 424, 2424, 444, 2444 (T-4, T-5, T340 and 500 Crawler). Uses threaded exhaust fitting. Replaces part numbers 366305R11, 369645R21, 369645R22, 388584R11, 388584R21. Does not include gaskets set available as part number 352014R1. Does not include short exhaust pipe available as part number R0056P. 2-3/8 inch center-to-center carburetor mounting holes, 1-3/16" outside diameter exhaust ports at cylinder head. MAY OR MAY NOT COME PAINTED PER PICTURE.
(Item #: 101550, Ref: R0935)
$178.00
Exhaust Manifold Gasket
- This gasket is used with 3042719R11 manifold. Two are required. Sold individually. Replaces 704165R1, 704165R2, 704165R3, VPE3933.
(Item #: 113661, Ref: 704165R2)
$10.90
Exhaust Manifold, Vertical
- For tractor models B275, 354, 384, B414, 444, 2300, 2444 all with diesel engines. Gasket available as p/n 704165R2. Replaces 3042719R11, 3045354R11. NOTE - THIS MAY BE SLIGHTLY DIFFERENT THAN YOUR ORIGINAL MANIFOLD AND YOUR HEAT SHIELD MAY NEED TO BE TRIMMED AS THIS CASTING MAY BE SLIGHTLY LARGER.
(Item #: 113663, Ref: 3042719R11)
$57.00
Extension Pipe with Gasket
- For Diesel tractor models B250, B275, 354, 384, B414, 444, 2300, 2444. Replaces 3072544R1, 704613R1, 704614R1. Measures 1-55/64 inches pipe O.D., 5.600 inches overall length, 3.225 inches C-C bolt pattern.
(Item #: 113662, Ref: 3072544R1)
$23.00
Manifold Pipe
- This manifold pipe screws into manifold numbers R0935 and 251175R1. Inside diameter is 1 1/2 inch, outside diameter 1 15/16 inch. Length between 6 and 8 inches. For tractor models 130, 140, 20, 230, 240, 330, 340, 404, 2404, 424, 2424, 444, 2444, A, B, C, Super A, Super C, 240. Replaces: 47701DB.
(Item #: 101544, Ref: R0056P)
$11.60
Muffler
- Vertical muffler for gas tractors, fits engines C146, C153, and BC144. Inlet inside diameter 1-15/16 inch, outlet outside diameter 2 inches, length 27 inches, diameter 5-1/2 inches. For tractor models 424, 2424, 444, 504, 2444, 2500, 2504, 3514, 3444. For 2424, 2444, 2500, 2504, 3444, 3514, 424, 444, 504.
(Item #: 100808, Ref: 403825R1)
$47.30
Muffler Clamp
- Flanged Muffler Clamp. This clamp is serviceable but not exactly like the original for the following Gas and LP tractors with underslung exhaust system: 2444, 2504, 330, 404, 444, 504, 340, 424, 240, 300, 350. Also used on T4 Gas or LP crawler with underslung exhaust. Replaces original part number 362300R1
(Item #: 101515, Ref: FP185)
$4.80
Fuel System / Air Intake
Air Filter
- Measures: Inside Diameter: 2 1/32 inches (51.6mm), Outside Diameter: 3 9/16 inches (90.5mm), Length: 11 inches (279.4mm) this filter replaces Allis Chalmers 235863; Hyster 23471906; International 391852-R92; Towmotor 343008.
(Item #: 184807, Ref: AF1037)
$36.00
Cable - Choke, 371796R92
- For International / Farmall tractor models 404, 424, 444, 504 (Gas), 606 (LP), 2424, 2444, 2504 (Gas), 2606 (LP), Replaces International OEM number 371796R92, Length: 55",
(Item #: 161899)
$22.20
Carburetor
- DOWNDRAFT, fits B414, 3414, 3444, B275, 354 - new replacement carburetor for OEM BRITISH ZENITH. VN or VNN is stamped on the carburetor. Will not fit model 990. Replaces 3045515R92, , 3044193R92, 3063945R91, 3044193R92, 3063945R91, 341V, C1751, C1759, C1836, VN, VNN
(Item #: 168683, Ref: 1429N)
$642.87
Carburetor Elbow and Strainer
- For tractor models A, AV, B, BN, C, Super A, Super C, 130, 140, 2404, 2424, 2444, 2504, 3514, 404, 424, 444, 504 and various International Windrower and Combine models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. Replaces OEM number 69938D.
(Item #: 110005, Ref: 9N9553)
$5.50
Carburetor Elbow with strainer assembly
- This carburetor elbow with strainer assembly fits the models equipped with a 5/16 inch O.D. fuel line. 1/8 inch male threads. Fits Carter, Marvel Schebler and Zenith carburetors. Replaces 354827R91, 53796D, 67-528, 69938D
(Item #: 113655, Ref: 354827R91)
$35.00
Carburetor Kit, Basic
- Kit for Marvel TSX730, TSX744, TSX896, TSX857, TSX748, TSX896SL, TSX156, TSX157, TSX319 carbs used on 130, 140, 200, 230, 240, 2444, 2504, 3514, 404, 424, A, B, C, Super A.
(Item #: 100733, Ref: MS101)
$14.80
Carburetor Kit, Comprehensive
- Comprehensive Carburetor Kit for Marvel-Schebler carburetor numbers TSX896 and TSX896SL. Contains all parts shown.
(Item #: 184502, Ref: R7887)
$65.00
No
Picture
Carburetor, Rebuilt
- This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX896, TSX896SL. For the following tractor models: 424, 444, 2444. Center-to-Center on the mounting bolts is 2 5/16 inches. Add $150.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available.
(Item #: 203318, Ref: 1430-CARB)
$225.01
Fuel Filter, CAV type
- Fuel filter for tractor models 2300, 2400, 2424, 2444, 248, 2500, 2500A, 258, 268, 3414, 3514, B414, 1294, 1394, 1494, 1594, 2350, 276, 278, 354, 364, 384, 385, 424, 433, 434, 444, 454, 484, 485, 533, 574, 584, 585, 633, 644, 674, 684, 685, 733, 744, 784, 785, 833, 844, 884, 885, 201. Replaces: 1502155C91, 1966515C1, 3044506R93, 3144477R92, 796051R91, P143287. NOTE: verify you have CAV type filter before ordering. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall.
(Item #: 158868, Ref: CAV7111296)
$7.50
Fuel Pipe Coupling Nut
- For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, F12, F14, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, Super A, Super C, Super H, Super M, Super W4, TD6, TD9, W4, W6, W12, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 686, 706, 756, 806, 826, 856, 2444, 3514, 3616, Compatible with International Combine (s) 303, 403, 503, 615, 715, Replaces International OEM number 29899D, 700155R11, 700153R11, 1/2"-20 Hi-duty tube fitting, 5/16" O.D.,
(Item #: 112642)
$3.30
Fuel Sediment Bowl Gasket
- Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 13193D. Gasket may be cork or rubber depending on availability.
