FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Case 500 Tractor Parts

[Categories] [All Case Models] [Print]

Brakes

Brake Actuating Spring - Used with disc brakes. For tractor models 1030, D, DC, DO, DV, LA, 500, 700, 730, 800, 830, 900, 930, 940, 770. Replaces A30897, A41816. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105. (Item #: 113798, Ref: A155624) $1.70

Brake Band LInings with Rivets - For Case Construction and industrial models 310 (s/n 3008188-ealier), 310C (s/n 3008188-3010989), 310D (s/n 3012301-3014509), 310F (3019001-3023000), 310G (s/n 3032301-later), 320 (s/n 3000001-3008132), 350, 350B, 420B (s/n 3012301-3014316), 420C (3012301-later), 420C (s/n 3012301-later), 500, 520, Replaces Case OEM number R29906, D23566, Linings and rivets for 1 brake band, (Item #: 140513) $170.00

No
Picture
Brake Spring - Band Return, Set of 4 - For Case Construction and industrial models W5A, 430CK, 480B, 480C, 480CK, 480D, 480LL, 500, 530CK, 580, 580B, 580C, 580D, 580SD, 584C, 584D, 585C, 585D, 586C, 586D, Replaces Case OEM number A157705, G48507, (Item #: 171579) $19.00

Disc Brake Boot - For tractor models 1030, (LA from serial number 5418607and up), (D, DC, DE, DH, DI, DL, DO, DS, DV, S, SC, SE, SI, SO from serial number 5600001 and up), 400, 401, 410B, 411, 500, 600, 700, 800, 900, 930, 940, 970, (730 from serial number 8253501 and up), 770, (830 up to serial number 8253500), (870 up to serial number 8675001), 1070, (1175 from serial number 8715247 and up). Replaces O8762AB. (Item #: 115717, Ref: A27465) $11.10

Clutch

Clutch Disc - 12 inch - 4 Pad - This is a 4 pad, 12 inch Transmission Clutch Disc. It has a 1.75 inch, 16 spline hub. Replaces A34277 (Item #: 165360, Ref: 1997842C1) $132.00

Clutch Disc, Remanufactured - For Case tractor models 500, 600, 900, Clutch Size: 12-1/2", Clutch Hub: 1-11/16", Clutch Spline: 16, Clutch Center: Solid, Clutch Type: 6 Pads, (Item #: 206643) $129.01

Clutch Disc, Remanufactured, 4386AA - For Case tractor models 500, 600, 900, Replaces Case OEM number 4386AA, A28620, Clutch Size: 12", Clutch Hub: 1-11/16", Clutch Spline: 16, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206642) $123.00

Clutch Release Bearing - This Release Bearing measures: inside diameter 2.250 inch outside diameter 3.803 inch width .8085 inch. Replaces 48974D, 649106R91, N1171, A7538, 10A21384GV, 120795R91, 48974DGV, 618237R91, A2526-31, A7538GV, TPAT17464GV, TP-AT17464GV, 104810A, 72160065, AT17464. (Item #: 100013, Ref: 10A21384) $30.60

Pressure Plate Assembly - This Pressure Plate Assembly is 12 inches, 3 lever, open center, (with a 1.406 inch flywheel step). It replaces A33109-R, A59589-R, A59589-RN, A357299, 357299R95 (Item #: 165361, Ref: A59589) $320.00

Decals and Emblems

Case 500 Decal Set, Tripl Range, Vinyl - For Case tractor model 500, Case 500 Tripl-Range, For Mylar use Item #: 183115, (Item #: 100389) $70.00

Case Decal, Eagle, Vinyl, 4" - For Case tractor models C, D, L, R, S, V, 200, 200B, 300, 350, 400, 430, 500, 530, 600, 630, 700, 730, 770, 800, 870, 900, 930, 970, 1030, 1070, 1175, 1200, 1210, 1270, 1370, 1390, 1490, 1570, 1690, Compatible with Case Construction and industrial models 310, 320, 420, 450, 680CK, Compatible with David Brown tractor models 880, Case Eagle decal, 4" dia., Vinyl decal, (Item #: 100514) $7.00

Case Decal, Eagle, Vinyl, 6" - For Case tractor models C, D, L, R, S, V, 200, 200B, 300, 350, 400, 430, 500, 530, 600, 630, 700, 730, 770, 800, 870, 900, 930, 970, 1030, 1070, 1175, 1200, 1210, 1270, 1370, 1390, 1490, 1570, 1690, Compatible with Case Construction and industrial models 310, 320, 420, 450, 680CK, Compatible with David Brown tractor models 880, Case Eagle decal, 6" dia., Vinyl decal, (Item #: 100515) $10.50

$Case 500 Case Decal, Eagle, Vinyl, 9-1\2 inch$
Case Decal, Eagle, Vinyl, 9-1/2" - For Case tractor models C, D, L, R, S, V, 200, 200B, 300, 350, 400, 430, 500, 530, 600, 630, 700, 730, 770, 800, 870, 900, 930, 970, 1030, 1070, 1175, 1200, 1210, 1270, 1370, 1390, 1490, 1570, 1690, Compatible with Case Construction and industrial models 310, 320, 420, 450, 680CK, Compatible with David Brown tractor models 880, Case Eagle decal, 9 1/2" dia., Vinyl decal, (Item #: 100516) $20.90

