Welcome! Please use the navigational links to explore our website.

FREE SHIPPING on orders above $249.99!   Details

PartsASAP Logo Company Logo
(800) 853-2651
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Case VAC Tractor Parts

[Categories]   [All Case Models]   [Print]  


Brakes
Case VAC Brake Band Lining Kit
Brake Band Lining Kit
- For Case tractor models VA (sn:5554999-later), VAC (with band type brakes), VO (sn:5554999-later), Replaces Case OEM number VTA3459, A30618, A30852, 17-7/8" Long, 1-11/16" Wide, 0.200" Thick, 1 band, order 2 for both sides, Brake Lining Kit With Rivets, (Item #: 152128) $35.30

Case VAC Brake Linings with Rivets
Brake Linings with Rivets
- Fits: S, SC, SC-3, SC-4, SI all using disc brakes. Fits VA, VAC using disc brakes, to serial number 5455000 and some serial number 5455000 to 5555000. Fits VAH using disc brakes, to serial number 5558747. Fits VAI, VAO using disc brakes, to serial number 5555000. Please note: if your lining is bonded instead of riveted you will have to drill rivet holes. Sold in pairs. These are 6 inch outside diameter and 2.140 inside diameter. They are .191 inches thick. The outside diameter of the rivet is .182 inch and the rivet hole diameter is .198 inch. Replaces: AM695T. (Item #: 126329, Ref: CKS1601) $39.10

Clutch
Case VAC Clutch Disc, 9, Organic
Clutch Disc, 9, Organic
- Clutch disc is 9 inches in diameter with 10 splines on a 1 1/8 inch hub. Used on models VA and VAC. Replaces: A30291, A44512, VTA12, VTA1650, VTA1651, VTA668, VTA909, VTA910. (Item #: 119397, Ref: A44512) $61.00

Case VAC Clutch Disc, Remanufactured, 71131472
Clutch Disc, Remanufactured, 71131472
- For Case tractor models VA, VAC, VAH, VAI, VAO, VC, Compatible with Case Combine (s) 600, 660, 960 Replaces Case OEM number 71131472, , Compatible with Gleaner Combine (s) E, Clutch Size: 9", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206657) $91.01

Case VAC Clutch Disc, Remanufactured, 71131472
Clutch Disc, Remanufactured, 71131472
- For Case tractor models VA, VAC, VAH, VAI, VAO, VC, Compatible with Case Combine (s) 600, 660, 960 Replaces Case OEM number 71131472, , Compatible with Gleaner Combine (s) E, Clutch Size: 9", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 4 Reg Pads, (Item #: 206658) $125.50

Case VAC Pilot Bushing
Pilot Bushing
- This is a Bushing, not a bearing. Please verify before ordering. Measures 0.815 Inch Outside Diameter, 0.625 Inch Inside diameter, and 1.000 Long. Serviceable: VT3370, A30024. You may have to shorten to 0.895 inch on some applications. (Item #: 155743, Ref: 251266R1) $7.00

No
Picture
Pressure Plate Assembly
- For Case tractor models V, VA, VAC, VAH, VAI, VAO, VC, Replaces Case OEM number A30576, Pressure Plate Size: 9", Pressure Plate Levers: 3, Pressure Plate Springs: 3, Pressure Plate Type: Single Stage, For a Remanufactured version of this sku use Item #: 206814, (Item #: 173451) $208.00

Case VAC Pressure Plate, Remanufactured
Pressure Plate, Remanufactured
- 9 inch, Single with open center. For tractor models VA, VAC. (Item #: 206814, Ref: A30576-R) $117.00

Cooling System
Case VAC Fan Belt
Fan Belt
- This Fan Belt measures 40.50 inches by 0.875 inches For tractor models V, VA, VAC, VC all without generator; R, RC. Replaces: O3782AB, Please verify measurements before ordering (Item #: 119093, Ref: 181636M1) $19.80

Case VAC Radiator
Radiator
- For VA, VAC, VAI, VAO. Replaces OEM part number VTA2688. (Item #: 101678, Ref: R4067) $407.00

Case VAC Water Pump
Water Pump
- For VA, VAC, VAE, VAH, VAI, VAO, VAS, W3, 310, 310C, 310D, 310E, 310F, 310G, 411, 413, 420, 420B, 420C, 425, 430, 441, 500B, 530, 600B, 630, all with gas engines. Water Pump without pulley. Replacement for casting #VT341, VT327, A28860. (Item #: 104193, Ref: G11956) $71.00

Case VAC Water Pump
Water Pump
- Less Pulley. Has 2-3/4" impeller diameter. For tractor models 200 gas, 200B 1959 and later, 300, 300B gas 1959 and later, 310, 311, 320, 320B, 400B 1959 and later, 420 gas, 420B, 420BD, 420C gas, 430, 431, 480B, 480C, 480CK, 500B 1959 and later, 530, 540, 580B gas, 580CK gas, 600, 600B, 660, VA 1948 and later, VAC 1948 and later. Replaces VT341, VT327, A28860, G11956. (Item #: 104193, Ref: A148401) $71.00

Decals and Emblems
Case VAC Case VAC Decal Set, Vinyl
Case VAC Decal Set, Vinyl
- For Case tractor model VAC, Mylar decal set use Item #: 100411, (Item #: 100370) $93.00

Case VAC Decal Set
Decal Set
- For the VAC. Give your VAC a new look with this set of 15 self adhesive decals. Includes two Case eagles standing on the world. These are printed on Mylar, not die cut. (Item #: 100411, Ref: R0763) $43.40

Drive Train
Case VAC Gear Shift Boot
Gear Shift Boot
- 1-3/4 inch bottom inside diameter, 5/8 inch hole diameter. For tractor models D, DC, DI, DO, S, SC, SI, SO, VA, VAC, VAH, VAI, VAO. Replaces O4867AB, O5920AB. (Item #: 107029, Ref: VT2017) $10.00

Case VAC Gear Shift Knob
Gear Shift Knob
- Plastic knob, 3/8 inch fine thread. For tractor models VAC, D, DC, S, SC, 200B, 300B, 320B, 400B, 420B, 420, 500B, 600B, 600, 700, 800, 900. (Item #: 109545, Ref: 03501AB) $4.20

Electrical System
Case VAC Distributor Cap, Autolite or Prestolite
Distributor Cap, Autolite or Prestolite
- This cap fits Autolite or Prestolite distributors ONLY, with 3-3/8 inch outside diameter, clip held cap. IAD-4010-A, IAD-4010-C, IAD-4020A, IAD-4020B, IAD-4023, IAD-4028-A, IAD-4043, IAD-6001-1B, IAD-6003-1A, IAD-6003-1B, IAD-6003-2A, IAD-6003-2F, IAD-6003-2J, IAD-6003-2K, IAD-6004-1C, IAD-6004-1D, IAD-6004-1E, IAD-6004-2D, IAD-6004-2E, IAD-6004-2G, IAD-6004-2H, IAD-6010-1. Note, it does not fit IGZ or IGW distributors. Replaces 1500831M91 or 15008310M91 or Replaces: IG1324, A8368, A8638, IG1324D, IG1324H, IG1324J, IG1324H, IG1324J, MX0510, 1500290M91, 1500831M91, IG-1324AD, IG1324AD, IG1324C (Item #: 105575, Ref: R2009) $17.10