(Item #: 105383, Ref: 2NAA916061)
$2.60
Injector
- This Injector is used on B275, B414, 424, 434, 444, 354, 364, 384, 3414, 2424, 2444, TD5, EARLY 500. Replaces 1081629R91, 3040870R94
(Item #: 113286, Ref: 3040870R94)
$65.98
Injector Line Number 1
- This is Injector Line #1 For Rotary CAV Injection Systems. Used on B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. Replaces 708307R21, 708307R22
(Item #: 168488, Ref: 708307R21)
$17.50
Injector Line Number 2
- This is Injector Line #2 for Rotary CAV Injection Systems. Used on B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. Replaces 708308R31, 708308R21, 708307R22.
(Item #: 168427, Ref: 708308R21)
$10.10
Injector Line Number 3
- This is Injector Line #3 For Rotary CAV Injection Systems. Used on B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. Replaces 708309R21, 708309R22.
(Item #: 168489, Ref: 708309R21)
$17.50
Injector Line Number 4
- This is Injector Line #4 For Rotary CAV Injection Systems. Used on B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. Replaces 708310R21, 708810R21, 708310R22
(Item #: 168109, Ref: 708310R21)
$21.30
Injector Nozzle
- For tractor models B275, B414, 354, 364, 384, 424, 444, 2300, 2424, 2444, 3414, 3444. Replaces BDN45D6299.
(Item #: 182804, Ref: 3040871R91)
$47.00
Injector Pump Gasket Set
- Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV.
(Item #: 178115, Ref: CAV9094-713)
$38.00
Injector Pump Repair Kit
- Fits DPA CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110, 7135-110.
(Item #: 129312, Ref: CAV7135-110)
$13.50
Injector, Remanufactured, 3040870R94
- For International / Farmall tractor models B275, B414, 354, 364, 384, 424, 434, 444, 2300A, 2424, 2444, Compatible with International Construction and industrial models TD5, 444, 500, 2300A, 2424, 2444, Replaces International OEM number 3040870R94, 3040870, 3040871, 5303602, 5490001, Opening pressure 2400 psi, For use with CAV Rotary Pumps, Use Injector 209952 for equipoment with CAV Inline Pumps, For a New version of this sku use Item #: 113286,
(Item #: 209951)
$137.01
Injector, Remanufactured, 5303601, 5490003
- For International / Farmall tractor models B275, B414, 354, 364, 384, 424, 434, 444, 2400A, 2424, 2444, Compatible with International Construction and industrial models TD5, 444, 500, 2400A, 2444, Replaces International OEM number 5303601, 5490003, Opening pressure 242, For use with CAV Inline Pumps, Use Injector 209951 for equipment with CAV Rotary Pumps,
(Item #: 209952)
$137.01
Pre Cleaner Assembly
- Air Pre-Cleaner Assembly with a 2 inch base inner diameter and a 5 1/2 inch bowl. Fits models 2404, 2424, 2444, 2500A, 2500B, 2504, 340, 2414, 3444, 350, 404, 424, 444, 504, B275. Replaces 379660R91 and 407076R91.
(Item #: 186846, Ref: 101579AS)
$81.00
Precleaner Cap Assembly
- This new Air Pre-Cleaner Cap Assembly fits tractor models B275, 2404, 2424, 2444, 340, 3414, 3444, 404, 424, 444, 2500, 2504, 504, Farmall Rowcrop 350, International Utility 350. It replaces original part numbers: 362998R91, 379660R91, and 407076R91. It has a 2 inch inside diameter plastic base, 5-1/2 inch pre-cleaner outside diameter. MEASURE BEFORE ORDERING.
(Item #: 186846, Ref: B9NN9A660A)
$81.00
Precombustion Chamber
- This Pre-combustion Chamber is used on CASE-IH B275, B414, 424, 434, 444, 354, 364, 384, 3414, 2424, 2444, TD5, EARLY 500. Replaces 3045523R1,
(Item #: 113285, Ref: 3045523R1)
$13.00
Precombustion Chamber Holder
- This Precombustion Chamber Holder is used on B275, B414, 424, 434, 444, 354, 364, 384, 3414, 2424, 2444, TD5, EARLY 500. Replaces 708314R1
(Item #: 113284, Ref: 708314R1)
$19.30
Precombustion Chamber Lower Gasket
- Pre Combustion Chamber Lower Gasket Fits Between Pre Combustion Chamber and Cylinder Head. Replaces 706105R93, 719383R1, 716156R97, 761107R93, 764939R92, 764940R91
(Item #: 184215, Ref: 710383R1)
$3.30
Precombustion Chamber Upper Gasket
- Pre Combustion Chamber Upper Gasket Fits Between Pre Combustion Chamber and Pre Combustion Chamber Holder. Replace 3132305R92, 706105R93, 710382R2, 710382R1, 710832R3, 716156R97, 710328R3, 761107R93, 764939R92, 764940R91
(Item #: 710382R3)
$2.18
Sediment Bowl Gasket and Screen
- This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 13194D, 25854, 49923D
(Item #: 105364, Ref: 49923D)
$3.30
No
Picture
Throttle Friction Disc
- This Throttle Friction Disc measures 0.165 of an inch thick, 1.960 inches outside diameter and has a center hole of 0.530 of an inch diameter. For models 240, 2400A, 2424, 2444, 2500A, 2504, 2544, 2656, 274, 284, 340, 3444, 404, 424, 444, 454, 460, 464, 484, 504, 544, 560, 574, 584, 606, 656, 660, 664, 674, 684, 784, 884 and Hydro 84. Also replaces 388632R1, 394716R1 and 399168R1.
(Item #: 178163, Ref: 369463R1)
$6.40
Gauges
Fuel Sending Unit
- This sending unit is used on gas or diesel tractors: 2444, 444, 460, 560, 660. It is with Rochester Gauge and is calibrated for 0-70 ohms. Replaces: 1341373C1, 369608R91, 369608R92, 370376R92, 84203084, 84270826
(Item #: 151009, Ref: 369608R91)
$55.00
Tachometer Cable
- This tachometer cable measures 48 inches long and fits the following tractor models without a cab: 240, 2424 (gas), 2444 (gas), 300, 330, 340 (gas), 350, 404, 424 (gas), 444 (gas), and 504 (gas). Replaces: 506332M91, D9NN17365AA, D9NN17365AB, G45230, 150938R91, 363811R92, TO19144, 363811R92, 82847520, and D3NN17365F.
(Item #: 111009, Ref: D3NN17365C)
$12.00
Tachometer Cable
- For International / Farmall tractor models 424, 444, 2424, 2444 (all diesel), Replaces International OEM number 388524R91, Length: 37",
(Item #: 125008)
$47.00
Tachometer Cable Connector
- This new tachometer cable connector housing retainer clip (Thrust Stop) is used to retain part numbers 369695R1 (Tachometer Drive Assembly) and 369692R1 (Tachometer Cable Connector) into part number 363749R91 Distributor Housing Drive. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces: 369693R1.
