FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Case 850 Tractor Parts

[Categories] [All Case Models] [Print]

Brakes

$Case 850 Brake Lining Kit, 1-3\4 inch$
Brake Lining Kit, 1-3/4 inch - Kit includes 4 linings and rivets. For tractor models 770, 780, 850, (Selectamatic 880 SN# 53001 and up), (Implematic 880, 890), 885, 950, 990, 995, 996, 1190, 1194, (1200 SN# 700001 and up), 1290, 1294, (990, 995, 996 heavy duty), 1210, 1212, 1390, 1394, (1490 less cab). (Item #: 168632, Ref: K262703) $67.00

$Case 850 Brake Lining Kit, 2-1\2 Inch$
Brake Lining Kit, 2-1/2 Inch - Kit includes 4 linings and rivets. For tractor models 770, 780, 850, (Selectamatic 880 SN# 53001 and up), (Implematic 880, 890), 885, 950, 990, 995, 996, 1190, 1194, (1200 SN# 700001 and up), 1290, 1294, (990, 995, 996 heavy duty), 1210, 1212, 1390, 1394, (1490 less cab). (Item #: 172832, Ref: K262704) $44.30

$Case 850 Brake Lining Kit, 3-1\2 inch$
Brake Lining Kit, 3-1/2 inch - Kit includes 4 linings and rivets. For tractor models 770, 780, 850, (Selectamatic 880 SN# 53001 and up), (Implematic 880, 890), 885, 950, 990, 995, 996, 1190, 1194, (1200 SN# 700001 and up), 1290, 1294, (990, 995, 996 heavy duty), 1210, 1212, 1390, 1394, (1490 less cab). (Item #: 168633, Ref: K262705) $68.00

Brake Master Cylinder - For Case Construction and industrial models 450 (after transmission SN 2644200), 450B, 455, 850, Replaces Case OEM number 241141A1, D39824, R43758, R55671, (Item #: 152197) $125.00

Cooling System

$Case 850 Fan \ Generator Belt$
Fan / Generator Belt - This Fan Belt measures 45.57 inches length and 0.453 inch width wedge belt. Direct replacement to A4897, A4897R, TX10276, 102752A, 303045080, K903050, 5088081. Please verify measurements before ordering (Item #: 168335, Ref: A4897R) $9.10

Water Pump Assembly - For tractor models 850, 880, 950 Implematic. (Item #: 121801, Ref: K961162) $72.00

Electrical System

Alternator - 12 volt, dust proof, 65 amp, less pulley. For tractor models 5120, 5130, 5140, 5150, (MX, MXM, MXU series models: 100, 110, 120, 135), 480CK, 480CK-E, 480CK-F, 580CK, 450C, 850D, 1150, 1150E, 1550, 1550C, 455, 855D, 1155E, 25x4, 360, 560, 760, DH4B, TF300. Replaces Bosch number 0120488205, 0120488293, 0120489475, 0986040290, AL9959X, Iskra number IA0595. (Item #: 112391, Ref: A187873) $122.00

Alternator - 24 volt, 50 amp. For tractor models 450C, 455 series, 850D, 855D, 1150, 1150E, 1155E, 1550, 1550C, 170C, 220B, 350, 488, 688, 888, 1088, 621, 721, 821, 921, W11B, W14C, W36. Replaces, Bosch # 0120488206, 0120489481, AL9940X, AL99487X, Iskra# IA0759. (AR) (Item #: 113371, Ref: A187916) $140.00

No
Picture
Alternator - 24 volt, 40 amp. For tractor models (850 1983-85 with 360 dsl), (1150 1983-88 with 451/504 dsl), (1450 1983-88 with 504 dsl). Replaces 1105510. (Item #: 156207, Ref: ADR0322) $162.00

Generator - 11 amp 22791/LRD 101. For selectamatic Models: 770, 780, 880, 850, 885, 950, 990, 995, 996, 1200, 1210, 1212. (Item #: 113578, Ref: K908882) $149.00