Case VAC Distributor Rotor Button
Distributor Rotor Button
- This Rotor Fits AUTOLITE distributors with 3-3/8 inch outside diameter, clip held cap, including distributors: IAD-4010-A, IAD-4010-C, IAD-4020A, IAD-4020B, IAD-4023, IAD-4028-A, IAD-4043, IAD-6001-1B, IAD-6003-1A, IAD-6003-1B, IAD-6003-2A, IAD-6003-2F, IAD-6003-2J, IAD-6003-2K, IAD-6004-1C, IAD-6004-1D, IAD-6004-1E, IAD-6004-2D, IAD-6004-2E, IAD-6004-2G, IAD-6004-2H, IAD-6010-1. Note, it does not fit IGZ or IGW distributors. Replaces IG-1657R, IGS-1016B, A20416, A8369, IG1657R, T-7691, T7691, TGO-7746, TGO7746, 1500293M1, 1500293M91, 21A321, AV101088. (Item #: 112188, Ref: IG1657R) $7.20

Case VAC Electronic Ignition Conversion Kit - 12 V Negative Ground
Electronic Ignition Conversion Kit - 12 V Negative Ground
- Fits V, VA, VAC, VC, VI, VO All using Continental F-124 engine only using Prestolite distributor. Also fits 840 using Wisconsin VE4 or Owens A-125 engines with Autolite IGW-4159A distributor. Pertronix Electronic ignition conversion kit, replaces points and condenser with an electronic module. Used on 12 volt negative ground systems. (Item #: 182688, Ref: 1545) $135.00

Case VAC Electronic Ignition Conversion Kit, 12V Negative Ground
Electronic Ignition Conversion Kit, 12V Negative Ground
- 12 Volt NEGATIVE Ground. (Also available in 12 Volt POSITIVE, 6 Volt NEGATIVE and 6 Volt POSITIVE - CALL). For the following models using Autolite IAD-6003, IAD6003-2F and IAD6004 distributors. (VERIFY your distributor for match): VA, VAC, VAE, VAI, VAO, VAS, 150, 200, 200B, 210, 210B, 211B, 300, 302, 310, 320, 350B, 351, 400, 400B, 430, 440, 441, 450, 500, 530, 540, 540C, 541, 541C, 580CK, 600B, 640, 640C, 641, 641C, 650, 655, 675, 1150, 1155, 1255. Electronic Ignition Conversion Kit, replaces points and condenser with an electronic module. Use with 12 volt negative ground system. MUST ALSO REPLACE CAP (part number AL165) and ROTOR (part number AL150) both available from an auto parts store. (Item #: 105088, Ref: 1541) $140.00

Case VAC Electronic Ignition Conversion Kit - 6 Volt Positive Ground
Electronic Ignition Conversion Kit - 6 Volt Positive Ground
- Fits V, VA, VAC, VC, VI, VO All using Continental F-124 engine only using Autolite distributor. Also fits 840 using Wisconsin VE4 or Owens A-125 engines with Autolite IGW-4159A distributor. Pertronix Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 6 volt Positive ground system. (Item #: 183023, Ref: 1545P6) $166.00

Case VAC Generator - Prestolite Style (10218), Remanufactured, Prestolite, GHD6001
Generator - Prestolite Style (10218), Remanufactured, Prestolite, GHD6001
- For Case tractor models DC, S, SC, VA, VAC, VAH, VAI, Compatible with CockShutt / CO OP tractor models 20, 30, Compatible with International Hay Cutting (s) 201, Compatible with Massey Harris tractor models 21, 22, 23, 30, 33, 44, 55, Replaces Prestolite manufacturer number GHD6001, GHD6001A, GHD6001AB, GHD6001AB1, GHD6001AC, GHD6001Q, GHH6001SN, 45-24, Replaces manufacturer number 10218, 360-27, 92-06-1037, Prestolite Style, Voltage: 6, Rotation: Clockwise, Amperage: 19, Regulator: External, (Item #: 203529) $450.19

Case VAC Ignition Kit, Autolite Distributors
Ignition Kit, Autolite Distributors
- Kit contains Points, condenser, Rotor. Used with Autolite distributors ONLY, with 3-3/8 inch outside diameter, clip held cap. IAD-4010-A, IAD-4010-C, IAD-4020A, IAD-4020B, IAD-4023, IAD-4028-A, IAD-4043, IAD-6001-1B, IAD-6003-1A, IAD-6003-1B, IAD-6003-2A, IAD-6003-2F, IAD-6003-2J, IAD-6003-2K, IAD-6004-1C, IAD-6004-1D, IAD-6004-1E, IAD-6004-2D, IAD-6004-2E, IAD-6004-2G, IAD-6004-2H, IAD-6010-1. Note, it does not fit IGZ or IGW distributors. Replaces OEM #s: 1500293M1, 1508770M91, 1508810M91. (Item #: 105290, Ref: S.42933) $18.50

Case VAC Spark Plug Cover
Spark Plug Cover
- Primer finish. For tractor models VA, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAH, VAI, VAIW, VAIW-3, VAO, VAO-15, VAS. Replaces VT3217. (Item #: 126682, Ref: VT4348) $47.50

Case VAC Starter Drive
Starter Drive
- Fits Case V, VA, VAC Replaces OEM# MZ4072, MZ4114 (Item #: 107059, Ref: 565549) $32.50

Case VAC Starter Drive, Improved Style
Starter Drive, Improved Style
- This improved style starter drive is a positive ratchet style drive. For models V, VA, VAC replacing part numbers MZ4072, MZ4114. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Item #: 112575, Ref: 565549-New) $55.48

No
Picture
Starter - Prestolite Style (5428), Remanufactured, Prestolite, MZ4072
- For Case tractor models V, VAC, VAH, VAI, Compatible with Massey Harris tractor models 20, 21, 22, 23, 30, Replaces Prestolite manufacturer number MZ4072, MZ4114, Replaces manufacturer number 5428, 160-195, 91-06-1932, Prestolite Style, Voltage: 6, Rotation: Counter Clockwise, Teeth: 10, (Item #: 203497) $451.10

Case VAC Starter Switch
Starter Switch
- Fits the following series: D, DC, L, R, V, VC. Replaces: O4981AB, VT3588 (Item #: 105684, Ref: 9N11450A) $10.30

No
Picture
Wiring Harness
- Includes engine harness, light harness and instructions. For tractor models VA, VAC SN# 557000 and below with cutout relay. For 6 Volt generator systems w/ cut-out relay only. Cotton braided, exactly like original. Includes headlight, wires and wiring instructions. All terminals soldered and sealed. (Item #: 600463) $265.99

Engine Bearings
Case VAC Camshaft Bearings
Camshaft Bearings
- For tractor models VA, VAC, VAI, VAO, 200B, 300B, 310B, 410B, 411B, 420B, 310D, 310E, 430, 440, 441, 470, 480, 530. All with G148, 159 or Case 124 gas engines. Replaces A30346, A41225, VT3212, VT3213, VT3214, VTA2621 (Item #: 106070, Ref: 809590) $43.30

Case VAC Main Bearings - .010 inch Oversize - Set
Main Bearings - .010" Oversize - Set
- For Case tractor models VA, VAC, VAH, VAI, VAO, Compatible with Case Engine (s) G124, Bearing size: .010" oversize, Sold in complete sets, (Item #: 106063) $259.00