No
Picture
Decal Set - For 500 Diesel (Yellow). Complete Decal Set. Vinyl. (Item #: 100384, Ref: R1889) $115.00

Decal Set - For 500 Tripl-Range. Complete Decal Set. (Item #: 183115, Ref: R1893) $42.30

Serial Number Tag - For Case tractor models D, L, S, V, 500, Blank with 2 rivets, 1-7/16" X 3-3/16", Customer must stamp their own number, Anodized Aluminum, (Item #: 150740) $33.70

Drive Train

Belt Pulley Brake Lining - For Case tractor models D, DC, DC-3, DC-4, DCS, DH, DI, DO, LA, 500, 900, 920, 930 (Western with hand clutch), Replaces Case OEM number 1342343C1, A21104, 151-178, 2561, O6153AB, With 4 Rivits, 2-7/8" Long, 1-7/16" Wide, .No refunds if cracked or broken from trying to install, (Item #: 151011) $22.20

Manual Shuttle Synchronizer Ring - This Manual Shuttle Synchronizer Ring is used 300, 320, 400, 430, 500, 530, 600, 630, 470, 570, 480, 480CK, 480B, 580, 580CK, 580B. Replaces 71840R1, G46077 (Item #: 179344, Ref: G46077) $32.60

Electrical System

Distributor Cap, Autolite or Prestolite - This cap fits Autolite or Prestolite distributors ONLY, with 3-3/8 inch outside diameter, clip held cap. IAD-4010-A, IAD-4010-C, IAD-4020A, IAD-4020B, IAD-4023, IAD-4028-A, IAD-4043, IAD-6001-1B, IAD-6003-1A, IAD-6003-1B, IAD-6003-2A, IAD-6003-2F, IAD-6003-2J, IAD-6003-2K, IAD-6004-1C, IAD-6004-1D, IAD-6004-1E, IAD-6004-2D, IAD-6004-2E, IAD-6004-2G, IAD-6004-2H, IAD-6010-1. Note, it does not fit IGZ or IGW distributors. Replaces 1500831M91 or 15008310M91 or Replaces: IG1324, A8368, A8638, IG1324D, IG1324H, IG1324J, IG1324H, IG1324J, MX0510, 1500290M91, 1500831M91, IG-1324AD, IG1324AD, IG1324C (Item #: 105575, Ref: R2009) $17.50

Distributor Rotor Button - This Rotor Fits AUTOLITE distributors with 3-3/8 inch outside diameter, clip held cap, including distributors: IAD-4010-A, IAD-4010-C, IAD-4020A, IAD-4020B, IAD-4023, IAD-4028-A, IAD-4043, IAD-6001-1B, IAD-6003-1A, IAD-6003-1B, IAD-6003-2A, IAD-6003-2F, IAD-6003-2J, IAD-6003-2K, IAD-6004-1C, IAD-6004-1D, IAD-6004-1E, IAD-6004-2D, IAD-6004-2E, IAD-6004-2G, IAD-6004-2H, IAD-6010-1. Note, it does not fit IGZ or IGW distributors. Replaces IG-1657R, IGS-1016B, A20416, A8369, IG1657R, T-7691, T7691, TGO-7746, TGO7746, 1500293M1, 1500293M91, 21A321, AV101088. (Item #: 112188, Ref: IG1657R) $7.00

Electronic Ignition Conversion Kit, 12V Negative Ground - 12 Volt NEGATIVE Ground. (Also available in 12 Volt POSITIVE, 6 Volt NEGATIVE and 6 Volt POSITIVE - CALL). For the following models using Autolite IAD-6003, IAD6003-2F and IAD6004 distributors. (VERIFY your distributor for match): VA, VAC, VAE, VAI, VAO, VAS, 150, 200, 200B, 210, 210B, 211B, 300, 302, 310, 320, 350B, 351, 400, 400B, 430, 440, 441, 450, 500, 530, 540, 540C, 541, 541C, 580CK, 600B, 640, 640C, 641, 641C, 650, 655, 675, 1150, 1155, 1255. Electronic Ignition Conversion Kit, replaces points and condenser with an electronic module. Use with 12 volt negative ground system. MUST ALSO REPLACE CAP (part number AL165) and ROTOR (part number AL150) both available from an auto parts store. (Item #: 105088, Ref: 1541) $130.00

Ignition Kit, Autolite Distributors - Kit contains Points, condenser, Rotor. Used with Autolite distributors ONLY, with 3-3/8 inch outside diameter, clip held cap. IAD-4010-A, IAD-4010-C, IAD-4020A, IAD-4020B, IAD-4023, IAD-4028-A, IAD-4043, IAD-6001-1B, IAD-6003-1A, IAD-6003-1B, IAD-6003-2A, IAD-6003-2F, IAD-6003-2J, IAD-6003-2K, IAD-6004-1C, IAD-6004-1D, IAD-6004-1E, IAD-6004-2D, IAD-6004-2E, IAD-6004-2G, IAD-6004-2H, IAD-6010-1. Note, it does not fit IGZ or IGW distributors. Replaces OEM #s: 1500293M1, 1508770M91, 1508810M91. (Item #: 105290, Ref: S.42933) $18.00