(Item #: 150712, Ref: 369693R1)
$5.00
Tachometer Cable Connector Housing
- This New Tachometer Cable Connector Housing is used with 369695R1 Nylon gear with metal shaft. Will also need to order tach drive gear 369695R1 and 369693R1 clip for 300, 330, 350, 400, 450, 600, and 650 if replacing ALL NYLON gear/shaft drive. Fits Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces 369692R1
(Item #: 150711, Ref: 369692R1)
$55.00
Tachometer Connection Housing Plate
- Tachometer Connection Housing Plate with gasket. Used with part number 363749R91 distributor housing. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces: Plate: 363817R1, Gasket: 363814R1, 363814R2.
(Item #: 150709, Ref: 363817R1)
$10.90
Tachometer Drive Assembly
- This new Tachometer Drive Assembly is used with part number 363763R11 cast distributor mounting housing with provision for drive. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. For IH distributor systems only. This part does not replace all nylon style gear/shaft number 363816R1 that was original on 300, 330, 350, 400, 450, 600, 650, unless the connector housing part number 369692R1 is ordered along with the 369693R1 clip. Replaces: 369695R1, 369695R91.
(Item #: 150710, Ref: 369695R1)
$57.00
Tractormeter
- This New Proofmeter has a clockwise rotation. It is used on 424, 444, 2424, 2444. US Gas Models Only. Replaces 388893R91. We do not have a cable available for this gauge.
(Item #: 121654, Ref: 388893R9)
$72.00
Hitch / Drawbar
Leveling Box Assembly
- 19-1/4 inch minimum length, 24 inch maximum, spacing between forks is 1 inch. For tractor models (UK series, B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444, 434, 454, 385).
(Item #: 164849, Ref: 3069056R91)
$128.00
Leveling Link Assembly, Cat II
- This Leveling Link Assembly Cat II is for tractor models 574, 584, 585, 595, 674, 685, 695, 785, 884, Hydro 84. All with telescopic arm. Consists of: (1) A-527948 lift rod, (1) A-704207R3 swivel, (1) A-3069069R1 pin, (1) A-402635R4 housing, (1) A-527937R1 nut.
(Item #: 124553, Ref: 223319)
$91.00
Hydraulic System
Hydraulic Filter
- The 3044368R93 Hydraulic Sump Filter. fits CASE-IH B275, B414, 444, 354, 364, 384, 3414, 2424, 2444, 238. Uses a 0.139 inch Thk x 1.687 inch ID, Cl 5 O-ring not included Part Number 704348R1, available from dealer or O-ring kit. Tube OD 3/4 inch and ID 5/8 inch.
(Item #: 161565, Ref: 3044368R93)
$32.00
Hydraulic Lift Piston
- This is an O-ring type lift piston. It uses 381871R1 Piston O-Ring (not included). Used on B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444, 238. Verify OEM part number match. It has been reported that there was more than one type for these models.
(Item #: 183777, Ref: 3044376R92)
$62.00
Hydraulic Lift Piston O-Ring
- This O-Ring is used with 3044376R92 piston on International Models: B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444, 238. Replaces 381871R1
(Item #: 173006, Ref: 87111S95)
$1.00
Hydraulic Pump
- For tractor models 2404, 2424, 2444, 404, 424, 444, 240 (with Hydra-Touch System), 330 (with Engine Driven Hydro-Touch Power Supply), 340 (with Engine Driven Hydro-Touch Power Supply). Hydraulic Pump, 9 GPM, replaces 368633R92, 1949256C1, 368633R91.
(Item #: 104240, Ref: 376993R94)
$700.00
Hydraulic Pump
- 7.6 gpm. For tractor models 2300A, 2424, (2444 without power steering), 354, 364, 424, 444, B275, B414. All with diesel engines. Replaces 704330R95, 3072694R91
(Item #: 112637, Ref: 3072694R91)
$190.00
No
Picture
Hydraulic Pump
- For International / Farmall tractor models 404, 424, 444, 2404, 2424, 2444, Replaces International OEM number 381151R91, 80911C91, Additional Handling and Oversize Fees Apply To This Item,
(Item #: 169730)
$833.00
Hydraulic Pump Gear
- This New Hydraulic Pump Gear has 16 teeth. It Fits: C, Super A, Super A-1, Super AV-1, Super C, T340 (gas with 9 GPM side engine mounted pump), [ T4, T5 (gas with 9 GPM side engine mounted pump) ], 100, 130, 140, 200, 230, 240, [ 2424, 2444, 340, 424, 444 (GAS) ], 330, 404, Crawler: 500 (GAS with 9 GPM side engine mounted pump). Replaces: 350709R1.
(Item #: 121576, Ref: 350709R1)
$96.00
Hydraulic Pump Shaft Oil Seal
- This triple range lever oil seal has a .625 inch Inside Diameter, a 1.128 inch Outside Diameter and is .25 inch wide. It Fits: 114, 120, 14, 314, 320, 501, 502, 100, 130, 140, 200, 230, 240, 2424, 2444, 424, 444, 330, 340, 404, 660, 770, 780, A, C, Super A, Super C, T340, T340A. Replaces: 132707R91, 23676D, 3069986R91, 353183R91, 353183R92, 353183R93, 381369R91, 385038R91, 721-3011, 751086R91, 751087R91, 921-3011
(Item #: 178140, Ref: A26778)
$8.10
Vari Touch Hydraulic Valve O-Ring Kit
- Used on British Built tractor models: 276, 434, 444, B250, B275, B414, 354, 374, 384, 238, 364, 2300, 2424, 2444, 3434, 2350, 424. This set of 21 o-rings services the control valve.
(Item #: 183388, Ref: 3067990R91)
$3.60
Lights
Light Bulb, Sealed Beam, 12 Volt
- This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222.
(Item #: 111241, Ref: 373662R91)
$9.00
Light Switch, 12 Volt
- For tractor models (Cub serial number 224401 to 227700), (Cub Lo-Boy serial number 18701 to 21575), (140 from serial number 26801 and up), 1206, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, 354, 404, 424, 444, 454, 464, 504, 574, 606, 674, 706, 806, 1256, 2300, 2400A, 2404, 2424, 2444, 2500A, 2504, 2606, 21256, 3444, 4100, 4156, 403.
(Item #: 125705, Ref: 376851R91)
$29.60
Sealed Beam Bulb 12V
- Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521
(Item #: 111228, Ref: 70230252)
$13.70
Switch, Light
- Fits Cub (serial number 224401 >, Cub Lo-Boy (serial number 18701 >), Cub 154 Lo-Boy, Cub 185 Lo-Boy, 140 (serial number 26801 to 57723, with GENERATOR, 140 (serial number 57724 >, with ALTERNATOR), 184, 354, 4100, 4156, 444, 454, 464 (serial number < 109150), 574 (serial number < 114908), 674 (serial number < 108104), 2300, 2444, 2500 (serial number < 114908).376851R92
(Item #: 125705, Ref: 376851R91)
$29.60
Miscellaneous
No
Picture
Hydraulic Piston O-Riing
- For International / Farmall tractor models B275, B414, 238, 354, 364, 384, 424, 444, 2424, 2444, Replaces International OEM number 381871R1, For Hydraulic Lift Piston use Item #: 183777,
(Item #: 179335)
$3.90
Oil System
Oil Filter
- Oil filter element, cartridge type. Filter is 3.5 inches diameter with overall length of 5.5 inches. For gas engines: C113, C123, C135, C146, C152, C164, C169, C175. For 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 350, 404, 424, 444, 504, A, AV, B, BN, C, H, HV, Super AV, Super C, Super H, Super HV, Super W4, Super A, W4.