No
Picture
Rod Bearing
- Rod bearing in .010. 2 required sold individually, these 2 are used in positions 1 and 3 order CB-78P for positions 2 and 4. For tractor models V, VC, VI, VO all with continental 124 CID engine. The journal measures 1.926. Replaces VT3310, RP221219, and CB-79P-010. (Item #: 106057) $8.40

No
Picture
Rod Bearing
- Rod bearing in .020. 2 required sold individually, these 2 are used in positions 1 and 3 order CB-78P for positions 2 and 4. For tractor models V, VC, VI, VO all with continental 124 CID engine. The journal measures 1.916. Replaces G11143, VT3320, RP221221, and CB-79P-020. (Item #: 106058) $29.60

Case VAC Thrust Washer, Front
Thrust Washer, Front
- Used on Continental engines F140, G148, F162, F163, D202, DS202, PD202, DS6202, 124, VA124, VAE, G126, Z120, F124. This thrust washer replaces OEM numbers 15285A (Ferguson, Massey Harris), A30472 (Case), VT3376 (Case). Measures 2-9/32 inches inside diameter, 3-1/16 inches outside diameter, 3/32 inches thick. Measure before ordering. Some of the listed engines used more than one size. (Item #: 189167) $42.10

Engine Gaskets
Case VAC Complete Gasket Set
Complete Gasket Set
- Complete Overhaul Gasket Set (including crank seals) for 124 CID Gas Engine on VA Series: (VA, VAC, VAE, VAH, VAI, VAO, VAS) 1951-1954. (Item #: 106071, Ref: GK7519S) $139.00

No
Picture
Crankshaft Seal, Rear
- VA, VAC rear crank seal. (Item #: 106077, Ref: 49910) $10.00

Case VAC Head Gasket Set
Head Gasket Set
- For 124 CID Gas Engine on VA Series: (VA, VAC, VAE, VAH, VAI, VAO, VAS) 1951-1954. (Upper gasket set with head gasket). (Item #: 106073, Ref: VGK7519S) $97.00

Case VAC Oil Pan Gasket
Oil Pan Gasket
- For Case tractor models VA, VAC, VAH, VAI, VAO, Compatible with Case Engine (s) G124, Replaces Case OEM number A30440, VT3245, Oil Pan Gasket Only, (Item #: 106075) $19.70

Engine Rebuild Kits
Case VAC Engine Rebuild Kit - Less Bearings, G124
Engine Rebuild Kit - Less Bearings, G124
- For Case tractor models VA, VAC, VAH, VAI, VAO, Compatible with Case Engine (s) G124 (gas), Bore: 3.250", Model years 1942-1956, Kit includes: Pistons, Piston Ring Set, Liners, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106065, (Item #: 130544) $968.00

No
Picture
Valve Train Kit
- This Valve Train Kit is used in 124 4-Cylinder Case Engine. Contains 16 Valve keeper (lock): VT3234, 8 - Valve guide: VTA911, 4 - Intake valve: VT3232, VTA2634, 4 - Exhaust valve: VT3233, VTA2635, 8 - Valve spring: VT3372, A30025 (Item #: 120286, Ref: VTKCAVA) $254.00

Engine Parts
No
Picture
Crankshaft, Remanufactured, VT3201
- For Case tractor model VAC (gas), Replaces Casting number VT3201, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200111) $435.01

No
Picture
Crankshaft, Remanufactured, VT5200
- For Case tractor model VAC (gas), Replaces Casting number VT5200, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200112) $455.01

No
Picture
Flywheel Ring Gear
- For Case tractor models VAC, VAH, VAI, VAO, Replaces Case OEM number A30564, 96 Teeth, (Item #: 164576) $115.00

No
Picture
Lifter, Refaced
- Solid type. Sold individually. For tractor models VAC, 300, 320, 200, 430, 530, 630, 400B, 500B, 600B. (Item #: VT3236) $20.54

Case VAC Valve, Exhaust
Valve, Exhaust
- For 124 CID 4-Cylinder Gas engine on (1951-1954): VA, VAC, VAH, VAI, VAO, VAS. **SOLD IN SETS OF 4 ONLY (QTY ORDERED MUST BE AT LEAST 4) - PRICE SHOWN IS FOR 1 VALVE ** (Item #: 128627, Ref: VT3233) $21.80

Case VAC Valve Guide, Intake and Exhaust
Valve Guide, Intake and Exhaust
- Valve Guide for 124 CID 4-Cylinder Gas engine on (1951-1954): VA, VAC, VAH, VAI, VAO, VAS. For 148 CID Engine on 310, 320, 430, 440, 470. For 159 CID Engine on 530, 540, 570. Priced Each. Replaces 217-3673, VT131 (Item #: 107259, Ref: VT131) $5.20

Case VAC Valve, Intake
Valve, Intake
- For 124 CID 4-Cylinder Gas engine on (1951-1954): VA, VAC, VAH, VAI, VAO, VAS. **SOLD IN SETS OF 4 ONLY (QTY ORDERED MUST BE AT LEAST 4) - PRICE SHOWN IS FOR 1 VALVE ** (Item #: 128675, Ref: VT3232) $6.20

Case VAC Valve Key, Intake and Exhaust, 1\2
Valve Key, Intake and Exhaust, 1/2
- Sold per 1/2 valve, order 2 per valve. For 124 and 148 CID 4-Cylinder Gas Engine on (1951-1954): VA, VAC, VAH, VAI, VAO, VAS, 200B, 300B, 400B. Sixteen required per engine Replaces A30004, VT3234. (Item #: 107088, Ref: 7HA6518) $0.60

Case VAC Valve Spring, Intake and Exhaust
Valve Spring, Intake and Exhaust
- For 124 CID 4-Cylinder Gas engine on (1951-1954): VA, VAC, VAH, VAI, VAO, VAS. **SOLD IN SETS OF 4 ONLY (QTY ORDERED MUST BE AT LEAST 4) - PRICE SHOWN IS FOR 1 ** (Item #: 172566, Ref: VT3372) $5.60

Engine Pistons and Sleeves
No
Picture
Piston Pin Bushing
- For model s:, VAC, 300, 310 all with rod # VT4538 large O.D.. (Item #: 833442) $11.70

Case VAC Piston Pin Bushing
Piston Pin Bushing
- These Piston Pin Bushings are sold each. Measuring 1.066 outside diameter. For models, 200B, 210B, 211B, 300, 300B, 310, 310B, 311, 311B, 312, 312B, V, VA, VAC, VAE, VAH, VAI, VAO, VAS, VC, VI, VO. (Item #: 170178, Ref: 223-3429) $39.48

Case VAC Sleeve and Piston Kit
Sleeve and Piston Kit
- For 124 CID 4-Cylinder Gas engine on (1951-1954): VA, VAC, VAH, VAI, VAO, VAS. Overbore 3 1/4 inch to 3 7/16 inch. Contains: Sleeves, pistons, pins, retainers, ring set with top and bottom chrome rings. (Item #: 183809, Ref: PK257) $200.00

Case VAC Sleeve Seals, Pack of 2
Sleeve Seals, Pack of 2
- Pack of 2. O-ring for Piston Liner Sleeve. (NOTE: Sleeves usually use a minimum of 2 O-rings each). Used on Case Tractors with 124, 148 and 159 gas engines. Replaces original part numbers G46909, VT3375. (Item #: 128575, Ref: 1750000M1) $9.40