Ignition Kit, Delco Clip-Held Cap Distributor - Ignition kit For DELCO distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. For: 200B, 210, 211, 211B, 300, 310, 300B, 320, 350, 351, 400, 400B, 420, 430, 440, 441, 450, 500, 500B, 580CK, 600, 600B, 640, 640C, 641, 641C, D, DC, DC3, DC4, DO, S, SC, SI, SO, 200, 200B, 210B, 211B. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583. (Item #: 103151, Ref: ATK1DCR) $10.30

No
Picture
Starter - 3 Bolt mounting, 12 Volt Starter with 9 Tooth Starter Drive, clockwise rotation. REMANUFACTURED - add $75.00 refundable core charge. For 1150, 1155, 1255, 159, 188, 310G, 400, 430, 430CK, 435, 440, 441, 450, 470, 480, 480CK, 500, 530, 530CK, 535, 535LCK, 540, 541, 570, 580, 580CK, 640, 641, W5. REPLACES MDU7102. (Item #: 203163, Ref: TS-5007) $440.00

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a Universal part. Applications include ether switch, horn button, cold start, starter switch and manifold heater switch. Replaces: 09995AB, 86900358, A30858. (Item #: 121141, Ref: R7994) $13.40

Engine Bearings

Bearing - For Case Construction and industrial models 300, 310 (s/n 3008188-early), 310C (s/n 3008188-3010989), 320 (s/n 300001-3008132), 400, 420 (s/n 3008188-3012300), 500, Replaces Case OEM number 02135, (Item #: 156437) $125.00

Main Bearings - .030" Oversize - Set - For Case tractor models 500, 600, 900, 920, 930, 940, 970, 1030, 1070, 1090, 1170, 1175, 1200, 1270, 2090, 2094, 2290, 2294, Compatible with Case Construction and industrial models W8, W8B, W8C, W8E, W9, W9B, W9C, W9E, W10, W10B, W10C, W10E, W12, W18, W18B, W20, W20B, W20C, W24B, W24C, 880C, 1150, 1150B, 1150C, 1150D, 1155D, Replaces Case OEM number A43162, A43167, .030" Oversize, Sold in complete set (does not include thrust washers), For Standard main bearing use Item #: 106134, (Item #: 106135) $166.00

No
Picture
Main Bearing Set, .010 - For tractor models 310, 450, 450B, 480, 480B, 580, 580C, 580CK, 580D, 350, 500 all with D207 diesel engine. And these Models: LCK430, LCK530, 310B, 420, 425, 420, 440, 480CKB, 480CKC, 480D, 480LL, 500LK, 530C, 580B, 580C, 580CK, 580CKB, 680CK, 311B, 320B, 330, 430, 431, 441, 470, 480, 530, 531, 540, 540C with 188 CID diesel engine. (Item #: 106093, Ref: MB364-10) $93.00

No
Picture
Main Bearing Set, .020 - For tractor models 310, 450, 450B, 480, 480B, 580, 580C, 580CK, 580D, 350, 500 all with D207 diesel engine. And these Models: LCK430, LCK530, 310B, 420, 425, 420, 440, 480CKB, 480CKC, 480D, 480LL, 500LK, 530C, 580B, 580C, 580CK, 580CKB, 680CK, 311B, 320B, 330, 430, 431, 441, 470, 480, 530, 531, 540, 540C with 188 CID diesel engine. (Item #: MBK364-20) $98.74

No
Picture
Rod Bearing, .010 - Single rod bearing. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580C, 580CK, 580D all with D207 diesel engine. (Item #: 158557, Ref: A50977) $7.30

No
Picture
Rod Bearing, .020 - Single rod bearing. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580C, 580CK, 580D all with D207 diesel engine. (Item #: 160278, Ref: A50978) $11.00

No
Picture
Rod Bearing, .030 - Single rod bearing. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580C, 580CK, 580D all with D207 diesel engine. (Item #: 158559, Ref: A50979) $7.30

No
Picture
Rod Bearing, Std - Single rod bearing. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580C, 580CK, 580D all with D207 diesel engine. (Item #: 158555, Ref: A50975) $14.40

Engine Gaskets

Front Crankshaft Seal - This front crankshaft oil seal has a 2.625 inch Inside Diameter, a 3.628 inch Outside Diameter and is .433 inch wide. Replaces: A157044, A23433, A24715, A27838, A40349, A57342, A62049, O3866AB, O8583AB, O9708AB, T34263 (Item #: 106145, Ref: A57342) $9.60