Generator - 12 volt, 22 amp. For David Brown Models: (770 1965-70 with 3-146 dsl), (780 1967-71 with 3-146 dsl), (850 1960-65 with 3-154 dsl), (880 1961-71 with 3-154 dsl), (990 1964-72 with 4-186 dsl), (1200, 1200 selectamatic 1967-71 with 4-219 dsl), (3800 1970-1971), 4600, (885 1972-1976), 885G, 995, 996, 1212, (1210 1973-1976). All Lucas equipped. Replaces 22758, 22703, 22733, 22791. Does not include pulley. (Item #: 116881, Ref: GLU0001) $100.00

Starter Motor, RH Mount - This starter is a right hand mount. It is 12 volts, 11 tooth gear, 2.2 KW, DD-Type M45 with 3 ears for mounting. For tractor models 770, 780, 850, 950, 990, 995, 996, 1200, 1210, 1212, 1290, 1294, 1390, 1394, 1410, 1412, 1490, 1494, 1594, 1690, 1690 Turbo, 1694. Replaces Lucas 26167, 26278, 27413. replaces OEM K262746, K262819, K89772, K954700, K957340 Will not replace 26301 left hand mount.K26274 (Item #: 113693, Ref: S.60360) $150.00

Voltage Regulator - For tractor models (selectamatic 770, 780, 880, 850, 885, 950, 990, 995, 996, 1200, 1210, 1212). (Item #: 172665, Ref: K908901) $59.00

Engine Bearings

No
Picture
Rod Bearing, STD - Price is for Bearings for 1 Rod. For tractor models 1000, 1010, 1030, 1060, 1070, 1090, 1150, 1150B, 1150C, 1160, 1170, 1175, 1200, 1270, 2290, 2294, 700B, 730, 740, (750 SN# 7070351 and below), 770 4 cylinder 800B, 830, 850, 930, 970, (Super 400 diesel SN# 8106131 and up), W10, W10E, W12, W18, W20, W7, W7C, W8, W8E, W9, W9A, W9E. (Item #: 106114, Ref: A43173) $17.70

Engine Gaskets

Front Crankshaft Seal - This front crankshaft oil seal has a 2.625 inch Inside Diameter, a 3.628 inch Outside Diameter and is .433 inch wide. Replaces: A157044, A23433, A24715, A27838, A40349, A57342, A62049, O3866AB, O8583AB, O9708AB, T34263 (Item #: 106145, Ref: A57342) $9.60

Head Gasket Set - For Case Construction and industrial models W7E, 475, 680C, 680CK (s/n 910600 - 9111008), 850, Compatible with Case Engine (s) 301BD, Replaces Case OEM number A42891, A189549, (Item #: 166750) $219.00

Engine Rebuild Kits

Engine Rebuild Kit - Less Bearings, D301B - For Case Construction and industrial models W7E, 475, 680C, 850 (s/n 7073468-later), Compatible with Case Engine (s) D301B (diesel), Bore: 4.375", Combustion bowl piston, Direct injection, 1.50" piston pin, Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For .156" Thrust Washer Set use Item #: 106127, (Item #: 130567) $858.00

Engine Parts

Camshaft - This Camshaft has applications is a number of Case Diesel Engines. Replaces original part numbers A66742, A62733 (Item #: 160899, Ref: DA66742) $413.00

No
Picture
Crankshaft - For Case tractor models 680CK, 730, 830, 850, Replaces Case IH OEM number A22578, A166001, 010700, 966772, Compatible with Case tractor models 750, No gear, small main, bolt-on style center gear not included, (Item #: 185375) $847.00

Engine Pistons and Sleeves

Cylinder Kit, For a Single Piston - 4 3/8 Bore with 1.50 Pin Diameter For 830, 840, 1030, 1200, W7, W7C, 750, 850 with D301, D451 Diesel Engine. Replaces A42828, A41363, A42995 (Item #: 166748, Ref: R3326) $250.00