Engine Rings
No
Picture
Piston Rings
- 3-7/16" bore, 12 compression rings 3/32", 4 oil rings 3/16". For tractor models VA, VAC. NOT for use with chrome sleeve liners. (Item #: 1487271) $127.74

No
Picture
Piston Ring Set
- 3-1/4" diameter, 12 compression rings at 1/8", 4 oil rings at 1/4". For tractor models VA, VAC, VAC14, VAH, VAI, VAO, VAS, W, WI, WO. (Item #: 130045, Ref: 2C7751) $177.00

No
Picture
Piston Ring Set
- For 3 3/8 Bore, 3 Compression rings at 1/8 and 1 Oil ring at 1/4 per piston. For a set of 4 pistons or 1 engine. (Item #: 174381, Ref: 2C7536) $116.00

Case VAC Piston Ring Set, Overbore
Piston Ring Set, Overbore
- For 124 CID 4 Cylinder Gas. Ring set for 3-7/16 inch overbore. 3 at 3/32 inch, 1 at 3/16 inch. 1 set used in 124 CID 4 cylinder gas engine. For (1951-1954): VA, VAC, VAH, VAI, VAO, VAS. (Item #: PRS257) $65.58

No
Picture
Piston Ring Set, Standard Bore
- For 124 CID 4 Cylinder Gas. Original 3 1/4 inch bore. Size is STANDARD. Set has twelve 1/8 inch compressions rings and four 1/4 inch oil rings. Complete set for 1 engine. For (1951-1954): VA, VAC, VAH, VAI, VAO, VAS. (Item #: 130045, Ref: 1486604) $177.00

Exhaust System
Case VAC Exhaust Elbow
Exhaust Elbow
- For tractor models VA, VAC, VAH, and VAO (All engine SN: A4700001 and up with 2 piece manifold VT329_VT330). 1-1/2 Inch Offset. Replaces VT286 (Item #: 101497, Ref: VT286) $50.00

Case VAC Exhaust Elbow
Exhaust Elbow
- For tractor models VA, VAC, VAH with Continental Engine. 3 Inch Offset. Replaces OEM# VT200 (To ES #A4700000). (Item #: 101496, Ref: R2659) $53.00

Case VAC Exhaust Elbow Gasket
Exhaust Elbow Gasket
- This gasket is used as an exhaust Elbow Gasket and a Block off Plate Gasket. The mounting holes are 3 inches center to center. The center inside diameter is 1.750 inches. Replaces 1349111C1, G11201 (Item #: 178194, Ref: 1349111C1) $2.98

Case VAC Manifold Gasket Set
Manifold Gasket Set
- For tractor models V, VA, VAC, VAH, VAO, VC, VI, VO. (Item #: 101495, Ref: R0323G) $10.80

Case VAC Manifold, Intake and Exhaust
Manifold, Intake and Exhaust
- For tractor models VA, VAC, VAH, and VAO (All engine SN: A4700001 and up with 2 piece manifold). Replaces VT329 and VT330. Includes gaskets. Will not fit engines with 1 piece intake and exhaust manifolds. (Item #: 101494, Ref: VT329_VT330) $226.00

Case VAC Muffler, Vertical
Muffler, Vertical
- Inlet I.D. 1-15/16 inch (C) Outlet O.D. 2 inch (B) Overall length 29 inch Shell O.D. 3.25 inch. For (GAS): VA, VAC, VC, 200B, 300, 300B, 310 (utility), 350, 400, 500, 600. YTO-M81C. (Item #: 100262, Ref: M81C) $47.10

Fuel System / Air Intake
Case VAC Air Cleaner Cap
Air Cleaner Cap
- Fits Avery A, Case VA, VAC, VAI, VAO and VAH, INDUSTRIALS - 310, 310C, 310D, 310E, 310F, 320, 400B, 420, 420B, 420C and 500B, Replaces # A30532, VT3812, 135342. 1-13/16 inch inlet ID. (Item #: 126366, Ref: R4801) $55.00

Case VAC Air Cleaner Inlet Extension Pipe
Air Cleaner Inlet Extension Pipe
- Overall length 22-3/4", used with two piece manifold. For tractor models VA, VAC, VAH, VAI all SN# 4700000 and up. (Item #: 126378, Ref: VT4560) $42.85

Case VAC Air Cleaner Inlet Extension Pipe
Air Cleaner Inlet Extension Pipe
- For Case tractor models VA (sn:4700000-earlier), VAC (sn:4700000-earlier), VAH (sn:4700000-earlier), VAI (sn:4700000-earlier), Replaces Case OEM number VT3656, Pipe Length 20-1/4", I.D. Split End 1.770", O.D. 1.900", O.D. Smooth End 1.755", I.D. Smooth End 1.630, Used for One Piece Manifold., (Item #: 126377) $37.87

Case VAC Cable Clip for Marvel Schebler Carburetors
Cable Clip for Marvel Schebler Carburetors
- Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Case it is used For: [V, VA, VAC, VAI, VAIW, VAO, VAO-15, VAS, VC, VI, VO, 200B, 210B, 211B, 300B, 301B, 310B, 311, 311B, 312, 312B, 320B, 350, 351, 400B, 410B, 411B, 420B, 430, 440, 441, 445, 470, 530, 540, 541, 545, 570, 600B, 610B, 611B, 614B, 630, 632, 634, 640, 641, 642, 644, 730, 740, 741, 742, 743, 744, 830, 840, 841, 842, 843 (For choke cable bracket with Marvel Schebler carb # TSX42, TSX43, TSX74, TSX114, TSX212, TSX225, TSX253, TSX409, TSX474, TSX635, TSX710, TSX717, TSX749, TSX762, TSX785, TSX794, TSX798, TSX799, TSX804, TSX854, TSX936, TSX957SL, TSXU838) ], [310, 310B, 310C, 310D, 310E, 310F, 310G, 680CK, W5, W7, W9A (For choke cable bracket) ], Industrial; Skid steer: 1737 (For choke cable bracket); Replaces: 29-81, B51765 (Item #: 126116, Ref: CT29-81) $4.30

Case VAC Carburetor
Carburetor
- With reversible linkage. This Zenith carburetor outperforms the original carbs used on: VA series 1942-1956 VA/VAC (replaces TSX253 and TSX114 only on VA/VAC), 75 and 75 VA combine, Baler NAP-2, EXA124. Replaces TSX42, TSX43, TSX74, TSX94, TSX114, TSX253, TSX474, TSX653, TSX668, TSXU828, TSXU829, TSXU831, TSXU832. Center to center on the 2 mounting studs is 2 5/16 inches. Made in USA, 1 year warranty. (Item #: 100747, Ref: 12522) $480.00

Case VAC Carburetor
Carburetor
- With reversible linkage. This Zenith carburetor outperforms the original carbs used on: S, VA series (1942-56 that use TSX597 or TSX663 only), 200, 300, 300B, 310, 320 Crawler, 440, 480, 500, 600 Crawler, Replaces Marvel Schebler # TSX60, TSX85, TSX112, TSX90, TSX237, TSX338, TSX597, TSX603, TSX635, TSX663, TSX680, TSX694, TSX710, TSX804, TSX936, TSX936SL, TSX937, TSX937SL, TSX957SL Replaces Zenith #9667, 10432, 11080, 11535, 11544, 11580, 12544. Center to center on the 2 mounting bolts is 2 5/16 inches. Made in USA, 1 year warranty. (Item #: 100751, Ref: 14544) $507.00