Head Gasket - This Gasket Set is used on the following; Case 600 Tractor with 377 engine, Case 900 Tractor Thru serial number 8108407 with 4.873 inch Liner Flange OD with 377 engine, Case 900 Tractor serial number 8107438-8108407 with 4.997 inch Liner Flange OD with 377 engine, Case 900 Tractor After # 8108407 with 377 engine, Case 800 Combine with 719BF Engine with 251 engine, Case 400 Non-Super Tractor with 251 engine, Case 420 Wheel Tractor with 251 engine, Case 425 Wheel Tractor with 251 engine, Case 800 Combine with 251 engine, Case 700 Tractor with 251 engine, Case W9 Wheel Loader Thru serial number 8150185 with 251 engine. Replaces A9235, A24462 (Item #: 172958, Ref: A9235) $130.91

No
Picture
Pan Gasket - For Case tractor models 350, 500, Compatible with Case Construction and industrial models 310, 450, 450B, 480, 480B, 580, 580C, 580CK, 580D, Replaces Case OEM number A43064, For oil pan with ears, (Item #: 176225) $29.40

Upper Gasket Set - For 207 Diesel engine in Models: 310, 310B, 320B, 330, 350, 420, 425, 430, 431, 441, 450, 450B, 470, 480, 480B, 480CKB, 480CKC, 480D, 480LL, 500, 500LK, 530, 530C, 531, 540C, 541, 541C, 570, 580, 580B, 580CK, 580CKB, 580D, 584, 600, 630, 640, 680CK, LCK430, LCK530, 540, 440, 610, 540. Upper Gasket Set includes Head Gasket. (Item #: 106108, Ref: A41425) $96.57

Valve Cover Gasket - This Valve Cover Gasket is used on 188 or 207 cubic inch diesel engines. Replaces A43030, G46866 (Item #: 158281, Ref: A43030) $16.00

Engine Rebuild Kits

Basic Engine Kit, G207D Diesel, Early - For DIESEL early SN# (up to 2869290) G207D engines. Piston replaces early 2.25 inch combustion bowl with 2.50 combustion bowl. Kit includes: Sleeves, pistons with rings, pins and retainers, complete gasket set, front and rear main seals. Fits tractors: 350, 480, 480B, 580C, 580CK, 580D, 584. Fits crawlers: 310, 350, 450, 450B, 500, 580. Fits forklifts: 584, 584C, 585. Fits Uniloaders 1740, 1845, 1855. Fits wheel loader: W11 (Item #: 130565, Ref: BEKC207DE) $741.00

Basic Engine Kit, G207D Diesel, Late - For DIESEL late SN# (2869291 and up)G207D engines. Piston has 2 1/2" combustion bowl. Kit includes: Sleeves, pistons with rings, pins and retainers, head gasket set, front and rear main seals. Order bearings seperately if needed. Fits tractors: 350, 480, 480B, 580C, 580CK, 580D, 584. Fits crawlers: 310, 350, 450, 450B, 500, 580. Fits forklifts: 584, 584C, 585. Fits Uniloaders 1740, 1845, 1855. Fits wheel loader: W11 (Item #: 130565, Ref: BEKC207DL) $741.00

Engine Overhaul Kits - Engine serial number MUST be given to determine proper Liner Kit ** Comes with Piston Liner Kit, Pistons, Piston rings, main bearings (please specify STD, .010, .020, .030), Conn rod bearings (STD, .010, .020, .030), cam bushing set, front and rear crank seals and complete gasket set. For tractor models 310, 350, 450, 450B, 480, 480B, 500, 580, 580C, 580CK, 580D with D207 CID 4 cyl engine ** Engine serial number MUST be given to determine proper Liner Kit ** (Item #: OK105) $1271.21

Engine Parts

No
Picture
Bare Block, Remanufactured, G2000 - For Case tractor models 500, 600, Replaces Case Casting number G2000, Casting number (s): G2000, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 204916) $930.01

No
Picture
Crankshaft, Remanufactured, 09700AB - For Case tractor model 500 (diesel), Replaces Casting number 09700AB, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200119) $660.01

No
Picture
Cylinder Head, Remanufactured, A6320 - For Case tractor models 400, 410B, 500, 600, 900 (Diesel), Replaces Case Casting number A6320, Replaces Casting number A6320A, 6320A, Engine 251, 267, 377, 4 or 6 Cylinders, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats and tested for cracks, (Item #: 200068) $810.01

No
Picture
Cylinder Head, Remanufactured, G1148 - For Case tractor models 350, 500, 611B, Compatible with Case Construction and industrial models W5, Replaces Case Casting number G1148, G2001, G2099, Not a welded head, Engine 148, 4 Cylinders, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200067) $605.01

No
Picture
Cylinder Head, Used - For Case tractor models 350, 500, Replaces Casting number G1148, G2001, G2099, Engine(s): 148, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200067, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400067) $222.01

No
Picture
Final Drive Shaft - For Case Construction and industrial models 300, 310, 320, 350, 400, 420, 420B, 500, Replaces Case OEM number 11832, (Item #: 111790) $184.00

Piston Pin Bushing - For Case tractor models 400, 420, 500, 600, 700, 730, 740, 770, 800, 830, 840, 870, 900, 920, 930, Compatible with Case Combine (s) 800, 1010, 1060, Compatible with Case Construction and industrial models W7, W7E, W8B, W8C, W8E, W9, W9A, W9B, W9C, W9E, W10, W10B, W10C, W10E, 680CK, Compatible with Case Engine (s) D267, D401, G251, G284, G301, G377, Replaces Case OEM number A27846, 1.358" pin, (Item #: 108142) $47.30