(Item #: 111120, Ref: 376374R91)
$13.50
Oil Filter
- BD144 and BD154 Diesel Engines. It is used on B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. Replaces 376364R91, 3043283R92, 3042419R92, 705747R91.
(Item #: 112177, Ref: 826137M91)
$10.20
Oil Filter
- For A, AV serial number 97398 and up, Super A, AV, B, BN serial number 97398 and up, Super C, 100, 130, 140, 200, 230, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504 (gas engines C113, C123, C135, C146, C153). Spin on type.
(Item #: 111134, Ref: 538836R1)
$11.00
Oil Filter Base
- This oil filter base and canister assembly is used on BD144 and BD154 engines. It uses 826137M91 filter. Used on 354, 364, 384, 3414, 2424, 2444, TD5, Early 500, 424, 434, 444, 464, B414, B275 Tractors. Replaces: 3042420R91, 3066851R91, 3069976R91, 3042425R1, 3043289R1, 3043291R1, 3043292R1, 3042428R1, 3043293R91, 3065965R1, 376364R91, 3043283R92, 3043315R1, 3042423R1, 3069975R91, 706592R1.
(Item #: 112372, Ref: 3042420R92)
$30.98
Oil Filter, Spin-On
- For tractors that have been converted from cartridge type to spin on oil filters.
(Item #: 118399, Ref: E7NN6714AA)
$13.40
Oil Pan
- This is the deep style oil pan. It is 7 inches deep. It is used on BD144, BD154 Engines. IH B275, B414, 424, 434, 444, 354, 364, 384, 3414, 2424, 2444, TD5, EARLY 500. Replaces 3064063R11.
(Item #: 158649, Ref: 3064063R11)
$71.00
Oil Pan Drain Plug
- White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Washer available as part number EBU6734A, not included. Replaces: 688067C1, 359875R1.
(Item #: 126591, Ref: C5NE6730B)
$8.10
Oil Pan Drain Plug Washer
- This washer is used with C5NE6730B 7/8 inch Oil Drain Plug.
(Item #: 140612, Ref: EBU6734A)
$1.80
Oil Pump, BD154 Engine
- Fits Late BD154 engine in: 2300A, 238, 2424, 2444, 3414, 3434, 3444, 354, 364, 374, 384, 424, 434, 444, B275, B276, B414, B434. This will not fit a 5 inch deep oil pan. This pump will work for a BD144 engine and early BD154 if you also replace the oil pan with a 7 inch deep pan (part number 3064063R11).
(Item #: 112139, Ref: 3064060R91)
$64.00
Oil Pump Drive Gear
- This Oil Pump Drive Gear fits: B-250, B-275, B-414, 2300A, 2444, 3414, 3444, 354, 434, 444, Forklift: 7000. For all models listed if they have the BC-144 gas engine. 10 teeth, 1.726 inch overall length. May have to re-drill hole in shaft for drive pin. Replaces: 3043830R1.
(Item #: 113283, Ref: 3043830R1)
$129.00
Spin On Oil Filter Adapter
- This Spin on Oil Filter Adapter Kit is for BD144 and BD154 Diesel engines. It is used on B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. Replaces 3066851R91, 3042420R91, FILTERKIT01. Uses replacement filter E7NN6714AA.
(Item #: 176310, Ref: 3042420R92SPIN)
$55.00
Spin-On Oil Filter Adapter Kit
- This Spin-On Oil Filter Adapter Kit Fits Gas and LP Engines in IH Combines: 105, 122, 140, 203, 62, 64, 76, 91, 93. Fits IH Industrial: 2404, 2444, 2504, Crawlers: 500, 500C, T340, T340A, T4, T4B, T5, T5B, T5C, Forklift: 4000, Power Units: U123, U2, U2A, UC135, UC135B, UC153, Rubber Tired Loaders: 3514, H30F, H30R, H50. Fits Tractors: C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504. Fits Balers: 55T, 55W, 56T, 56W, 57T, Carrier: 660, Hi-Clear Sprayers: 770, 780, Windrowers: 161, 163, 201, 210, 225, 230, 275, 375; Replaces: 538828R91, 63856D
(Item #: 184655, Ref: 538828R91KIT)
$153.00
PTO / Driveline
PTO Bearing
- This bearing measures 1.575 inches (40.005 mm) inside diameter, 3.150 inches (80.010 mm) outside diameter, and 0.709 inches (18.008 mm) wide. It replaces D83012, B18215, DANA070HD100, H437897, H4628S, H4625S, H4626S, H4627S, K3660223431, L33908, SBA326040030, P39642, ST215, 0000140211, 0040040, 1103566C91, 114085, 130029H1, 151901206, 190001311024, 190003311024, 190003313025, 192310210025, 1963034C1, 199012290707, 20915780, 2359180, 2521A415, 294714R91, 301164, 3146251R91, 325046C91, 339818X1, 340401140, 41618500, 47109308, 47110555, 47123219, S69425, 6208, 700524R91, 700526R91, 70066742, 700803429, 704772R91, 704772R92, 707805203, 713564R91, 80114085, 80301164, 81878507, 83962320, 87605894, 920096050, 9964942
(Item #: 111675, Ref: ST215)
$50.98
PTO Lever Bracket
- This PTO Lever Bracket is used on B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. Does not include seal part number 704393R91. Replaces 704392R1, 704392R21, 704392R3.
(Item #: 179366, Ref: 704392R1)
$41.00
PTO Plate, Remanufactured
- For International / Farmall tractor models B275, B414, 354, 364, 384, 424, 434, 444, 2300A, 2424, 2444, 3444, Compatible with Massey Ferguson tractor models F40, TO30, TO35, 35, 50, 65, 135, 150, 165, 175, 180, 202, 203, 204, 302, 304, 2135, 2200, 3165, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, Compatible with Massey Harris tractor models 50, 202, Clutch Size: 9", Clutch Hub: 1-3/4", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 4 Pads,
(Item #: 206096)
$74.01
PTO Retainer and Seal Assembly
- This PTO Retainer and Seal Assembly is used on B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. It Replaces 704387R12, 751115R92, 3063246R11, 3065217R91
(Item #: 179371, Ref: 704387R12)
$35.00
PTO SEAL RETAINER
- With seal. Does not come with gasket. For tractor models 2424, 2444, 384, 424, 444, B275, B414.
(Item #: 179432, Ref: 704387R11)
$13.50
PTO SHAFT
- This PTO shaft comes with a bearing and two collars. For tractor models B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. This shaft is 6 spline with 1 3/8 diameter, by 8 spline with a 1 1/2" Diameter. The length over all is 27 Inches. Replaces 751114R51, 3073111R91
(Item #: 178944, Ref: 3073111R91)
$123.00
PTO Shifter Internal Lever
- This PTO Shifter Internal Lever is used on B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. It replaces 751115R92, 3063246R11
(Item #: 179374, Ref: 3063246R11)
$25.00
PTO Shifter Seal
- This PTO Shifter Seal is used on B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. It replaces 704393R92, 704393R91
(Item #: 179377, Ref: 704393R91)
$9.50
SHIFT LEVER, PTO
- For tractor models B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. Will Not work on Tractors with Remote Hydraulics. Replaces OEM numbers 3064230R91, 3119812R91, 3119812R92.