Case VAC Carburetor
Carburetor
- Zenith Style aftermarket replacement for 12522 outperforms the original Marvel carburetors: TSX42, TSX43, TSX74, TSX94, TSX114, TSX253, TSX474, TSX653, TSX668, TSXU828, TSXU829, TSXU831, TSXU832. Linkage is reversible. This carburetor comes with studs which attach to the carburetor and will not work with those applications that the studs need to attach to the manifold. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. 1 year warranty. For models using the above listed carburetor numbers on models VA, VAC, VAI, VAO. (Item #: 185128, Ref: 12522B) $293.00

Case VAC Carburetor Float
Carburetor Float
- This carburetor float is 2.25 inches wide and is used for the following is used for the following tractor models: R, S, and VA series all using Zenith carburetor models: 10136, 9667, 11506, and 11106. (Item #: 108454, Ref: CTP28) $16.60

Case VAC Carburetor Float
Carburetor Float
- Zenith Carburetor Float Use w/ Zenith Carburetors: 11535, 11537, 11580, 11588, 11705, 11973, 12032, 12066, 12217, 12232, 12590, 12293, 12427, 12471, 12509, 12534, 12548, 12685, 12758, 12902, 12913, 12994, 13048, 13106, 13107, 13108, 13109, 13151, 13153, 13154, 13161, 13294, 13304, 13316, 13318, 13328, 13338, 13337, 13338, 13372, 13374, 13378, 13384, 13390, 13406, 13416, 13465, 13546, 13578, 13588, 13596, 13608, 13612, 13628, 13716, 13758, 13783, 13795, 13808, 13875, 13881, 13912, 13913, 13914, 13915, 13916, 13917, 13920, 13956, 14991, 14992, 14995, 14996, 14997, 14999. Replaces E1NN9550AA, 1508089M91, B51359, 70227103, 381027R1, 1K7630. (Item #: 108448, Ref: R4531) $24.50

Case VAC Carburetor Gasket Set
Carburetor Gasket Set
- 5-piece gasket kit is for small bowl Marvel Schebler carburetors. The overall length of the bowl gasket is 4-5/16 inch VAC, 300B, 430, VAC-11, VAC-12, VAC-13, VAC-14, VAIW, VAIW-3, VAO-15, VAS, VC, VAI, VA, VAH, VAO, 200B, 210B, 211B, 300, 310B, 311B, 470, 200, 210, 211, 311, 312, 312B, VAE, 351, 441, 445, 480 with the following carburetors: TSX112, TSX114, TSX212, TSX237, TSX253, TSX338, TSX42, TSX43, TSX474, TSX597, TSX60, TSX603, TSX635, TSX653, TSX663, TSX668, TSX680, TSX694, TSX696, TSX710, TSX74, TSX804, TSX85, TSX90, TSX936, TSX936SL, TSX937, TSX937SL, TSX94, TSX957SL, TSXU828, TSXU829, TSXU831, TSXU832, TSXU834 (Item #: 182465, Ref: 9N9502) $4.30

Case VAC Carburetor Kit, Basic
Carburetor Kit, Basic
- Kit for Marvel TSX635, TSX937SL, TSX937, TSX957SL, TSX804, TSX680, TSX936SL, TSX936, TSX42, TSX74, TSX43, TSX212, TSX663, TSX114, TSX253, TSX597 carbs used on 310B, 312B, 440, V, VC, VO, VI, VA, VAC, VAE, VAH, VAI, VAO, VAS. (Item #: 100733, Ref: MS101) $17.00

Case VAC Carburetor Kit, Basic
Carburetor Kit, Basic
- Kit for Zenith 10136, 7206, 9667, 11506, 11106 carbs used on D, R, RC, S, S80SK, SC, SE, SI, SO, STW16, VA, VAC, VAE, VAH, VAI, VAO, VAS. (Item #: 100738, Ref: Z101) $28.10

Case VAC Carburetor Kit, Basic
Carburetor Kit, Basic
- Fits Zenith carburetors 13339, 11532, 13876, 13863, 13714, 12708, 14987, 12825. For tractor models VA, VAC. (Item #: 186565, Ref: K2119) $39.30

Case VAC Carburetor Kit, Basic
Carburetor Kit, Basic
- Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 13876, 12522, 12522B, 14544 (Item #: 183586, Ref: BK44V) $28.30

Case VAC Carburetor Kit, Complete
Carburetor Kit, Complete
- For Marvel-Schebler # TSX597 - Includes Basic Kit, plus Fuel and Air Adjusting Screws and Jets. For tractor models VA and VAC. (Item #: 184711, Ref: R7835) $47.40

Case VAC Carburetor Kit, Complete
Carburetor Kit, Complete
- This Carburetor Kit contains the parts show. It is used to repair Marvel Schebler # TSX42, TSX43, TSX74 Carburetors.YTO-R2116 (Item #: 121879, Ref: R2116) $34.10

Case VAC Carburetor Kit, Comprehensive
Carburetor Kit, Comprehensive
- Comprehensive Carburetor Kit For Marvel-Schebler # TSX597. Includes all parts shown. For models VA and VAC. (Item #: 183816, Ref: R7836) $61.00

Case VAC Carburetor Kit, Comprehensive
Carburetor Kit, Comprehensive
- This Complete Carburetor Kit contains all the parts shown. It is used to repair Marvel Schebler # TSX114, TSX212, TSX253 (Item #: 121878, Ref: R0156) $35.40

Case VAC Carburetor, Rebuilt
Carburetor, Rebuilt
- This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX114, TSX253. For the following tractor models: VA, VAC. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203241, Ref: 1202-CARB) $332.01

Case VAC Carburetor, Rebuilt
Carburetor, Rebuilt
- This rebuilt carburetor is a direct replacement for OEM numbers matching: 11106. For the following tractor models: VAC. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203241, Ref: 1241-CARB) $332.01

Case VAC Fuel Cap
Fuel Cap
- Cap also doubles on many models as a radiator cap. For tractor models V, VA, VAC. Replaces G13271. Measures 2 7/8 inches outside diameter, 1 1/2 inches inside with two outward tabs measuring 1 7/8 inches outside of tag to outside of tab. (Item #: 154962, Ref: 760029M91) $16.40

Case VAC Fuel Sediment Bowl Bail Assembly
Fuel Sediment Bowl Bail Assembly
- This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Case VAC Fuel Sediment Bowl Gasket
Fuel Sediment Bowl Gasket
- Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number A11208. Gasket may be rubber or cork, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Case VAC Fuel Sediment Glass Bowl
Fuel Sediment Glass Bowl
- 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Will fit the following models using/ 1.280 inch long glass bowl: D, DC, DC-3, DC-4, DCS, DH, DI, DO, DV, S, SC, SC-3, SC-4, SI, SO, V, VA, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAH, VAIW-3, VAO, VAO-15, VAS, VC, VO, 200, 200B, 210B, 211B, 210, 211, 300, 300B, 310B, 311, 311B, 312, 312B, 400B, 410B, 411B, 420B, 430, 441, 470, 480, 500B, 510B, 511B, 530, 540, 541, 570, 600B, 610B, 611B, 614B. Replaces A11209 and 357958R1. (Item #: 105382, Ref: 9N9162) $3.20