Spring - Inlet and Exhaust Valve - For Case tractor models 400 (Series, Diesel, s/n 8106131-later, 1/55-12/57), 500 (Series, Diesel, 1/53-12/56), 600 (Series, 1/57-12/57), 700 (1/58-12/59), 800 (1/58-12/59), 900 (1/57-12/59), Replaces Case OEM number A7358, A21692, (Item #: 166796) $16.20

Steering Clutch Disc - For Case Construction and industrial model 500, Replaces Case IH OEM number 635384R2, I.D: 5-11/16", O.D: 9-13/16", 9 External Ears, Steel, (Item #: 160130) $27.05

Valve Guide - For Case tractor models 400 (Super), 500, 600, 730, 830, 840, 900, 920, 930, 940, 1030, 1200, Compatible with Case Combine (s) 800, 1010, 1060, Compatible with Case Construction and industrial models W7, W8B, W8C, W9, W9A, W9B, W9C, W10, W10B, W10C, W12, 420, 425, 680B, 680CK, 750, 850, 1150, Replaces Case OEM number 6321A, Replaces OEM number A21671, A26294, VG829, Intake, (Item #: 128709) $9.40

Engine Rings

No
Picture
Piston Ring Set - Standard - 6 Cylinder Set - For Case tractor models 500, 600, 900, 920, 930, 970, Compatible with Case Construction and industrial models W8B, W8C, W8E, W9B, W9C, W9E, W10B, W10C, W10E, Compatible with Case Engine (s) D377, G377, Replaces Case OEM number A46308, Bore: 4.000", Ring Size: Standard, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold as complete 6 cylinder set, For Single Cylinder Piston Ring Set use Item #: 120737, (Item #: 174201) $150.00

Piston Ring Set - Standard - Single Cylinder - For Case tractor models 400, 500, 600, 700, 730, 740, 770, 800, 900, 920, 930, 970, Compatible with Case Combine (s) 800, Compatible with Case Construction and industrial models W8B, W8C, W8E, W9, W9B, W9C, W9E, W10B, W10C, W10E, 420, 425, 680CK, Compatible with Case Engine (s) D251, D377, G251, G260, G377, Replaces Case OEM number A46308, Bore: 4.000", Ring Size: Standard, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For 6 Cylinder Piston Ring Set use Item #: 174201, (Item #: 120737) $28.30

Exhaust System

Exhaust Manifold Gasket - This Exhaust Manifold Gasket measures 2.506 inches outside diameter, 1.786 inches inside diameter and is 0.085 inches thick. It fits: (L, LA, LAH, LAI, LAIH, LAIM, LI all gas, distillate, 2 used for INTAKE only), (Super 400, 400, 401, 402, 403, 405, 410, 411, 412, 413, 414, 415, 425 all gas, LP, diesel, 4 used), (500, 520 both diesel, 6 used), (610, 620 both LP, diesel; 6 used), (700, 710, 710B, 711, 712, 712B, 713, 713B, 715, 715B, 725B, 730, 740, 741, 742, 743, 744, 810, 810B, 811, 811B, 812, 812B, 813, 813B, 815 gas, 4 used), (900, 900B, 910, 910B, 920B gas, LP, diesel; 6 used), (930 Early 1960 - 64, gas with center exhaust, 6 used), (940, 941 1960 - 64, gas with center exhaust, 6 used)], (711B gas, 4 used), (420 gas, LP, diesel. 4 used), (600 LP, diesel; 6 used), (800 gas, 4 used), 680CK, (W9 gas, 4 used). Replaces: 1349071C1, A27909, O1437AB, O9815AB (Item #: 180167, Ref: A27909) $6.70

Exhaust Manifold, Triple Outlet - Exhaust Triple Outlet Manifold for 188 and 207 Diesel engines. Fits 430, 500, 530, 630, 470, 570, 480, 480B, 580B, 480C, 580C, 480D, 580D, 480LL, Ind. backhoes; 310E, 310F, 310G, 420C, 350, 350B, 450, 450B, Crawlers; 580, 584, 584C, 585C, 584D, 585D, 586D, Forklifts; 1700, 1835, 1845, 1845S. Also replaces A182084 and A39233. Exhaust Adapter available as Part # R0878A. Manifold Gaskets as Part #R0878G. (Item #: 101502, Ref: G2113) $185.00

Manifold Gasket Set - For use with G2113 Exhaust Triple Outlet Manifold (0878R) used on the 188 and 207 Diesel engines. Fits 430, 500, 530, 630, 470, 570, 480, 480B, 580B, 480C, 580C, 480D, 580D, 480LL, Ind. backhoes; 310E, 310F, 310G, 420C, 350, 350B, 450, 450B, Crawlers; 580, 584, 584C, 585C, 584D, 585D, 586D, Forklifts; 1700, 1835, 1845, 1845S. Replaces: G2113, A39233, A182084 (Item #: 101503, Ref: R0878G) $25.40