No
Picture
Piston Sleeve Kit - For 1 Cylinder. Contains: Piston, rings, liner. Fits tractor models: 1000, 1010, 1030, 1060, 1150B, 1160, 1200, (750 SN# 7070351 and below), 830, 850, W12, W7, W7C, W9A, 840. (Item #: 166748, Ref: SK438) $250.00

Exhaust System

Exhaust Flange Gasket - This Exhaust Flange Gasket is used with K928275 and K952969 Exhaust Flanges. Used on 580, 1200, 1210, 1212, 1290, 1294, 1390, 1594, 1690 Turbo, 1694, 850, 880, 880 Implematic, 900, 950, 990, 990 Implematic, 995, 996. Replaces K957520, K68327 (Item #: 180166, Ref: S.57571) $3.30

Muffler - 13 inch inlet length, 1-5/8 inch inlet I.D. 17 inch shell length, 3-1/2 inch outlet length, 1-3/4 inch outlet O.D., 34 inch overall length. . For tractor models (implematic 850, 880, 950), (selectamatic 990). Replaces K917634. (Item #: 100564, Ref: K905166) $42.80

Fuel System / Air Intake

Fuel Lift Pump - For on a variety of Case models. It replaces original part numbers 2830122, 2830266, 84268475 (Item #: 125038, Ref: 84268475) $37.30

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number A11208. Gasket may be rubber or cork, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.70

Injector Nozzle - For tractor models (850, 880, 950 Implematic), (950A Implematic SN# 43671 and below with AD4/47A engine), (950B Implematic SN# 36676 and below with AD4/47B. Replaces K962744. (Item #: 182780, Ref: K902103) $59.00

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: A11211, T7040 (Item #: 105364, Ref: 49923D) $3.50

Gauges

Oil Pressure Switch - This Oil Pressure Switch (Sender) is used on 1190, 1194, 1200, 1210, 1212, 1290, 1294, 1390, 1394, 1410, 1412, 1490, 1494, 1594, 1690, 1690 Turbo, 1694, 770, 780, 850, 880, 885, 890, 950, 990, 995, 996. This part has a spade terminal. Some models have a threaded terminal and you will have to change the terminal end on your wire. Replaces K262933, K311686, 82847703, K903851 (Item #: 151007, Ref: K262933) $9.50

Hydraulic System

Bushing Boom Dipper Bucket - For Case Construction and industrial models W11, W11B, W24, W24B, W24C, W30, 26, 310, 310G, 350, 480C, 480CK, 480D, 480E, 480F, 570LXT, 580C, 580D, 580K, 580L, 580M, 580SD, 580SE, 580SK, 580 Super M, 590, 590 Super L, 590 Super M, 680CK, 680E, 680G, 680H, 680K, 680L, 750, 850, 850B, 850C, 850D, 850E, 855C, 855D, 855E, 1150, Replaces Case OEM number D30933, 1-1/2" ID, 1-7/8" OD, 1-1/4" Long, (Item #: 154383) $13.90

Hydraulic Seal Kit - Angle Cylinder - For Case Construction and industrial models 650G, 650K, 750H, 750K, 850, 850K, Replaces Case OEM number 250741A1, Rod: 1-3/4", Bore: 3-1/2", (Item #: 152995) $70.00

No
Picture
Hydraulic Seal Kit - Angle Cylinder - For Case Construction and industrial models 750K, 850, Replaces Case OEM number D37360, Rod: 1-1/2", Bore: 2-1/2", (Item #: 153050) $16.00

No
Picture
Hydraulic Seal Kit - Backhoe Cylinder - For Case Construction and industrial models W7, W7C, W7E, W9, W9A, W9B, W9C, W9E, W10, W10B, W10C, W10E, W18, W20, W20B, W24, W24B, 26, 310G, 450, 580, 680B, 680C, 750, 780, 850, 1150, Replaces Case OEM number G32299, Rod: 2", Bore: 4", (Item #: 153670) $57.00

Hydraulic Seal Kit - Backhoe Cylinder - For Case Construction and industrial models W3, W7, W7C, W7E, W24, 310, 310E, 310F, 310G, 350, 430, 450, 480, 480B, 530, 580, 680B, 680CK, 750, 850, Replaces Case OEM number G33151, (Item #: 153671) $26.70