(Item #: 179106, Ref: 3064230R91)
$26.40
Seats
Leaf Spring, Seat, LH
- For tractor models A, Super A, A1, Super A1, AV, Super AV, AV1, Super AV1, B, 100, 130, 140, 444, 2444.
(Item #: 109588, Ref: 50586DB)
$35.00
Leaf Spring, Seat, RH
- For tractor models A, Super A, A1, Super A1, AV, Super AV, AV1, Super AV1, B, 100, 130, 140, 444, 2444.
(Item #: 112485, Ref: 50587DB)
$35.00
Sheet Metal / Body Parts
Front Hang-On Weight Bracket
- This is a 10 hole bracket. There is 16 inch from center-to-center bolt holes. The overall length is 23-3/8 inch. For utility applications, must have existing 66253C1 cast bumper weight to bolt this to. Hydro 70, Hydro 84, Hydro 86, 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2424, 2444, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 385, 404, 424, 444, 460, 504, 544, 560, 656, 660, 664, 666, 686, 706, 756, 806, 826, 856, Following 2 wheel drive only: 784, 884, Following when equipped with 66253C1 cast bumper weight: 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500, 2500A, 2500B, 2505B, 2510B, 2514B, 454, 464, 484, 574, 584, 674, 684, will also fit the following models when using (2) 536041R1 spacers: 1066, 1466, 1468, 1566, 1568, 766, 966, Hydro 100. Replaces: 383389R11, 383389R21
(Item #: 152230, Ref: 383389R11)
$230.00
Steering
Bushing, Front Axle Pivot
- For International / Farmall tractor models 424, 444, 504, 606, 2424, 2444, 2504, 2606, 2656, Replaces International OEM number 379531R1, Front Axle Pivot Bushing,
(Item #: 104489)
$25.20
Front Pivot Bolster Bracket
- This Front Pivot Bolster Bracket Fits: 240, 2404, 2424, 2444, 404, 424, 444, all with swept back axles. Replaces: Pin: 368604R11, Casting Number: 369008R1, 369008R5
(Item #: 111926, Ref: 369008R5)
$268.00
Front Pivot Bolster Pin
- This Front Pivot Bolster Pin is 4-9/16 inches long with a 1-3/16 inch diameter. Fits: 240, 2404, 2424, 2444, 330, 340, 404, 424, 444. Replaces: 368604R11.
(Item #: 111655, Ref: 368604R11)
$75.00
Spindle Bushing
- For tractor models 200, 230, 240, 2400A, 2404, 2424, 2444, 404, 424, 444, 454, (464, 484 standard duty utility).
(Item #: 124589, Ref: 368621R1)
$25.20
No
Picture
Spindle Jam Nut
- For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2404, 2424, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 5088, 5288, 5488, 21026, 21206, 21256, 21456, Replaces International OEM number 427546, 1-3/8"-12,
(Item #: 100852)
$4.60
Spindle - Left or Right
- For tractor models 200, 230, 240, 2404, 2424, 2444, 404, 424, 444. Spindle - right or left. Vertical shaft is 8 inches long, 1.420 inches diameter.
(Item #: 100833, Ref: 371705R91)
$273.00
Spindle LH/RH
- Spindle has vertical shaft length of 11 inches and 1.42 inches in diameter. For 200, 230, 240, 2424, 2444, 404, 424, 444. The wheel bearing kit used for this spindle is part number WBKIH1.
(Item #: 100832, Ref: 373890R91)
$118.98
Spindle - Right Hand and Left Hand, Used
- For International tractor models 200, 230, 240, 404, 424, 444, 2424, 2444, Replaces International OEM number 373890R91, Right or Left Side, Can replace R49839 (102236) (style with press in hub cap), Dimension A: 11.00", Dimension B: 1.420", Dimension C: 1.250", Dimension D: .750", For a new version of this item use Item #: 100832, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.,
(Item #: 400832)
$122.01
Spindle - Right Hand and Left Hand, Used
- For International tractor models 200, 230, 240, 404, 424, 444, 2404, 2444, Replaces International OEM number 371705R91, Right or Left Side, Upright Length: 8.000", Upright Diameter: 1.420", Inner Bearing Diameter: 1.250", Outer Bearing Diameter: .750", For a new version of this item use Item #: 100833, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.,
(Item #: 400833)
$217.01
Stay Rod Cap
- For tractor models 2424, 2444, 384, 424, 444, B414. Replaces 842388R1.
(Item #: 179053, Ref: 3109613R1)
$14.00
Stay Rod Socket
- For tractor models 2424, 2444, 384, 424, 444, B414.
(Item #: 179669, Ref: 3043920R1)
$11.80
Steering Arm
- Center. For tractor models 424, 444, 504, 544, 606, 656, 2424, 2444, 2504, 2544, 2606, 2656.
(Item #: 100879, Ref: 379553R11)
$205.00
Steering Wheel
- With 7/8 inch splined hub. For tractor models 140, 350, 404, 424 without power steering, 444 without power steering, 450, W450, 460, 504, 560, 2404, 2424 without power steering, 2444 without power steering, 4100, 4156, 4166, 4186, Combines: 105, 203, 205 to serial number 1289. Steering wheel 17 3/8 inch diameter, 7/8 inch hub, for splined shaft. Does not come with center cap.
(Item #: 101431, Ref: 366557R2)
$44.00
Steering Wheel Nut
- This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646
(Item #: 126721, Ref: 35P51)
$7.60
Steering Worm Bearing Retainer
- This Worm Bearing Retainer is 2.1875 inches in diameter and has 12 right hand threads. For models 2404, 2424, 2444, 2504, A, AV, B, BN, C, H, HV, M, MD, MDV, MV, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 404, 424, 444, 450, 504.
(Item #: 173004, Ref: 6660DA)
$40.00
Thrust Bearing
- For tractor models 200, 230, 240, 2400A, 2404, 2424, 2444, 404, 424, 444, 454, (464, 484 standard duty utility).
(Item #: 114558, Ref: 365317R91)
$18.30
Tie Rod End
- A= 3.060 inch, B= .687 inch, 18 NF left hand thread. For tractor models (AV, AV1, A1, Super A, 100, 130, 140 all with fixed axles), (2404, 2424, 2444, 404, 444 all with heavy duty front axle).