Muffler, Horizontal - Round body 4-1/4" shell diameter, A= 2-3/4" inlet length, B= 1-7/8" inlet I.D., C= 13-1/2" shell length, D= 2-3/4" outlet length, E= 2" outlet O.D., F= 19" overall length. For tractor models (500 1955 to 1957 with gas engine), (530 SN# up to 81911470 with gas engine). (Item #: 100268, Ref: G45703) $28.50

Muffler, Vertical - Inlet I.D. 1-15/16 inch (C) Outlet O.D. 2 inch (B) Overall length 29 inch Shell O.D. 3.25 inch. For (GAS): VA, VAC, VC, 200B, 300, 300B, 310 (utility), 350, 400, 500, 600. YTO-M81C. (Item #: 100262, Ref: M81C) $42.00

Muffler, Vertical - Vertical Exhaust (A)inlet inside diameter 2 3/4 inch, (C)outlet outside diameter 2 3/4 inch, (B)overall length 26 inch. For: L, LA, LA1, LAE, LAD, LA1H Gas and Diesel; 500 and 900 Diesel. OEM number use R1755 clamp, use R1804 rain cap. (Item #: 100273, Ref: R1577) $60.05

Fuel System / Air Intake

Carburetor - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: S, VA series (1942-56 that use TSX597 or TSX663 only), 200, 300, 300B, 310, 320 Crawler, 440, 480, 500, 600 Crawler, Replaces Marvel Schebler # TSX60, TSX85, TSX112, TSX90, TSX237, TSX338, TSX597, TSX603, TSX635, TSX663, TSX680, TSX694, TSX710, TSX804, TSX936, TSX936SL, TSX937, TSX937SL, TSX957SL Replaces Zenith #9667, 10432, 11080, 11535, 11544, 11580, 12544. Center to center on the 2 mounting bolts is 2 5/16 inches. Made in USA, 1 year warranty. (Item #: 100751, Ref: 14544) $519.00

Carburetor Float - Zenith Carburetor Float Use w/ Zenith Carburetors: 11535, 11537, 11580, 11588, 11705, 11973, 12032, 12066, 12217, 12232, 12590, 12293, 12427, 12471, 12509, 12534, 12548, 12685, 12758, 12902, 12913, 12994, 13048, 13106, 13107, 13108, 13109, 13151, 13153, 13154, 13161, 13294, 13304, 13316, 13318, 13328, 13338, 13337, 13338, 13372, 13374, 13378, 13384, 13390, 13406, 13416, 13465, 13546, 13578, 13588, 13596, 13608, 13612, 13628, 13716, 13758, 13783, 13795, 13808, 13875, 13881, 13912, 13913, 13914, 13915, 13916, 13917, 13920, 13956, 14991, 14992, 14995, 14996, 14997, 14999. Replaces E1NN9550AA, 1508089M91, B51359, 70227103, 381027R1, 1K7630. (Item #: 108448, Ref: R4531) $24.40

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX749. For the following tractor models: 500, 510B, 511B. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203245, Ref: 1220-CARB) $375.01

No
Picture
Check Valve - For Case Construction and industrial model 500 Replaces Case OEM number 3047506R1, , Compatible with International tractor model B354, B414, B434, 276, 354, 434, 444, 2300, 2350, Compatible with International Construction and industrial model 2300A, 3444, Replaces International OEM number 3047506R1, For British Zenith Carburetor number VN, VNN, (Item #: 128483) $66.00

Throttle Spindle - For Case Construction and industrial model 500 Replaces Case OEM number 3047470R1, , Compatible with International tractor model B354, B414, B434, 276, 354, 434, 444, 2300, 2350, Compatible with International Construction and industrial model 2300A, 3444, Replaces International OEM number 3047470R1, For British Zenith Carburetor number VN, VNN, (Item #: 128482) $54.00

Gauges

Ammeter - This Ammeter with a Case logo has a 2 inch diameter and fits C, CC, CC-3, CC-4, CCS, CH, CI, CO, D, DC, DC-3, DC-4, DCS, DEX, DH, DI, DO, DV, L, LA, LAI, LAIH, LAIM, R, RC, S, SC, SC-3, SC-4, SI, SO, Super 400, V, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAE, VAH, VAI, VAIW, VAIW-3, VAO, VAO-15, VC, VI, VO, 400, 401, 402, 403, 405, 410, 411, 412, 413, 414, 415, 420, 420C (Crawler), 425, 500, 520, 600, 610, 620. Replaces: O3601AB. (Item #: 121648, Ref: O3601AB) $27.40

Oil Pressure Gauge - For Case tractor models C, CC, D, DC, DC-3, DC-4, DCS, DH, DI, DO, DV, L, LA, LI, R, S, SC, SC-3, SC-4, SI, SO, VA, VAC, VAH, VAI, VAO, VC, VI, VO, 400, 410, 411, 412, 500, Compatible with Case Construction and industrial models W9, 420 (Loader/Backhoe), 600 (Skidder), Replaces Case OEM number 04370AB, A31169, VT2249, A14245H, Chrome Bezel, Case Logo on Face, Dash Mounted, For 2" Diameter Hole, 1/8" male pipe threads, 0-60 PSI, (Item #: 121647) $24.20