No
Picture
Hydraulic Seal Kit - Backhoe Dipper Cylinder - For Case Construction and industrial models 480, 480D, 480E, 480F, 580, 580D, 850, 855E, Replaces Case OEM number 1543294C1, Rod: 2-1/2", Bore: 3-1/2", (Item #: 153666) $39.60

No
Picture
Hydraulic Seal Kit - Backhoe Loader Cylinder - For Case Construction and industrial models 310, 450, 580, 680, 750K, 780B, 780C, 780D, 850, 1150, Replaces Case OEM number 1543276C1, (Item #: 153071) $78.00

Hydraulic Seal Kit - Backhoe Stabilizer Cylinder - For Case Construction and industrial models W7, W9, W10, 310, 350, 450, 480, 530, 580, 850, 1150, Replaces Case OEM number G105518, Rod: 1-3/4", Bore: 3-1/2", (Item #: 153673) $42.90

No
Picture
Hydraulic Seal Kit - Boom Bucket Cylinder - For Case Construction and industrial models 450, 680, 680E, 780B, 850, Replaces Case OEM number G105560, Rod: 2-1/2", Bore: 4-1/2", (Item #: 153003) $35.00

No
Picture
Hydraulic Seal Kit - Boom Cylinder - For Case Construction and industrial models W7, W9, W10, 310, 450, 580, 680, 750K, 850, 1150, Replaces Case OEM number D42878, Rod: 2-1/4", (Item #: 152928) $18.00

Hydraulic Seal Kit - Boom Cylinder - For Case Construction and industrial models 350, 450, 455, 455C, 480, 480D, 480E, 480F, 550, 580, 850, 855E, Replaces Case OEM number 1543264C1, Rod: 1-3/4", Bore: 4", (Item #: 153661) $33.00

Hydraulic Seal Kit - Boom Tilt Cylinder - For Case Construction and industrial models 680, 850, 1150, Replaces Case OEM number G32696, Rod: 2-1/4", Bore: 5", (Item #: 153093) $102.00

No
Picture
Hydraulic Seal Kit - Bucket Cylinder - For Case Construction and industrial models W7, W9, W10, 680, 680CK, 850, 1150, Replaces Case OEM number D42877, Rod: 2-1/4", (Item #: 153001) $14.60

Hydraulic Seal Kit - Bucket Cylinder - For Case Construction and industrial models W14, 480D, 580, 580D, 580SD, 580SE, 850, 855E, Replaces Case OEM number G109504, Rod: 2-1/2", Bore: 3-12, (Item #: 153055) $30.00

Hydraulic Seal Kit - Bucket Cylinder - For Case Construction and industrial models W7, W9, W10, W14, 310, 350, 450, 480, 480B, 480C, 680, 680E, 780B, 780C, 780D, 850, 1150, Replaces Case OEM number G34636, Rod: 2-1/2", Bore: 4", (Item #: 153164) $49.70

No
Picture
Hydraulic Seal Kit - Lift Cylinder - For Case Construction and industrial models 780B, 780C, 780D, 850, 1150, Replaces Case OEM number G105508, (Item #: 153300) $40.90

Hydraulic Seal Kit - Lift Cylinder - For Case Construction and industrial models 26, 450, 475, 680B, 680C, 680E, 850, Replaces Case OEM number G109455, Rod: 2", Bore: 3-1/2", (Item #: 153648) $59.00

Hydraulic Seal Kit - Lift Tilt Cylinder - For Case Construction and industrial models 310E, 450, 530, 680B, 680CK, 750, 850, Replaces Case OEM number D42876, Rod: 2", (Item #: 152866) $19.10

No
Picture
Hydraulic Seal Kit - Lift Tilt Cylinder - For Case Construction and industrial models 450, 680C, 680E, 850, Replaces Case OEM number G105521, Rod: 2", Bore: 3-1/2", (Item #: 153002) $43.20

No
Picture
Hydraulic Seal Kit - Loader Bucket Tilt Cylinder - For Case Construction and industrial models W24B, W24C, 350, 350B, 450, 450B, 450C, 455B, 455C, 580B, 580C, 580F, 680C, 680E, 680G, 680H, 780B, 850, 850B, 850C, 855C, Replaces Case OEM number G105548, Rod: 1-1/2", Bore: 3", (Item #: 152929) $27.90

Hydraulic Seal Kit - Loader Dozer Cylinder - For Case Construction and industrial models W3, W24, 310E, 310F, 310G, 350, 430, 450, 480, 480B, 530, 750, 850, Replaces Case OEM number D42870, Rod: 1-1/2", (Item #: 152874) $21.80

Hydraulic Seal Kit - Ripper Cylinder - For Case Construction and industrial models W30, 450, 450B, 450C, 455B, 455C, 580B, 580C, 580F, 850, 850B, 850C, 855C, Replaces Case OEM number G105547, Rod: 1-3/4", Bore: 3-1/4", (Item #: 153052) $23.90

Hydraulic Seal Kit - Stabilizer Cylinder - For Case Construction and industrial models 680, 680CK, 680E, 680G, 680H, 850, 855E, 1150, Replaces Case OEM number G105525, Rod: 2", Bore: 4-1/2", (Item #: 153051) $64.00

No
Picture
Hydraulic Seal Kit - Swing Cylinder - For Case Construction and industrial models 680, 850, 1150, Replaces Case OEM number G32695, Rod: 2", Bore: 4-1/2", (Item #: 153309) $85.00

No
Picture
Hydraulic Seal Kit - Swing Ripper Cylinder - For Case Construction and industrial models 580, 850, Replaces Case OEM number G34626, Rod: 1-3/4", Bore: 4", (Item #: 153311) $46.90

Hydraulic Seal Kit - Tilt Cylinder - For Case Construction and industrial models W24, W24C, 680E, 680G, 680H, 780B, 780C, 780D, 850, 1150, Replaces Case OEM number G105513, (Item #: 152912) $79.00

Hydraulic Seal Kit - Tilt Cylinder - For Case Construction and industrial models W7, W9, W10, W14, W30, W36, 310, 450, 580, 680, 750K, 780B, 780C, 780D, 850, 1150, 1155D, 1450, Replaces Case OEM number G105520, Rod: 2-1/4", Bore: 4-1/2", (Item #: 152959) $84.00

No
Picture
Hydraulic Seal Kit - Tilt Cylinder - For Case Construction and industrial models W8, W9, W10, 780B, 780C, 780D, 850, Replaces Case OEM number G32228, (Item #: 153057) $43.50

No
Picture
Hydraulic Seal Kit - Tilt Cylinder - For Case Construction and industrial models 350, 450, 455, 455C, 580, 850, 855E, Replaces Case OEM number G105552, (Item #: 153302) $27.00

Hydraulic Seal Kit - Tilt Cylinder - For Case Construction and industrial models W36, 310, 450, 580, 580B, 680, 680CK, 680E, 780B, 780C, 780D, 850, Replaces Case OEM number G105517, Rod: 2", Bore: 4", (Item #: 153672) $46.80

Hydraulic Seal Kit - Tilt Lift Clam Cylinder - For Case Construction and industrial models 350, 450, 455, 455C, 580, 580B, 580C, 680, 680E, 680G, 680H, 780B, 850, 855E, Replaces Case OEM number G105546, Rod: 2", Bore: 3-1/2", (Item #: 152915) $30.80

Miscellaneous

No
Picture
Angle Cylinder Bushing - For Case Construction and industrial models 850, 850B, 850C, 850D, 850E, Replaces Case OEM number D34340, Inside Diameter: 44.68 mm, Outside Diameter: 53.98 mm, Width: 25.4 mm, (Item #: 187601) $33.30

Bushing - Case, D32919 - For Case Construction and industrial models W14, 300, 310, 350, 450, 455, 480, 480C, 480D, 480E, 480F, 550, 850, 855E (Blade / Bucket), Replaces Case OEM number D32919, (Item #: 152196) $18.30

Stabilizer Anchor Bushing - For Case Construction and industrial models 26, 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 550, 580C, 580D, 580M, 580 Super M, 584, 585, 650H, 650K, 750K, 850, Replaces Case OEM number D43940, (Item #: 152176) $4.10

Oil System

Oil Filter - This Oil Filter measures: Inside Diameter 1 5/16 inches (33.3mm), Outside Diameter 3 3/4 inches (95.3mm), Length 2 7/8 inches (73.0mm). It is used on Case / David Brown models: 1200, 1210, 1212, 1410, 1412, 770, 780, 850, 880, 885, 890, 900, 950, 990, 995, 996. Replaces OEM K902321, 902125, 902321, 920522, K2107, K902125. Replaces Baldwin P190, Fleetgaurd LF4001, Wix 119P, Perkins 2654094, 26540018 (Item #: 126011, Ref: K902125) $13.40

Steering

Final Drive Pinion - For Case Construction and industrial models 450, 450B, 455, 475, 850, Replaces Case OEM number A50143, Teeth: 13, Splines: 24, Length: 8-1/8", (Item #: 126899) $287.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

Decal - Case Eagle Decal, 2 inch. (Item #: 100513, Ref: R5170) $2.70

Decal - Case Eagle Decal, 1-1/4 inch printed on vinyl. (Item #: 183056, Ref: R5235) $2.60

Decal - Case Eagle Decal, 4 inch. (Item #: 100524, Ref: R1299) $5.30

Decal - Case Eagle Decal, 6 inch. (Item #: 100525, Ref: R1300) $7.00

Decal - Case Eagle Decal, 9 1/2 inch. (Item #: 100526, Ref: R1303) $8.80

Draft-O-Matic Decals - Draft-O-Matic Decals, Round (Set of 2) - Vinyl Cut. Decal is used in association with any other listed decal set if you have a DRAFT-O-MATIC. (Item #: 100517, Ref: R2247) $26.20

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $99.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - This thermal battery wrap is used to keep your battery warm. It is 60 Watts and measures 28 inches long. (Item #: BTW28) $22.50

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $19.20

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

No
Picture
Spark Plug - Standard tip, 14mm thread, 3/8" reach. Replaces Champion J17LM, Motorcraft A7CLM. NOTE: Verify spark plug type before ordering. (Item #: AL456) $2.40

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

$Case 850 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Case 850 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Case 850 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Case 850 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Case 850 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Case 850 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Case 850 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - Rain Caps are located in the EXHAUST category of the Accessories and Universal parts section.

NOTE

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.08

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Carburetor Elbow and Strainer - Fits some Case models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $17.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

$Case 850 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Gauges

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Eagle Hitch Leveling Knob, Rubber - For all models using Eagle Hitch. Replaces O4995AB. (Item #: 126108, Ref: A26845) $15.20

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.17

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

No
Picture
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 160 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: GG160) $9.96

Universal Pressure Gauge, Hydraulic - 100 LB Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: GG100) $9.96

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Case Yellow, Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154618, Ref: TP160GAL) $100.00

No
Picture
Paint, Case Yellow, Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154616, Ref: TP160QT) $42.80

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Desert Sand, 1 Gallon - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108139, Ref: TP130GAL) $105.00

No
Picture
Paint, Desert Sand, 1 Quart - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108138, Ref: TP130QT) $38.10

No
Picture
Paint, Desert Sand, Spray Can - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. Ensure you have correct color. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108137, Ref: TP130SP) $10.30

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Power White, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100348, Ref: TP271GAL) $61.00

No
Picture
Paint, Power White, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100347, Ref: TP271QT) $24.00

No
Picture
Paint, Power White, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100346, Ref: TP271SP) $9.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $173.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: A22279, A30834, A42242, G45307, K964615, O10582AB, K902187, K960750 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $76.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.01

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $63.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube, not for radial tires. (Item #: 183819, Ref: WHS064) $82.00