Case VAC Sediment Bowl Assembly
Sediment Bowl Assembly
- For tractor models D, S, VA, VAC. Sediment Bowl Assembly - Small Bowl. Replaces 03990AB. May look slightly different than picture. (Item #: 105362, Ref: 910513) $22.50

Case VAC Sediment Bowl Gasket and Screen
Sediment Bowl Gasket and Screen
- This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: A11211, T7040 (Item #: 105364, Ref: 49923D) $3.50

Gauges
Case VAC Ammeter
Ammeter
- This Ammeter with a Case logo has a 2 inch diameter and fits C, CC, CC-3, CC-4, CCS, CH, CI, CO, D, DC, DC-3, DC-4, DCS, DEX, DH, DI, DO, DV, L, LA, LAI, LAIH, LAIM, R, RC, S, SC, SC-3, SC-4, SI, SO, Super 400, V, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAE, VAH, VAI, VAIW, VAIW-3, VAO, VAO-15, VC, VI, VO, 400, 401, 402, 403, 405, 410, 411, 412, 413, 414, 415, 420, 420C (Crawler), 425, 500, 520, 600, 610, 620. Replaces: O3601AB. (Item #: 121648, Ref: O3601AB) $29.30

Case VAC Oil Gauge Adapter Fitting
Oil Gauge Adapter Fitting
- This Oil Gauge Adapter Fitting is 1/8 inch NPT female to 3/16 inch tubing female. It is used on some gauges without removable fitting. (Item #: 178157, Ref: 9N18685) $4.80

Case VAC Oil Pressure Gauge
Oil Pressure Gauge
- For tractor models V, VA, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAH, VAI, VAIW, VAIW-3, VAO, VAO-15, VAS, VC, VI, VO, 200, 200B, 210, 210B, 211, 211B, (430, 430CK, 440, 441, 445 Gas up to serial number 8262799). Oil Pressure Gauge with Case logo 0-60 psi. Replaces VT2249 (Item #: 121649, Ref: VT2249) $33.00

Case VAC Oil Pressure Gauge
Oil Pressure Gauge
- For Case tractor models C, CC, D, DC, DC-3, DC-4, DCS, DH, DI, DO, DV, L, LA, LI, R, S, SC, SC-3, SC-4, SI, SO, VA, VAC, VAH, VAI, VAO, VC, VI, VO, 400, 410, 411, 412, 500, Compatible with Case Construction and industrial models W9, 420 (Loader/Backhoe), 600 (Skidder), Replaces Case OEM number 04370AB, A31169, VT2249, A14245H, Chrome Bezel, Case Logo on Face, Dash Mounted, For 2" Diameter Hole, 1/8" male pipe threads, 0-60 PSI, (Item #: 121647) $20.60

Case VAC Water Temperature Gauge
Water Temperature Gauge
- This water temperature gauge comes with a 60 inch lead for models DC, SC, VAC. Water Temp Gauge with Case logo. (Item #: 100295, Ref: VT2265) $30.10

Lights
Case VAC Headlight
Headlight
- This Headlight is 6 Volt with 5 inch mounting tube. For VA, VAC, VAH (To S#5400000) (R3998). For 12 volts application, order 151842 12 volt replacement bulb. (Item #: 105308, Ref: VT3660) $56.00

Case VAC Headlight Reflector
Headlight Reflector
- Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: DC, SC, VAC, DV, VAI, DI, DO, LA, S, SI, SO, VA, VAH with serial number up to 5400000, VAO, 400, 500, 700, 900. Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.00

Case VAC Light Switch
Light Switch
- light switch with cut out on generator for tractor models VA, VAC, VAH, VAI, VAO. Replaces VTA463 (Item #: 105312, Ref: 70208197) $25.80

Oil System
Case VAC Oil Filler Cap
Oil Filler Cap
- For tractor models VAC, 200, 300, 310, 320B, 420, 430, 500B, 530, 600B. Replaces A36608. (Item #: 110064, Ref: VT3545) $28.10

Case VAC Oil Filter
Oil Filter
- For tractor models VA, VAC, VAI, VAO, VAS, 200, 300, 301, 310, 311, 350D, 400, 500, 600 series with case engine, and other models, verify OEM Part Number. Replaces VT3589, and A36136. (Item #: 110866, Ref: 70240912) $22.80

Case VAC Oil Pan Drain Plug
Oil Pan Drain Plug
- White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. If washer is needed, order EBU6734A. Replaces VT4521. (Item #: 126591, Ref: C5NE6730B) $7.70

Case VAC Oil Pan Drain Plug Washer
Oil Pan Drain Plug Washer
- This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.60

PTO / Driveline
Case VAC PTO Drive Gear
PTO Drive Gear
- Fits; VA, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAE, VAH, VAI, VAIW, VAIW-3, VAO, VAO-15, VAS. Replaces: A29385, VT4022. 14 Teeth / 10 Splines (Item #: 111602, Ref: A29385) $35.50

No
Picture
PTO Drive Gear
- 14 Teeth For VAC. OEM# A29385 (Item #: 111602, Ref: R0601) $35.50

Case VAC PTO Driven Gear
PTO Driven Gear
- 38 teeth, 10 spline. For model VAC. Replaces VT4021. (Item #: 111603, Ref: A29384) $99.00

Case VAC PTO Shield
PTO Shield
- For tractor models D, DC, DH, DI, DO, DV, L (SN: 4200000 and up), LA, RC, S, SC, SI, SO, VA, VAC, VAH, VAIW, VAO, VAS, 200B, 210B, 211B, 300, 300B, 311, 312, 320, 350, 400B, 410B, 411B, 430, 351, 431, 441, 470, 480, 500, 500B, 530, 530CK, 531, 540, 541, 570, 580CK, 600B, 630, 631, 632, 640, 641, 900. Replaces O8303AB, B555AA, A27335, 2172AA. (Item #: 127027, Ref: A27335) $67.00

Case VAC PTO Shield Mounting Plate
PTO Shield Mounting Plate
- This plate is required for mounting a PTO shield to a Case VA, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAH, VAI, VAIW, VAO, VAO-15, VAS. It replaces original part number VT-2297, VT2297 (Item #: 127029, Ref: VT2297) $19.98

Case VAC PTO Shift Lever Housing Oil Seal
PTO Shift Lever Housing Oil Seal
- This PTO shift lever housing oil seal has a .625 inch Inside Diameter, a 1.128 inch Outside Diameter and is .25 inch wide. It Fits: 430, 430CK, 431, 435, 440, 441, 445, 470, 530, 530CK, 531, 535, 540, 541, 545, 570, 630, 631, 632, 634, 640, 641, 642, 644, 200B, 210B, 211B, 300, 300B, 301, 301B, 302, 302B, 310, 310B, 311, 311B, 312, 312B, 320B, 350B, 351, VA, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAI, VAIW, VAIW-3, VAO, VAO-15, VAS. Replaces: A26778, G105700, O4244AB (Item #: 178140, Ref: A26778) $7.80

Seats
Case VAC Seat Spring
Seat Spring
- This Seat Spring is used on VAC when equipped with optional easy ride seat. It Replaces original part number VTA3348 (Item #: 105356, Ref: 1K1854A) $37.80

Steering
Case VAC Steering Shaft Cross and Bearing (U-Joint)
Steering Shaft Cross and Bearing (U-Joint)
- Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some steering systems use more than one joint. Sold individually. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862, VTA3127 (Item #: 115351, Ref: 70224890) $11.30