Tachometer Cable - Metal - For Case tractor models 200B, 300, 350, 400, 500, 600, Compatible with Massey Ferguson tractor models TO35, 35, 40, 50, 135, 150, 165, 175, Compatible with Massey Ferguson Construction and industrial models 30, 202, 2135, 3165 Replaces Massey Ferguson OEM number 506331M91, , Compatible with Massey Harris tractor models 50, 38-7/8" Long, 5/8 - 18 x 7/8 - 18 Threads, (Item #: 162003) $20.70

Water Temperature Gauge - This temperature gauge comes with a 84 inch long lead, metal base, glass lens and chrome bezel. The Fitting is 5/8-18 UF end with 1/2 NPT pipe bushing. Fits in a 2 inch diameter hole. For tractor models 400, 430, 440, 450, 470, 480, LA, 500, 600. Water Temp Gauge with Case logo. (Item #: 100296, Ref: 06161AB) $28.40

Lights

Headlight - Zinc plated. For D, DS, S, SC, LA, 400, 401, 402, 403, 405, 410, 411, 412, 413, 414, 415, 420, 425, 500, 520, 600. Headlight. 12 volt. 5 3/4 inch diameter. Replaces: Serviceable : O9668AB, O6330AB. (Item #: 105352, Ref: 06330AB-12V) $82.00

Headlight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: DC, SC, VAC, DV, VAI, DI, DO, LA, S, SI, SO, VA, VAH with serial number up to 5400000, VAO, 400, 500, 700, 900. Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.10

Miscellaneous

Lever - For Case tractor models 200B, 210B, 211B, 300, 311, 312, 350, 400, 410, 410B, 411, 420, 430 (gas / diesel), 440 (gas / diesel), 441 (gas / diesel), 470 (gas / diesel s/n 8262801-later), 500, 510B, 511B, 600, 610B, 611B, Compatible with Case Construction and industrial models 210B, 300, 310, 320, 350, 400, 420, 420B, 430 (gas / diesel), 500, 600, Replaces Case OEM number B318-82, G1085, Lever includes roll pin., (Item #: 127410) $53.58

Oil System

Oil Filter - For tractor models VA, VAC, VAI, VAO, VAS, 200, 300, 301, 310, 311, 350D, 400, 500, 600 series with case engine, and other models, verify OEM Part Number. Replaces VT3589, and A36136. (Item #: 110866, Ref: 70240912) $22.10

PTO / Driveline

PTO Shield - For tractor models D, DC, DH, DI, DO, DV, L (SN: 4200000 and up), LA, RC, S, SC, SI, SO, VA, VAC, VAH, VAIW, VAO, VAS, 200B, 210B, 211B, 300, 300B, 311, 312, 320, 350, 400B, 410B, 411B, 430, 351, 431, 441, 470, 480, 500, 500B, 530, 530CK, 531, 540, 541, 570, 580CK, 600B, 630, 631, 632, 640, 641, 900. Replaces O8303AB, B555AA, A27335, 2172AA. (Item #: 127027, Ref: A27335) $67.00

PTO Shield Mounting Plate - This plate is required for mounting a PTO shield on the following Case Tractors: D, DC, DC-3, DC-4, DH, DI, DO, DV, L (serial number 4200000 and up), LA, R, RC, S, SC, SI, SO, 200B, 210B, 211B, 300, 300B, 301, 302, 310, 311, 312, 320, 350, 351, 400B, 410B, 411B, 430, 431, 440, 441, 470, 480B, 500, 500B, 510, 511, 530, 530CK, 531, 540, 541, 570, 580B, 600, 600B, 610, 611, 614, 630, 631, 632, 640, 641, 642, 900. Replaces original part numbers: G16775, O5386AB and VT2297. (Item #: 127028, Ref: G16775) $38.10

Sheet Metal / Body Parts

$Case 500 Cage Nut - 1\4 inch - 20 NC$
Cage Nut - 1/4" - 20 NC - For Case tractor models 200B, 210B, 211B, 300, 311, 312, 350, 400, 410, 410B, 411, 412, 420, 430, 440, 441, 470, 500, 510B, 511B, 530, 531, 540, 541, 570, 600, 610B, 611B, 630, 640, 641, 700, 702, 800, 801B, 900, 920, 930, 940, Replaces Case OEM number 131-98, 131-102, 131-115, G48002, Zinc finish, 1/4" - 20 NC, (Item #: 150680) $2.70

Toolbox - Says "CASE". For tractor models D, DC, DO, DV, S, SC, SO, Late LA, 400, 500. (Item #: 152185, Ref: 2884AA) $47.30

Steering

Alloy Steel Ball - Chrome, 1", Grade 24 - For Case Construction and industrial models 430CK, 480B, 480C, 480CK, 480D, 480LL, 500, 530CK, 580, 580B, 580C, 580D, 580SD, 584C, 584D, 584E, 585C, 585D, 585E, 586C, 586D, 586E, Replaces Case OEM number 211-21, (Item #: 168884) $6.20

Steering Clutch Disc - For Case Construction and industrial model 500, Replaces Case IH OEM number 675848R2, 8.95" O.D., 5" I.D., 26 Teeth, (Item #: 151819) $58.00