(Item #: 104377, Ref: 356541R91)
$21.60
Tie Rod End
- For International / Farmall tractor models 404, 424, 444, 2404, 2424, 2444, Replaces International OEM number 379204R11, Dimension A: 16.875", Dimension B: .750,
(Item #: 104379)
$74.00
Tie Rod End
- For International / Farmall tractor models 424, 444, 2424, 2444, Replaces International OEM number 393228R11, Dimension A: 11.870", Dimension B: .750,
(Item #: 104380)
$49.00
Tie Rod End
- For International / Farmall tractor models 424, 444, 2424, 2444, Replaces International OEM number 399292R1, Dimension A: 14.250", Dimension B: .750,
(Item #: 104381)
$70.00
Wheels
Front Wheel Hub Cap, Used
- For International tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 404, 424, 444, 504, 2404, 2424, 2444, 2504, Compatible with International Combine(s) 403, Compatible with International Harvester(s) 720, 781, 830, 881, Replaces International OEM nos 49115D, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.,
(Item #: 432088)
$48.01
Rear Rim Bolt Kit
- This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 703929R1.
(Item #: 184824, Ref: 350719KIT)
$22.00
Wheel Bearing Kit
- Kit include the OEM numbers: LM67048 (Cone), LM7010 (Cup), LM11910 (Cup), LM11949 (Cone), 49116D (Gasket), 172532 (Seal), 49117D (Wear Sleeve). For 140, 200, 230, 240, 2404, 2424, 2444, 2504, 330, 340, 404, 424, 444.
(Item #: 100854, Ref: WBKIH1)
$25.30
No
Picture
Wheel Bearing Kit
- For 200, 230, 240, 2404, 2424, 2444, 404, 424, 444. Wheel Bearing Kit includes BEARINGg A-LM67048, BEARING A-LM67010, BEARING CUP A-LM11910, BEARING A-LM11949, GASKET A-49116D, SEAL A-172532, WEAR SLEEVE A-49117D
(Item #: 100854, Ref: WBKIH1)
$25.30
Wheel Bolt
- This wheel bolt fits the following tractor models: A, B, BN, Super A, 100, 130, 140, B-250, B-275, B-414, 1026, 1066, 1086, 1206, 1256, 140, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 240, 2404, 2424, 2444, 3088, 3288, 330, 340, 354, 364, 384, 404, 424, 444, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 444, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 240, 2404, 300, 330, 340, 3444, 350, 364, 384, 404, 424, 454, 460, 464, 484, 574, 584, 606, 674, 684, 784, 884, B-250, B-275, B-414, 300, 350, 354. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number 51485D.
(Item #: 108605, Ref: WB916)
$1.90
Wheel Hub, 6 Bolt, Front, Used
- For International tractor models 240, 330, 340, 404, 424, 444, 2404, 2424, 2444, Replaces International OEM nos 368626R11, Front, Bolts: 6, Diameter: 8", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.,
(Item #: 434080)
$163.01
Universal Parts and Accessories
Category: Accessories / Supplies
Accessories / Supplies
Auxiliary Heater, Universal
- This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions.
(Item #: 182644, Ref: MIS3127)
$388.00
Magnetic Block Heater
- Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle).
(Item #: 178758, Ref: MBH1153)
$100.55
Decals and Emblems
Decal, Fear This IH
- Black and red, 12-1/2 x 3-3/4. For all Models.
(Item #: 183484, Ref: S.67826)
$15.70
Decal, IH Block
- "IH" logo, 11 inches.
(Item #: 183564, Ref: R4682)
$17.20
Decal, IH Block
- "IH", 3 inch x 3 1/4 inch Block.
(Item #: 101094, Ref: R4681)
$6.60
Decal, IH Block
- "IH" logo, 1 3/4 inch.
(Item #: 183266, Ref: R4680)
$4.90
Decal, IH Block
- "IH", 1 1/4 inch Logo .
(Item #: 183058, Ref: R4679)
$3.80
Decal, IH Block
- "IH" logo, 7 inches printed on vinyl.
(Item #: 183292, Ref: R5171)
$25.50
Decal, IH Block
- "IH" logo, 8 inches printed on vinyl.
(Item #: 183123, Ref: R5172)
$31.00
Decal, IH Block
- "IH" logo, 10 inches.
(Item #: 183276, Ref: R5173)
$37.00
Decal, IH Block
- "IH" logo no background, 1 inch printed on vinyl.
(Item #: 183334, Ref: R5174)
$2.60
Decal, IH Block
- "IH" logo no background, 1-5/8 inches printed on vinyl.
(Item #: 183338, Ref: R5175)
$3.80
Decal, IH Block
- "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl.
(Item #: 183347, Ref: R5176)
$4.90
Decal, IH Block
- "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl.
(Item #: 183352, Ref: R5177)
$14.00
Decal, IH Block
- "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl.
(Item #: 183255, Ref: R5178)
$7.40
Decal, IH Block
- "IH" logo no background, 5-1/2" x 6" printed on vinyl.
(Item #: 183265, Ref: R5179)
$16.40
Decal, IH Block
- "IH" logo no background, 6-1/2 inch x 7 inch.
(Item #: 183547, Ref: R5180)
$12.30
Decal, IH Block
- "IH" logo no background, 7-1/2 inch x 8 inch.
(Item #: 183556, Ref: R5181)
$14.70
Decal, IH Block
- "IH" logo on silver background, 2 inch x 2-1/4 inch.
(Item #: 183560, Ref: R5182)
$14.00
Decal, IH Block
- "IH" logo no background, 10 inch x 11 inch.
(Item #: 183543, Ref: R5183)
$25.20
International Decal
- 8-1/2 inch long, white with black outline.
(Item #: 183068, Ref: R0679)
$9.30
International Decal
- 23 inches long, black block letters.
(Item #: 183477, Ref: R0680)
$12.30
International Decal
- 23 inches long, white with black outline.
(Item #: 183478, Ref: R0681)
$16.40
International Decal
- 26 inches long, black block letters.
(Item #: 183481, Ref: R0682)
$14.70
International Decal
- 26 inches long, white with black outline.
(Item #: 101032, Ref: R0683)
$14.90
International Decal
- 29 inches long, black block letters.
(Item #: 101030, Ref: R0684)
$11.20
International Decal
- 29 inches long, white with black outline.
(Item #: 101033, Ref: R0685)
$18.60
Electrical System
NOTE
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.
NOTE
No
Picture
Alternator, 12 Volt
- Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980.
(Item #: 111377, Ref: 8NE10305SE)
$90.00
Alternator Conversion Plug
- Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.
(Item #: 178026, Ref: ADR9209)
$13.40
Alternator Top Adjusting Bracket, Universal
- Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole.
(Item #: 173326, Ref: 8NL10302)
$25.20
No
Picture
Coil
- This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter.
(Item #: 182583, Ref: 28010)
$53.00
Distributor Cap, WICO
- For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat.
(Item #: 108299, Ref: X30042)
$62.15
Magneto, Wico XH and XHD, Service and Parts Manual
- Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts.
(Item #: 182504, Ref: MAG6)
$24.70
No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering.
(Item #: 179437, Ref: AL85)
$5.60
Spark Plug
- Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering.
(Item #: 182459, Ref: AL425)
$4.50
NOTE
Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE
Starter, Generator, Distributor Tag, 6 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers.
(Item #: 182608, Ref: DELCO6)
$15.80
Starter Solenoid
- This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic.
(Item #: 150223, Ref: DR1467)
$19.50
Tag for Starter/Generator, 12 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers.
(Item #: 182606, Ref: DELCO12)
$15.80
Voltage Regulator, 12 Volt
- 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957.
(Item #: 105581, Ref: 182548M92)
$28.00
Engine Gaskets
Silicone Blue RTV
- Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube.
(Item #: 178141, Ref: PRM77BR)
$10.60
Engine Parts
NOTE
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE
Engine Rings
NOTE
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").
NOTE
Exhaust System
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering.
(Item #: 118823, Ref: ZNL89020C)
$77.00
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering.
(Item #: 119038, Ref: ZNL89025C)
$105.00
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering.
(Item #: 114858, Ref: ZNL89051C)
$126.00
Chrome Exhaust Stack
- Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering.
(Item #: 173286, Ref: 146520CHR)
$108.00
Chrome Exhaust Stack
- Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering.
(Item #: 173287, Ref: 146490CHR)
$171.00
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering.
(Item #: 114945, Ref: ZNL89057C)
$150.00
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering.
(Item #: 119080, Ref: ZNL89485C)
$170.00
Chrome Exhaust Stack
- Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering.
(Item #: 173281, Ref: L102236CHR)
$89.00
Muffler Clamp, 1-1/4
- New Clamp for 1-1/4 inch outside diameter muffler inlet.
(Item #: 182682, Ref: MC114)
$3.78
Muffler Clamp, 1-3/4
- New Clamp for 1-3/4 inch outside diameter muffler inlet.
(Item #: 108866, Ref: MC134)
$4.80
Muffler Clamp, 1-3/8
- New Clamp for 1-3/8 inch outside diameter muffler inlet.
(Item #: 182687, Ref: MC138)
$2.80
Muffler Clamp, 2-1/4
- New Clamp for 2-1/4 inch outside diameter muffler inlet.
(Item #: 108870, Ref: MC214)
$4.58
Muffler Clamp, 2-3/4
- New Clamp for 2-3/4 inch outside diameter muffler inlet.
(Item #: 108872, Ref: MC234)
$8.71
Muffler Clamp, 3
- New Clamp for 3 inch outside diameter muffler inlet.
(Item #: 108873, Ref: MC300)
$7.00
Muffler Clamp, 3-1/2
- New Clamp for 3-1/2 inch outside diameter muffler inlet.
(Item #: 108874, Ref: MC312)
$7.40
Muffler Clamp, 4
- New Clamp for 4 inch outside diameter muffler inlet.
(Item #: 108875, Ref: MC400)
$8.40
Muffler Clamp, 5
- New Clamp for 5 inch outside diameter muffler inlet.
(Item #: 118841, Ref: MC500)
$14.30
Rain Cap
- This rain cap is for a 1.750 inch pipe.
(Item #: 108632, Ref: R1799)
$10.30
Rain Cap
- This rain cap is for a 2.0 inch pipe.
(Item #: 108633, Ref: R1800)
$9.00
Rain Cap
- This rain cap is for a 2.50 inch pipe.
(Item #: 108635, Ref: R1802)
$11.60
Rain Cap
- This rain cap is for a 2.750 inch pipe.
(Item #: 108636, Ref: R1804)
$11.40
Rain Cap
- This rain cap is for a 4.0 inch pipe.
(Item #: 108645, Ref: R1807)
$11.00
Rain Cap
- This rain cap is for a 4.50 inch pipe.
(Item #: 108749, Ref: WC14)
$14.30
Rain Cap
- This rain cap is for a 5.0 inch pipe.
(Item #: 108750, Ref: WC15)
$16.90
Stainless Steel Clamp, 2.75 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications.
(Item #: 179749, Ref: ZNL90872A)
$6.70
Stainless Steel Clamp, 4 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications.
(Item #: 185428, Ref: ZNL90875A)
$7.60
Fuel System / Air Intake
Air Cleaner Filler
- Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch.
(Item #: 151026, Ref: S.43231)
$12.00
Fuel Tank Screen
- This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length.
(Item #: 114940, Ref: R7949)
$9.40
Main Fuel Valve
- This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1
(Item #: 117537, Ref: 47404DASSY)
$27.00
Sediment Bowl Gasket, 2-1/8 inch
- For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA.
(Item #: 112364, Ref: C1778R)
$3.90
Gauges
No
Picture
Amp Gauge
- This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60.
(Item #: 178963, Ref: IHS1837)
$32.14
No
Picture
Hourmeter
- DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included.
(Item #: 178318, Ref: HM771)
$59.00
Hourmeter, Analog
- 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system.
(Item #: 178285, Ref: S.52672)
$41.00
Oil Gauge
- For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face.
(Item #: 110849, Ref: 41934DB)
$44.10
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass.
(Item #: 179540, Ref: 919095)
$14.90
Hitch / Drawbar
Conversion Tong
- Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length.
(Item #: 184153, Ref: FH1447)
$372.00
Conversion Tong
- Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length.
(Item #: 184167, Ref: FH1448)
$372.00
Conversion Tong
- Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length.
(Item #: 179611, Ref: FH14416)
$443.00
Conversion Tong
- Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length.
(Item #: 179008, Ref: FH14417)
$443.00
Hair Pin Assortment
- 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches).
(Item #: 182461, Ref: HPA15X)
$11.50
Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating.
(Item #: 112156, Ref: DBL2)
$37.00
Hydraulic System
Filter Element
- 25 Micron replacement element for SF1-25.
(Item #: 182541, Ref: 1A9023)
$25.70
Filter Element
- 10 Micron replacement element for SF1-10.
(Item #: 120092, Ref: 1A9021)
$15.20
Hydraulic Hose Assembly-NPT, 12 inch
- Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends.
(Item #: 118257, Ref: H42-2M-12)
$11.00
Hydraulic Hose Assembly-NPT, 180 inch
- Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends.
(Item #: 179906, Ref: H42-2M-180)
$55.50
Hydraulic Hose Assembly-NPT, 24 inch
- Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1.
(Item #: 118256, Ref: H42-2M-24)
$14.21
Hydraulic Hose Assembly-NPT, 30 inch
- Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends.
(Item #: 118259, Ref: H42-2M-30)
$16.10
Hydraulic Hose Assembly-NPT, 48 inch
- Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length
(Item #: 118261, Ref: H42-2M-48)
$16.50
Universal Pressure Gauge, Hydraulic
- 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting.
(Item #: 172285, Ref: GG1000)
$15.60
Universal Pressure Gauge, Hydraulic
- 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting.
(Item #: 172338, Ref: GG60)
$15.60
Implements
Axle Bolt
- Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36
(Item #: 170217, Ref: BH1317)
$15.50
Axle Bolt
- Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36
(Item #: 170217, Ref: BH1317)
$15.50
Bearing cone (L44643)
- For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.
(Item #: 114630, Ref: 22)
$5.30
Caster Assembly
- Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings.
(Item #: 173612, Ref: 12269)
$183.00
Caster Assembly, Old Style
- Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11).
(Item #: 161111, Ref: BH215)
$120.00
Hub Assembly
- Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel.
(Item #: 180514, Ref: 63813BH)
$39.00
Hub with Bearing Cups
- 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36.
(Item #: 182627, Ref: BH1311)
$50.00
No
Picture
Round Bale Tine 31.5 Inches
- Fully Hardened. Also replaces Kverneland 221151.
(Item #: 182589, Ref: 221129)
$52.00
No
Picture
Round Bale Tine 31.5 Inches
- Fully Hardened. Also replaces Kverneland 221151.
(Item #: 182589, Ref: 221129)
$52.00
No
Picture
Round Bale Tine 38.5 Inches
- Fully Hardened. Also replaces Kverneland 241107, 241161.
(Item #: 182592, Ref: 241100)
$91.48
No
Picture
Round Bale Tine 43 Inches
- Fully Hardened.
(Item #: 182594, Ref: 241166)
$111.54
No
Picture
Round Bale Tine 49 Inches
- Fully Hardened.
(Item #: 152690, Ref: 241162)
$94.00
No
Picture
Round Bale Tine 55 Inches
- Fully Hardened.
(Item #: 182593, Ref: 241163)
$131.61
Seal, Caster
- Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.
(Item #: 180300, Ref: 30BH)
$4.30
Tail Wheel Assembly
- 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8.
(Item #: 111222, Ref: 500BH)
$54.00
No
Picture
Talc Powder Lubricant
- Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres.
(Item #: 107928, Ref: TP19000TP)
$21.70
Lights
Headlight Assembly, Teardrop- 12 Volt
- Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering.
(Item #: 112414, Ref: 45640DB-12V)
$44.00
Headlight Assembly, Teardrop - 6 Volt
- Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering.
(Item #: 112415, Ref: 45640DB)
$44.00
Light Bulb, Sealed Beam, 6 Volt
- 4-1/2 inch number 4511.
(Item #: 111227, Ref: 373661R91)
$13.70
No
Picture
Sealed Beam Light
- 6 Volt
(Item #: 111938, Ref: R2712)
$42.00
No
Picture
Sealed Beam Light
- 12 Volt
(Item #: 122080, Ref: R2713)
$36.00
Switch, Light, with Knob
- Universal switch, for 6 volt tractors. Verify style is correct for your model.
(Item #: 114720, Ref: AA4667R)
$16.60
Miscellaneous
Cab Foam Kit
- With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size.
(Item #: 186987, Ref: R1236)
$390.00
Deluxe Canopy, 3 Bow
- This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch.
(Item #: 178876, Ref: RFC100B)
$245.00
Tractor Umbrella with Frame & Mounting Bracket - Red
- Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools,
(Item #: 161193)
$119.00
Paint
44 Minute DVD - How to Paint a Tractor
- This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed.
(Item #: 183950, Ref: JDV-02250)
$24.00
No
Picture
Paint, Aluminum High Heat Spray Can
- 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 100244, Ref: TP402HHSP_)
$8.50
No
Picture
Paint, Aluminum, Spray Can
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 100244, Ref: TP312SP)
$8.50
No
Picture
Paint, Clear Coat, 1 Gallon
- High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 108409, Ref: TP447GAL)
$70.00
No
Picture
Paint, Clear Coat, 1 Quart
- From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 108408, Ref: TP447QT)
$30.20
No
Picture
Paint, Farmall Red, 1 Gallon
- This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 101108, Ref: TP110GAL)
$53.00
No
Picture
Paint, Farmall Red, 1 Quart
- This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 101107, Ref: TP110QT)
$24.30
No
Picture
Paint, Gloss Black, 1 Gallon
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 100116, Ref: TP550GAL)
$56.00
No
Picture
Paint, Gloss Black, 1 Quart
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 100115, Ref: TP550QT)
$23.60
No
Picture
Paint, Gloss Black, Spray Can
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 100114, Ref: TP550SP)
$8.70
No
Picture
Paint, Gray Primer, 1 Quart
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 100121, Ref: TP2700QT)
$23.00
No
Picture
Paint, Gray Primer, Spray Can
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.
(Item #: 100120, Ref: TP2700SP)
$8.70
No
Picture
Paint, IH Blue, 1 Gallon
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 101114, Ref: TP910GAL)
$58.00
No
Picture
Paint, IH Blue, 1 Quart
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 101113, Ref: TP910QT)
$23.50
No
Picture
Paint, IH Blue, Spray Can
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 101112, Ref: TP910SP)
$9.40
No
Picture
Paint, IH Red, 1 Gallon
- This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 100722, Ref: TP905GAL)
$56.00
No
Picture
Paint, IH Red, 1 Quart
- This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 100721, Ref: TP905QT)
$23.50
No
Picture
Paint, IH Red, Spray Can
- This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 100720, Ref: TP905SP)
$8.50
No
Picture
Paint, McCormick Deering Gray, 1 Gallon
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 108401, Ref: TP450GAL)
$86.00
No
Picture
Paint, McCormick Deering Gray, 1 Quart
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 108400, Ref: TP450QT)
$36.00
No
Picture
Paint, McCormick Deering Gray, Spray Can
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 108399, Ref: TP450SP)
$12.50
No
Picture
Paint, Off White, 1 Gallon
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 101117, Ref: TP900GAL)
$60.00
No
Picture
Paint, Off White, 1 Quart
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 101116, Ref: TP900QT)
$22.60
No
Picture
Paint, Off White, Spray Can
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 101115, Ref: TP900SP)
$7.60
No
Picture
Paint, Red Primer, 1 Gallon
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 100119, Ref: TP3987GAL)
$60.00
No
Picture
Paint, Red Primer, 1 Quart
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 100118, Ref: TP3987QT)
$23.50
No
Picture
Paint, Satin Black, 1 Quart
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 100254, Ref: TP225QT)
$17.00
No
Picture
Paint, Satin Black, Spray Can
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 100253, Ref: TP225SP)
$7.90
No
Picture
Paint, Universal Non Glare Black, 1 Quart
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 100254, Ref: TP120QT)
$17.00
No
Picture
Paint, Universal, Non Glare Black, Spray Can
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 100253, Ref: TP120SP)
$7.90
No
Picture
Paint, Yellow Primer, 1 Gallon
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground.
(Item #: 184741, Ref: TP2720GAL)
$84.67
No
Picture
Slip Resistant Coating
- Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet.
(Item #: BL116GAL)
$68.39
No
Picture
Slip Resistant Coating Kit
- Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet.
(Item #: BL116KIT)
$99.22
Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE.
(Item #: 185598, Ref: E844R)
$45.00
PTO / Driveline
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering.
(Item #: 180775, Ref: AB4111WY)
$176.91
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING***
(Item #: 124815, Ref: AB4111K33)
$339.00
NOTE
PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.
NOTE
PTO Safety Clutch, 40 HP
- 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run.
(Item #: 183648, Ref: B9164)
$267.00
Seats
Seat, Air Suspension, Black Leatherette, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE ***
(Item #: TS5056V)
$1518.86
Seat, Air Suspension, Black Leatherette, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE ***
(Item #: TS5056V)
$1518.86
Seat, Air Suspension, Cloth, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE ***
(Item #: TS5056)
$2161.57
Tie-On Seat Cover
- Grey and Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only.
(Item #: 178995, Ref: R2599)
$44.00