Case VAC Steering Wheel
Steering Wheel
- This Steering Wheel measures 16 inch diameter, 7/8 inch to 1 inch tapered keyed hub, 3 steel spokes with a 5/8 dish. For tractor models V, VC, VI, VO, VA, VAC. (Item #: 101414, Ref: VT2230) $46.40

Case VAC Steering Wheel Nut
Steering Wheel Nut
- This steering wheel nut fits the following tractor models: D, DC, DC3, DC4, DCS, DEX, DH, DI, DO, DV, L, LA, S, SC, SI, SO, V, VA, VAC, VAE, VAH, VAI, VAO, VAS, VC, VI, VO, 1030, 1030CK, 930, 1031, 1032, 200, 200B, 210, 210B, 211B, 300, 300B, 310, 310B, 320, 320B, 400B, 410B, 420B, 430, 430CK, 440, 470, 530, 530CK, 540, 570, 500, 520, 600, 610, 620, 630, 640, 730, 830, 730CK, 740, 830CK, 840, 900, 930CK, 931, and 932. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 4291112, 352536R1, 25-1512 and 251512. (Item #: 157780, Ref: 353435X1) $0.60

Wheels
No
Picture
10" x 28" 5 Bump Rear Rim, Red
- For Case tractor models VA, VAC, VAO, VC, Replaces Case OEM number VT5570, Width: 10", Diameter: 28", Type: Bump, Bumps: 5, Rim Color: Red, (Item #: 103779) $340.00

Case VAC 10 inch x 34 inch Single Bevel Rear Rim, Flat Black
10" x 34" Single Bevel Rear Rim, Flat Black
- For Case tractor model VAC, Width: 10", Diameter: 34", Type: Single Bevel, Rim Color: Flat Black, (Item #: 104201) $351.00

Case VAC 8 inch x 32 inch Single Bevel Rear Rim, Flat Black
8" x 32" Single Bevel Rear Rim, Flat Black
- For Case tractor model VAC, Width: 8", Diameter: 32", Type: Single Bevel, Rim Color: Flat Black, (Item #: 104200) $342.00

No
Picture
9" x 28" 5 Bump Rear Rim
- For Case tractor model VAC, Width: 9", Diameter: 28", Type: Bump, Bumps: 5, Rim Color: Red, (Item #: 103778) $307.00



Accessories / Supplies
Case VAC Auxiliary Heater, Universal
Auxiliary Heater, Universal
- This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Case VAC Magnetic Block Heater
Magnetic Block Heater
- Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems
Case VAC Decal
Decal
- Case Eagle Decal, 2 inch. (Item #: 100513, Ref: R5170) $2.60

Case VAC Decal
Decal
- Case Eagle Decal, 1-1/4 inch printed on vinyl. (Item #: 183056, Ref: R5235) $2.50

Case VAC Decal
Decal
- Case Eagle Decal, 4 inch. (Item #: 100524, Ref: R1299) $5.20

Case VAC Decal
Decal
- Case Eagle Decal, 6 inch. (Item #: 100525, Ref: R1300) $6.90

Case VAC Decal
Decal
- Case Eagle Decal, 9 1/2 inch. (Item #: 100526, Ref: R1303) $8.60

Case VAC Draft-O-Matic Decals
Draft-O-Matic Decals
- Draft-O-Matic Decals, Round (Set of 2) - Vinyl Cut. Decal is used in association with any other listed decal set if you have a DRAFT-O-MATIC. (Item #: 100517, Ref: R2247) $25.70

Electrical System

NOTE
Alternator
- Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.
NOTE

No
Picture
Alternator, 12 Volt
- Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $98.00

Case VAC Alternator Conversion Plug
Alternator Conversion Plug
- Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $13.80

Case VAC Alternator Top Adjusting Bracket, Universal
Alternator Top Adjusting Bracket, Universal
- Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap
- This thermal battery wrap is used to keep your battery warm. It is 60 Watts and measures 28 inches long. (Item #: BTW28) $22.50

No
Picture
Battery Thermal Wrap
- 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil
- This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $53.00

Case VAC Magneto, Wico XH and XHD, Service and Parts Manual
Magneto, Wico XH and XHD, Service and Parts Manual
- Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Case VAC Spark Plug
Spark Plug
- Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

No
Picture
Spark Plug
- Standard tip, 14mm thread, 3/8" reach. Replaces Champion J17LM, Motorcraft A7CLM. NOTE: Verify spark plug type before ordering. (Item #: AL456) $2.40


NOTE
Starter
- Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE

Case VAC Starter, Generator, Distributor Tag, 6 Volt, Blank
Starter, Generator, Distributor Tag, 6 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.60

Case VAC Tag for Starter\Generator, 12 Volt, Blank
Tag for Starter/Generator, 12 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.60

Engine Gaskets
Case VAC Silicone Blue RTV
Silicone Blue RTV
- Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE
Valve Overhaul Kits
- Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE

Engine Rings

NOTE
Piston Ring Sets
- Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").
NOTE

Exhaust System
Case VAC Chrome Exhaust Stack
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Case VAC Chrome Exhaust Stack
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $106.00

Case VAC Chrome Exhaust Stack
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $134.00

Case VAC Chrome Exhaust Stack
Chrome Exhaust Stack
- Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $104.00

Case VAC Chrome Exhaust Stack
Chrome Exhaust Stack
- Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $166.00

Case VAC Chrome Exhaust Stack
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $149.00

Case VAC Chrome Exhaust Stack
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $173.00

Case VAC Chrome Exhaust Stack
Chrome Exhaust Stack
- Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

Case VAC Muffler Clamp, 1-1\4
Muffler Clamp, 1-1/4
- New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.78

Case VAC Muffler Clamp, 1-3\4
Muffler Clamp, 1-3/4
- New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

Case VAC Muffler Clamp, 1-3\8
Muffler Clamp, 1-3/8
- New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

Case VAC Muffler Clamp, 2-1\4
Muffler Clamp, 2-1/4
- New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

Case VAC Muffler Clamp, 2-3\4
Muffler Clamp, 2-3/4
- New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Case VAC Muffler Clamp, 3
Muffler Clamp, 3
- New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

Case VAC Muffler Clamp, 3-1\2
Muffler Clamp, 3-1/2
- New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Case VAC Muffler Clamp, 4
Muffler Clamp, 4
- New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Case VAC Muffler Clamp, 5
Muffler Clamp, 5
- New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Case VAC Rain Cap
Rain Cap
- Rain Caps are located in the EXHAUST category of the Accessories and Universal parts section.
NOTE

Case VAC Rain Cap
Rain Cap
- This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.40

Case VAC Rain Cap
Rain Cap
- This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Case VAC Rain Cap
Rain Cap
- This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Case VAC Rain Cap
Rain Cap
- This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Case VAC Rain Cap
Rain Cap
- This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Case VAC Rain Cap
Rain Cap
- This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Case VAC Rain Cap
Rain Cap
- This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Case VAC Stainless Steel Clamp, 2.75 Inch
Stainless Steel Clamp, 2.75 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Case VAC Stainless Steel Clamp, 4 Inch
Stainless Steel Clamp, 4 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.60

Fuel System / Air Intake
Case VAC Air Cleaner Filler
Air Cleaner Filler
- Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.30

Case VAC Carburetor Elbow and Strainer
Carburetor Elbow and Strainer
- Fits some Case models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $6.10