Steering Pin - For Case tractor models 200B, 300, 300B, 311, 311B, 312, 312B, 350, 351, 400, 400B, 411, 411B, 420, 430, 500, 500B, 510B, 511B, 530, 600, 600B, 610B, 611B, 614B, 630, 640, 641, Replaces Case OEM number A40907, Length 1.437", Diameter Taper 0.375"-0.550", Diameter where presses into sector 0.499", Flanged base diameter 0.721", (Item #: 126709) $39.60

Steering Wheel - This Steering wheel is 19 3/4 inches diameter, 4 spoke and has a 7/7 inch hub. For tractor models LA, 500, 600. (Item #: 126717, Ref: O7778AB) $63.00

Steering Wheel Nut - This steering wheel nut fits the following tractor models: D, DC, DC3, DC4, DCS, DEX, DH, DI, DO, DV, L, LA, S, SC, SI, SO, V, VA, VAC, VAE, VAH, VAI, VAO, VAS, VC, VI, VO, 1030, 1030CK, 930, 1031, 1032, 200, 200B, 210, 210B, 211B, 300, 300B, 310, 310B, 320, 320B, 400B, 410B, 420B, 430, 430CK, 440, 470, 530, 530CK, 540, 570, 500, 520, 600, 610, 620, 630, 640, 730, 830, 730CK, 740, 830CK, 840, 900, 930CK, 931, and 932. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 4291112, 352536R1, 25-1512 and 251512. (Item #: 157780, Ref: 353435X1) $1.00

Tie Rod End - Measures 3.500 inches from the center of the ball joint to the end of the threaded rod. It is 0.812 inches - 18 right hand thread. Replaces A28419 (Item #: 104456, Ref: A28419) $31.70

Tie Rod End - Left Hand - For Case tractor models 500, 730, 830, 930, Replaces Case OEM number A28704, Fits Left Hand Side, Dimension A: 3.500", Dimension B: .812", 18 Left Hand Thread, (Item #: 104455) $32.80

Wheels

Front Wheel Hub Cap, Used - For Case tractor models D, DC, DH, DO, DV, L, LA, 300, 300B, 400, 400B, 500, 500B, 600, 600B, 630, 700, 800, 900, 920, 930, 940, Replaces Case OEM nos 4384A, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430696) $36.01

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

Decal - Case Eagle Decal, 2 inch. (Item #: 100513, Ref: R5170) $2.70

Decal - Case Eagle Decal, 1-1/4 inch printed on vinyl. (Item #: 183056, Ref: R5235) $2.60

Decal - Case Eagle Decal, 4 inch. (Item #: 100524, Ref: R1299) $5.30

Decal - Case Eagle Decal, 6 inch. (Item #: 100525, Ref: R1300) $7.00

Decal - Case Eagle Decal, 9 1/2 inch. (Item #: 100526, Ref: R1303) $8.80

Draft-O-Matic Decals - Draft-O-Matic Decals, Round (Set of 2) - Vinyl Cut. Decal is used in association with any other listed decal set if you have a DRAFT-O-MATIC. (Item #: 100517, Ref: R2247) $26.20

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - This thermal battery wrap is used to keep your battery warm. It is 60 Watts and measures 28 inches long. (Item #: BTW28) $22.50

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $19.20

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

No
Picture
Spark Plug - Standard tip, 14mm thread, 3/8" reach. Replaces Champion J17LM, Motorcraft A7CLM. NOTE: Verify spark plug type before ordering. (Item #: AL456) $2.40

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

$Case 500 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Case 500 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Case 500 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Case 500 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Case 500 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Case 500 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Case 500 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - Rain Caps are located in the EXHAUST category of the Accessories and Universal parts section.

NOTE

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.00

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Carburetor Elbow and Strainer - Fits some Case models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $17.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

$Case 500 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Gauges

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Eagle Hitch Leveling Knob, Rubber - For all models using Eagle Hitch. Replaces O4995AB. (Item #: 126108, Ref: A26845) $15.20

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

No
Picture
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 160 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: GG160) $9.96

Universal Pressure Gauge, Hydraulic - 100 LB Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: GG100) $9.96

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Case Yellow, Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154618, Ref: TP160GAL) $100.00

No
Picture
Paint, Case Yellow, Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154616, Ref: TP160QT) $42.80

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Desert Sand, 1 Gallon - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108139, Ref: TP130GAL) $105.00

No
Picture
Paint, Desert Sand, 1 Quart - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108138, Ref: TP130QT) $38.10

No
Picture
Paint, Desert Sand, Spray Can - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. Ensure you have correct color. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108137, Ref: TP130SP) $10.30

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Power White, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100348, Ref: TP271GAL) $61.00

No
Picture
Paint, Power White, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100347, Ref: TP271QT) $24.00

No
Picture
Paint, Power White, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100346, Ref: TP271SP) $9.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $173.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: A22279, A30834, A42242, G45307, K964615, O10582AB, K902187, K960750 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $78.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.00

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube, not for radial tires. (Item #: 183819, Ref: WHS064) $82.00