Case VAC Carburetor Float, Zenith
Carburetor Float, Zenith
- This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $16.60

Case VAC Fuel Tank Screen
Fuel Tank Screen
- This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Case VAC Sediment Bowl Gasket, 2-1\8 inch
Sediment Bowl Gasket, 2-1/8 inch
- For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.80

Gauges
No
Picture
Hourmeter
- DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Case VAC Hourmeter, Analog
Hourmeter, Analog
- 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $40.40

Case VAC Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar
Case VAC Eagle Hitch Leveling Knob, Rubber
Eagle Hitch Leveling Knob, Rubber
- For all models using Eagle Hitch. Replaces O4995AB. (Item #: 126108, Ref: A26845) $18.00

Case VAC Hair Pin Assortment
Hair Pin Assortment
- 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Case VAC Universal Drawbar Lock
Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $28.00

Hydraulic System
Case VAC Filter Element
Filter Element
- 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Case VAC Filter Element
Filter Element
- 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $11.20

No
Picture
Hydraulic Hose Assembly-NPT, 12 inch
- Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Case VAC Hydraulic Hose Assembly-NPT, 24 inch
Hydraulic Hose Assembly-NPT, 24 inch
- Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $13.50

Case VAC Hydraulic Hose Assembly-NPT, 30 inch
Hydraulic Hose Assembly-NPT, 30 inch
- Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Case VAC Hydraulic Hose Assembly-NPT, 48 inch
Hydraulic Hose Assembly-NPT, 48 inch
- Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Case VAC Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $14.90

Case VAC Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 160 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: GG160) $9.96

Case VAC Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 100 LB Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: GG100) $9.96

Case VAC Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $14.90

Implements
Case VAC Axle Bolt
Axle Bolt
- Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Case VAC Bearing cone (L44643)
Bearing cone (L44643)
- For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.50

Case VAC Caster Assembly
Caster Assembly
- Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $242.80

Case VAC Caster Assembly, Old Style
Caster Assembly, Old Style
- Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Case VAC Hub Assembly
Hub Assembly
- Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.60

Case VAC Hub with Bearing Cups
Hub with Bearing Cups
- 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.10

No
Picture
Round Bale Tine 31.5 Inches
- Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches
- Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches
- Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches
- Fully Hardened. (Item #: 152690, Ref: 241162) $97.00

No
Picture
Round Bale Tine 55 Inches
- Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Case VAC Seal, Caster
Seal, Caster
- Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Case VAC Tail Wheel Assembly
Tail Wheel Assembly
- 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant
- Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.70

No
Picture
Talc Powder Lubricant
- Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.70

Lights
Case VAC Light Switch with Knob
Light Switch with Knob
- Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Case VAC Portable Halogen Work Lamp
Portable Halogen Work Lamp
- 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Miscellaneous
Case VAC Deluxe Canopy, 3 Bow
Deluxe Canopy, 3 Bow
- This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Paint
Case VAC 44 Minute DVD - How to Paint a Tractor
44 Minute DVD - How to Paint a Tractor
- This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can
- 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Case Yellow, Gallon
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154618, Ref: TP160GAL) $105.00

No
Picture
Paint, Case Yellow, Quart
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154616, Ref: TP160QT) $42.30

No
Picture
Paint, Clear Coat, 1 Gallon
- From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $67.00

No
Picture
Paint, Clear Coat, 1 Quart
- High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.90

No
Picture
Paint, Desert Sand, 1 Gallon
- This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108139, Ref: TP130GAL) $114.00

No
Picture
Paint, Desert Sand, 1 Quart
- This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108138, Ref: TP130QT) $40.00

No
Picture
Paint, Desert Sand, Spray Can
- This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. Ensure you have correct color. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108137, Ref: TP130SP) $11.30

No
Picture
Paint, Gloss Black, 1 Gallon
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.40

No
Picture
Paint, Power White, 1 Gallon
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100348, Ref: TP271GAL) $61.00

No
Picture
Paint, Power White, 1 Quart
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100347, Ref: TP271QT) $23.30

No
Picture
Paint, Power White, Spray Can
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100346, Ref: TP271SP) $10.00

No
Picture
Paint, Red Primer, 1 Gallon
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $61.00

No
Picture
Paint, Red Primer, 1 Quart
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating
- Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit
- Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

PTO / Driveline
Case VAC Driveline Assembly with Yokes
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $172.00

Case VAC Driveline Assembly with Yokes
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00


NOTE
PTO Adapter
- PTO adapters are located under the PTO category in the Accessories and Universal Parts section.
NOTE

Case VAC PTO Safety Clutch, 40 HP
PTO Safety Clutch, 40 HP
- 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $274.00

Seats
Case VAC Seat, Air Suspension, Black Leatherette, Universal
Seat, Air Suspension, Black Leatherette, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Case VAC Seat, Air Suspension, Cloth, Universal
Seat, Air Suspension, Cloth, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Case VAC Universal Seat
Universal Seat
- Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts
Case VAC Cab Foam Kit Spray Adhesive
Cab Foam Kit Spray Adhesive
- 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Case VAC Pilot Punch Set
Pilot Punch Set
- Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering
Case VAC Eaton Power Steering Pump Replacement
Eaton Power Steering Pump Replacement
- This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $408.00

Case VAC Filter, Power Steering
Filter, Power Steering
- Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: A22279, A30834, A42242, G45307, K964615, O10582AB, K902187, K960750 (Item #: 111126, Ref: AE33538A) $12.30

Case VAC Power Steering Pump Pulley
Power Steering Pump Pulley
- This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.00

Tools
No
Picture
Blade Fuse Assortment
- With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester
- Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $313.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels
Case VAC Front Rim
Front Rim
- This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Case VAC Tire Inner Tube
Tire Inner Tube
- This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Case VAC Tire Paint, Black
Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

Case VAC Tire, Three Rib
Tire, Three Rib
- Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $103.00

Case VAC Tire Tube
Tire Tube
- For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.20

No
Picture
Tire Tube 24 Inch
- This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $50.00

No
Picture
Tire Tube 28 Inch
- This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $63.00

No
Picture
Tire Tube 28 Inch
- This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch
- This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $57.00

CategoriesAll VAC Parts
Manuals
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
Case VAC Manuals
VAC - Looks to work for all Serial Numbers - I&T Aftermarket Shop Manual 288 Pages (Part No: C-201) $29.95

VAC (Works for SN# 5770000 & Up) Service Manual 298 Pages (Part No: CA_VA SERIES_SV) $52.02

VAC Parts Manual 180 Pages (Part No: CA_VA_PT) $44.84

VAC 14 (Works for SN# 5770000 & Up) Service Manual 298 Pages (Part No: CA_VA SERIES_SV) $52.02

VAC - VA Series (VAC, VAH, VAO, VA) - With / Chicken Rooster Steering - NO Eagle Hitch (1942-1947) - Operators Manual 66 Pages (Part No: CA_VAC ERLY_OP) $38.99

VAC - VA Series - VAC , VAH , VAO , VA - With / Chicken Rooster Steering - NO Eagle Hitch (1948-1950) - Operators Manual 74 Pages (Part No: CA-O-VAC MID) $20.95

VAC - VA Series ( VAC,VAH,VAO,VA ) - Late / With Worm gear steering, with / eagle hitch - Operators Manual 109 Pages (Part No: CA_VA_OP) $38.99

Miscellaneous Related Items
Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

[Categories]   [All Case Models]   [Print]  







PayPal


Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2024 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy