Welcome! Please use the navigational links to explore our website.

Company Logo
(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Allis Chalmers WC Tractor Parts

[ Show Pictures ]

[Categories]   [All Allis Chalmers Models]   [Print]  


Brakes
Lined Brake Band - This lined brake band is for models RC, WC and WF. (Part No: 70202633)
$90.11

Clutch
Clutch Disc - 10 inch diameter, 1-1/4 inch hub, 10 spline. For tractor models WC, WD, WD45, WF. (Part No: 70226764)
$96.53

Clutch Inspection Plate - Fits B, C, CA, IB, D10, D12, D17, D19, WC, WF, 160, 170, 175. (Part No: 208465)
$14.25

Pilot Bearing - Clutch pilot bearing. For tractor models RC, WC, WD, WD45. (Part No: 70205756)
$28.62

Pressure Plate - 10 inch Rockford Style. For tractor models WC, WD, WD45, WF. (Part No: 70230506)
$211.75

Cooling System
Engine Heater - For tractor models WC, WD, WD45. Not for use on Diesel Engine without By-Pass in Water Pump. Heater fits in Lower Radiator Hose. 600 Watt eases starting on cold mornings. (Part No: 5B15)
$43.88

Fan Belt - This 5/8 inch belt measures 46.875 inches in length. For W, WC, WD, WD45, WF (Part No: 70209824)
$12.86

Fan Blade - Fan Blade For WC, WD, WD45, D17, D19. Four Blade. (0566R) (Part No: 70235753)
$23.40

Fan Blade, 5 Blade - 17-1/2 inch diameter, 1-1/16 inch pilot hole, mounting holes on 1-1/4 inch centers. For tractor models (170, 175 gas), (D17, D19, WD45 gas or diesel), WC, WF. (Part No: 70240973)
$81.36

Radiator - For model WC after serial number 74330, WD, WD45. ALL GAS/LP. W226 Gas Power Unit. Radiator. Core size: 18.0 inches wide, 18.187 inches high, 3 rows of tubes, 7 fins per inch. Also replaces 70228587. Uses 70213675 temperature gauge, available separately. (Part No: 70228585)
$255.47

Radiator Cap - Original style with "WATER" imprint, non-pressurized system. For tractor models (B from serial number 61221), (C from serial number 18581), CA, RC, G, (WC, WF unstyled), WD, WD45. Replaces 70228545, 213485, 228545, 206622, 70206622 (Part No: 43983D)
$4.94

Radiator Cap, Pressurized - This 4 pound pressurized cap is for tractor models using a pressurized cap: Late B, C, CA, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 70228545, 70228722, 70228817, 70254891. (Part No: 70254891)
$5.73

Radiator Cap, With Lever - Original style. For tractor models B, C, CA, G, WC, RC, WF, WD, WD45. DOES NOT FIT our radiator 70214337. Only fits original early models with UNPRESSURIZED system radiator. Also used as a gas cap for some applications. (Part No: 70207244)
$22.20

Radiator Hose Clamp - This clamp is used as a radiator hose clamp on; (D17 All Gas Models and Diesel up to serial number 38963), WC, WD, WF, (WD45 Gas Models) Replaces: 921913, 910144. (Part No: 608287)
$3.75

Radiator Hose, Lower - 1.532 inch inside diameter. For tractor models WC, WD, WD45, WF. 70203090 (Part No: 180085M1)
$3.98

Radiator Hose, Upper - 1.5 inch inside diameter. For tractor models (D17 diesel up to serial number 38963), WC, WD, WD45, WF. 70233153 (Part No: 2N8260)
$3.83

Water Pump - Without pulley. For tractor models WC, WD, WD45, WF ALL with gas engines. replaces 70226320-R, 79016822-R, 9004298, 108317, 79009248, 226320, 250396, 70226320, 70250396. Casting# 125577, 79009248 (Part No: 79016822)
$95.15

Decals and Emblems
Decal Set - For model WC (1933-1938). Set of 10 self adhesive decals. Blue Letters, long letters A & C with border. Printed on Vinyl (Part No: ACWC)
$28.88

Decal Set - For model WC (1939-1940). Set of 10 Self-adhesive decals. Blue letters, long letters A & S without border. (Part No: ACWCL)
$28.88

Decal Set - For model WC (Black letters. 1941-1948). Set of 12 self adhesive decals. (Part No: ACWCB)
$28.88

Decal Set - This is a different version of ACWCB. Note the differences in the picture. Both versions were actual version put out by Allis Chalmers. For Model WC with Black Letters, 1941-1948. This is a Mylar set and is not available in Die Cut Vinyl. (Part No: ACWCB-1)
$35.82

Decal Set - For model WC (1939-1940). Set of 10 Self-adhesive decals. Blue letters, long letters A & S without border. Printed on Mylar. (Part No: R1279)
$18.75

Decal Set - For model WC (Black letters. 1941-1948). Set of 12 self adhesive decals. Printed on Mylar. (Part No: R1280)
$28.88

Decal Set - Vinyl - Complete for WC (1933-1938). VINYL Blue Letters WITH LONG A&S WITH BORDER Decal Set. Individual Letter / Numbers sets - Not full sheet type. (Part No: R1278V)
$111.15

Decal Set - Vinyl - Complete for WC (1939-1940). VINYL Blue Letters WITH LONG A&S WITHOUT BORDER Decal Set. Individual Letter / Numbers sets - Not full sheet type. (Part No: R1279V)
$71.08

Decal Set - Vinyl - Complete for WC (1941-1948) VINYL Black Letters Decal Set. Individual Letter / Numbers sets - Not full sheet type. (Part No: R1280V)
$68.26

Drive Train
Final Drive Pan Gasket - This Final Drive Pan Gasket Fits: D17, WC, WD, WD45; It replaces original part numbers 247874 and 70247874. (Part No: 70247874)
$13.50

Gear Shift Boot - This is an Original Style Gear Shift Boot. For Allis-Chalmers models B, C, CA, WC, WD, WD45, D10, D12, D14, and D15. (Part No: R4457)
$10.43

Gear Shift Lever Washer And Snap Ring Kit - This Gear Shift Lever Washer and Snap Ring Kit retains the gear shift lever into the housing. It measures: 0.254 inches thick, 1.368 inch outside diameter and 0.998 inch inside diameter. Fits: B, C, CA, D10, D12, D14, D15, ED40, G, WC, WD, WD45, WF. Replaces retainer: 207772, 70207772 and snap ring: 207771, 202875, 70202875. (Part No: 70202875)
$13.20

Gear, Reverse Idler - 24/20 tooth. For tractor models WC, WF, (WD, WD45 serial number up to 127007). (Part No: 70226113)
$77.00

Electrical System
Alternator Bracket Kit - This Alternator Bracket Kit fits the following gas or LP: WC, WD, WD45, WF. Use with Alternator 8NE10305SE. (Part No: ACS2352)
$57.14

Coil, Wico - This Magneto Coil is for Wico Model X series magnetos. Fits models B, C, RC, WC, WD, WF. (Part No: AR12006)
$55.55

Distributor Cap - For 4 Cylinder Clip Type Cap for Delco Distributors. B, C, (CA engine serial number CE-149840 and up), D10, D12, D14, D15, D17, (WC, WD, WD45 serial number 136318 and up). Replaces Delco 811735 and 70225733. (Part No: 1750411M91)
$6.60

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models B, IB, C, G, CA, WD, WD45, WC, WF, D10, D12, D14, D15, D17, D19, RC. Replaces 225734 & 70225734. (Part No: 1900119)
$6.75

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits tractor models B, C, IB, RC, WC, WD, WF, CA, D10, D12, D14, D17, D19, G, WD45, D15, H3, I40, I400, I500, I60, I600. With 1112461, 1112601, 1112655 1111411 or 1112607 Delco Distributor and Clip Held Cap. Replaces: bushing: 225773, 70225773, 0.005 inch shim washer: 225797, 70225797, 0.034 inch washer: 250977, 70250977, 0.010 inch shim washer: 4050123, 74050123. (Part No: ABC3007)
$22.95

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Allis Chalmers with Delco 1112461, 1112601, 1112655, 1111411, 1112607, 1112609. Replaces: 225791, 225792, 225793, 225794, 225795, 70225791, 70225792, 70225793, 70225794, 70225795 (Part No: 1904376)
$15.00

Distributor, Rebuilt - For tractor models B, C, CA, WC, WD, WD45, WF and D14 all 1111735, 1111411 or 1111745 labeled distributor. A refundable $80.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Also NOTE: Note that if the core is not a complete and good core, part or all of the core charge will not be refunded. Typically, most cores need a shaft replacement and the cost of the shaft will be deducted from the core charge. This is usually $30. (Part No: 1111411)
$131.10

Electronic Ignition Conversion Kit, 12 Volt Negative Ground - This Electronic Ignition Kit is for Delco Distributors in the below listed models. Replaces points & condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower, improve fuel economy. Compatible with all 12-volt negative ground systems and 6-volt systems that have been converted to 12-volt negative ground. For tractor models G, B, C, CA, WC, WD, WF, WD45, D10, D12, D14, D15 and D17. NOTE: On those models that use a Distributor Dust Shield, you may be required to drill a larger hole in the Dust Cover for the Electronic Parts to fit properly. (Part No: 1142)
$106.75

Fairbanks Morse, Condenser - Services Fairbanks Morse Magneto: J1A, XCE1B, J1B, XYE1B88F, JE1A, X1-2B, J2A, XF2A, JF2A, XF2A, J2B, XF2B, JF2B, X4A, J4A, X4B, JG4A, XV4C73, J4B, XR4A, X1A, XR4B, X1B, K2A. Tractors: B, C, CA, RC, WC, WD, U, UC. (Part No: AXMR2433)
$8.51

Fairbanks Morse, End Cap Cover - Services Fairbanks Morse Magneto: FM-J4, FM-OX4, FM-B1 magnetos. Tractors: B, C, CA, RC, WC, WD, U, UC. (Part No: C800)
$92.80

Fairbanks Morse, End Cap Less Gear - Services Fairbanks Morse Magneto: FM-JF2, FM-J4 magnetos. Tractors: B, C, CA, WC, RC, WD, U, UC. (Part No: CX2430)
$91.44

Fairbanks Morse, Molded Coil - Services Fairbanks Morse Magneto: FM-JE4, FM-X4, FM-XE4 magnetos. Tractors: B, C, CA, RC, WC, WD, U, UC. (Part No: R2477C)
$69.70

Fairbanks Morse, Point Set - Services Fairbanks Morse Magneto: FM, FM-H, FM-K, FM-OH, FM-R magnetos. On tractors, B, C, CA, RC, WC, WD, U, UC. (Part No: P2437)
$70.61

Fairbanks Morse, Point Set - Services Fairbanks Morse Magneto: FM-J, FM-JE, JM-JG, FM-T magnetos. Tractors B, C, CA, RC, WC, WD, U, UC. (Part No: R2437POINTS)
$23.55

Fairbanks Morse, Rotor - Services Fairbanks Morse Magneto with 2 piece cap: FM-J4, JV4, XV4 magnetos. Tractors: B, C, CA, RC, WC, WD, U, UC. (Part No: M2765)
$14.61

Generator Cutout Assembly - Voltage Cut-out (6 Volt), Allis Chalmers: Fits: B, C, CA, RC, WC, WD45, WF. (Part No: 1500199M91)
$22.43

Magneto - For 4 cylinder Models: B, C, CA, RC, WC, WD, U, UC. (Part No: 236684)
$439.09

Magneto Cap - For Wico Magneto. Models B, IB, C, RC, WC, WD, WF. Fits XH894, XH3001 and XB2065 Magnetos. (Part No: FXG2002A-2)
$58.10

Magneto Cap Gasket - This Magneto Cap Gasket fits tractor models: B, IB, C, RC, WC, WD, and WF all with Wico magneto model: XH894. (Part No: XHGK)
$3.98

Magneto Coil - For Wico Magnetos. Models B, IB, C, RC, WC, WD, WF. Fits XH894, XH477B, XH1042 (Part No: FXH2403)
$55.55

Magneto Condensor - For Wico Magneto. Models B, IB, C, RC, WC, WD, WF. Fits XH894, XH477B, XH1042, XH3001 magnetos. (Part No: FXH2024)
$15.10

Magneto Mounting Gasket - For XH894 Wico Magneto. Models B, IB, C, RC, WC, WD, WF. (Part No: ABC556)
$2.40

Magneto Point Set - For XH894 Wico Magneto. Models B, IB, C, RC, WC, WD, WF. Fits XH894, XH477B, XH1042, XH3001, XH909 (Part No: FXH2100B)
$22.23

Magneto Rotor - For Wico Magneto. Models B, IB, C, RC, WC, WD, WF. Fits WICO XH894, XH3001, XB2065 & XH2659 magnetos. (Part No: FXG1008)
$33.61

Resistor Kit - Resistor Kit. Used with Voltage Regulator number VR1813 for conversion using cut-out, Delco 1116809. For B, C, CA, WC, WD, WD45, WF. (Part No: VRK1815)
$37.76

Spark Plug - Replaces Autolite AL216, AL7, AL295 and Champion H8, H8J, H10, H11, H12, J8 spark plugs. 14mm thread diameter, 3/4" reach, 13/16" hex. (Part No: AL295)
$2.40

Starter Drive - For tractor models 6 volt 10 teeth D-12, D-14, WC, WD, WD45, WF, D-10 SN# <3501. Replaces 1859020, 1868804. (Part No: 74044454)
$38.04

Starter Drive - Starter Drive - WC, WF, WD, WD45 (models using Delco 1107017 or 1107951) - D10, D12, D14 (models for 1957-1960 using Delco 107474 or 1107466). Replaces 1868804. (Part No: 565549)
$20.39

Starter Drive Housing - For tractor models B, IB, C, CA, RC, WC, WD, WD45, D10, D12, D14. All with Delco starters 1107466, 1107006, 1107017, 1107024, 110743, 1107044, 1107045, 1107046, 1107096 or 1107951. (Part No: 1879156)
$67.07

Starter Drive Spring - Starter drive spring For B, C, CA, D10, D12, D14, WC, WD, WD45, WF Tisco has drive and springs for less money (Part No: 1860639)
$35.51

Starter Drive, Improved Style - This improved style starter drive is a positive ratchet style. For models WC, WF, WD, WD45 using Delco starter 1107017 or 1107951. Also for models D10, D12 and D14 using Delco starter 107474 or 1107466. Replaces 1868804. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Part No: 565549-New)
$19.43

Starter Repair Kit - Starter Repair Kit. Tractors: WD, WD45 with starter 1107951. WC and WF with starter 1107017 (Part No: SRK110)
$6.99

Starter Switch - Manual Foot Switch. For tractor models B, C, CA, G, RC, (WC serial number 74330 and up), WD, WD45, (WF serial number 1904 and up). Replaces 70226128, 70217292, 70226126. (Part No: 1925781)
$9.35

Starter, Rebuilt - For tractor models WC, WF 1944-1950 with Delco starter. Replaces 1107006. ++ Add $60.00 core IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1107017)
$303.42

Voltage Regulator, 6 Volt - Voltage Regulator, 6 volt, positive ground, saddle mount, 4 terminal. For tractor models B, C, CA, IB, WC, WD, WD45, WF. Replaces Allis Chalmers: 4514722, 74514722. Replaces Delco Replaces: 1118265, 1118305, 1118786, 1118790. (Part No: VR1813)
$38.53

Wiring Harness, Complete - Restoration quality. Includes engine harness, light harness, instructions, and cutout relay. For tractor models RC, WC, WF with cutout relay. (Part No: 600462)
$166.81

Engine Bearings
Cam Bearing, Gas Engine - Set of 3. For W, WC, WF, W25, WD, all with 201 CID 4 cylinder Gas Engine. For WD45 and D17 with 226 CID 4 cylinder Gas Engine. (Part No: 70229953)
$25.52

Main Bearing Set, 201 and 226 CID Gas, .020 - For tractor models W, W25, WC, WD, WD45, WF. Engine: 201 and 226 CID Gas.(2.43" journal) Size is .020. This is 1 complete set for engine. (Part No: 70228620-020)
$125.00

Main Bearing Set, 201 and 226 CID Gas, .030 - For tractor models W25, WC, WD, WD45, WF. Engine: 201 and 226 CID Gas.(2.43" journal) Size is .030. This is 1 complete set for engine. (Part No: 70228830)
$121.85

Main Bearing Set, 201 and 226 CID Gas, STD - For tractor models W, W25, WC, WD, WD45, WF. Engine: 201 and 226 CID Gas.(2.43" journal) Size is STD. This is 1 complete set for engine. (Part No: 70228620)
$125.00

Main Bearing Set, 201and 226 CID Gas, .010 - For tractor models W, W25, WC, WD, WD45, WF. Engine: 201 and 226 CID Gas.(2.43" journal) Size is .010. This is 1 complete set for engine. (Part No: 70228620-010)
$125.00

Rod Bearing Set - For W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). Available in standard, .010 or .020. Specify size when ordering. (Part No: CRK-AW)
$45.42

Rod Bearing Set, .010 - .010 inch. For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Part No: CRK-AW-010)
$48.07

Rod Bearing Set, .020 - .020 inch. For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Part No: CRK-AW-020)
$48.07

Rod Bearing Set, Standard - For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Part No: CRK-AW)
$45.42

Rod Bearing, 201 Gas, .010 - Individual connecting rod bearings. .010 inch. For tractors: W, WC, WF, WD, WD45G, D17G, 170G. (Part No: 231125-010)
$14.12

Rod Bearing, 201 Gas, .020 - Individual connecting rod bearings. .020 inch. For tractors: W, WC, WF, WD, WD45G, D17G, 170G. (Part No: 231125-020)
$14.12

Rod Bearing, 201 Gas, STD - Individual Connecting Rod Bearings. Standard. For tractors: W, WC, WF, WD, WD45G, D17G, 170G, B, C, CA, RC. (Part No: 231125)
$14.12

Rod Bearings, Early - For the early models with 2 inch journals. Only available in Standard. For tractor models W, W25, WC, WD, WD45, WF. Engine: 201 CID Gas This is 1 pair for 1 rod. Order 4 for complete engine. Oversize of .005 may be available.... call for availability. (Part No: 70223619)
$25.73

Engine Gaskets
Crankshaft Rear Seal - This 2 piece rear crankshaft seal is for the 201 gas engine in models WC, WD, WF, W25. This is a 2 piece soft seal. (Part No: 70227120)
$4.40

Crankshaft Seal, Front - This Front Crankshaft Seal is 2.01 inches outside diameter. If you need one that is 1.9375 inches outside diameter, you need part number 70225806 which we do not have. For tractor models (60H, B, B15, C, CA, IB all with engine serial number CE-177730 and up), W25, WC, WD, WF. (Part No: 70224929)
$6.71

Full Gasket Set - For W, WC, WD, WF all with 226 CID gas engine. Comes with crank seals. (Part No: FS3162)
$107.64

Head Gasket - Cylinder Head Gasket. For tractors: W, WC, WF, WD, WD45, D17, 170. All with gas engines. (Part No: 70229406)
$44.90

Head Gasket Set - For GAS engine in: D17, W, W25, WC, WD, WD45, WF. Includes Upper gasket set with head gasket. (Part No: 70277286)
$64.53

Intake & Exhaust Manifold Gasket Set - For tractor models D17, WC, WD, WD45, all with gas engine. Replaces 299958, 70229958 (Part No: 70229958)
$12.45

Oil Pan Gasket - 6 piece pan gasket set. For 201 and 226 CID 4 cylinder gas engines on: W, WC, WF, W25, WD, WD45, D17, 170. (Part No: 70229860)
$12.35

Valve Cover Gasket - GASKET. For tractor models D17, W, W25, WC, WD, WD45, WF. All with gas engines. (Part No: 70255297)
$13.61

Engine Rebuild Kits
Basic Engine Kit - For W, WC, WF, W25, WD with 201 CID 4-cylinder gas enine. This basic kit contains a sleeve and piston kit with rings, pins and retainers, an overhaul gasket kit and pin bushings. No bearings. (Part No: BEKA1120-LCB)
$466.00

Basic In-Frame Overhaul Kit - Basic In-Frame Kit for 201 CID 4 cylinder gas engine, overbore from 4 inches to 4-1/8 inches. Contains: PK120 sleeve and piston kit with rings and pins, 70277286 upper gasket set with head gasket, 70229860 oil pan gasket kit. For W, W25, WC, WD, WF. (Part No: BIFA1120)
$426.70

Cylinder Head Valve Overhaul Kit - Contains intake and exhaust valves, springs, guides and retainers. For tractor models W, WC, WF, W25, WD (with 4-cylinder 201 CID gas engines) and WD45 (with 4-cylinder 226 CID gas engine). (Part No: VOKA201)
$176.89

Engine Overhaul Kit - For AC W, WC, WF, W25, WD (201 CID 4-cylinder Gas) Contains Sleeve and Piston Kit (sleeves, pistons, pins, retainers, top chrome and oil control ring set, overbore from 4 inches to 4-1/8 inches). Complete Gasket Set with main bearing seals where required. Cam Bearings. Main Bearing Kit. Connecting Rod Bearing Kit. Valve Parts (intake and exhaust valves, springs, guides and keys). Available with Std., .010 or .020 bearings. Kit also available without bearings as EOK1120-LCB. (Part No: EOK1120)
$797.64

In-Frame Overhaul Kit - 4 1/8 inch overbore. For W, WC, WD, WF with G201 Gas Engine. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: R3308-IFK)
$616.09

Overhaul Kit - Engine Overhaul Kit. Overbore of 4-1/8 inches. Kit contains sleeve and piston kit, cam bearings, gasket set, intake valves, exhaust valves, springs, guides, and keys. For tractors: W, WC, WF, W25, WD. (Part No: EOK1120-LCB)
$650.09

Overhaul Kit - 4 1/8 inch overbore. For W, WC, WD, WF with G201 Gas Engine. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: R3308-OHK)
$640.50

Engine Parts
Governor Weight - This Governor Weight D17, WC, WD, WD45, WF, 170, 175 with 201 or 226 cubic inch 4 cylinder gas with engines. Replaces: 229980, 70229980 (Part No: 70229980)
$27.50

Governor Weight Pin and Clips - This Pin with Clips is used to secure part number 70229980. Two used per tractor. Sold individually. Replaces part numbers 70211368, 70207719, 211368, 207719 (Part No: 70211368)
$7.95

Hand Crank Holder Brackets - Both Front and Rear Clips. For tractor models RC, WC, WD, WD45, WF. (Part No: 208443)
$14.36

Hand Crank, Starter - With Spinner. For tractor models WC, WD, WD45, WF, RC. Replaces U3972. (Part No: 70216933)
$57.96

Pushrod - Pushrod, new. Sold individually. 11.017 inch overall length, 0.314 inch outside diameter. D17, WC, WD, WD45, WF, 170, 175 (with 201 CI, 226 CI gas/LP engines). Replaces: 70203018, 203018. (Part No: 70203018)
$25.50

Ring Gear - Starter Flywheel Ring Gear. For tractor models WC, WD, WD45, WF. 12.68 inches outside diameter. 11.725 inside diameter. .50 inch thick, 100 tooth. (Part No: 70208132)
$42.87

Valve Service Kit - For tractor models D17, W, W25, WC, WD, WD45, WF. All with either 201 or 226 CID 4 cylinder gas engine. Contains: springs, guides, locks, (no valves). (Part No: VSKA201)
$60.72

Valve, Exhaust Set - This is a set of 4 exhaust valves for W, WC, WF, W25, WD all with 201 CID 4 cylinder Gas engine. For WD45 and D17 with 226 CID 4 cylinder Gas engine. (Part No: 70241527)
$47.40

Valve, Intake Set - This is for a set of 4 intake valves, For W, WC, WF, W25, WD all with 201 CID 4 cylinder Gas engine. For WD45 and D17 with 226 CID 4 cylinder Gas engine. Order 1 and receive 4 valves. (Part No: 70209132)
$44.66

Engine Pistons and Sleeves
Piston Sleeve - For 4 1/8 inch bore piston. For tractor models (170, 175, D17 gas), W25, WC, WD, WD45, WF. (Part No: SW32)
$53.05

Sleeve & Piston Kit - Contains sleeves, pistons, pins, retainers, top chrome and oil control ring set. Overbore from 4 inches to 4-1/8 inches. For tractor models W, WC, WF, W25 and WD with 201 CID 4-cylinder gas engines. (Part No: PK120)
$432.53

Engine Rings
Piston Ring Set - Overbore 4-1/8 inches for 201 CID 4 cylinder gas engine. Contains 12 compression rings at 3/32 inch, 4 oil rings at 1/4 inch. Contains: Ring set for 4 pistons~ For tractors: W, WC, WF, W25, WD. For 262, D19, GLEAMER C. (Part No: PRS120)
$53.88

Piston Ring Set - Complete set. 4 inch standard bore. Comes with 3 compression rings 1/8 inch and 1 oil ring 3/16 inch. For tractor models (W, W25, WC, WD, WF all with 201 CID gas engines), (WD45, 170, D17 all with 226 CID gas engines). (Part No: 70230091)
$84.85

Exhaust System
Exhaust Stack, Chrome - This is a Chrome Straight Stack, Double Walled. 29 inches tall. 3 1/2 inches outside diameter. Vertical Exhaust Stack for Allis-Chalmers GAS ENGINE models: WC, WD, WD45, and D17 to serial number 42000. (Part No: R4446)
$114.61

Exhaust Stack, Chrome - Curved, double wall, Chrome Stack. 29 inches tall. 3 1/2 inch outside diameter. For GAS Models: WC, WD, WD45, D17 to serial number 42000. (Part No: R4447)
$145.87

Intake and Exhaust Manifold - For D17 series III, WC, WD, WD45, all with gas engine. Intake and Exhaust Manifold, non threaded outlet. Manifold has improved larger throat. Uses Muffler part number 70234494. Also replaces OEM number 70224782. Gasket set part number 70229958, included in this set. (Part No: 70229416)
$207.79

Manifold Stud - Manifold Stud. Fits tractor models WC, WD, WD45 (Early), WF (Gas Only). 4-1/2 inches coarse threads both ends, 3/8 inch diameter. 6 used per engine, sold individually. Replaces: 203072, 70203072. (Part No: 70203072)
$5.18

Muffler - Round Muffler, after 106509 - M28A. For WC, WF (Part No: 70210137)
$28.28

Fuel System / Air Intake
Air Cleaner Hose - Hose, air cleaner to carburetor. For tractor models WC, WD, WF. Measures 1.472 inch inside diameter and 8 1/4 inches in length. (Part No: 70208114)
$9.29

Air Cleaner Hose Clamp - This clamp is used on B, C, CA, D10, D12, D14, RC, WC, WD as an air cleaner hose clamp. Works for hose outside diameter from 1 3/4 inches to 2 inches. It Replaces: 921913, 910144. (Part No: 608287)
$3.75

Carburetor Float - This carburetor float is 2.25 inches wide and is used for the following Zenith carburetor models: 8691, 9636, 9635, 9804, 9805, 10697, 9706, 9705, 10699, S906, 10698, S1204, 10903, 10902, 8561, 8691, 11141, 11142, 12401, 12749, 12401, 12749, 8781, 8979, 9707, S1203, 10981 and for tractor models: B, C, CA, D10, D12, WC, and WD. (Part No: CTP28)
$16.50

Carburetor Float - For tractor models B, C, CA, RC, WC, WF, D14, D15. Carburetor Float for Marvel Schebler with small bowl. Carbs: TSX138, TSX422, TSX154, TSX159, TSX186, TSX264, TSX305, TSX363, TSX380, TSX422, TSX470, TSX486, TSX670, TSX701, TSX815, TSX844. (Part No: 9N9550A)
$8.48

Carburetor Fuel Needle - Main Jet Adjusting Needle Assembly for Zenith carburetor series 61 and 62, model numbers: 9707, 10981, 12401, 12749, 13876. For D10, D12, W, WC, WD, WF. (Part No: 71-28)
$9.68

Carburetor Kit, Basic - For ZENITH carbs 9797A, 9797C, 10981A, 8979, or Allis Chalmers carbs 213348-3, 224749, 209312 For tractors: WC, WD, WF. (Part No: BK25V)
$27.63

Carburetor Kit, Basic - FOR MARVEL SCHEBLER CARBS TSX159, TSX422 OR ALLIS CHALMERS CARBS 222088, 224750 For W, WC, WD, WF (Part No: BK27V)
$18.73

Carburetor Kit, Basic - Kit for Zenith 8561, 8691, 9636, 9635, 9804, 9805, 106977, 9706, 9705, 10699, S906, 10698, S1204, 10903, 10902, 11142, 12401, 12749, 8781, 8979, 9707, S1203, 10981 carbs used on B, C, CA, D10, D12, WC, WD. (Part No: Z101)
$19.50

Carburetor Kit, Basic - Kit for Marvel TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX670, TSX701, TSX815, TSX844 carbs used on B, C, CA, D14, D15, WC, WD. (Part No: MS101)
$16.50

Carburetor Kit, Basic - Kit for Zenith 7078, 7971 carbs used on WC. (Part No: Z109)
$26.25

Carburetor Kit, Basic - Fits Zenith carburetors 13339, 11532, 13876, 13863, 13714, 12708, 14987, 12825. For tractor models B, B15, C, D10, D12, CA, IB, R, W, WC, WD. (Part No: K2119)
$24.00

Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 13876, 12522, 12522B. (Part No: BK44V)
$26.25

Carburetor Kit, Complete - For W, WC, WD, WF with Marvel-Schebler TSX159, TSX422, or Allis Chalmers carburetors 222088, 224750, 70222088, 70224750. Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. (Part No: C527V)
$33.20

Carburetor Kit, Comprehensive - Comprehensive Carburetor Kit For Marvel-Schebler: TSX159 (Allis Chalmers part number 222089), TSX422 (Allis Chalmers Part Number 224750). Contains all parts shown. For tractor models W, WC WD and WF. (Part No: R7822)
$54.51

Carburetor Repair Kit - Complete carburetor repair kit for Zentih carburetors 8879 or Allis Chalmers Carb 209312. For tractor models WC, WF. (Part No: C525AV)
$38.07

Carburetor, New - Aftermarket replacement for 12522 outperforms the original Marvel carburetors: TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832. Linkage is reversible. This carburetor comes with studs which attach to the carburetor and will not work with those applications that the studs need to attach to the manifold. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. 1 year warranty. For models using the above listed carburetor numbers on models B, B-15, C, D10, D12, CA, IB, R, W, WC, WD. (Part No: 12522B)
$220.73

Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: B, B-15, C, D10, D12, CA 1952-56, IB, R, W, WC, WD Crawler. Replaces TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832. This carburetor comes with studs that attach to carburetor. THIS WILL NOT WORK IN THOSE APPLICATIONS THAT STUDS MUST BE USED IN THE MANIFOLD. 2 5/16 INCHES CENTER TO CENTER ON MOUNTING BOLTS. Made in USA, 1 year warranty. (Part No: 12522)
$372.60

Carburetor, Rebuilt - Fits WC (1934-1937) - replacement for OEM 0-7178, 7078. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1112-CARB)
$157.70

Carburetor, Rebuilt - Fits WC (1938 & UP) - replacement for OEM 10698, 10698A. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1114-CARB)
$157.70

Carburetor, Rebuilt - Fits WC, WD - replacement for OEM 10981A. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1115-CARB)
$157.70

Carburetor, Rebuilt - Fits WC 1938 & UP, WD, WD45 - replacement for OEM TSX159, TSX422. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1116-CARB)
$157.7

Carburetor, Rebuilt - This Zenith style aftermarket replacement for 12522. Replaces Marvel numbers TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832. Linkage is reversible. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. For models using the above listed carburetor numbers on models B, B-15, C, D10, D12, CA, IB, R, W, WC, WD. A $50.00 core charge will be added to the price and is refundable when you send your core to us and it is verified to be a rebuildable core. (Part No: 12522R)
$157.71

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. Used on Allis Chalmers B, C, CA, D10, D12, D14, (D15 Gas To Serial Number 9001), (D17 Gas to serial Number 42000), (D19 Gas To serial Number 12000), G, I40, I400, I60, I600, 170, 175, 180, IB, RC, WC, WD, WD45, WF. Replaces original part numbers 208362, 70208362. Gasket may be rubber or cork, depending on availability. (Part No: NAA9160A)
$1.95

Fuel Tank Cap - For Tractor Models B, C, CA, G, IB, RC, WD, D10, D12, D14, D15, D17, D19, I40, I400, I60, WC, WF, WD45, 170, 175, 180, 185, Backhoe: I600. Replaces: 253690, 70253690. This is a Non-Vented Cap. 7/8 inch outside diameter, 2 11/16 inch inside diameter, 1/4 inch high. Zinc Finish. 1.850 inches edge of tang to edge of tang. (Part No: D5NN9030A)
$5.81

Sediment Bowl Assembly - Large bowl, single inlet type. Used on; (D15 Gas serial number 9001 and up and All Diesel using 2.315 Long Glass Bowl), (D17 Gas serial number 42001 and up and all Diesel using 2.315 Long Glass Bowl), (D19 Gas serial number 12001 and up and all Diesel using 2.315 Long Glass Bowl), (D21, WD45, 170, 175, 180, 185 all 2.315 Long Glass Bowl), (U Gas only using 2.315 Long Glass Bowl and single outlet ), (UC Gas only using 2.315 Long Glass Bowl and single outlet), (190, 190XT Gas, Diesel. Using 2.315 Long Glass Bowl). Fittings are 3/8 inch pipe inlet, 1/8 inch pipe outlet, 2.315 inch tall glass bowl. Replaces: 237946 and 70237946. (Part No: S.61581)
$16.52

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 208325, 208363, 70208325, 70208363 (Part No: 49923D)
$3.09

Throttle Lever Friction Block - For tractor models WC, WD, WD45, WF. 1.245 inches overall length. 1.225 inches wide. 0.500 inch inside diameter. Replaces 222454, 70222454. (Part No: 222454)
$13.43

Throttle Lever Knob - For tractor models CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. (Part No: 220901)
$7.35

Gauges
Ammeter - For tractor models B, C, CA, RC, WC, WD, WD45, WF. (Part No: 70275840)
$9.15

Oil Gauge - Oil pressure gauge. For IB, B, C, CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF (Part No: 70207834)
$16.88

Oil Pressure Gauge - White Face. 30 psi, engine mounted. For tractor models B, IB, C, CA, G, RC, WC, WF, WD, WD45. Replaces 70207834. (Part No: 207834)
$22.04

Oil Pressure Gauge - For tractor models B, C, CA, WC, WD, WD45. This oil pressure gauge reads up to 50 psi and has a 2" body. Replaces 70226967, 70228719, 9A550. (Part No: 9N9273A)
$11.84

Oil Pressure Gauge 1940-49 - Black Bezel, White Face. No studs. For tractor models B, IB, C, CA, WD, WF, WC, WD45. Replaces: OEM numbers 70207834H, 70207834V and 70207834. (Part No: 2348803-B)
$15.33

Oil Pressure Gauge 1949-57 - Orange Bezel, White Face. Replaces OEM mnumber 70207834H. No studs. For tractor models B, IB, C, CA, WD, WF, WC, WD45. (Part No: 2348803-O)
$11.24

Oil Pressure Gauge After 1957 - Chrome Bezel, White Face. Replaces OEM number 70207834H. No studs. For tractor models B, IB, C, CA, WD, WF, WC, WD45. (Part No: 2348803)
$15.30

Temperature Gauge - For tractor models B, C, CA, RC, WC, WD, and WD45. Stem is 3 3/8 inch overall length. This gauge screws into top radiator hose inlet. (Part No: 70213675)
$27.00

Lights
Headlight Assembly, 6 Volt - For tractor models D10, WC, WF, WD, WD45. (Part No: 70236969)
$44.34

Headlight Gasket - This Headlight Gasket is used on original Tear Drop headlights. It is rubber and comes with staple, like the original. Replaces 53527D, AA3239R (Part No: 53527D)
$3.53

Headlight, 12 VOLT - 12 Volt 5 inch diameter light With 8.5 inch mounting tube. For WC, WD, WD45, RC. OEM number 210204. (Part No: 1030005)
$60.03

Oil System
Oil Filter - Oil Filter Cartridge, threaded neck type can. For GAS engines on: B, C, CA, G, IB, RC, WC, WD, WF, WD45, D10, D12, D14, D15, (D17 prior to series IV serial number less than 24000) and others - verify part number. (Part No: 70240912)
$14.72

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Uses EBU6734A washer, sold separately. Replaces 205060, 224994, 225585, 225657, 226408, 4026437, 74026437. (Part No: C5NE6730B)
$2.85

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B Oil Drain Plug. (Part No: EBU6734A)
$1.25

PTO / Driveline
PTO Seal - Seal for D10, D12, D14, D15, early WC before serial number 74330, early WF before serial number 1336. 1.375 inch inside diameter x 2.378 inch outside diameter x .312 inch width. (Part No: 70244961)
$7.53

PTO and Belt Pulley Lever Knob - Plastic Knob, 3/8 inch fine thread. For tractor models WC, WF, WD, WD45. (Part No: R4572)
$5.39

Paint
Paint, Persian Orange #1, 1 Quart - This Allis Chalmers Persian Orange (#1) was use until 1960 on chassis for models E25-40, U, All-Crop, UC, A, B, C, CA, G, RC, WC, WF, WD, WD45, (Crawlers M, K, L, S), D10, D12, D14 and D17. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP282QT)
$17.55

Paint, Persian Orange #1, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Allis Chalmers Persian Orange (#1) was use until 1960 on chassis for models E25-40, U, All-Crop, UC, A, B, C, CA, G, RC, WC, WF, WD, WD45, (Crawlers M, K, L, S), D10, D12, D14 and D17. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP282SP)
$44.19

Paint, Persian Orange, 1 Gallon - This Allis Chalmers Persian Orange (#1) was use until 1960 on chassis for models E25-40, U, All-Crop, UC, A, B, C, CA, G, RC, WC, WF, WD, WD45, (Crawlers M, K, L, S), D10, D12, D14 and D17. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP282GAL)
$44.00

Seats
Pan Seat - 19 inches wide. Fixed Pan Seat. C, CA, RC, WC, [ WD, WD45 (using 1 bolt Seat Pan) ], WF. Replaces: 200145, 218102, 225050, 70225050. (Part No: 8N400)
$35.12

Sheet Metal / Body Parts
Battery Box - This battery box is for tractor models RC, WC, WF. Replaces 224539. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 224539)
$72.50

Fender, LH - For tractor models WC styled, RC. Mounting bracket included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 720186)
$211.58

Fender, RH - For tractor models WC styled, RC. Mounting bracket included. Replaces 70208207. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 720187)
$211.58

Front Weight - This front weight fits the following tractor models: D15, D17, D19, RC, WC, WD, WD45 (Gas and LP only, will not fit Diesel), and WF. Replaces part numbers: 227272 and 70227272. DUE TO THE WEIGHT OF THIS ITEM AN ADDITIONAL $50 WILL BE ADDED TO THE STANDARD SHIPPING CHARGE. IF YOU ARE ORDERING ONLINE, THIS CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECIPT IS PRINTED. (Part No: 227272)
$156.98

Front Weight 2 Piece Anchor Kit - This two piece front weight anchor kit contains a left and right anchor for the weight matching part number: 227272. This kit fits the following tractor models: RC, WC, WD45, and WD. Also replaces part numbers: 227273 and 70227273 (Part No: 227273)
$36.75

Front Weight Anchor Rod - 7-3/4 inches overall length. HOLDS UP TO 3 FRONT WEIGHTS. For tractor models: RC, WC, WD, WD45 Gas or LP Only, (will not Fit WD45 DIESEL), WF. Replaces: 70227275, 227275227275. (Part No: 227275)
$16.34

Front Weight Anchor Rod - For tractor models: RC, WC, WD, WD45 gas and LP, WF. 9-1/4 inches overall length, HOLDS UP TO FOUR 22727 FRONT WEIGHTS. Replaces: 70236047, 236047. (Part No: 236047)
$18.76

Step Kit - This is a 2 piece step kit for models WD and WD45. This will fit the WC model if mounting holes are drilled. Mounting hardware not included. Comes with a Power Coated Orange paint. Both steps mount to the left side frame rail in front of the rear tire. (Part No: ACWDSTEPS)
$116.40

Toolbox - Fender mount, 5-3/8 inches x 11 inches x 4 inches. For tractor models WC, WF. (Part No: 70208446)
$58.14

Toolbox - Fender mount, 15 inch x 5-1/2 inch x 3-3/4 inch. Fits WC, WD, WD45, D10, D12, D14, D15, D17. (Part No: 70228924)
$51.03

Steering
Steering Wheel - Steering wheel, 3 spoke. 18 inch diameter, 7/8 inch shaft. Round hub with pinhole. For tractor models WC, WD, WD45, (D14 serial number 19001 and up), (D17 serial number 24001 and up). Replaces: 70229677, 70202260, 229677, 202260. (Part No: 70229677)
$40.45

Steering Wheel - For WD, WD45, Styled, WC, Early D14, This steering wheel is for tractor models D15, and D17 with 18 inch diameter, 7/8 inch Smooth Hub with pin hole. Replaces OEM numbers V2260 and 202260. (Part No: 202260)
$44.85

U-Joint - Steering universal joints assembly kit. For RC, WC, WD, WD45. This joint is non repairable and must be replaced when worn out. (Part No: 202152)
$68.46

Wheels
Bearing Cone - Inner cone for front wheel bearings. For tractor models WC, WD, WD45, D10 (serial number 3501 thru serial number 9000), D12 (serial number 3001 thru serial number 9000), D14, D15, D17 (prior to serial number 42000). Replaces 2776. (Part No: 70222214)
$21.66

Bearing Cup - Outer cup for front wheel bearings. For 170, 180, 190, D14, D15, D17, D19, WC, WD, WD45 (Part No: 70209983)
$6.45

Bearing Cup - Inner cup for front wheel bearings. For tractor models D10, D12, D14, D15, D17, WC, WD, WD45. (Part No: 70209987)
$6.71

Front Wheel - 4-1/4 x 16, five bolt, 3 3/8 pilot hole and 3 inch bolt spacing center-to-center. For WC, WD, WD45, D10, D12, D14, D15, and D17. Not for use with front end loader. Add $10 additional shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces: 232832, 70232832 (Part No: R0088)
$76.94

Front Wheel Bearing Kit - Front wheel bearing kit. Tractors: D10 (serial number 3501 to serial number 9000), D12 (serial number 3001 to serial number 9000), D10, D12, hi-clearance (prior to serial number 9000), WC, WD, WD45, D14, D15 (prior to serial number 9000), D17 (prior to serial number 42000). This kit is for one wheel only. Kit contains 1 each of the following part number 15288A SEAL, 70209987 CUP, 70222214 CONE, 70209983 CUP and 70209926 CONE. (Part No: 70228458)
$42.37

Front Wheel Seal Kit - For one wheel, contains one each of 70202103 retainer, 70202104 felt, and 70202105 metal washer. Tractors: RC, WC, WD, WD45, D10, D12, D14. Supersedes & replaces 228176 (Part No: 70208346)
$8.63

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify length before ordering. (Part No: 350719KIT)
$23.95



Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$239.98

Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4 inch throat, 1/8 inch diameter rivet punch. (Part No: RIVET_TOOL)
$33.95

Brake Rivet Tool, Large - Larger version of our Brake rivet tool. 3-3/8 inch deep throat x 2-1/8 inch high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)
$86.25

Cooling System
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: MBH1153)
$70.77

Radiator Drain Tap - This drain tap fits various tractor models as a radiator, engine block, and hydraulic drain tap. This is 1/4 inch NPT 18 thread. Please verify size and thread count before ordering. Replaces: 229210, 912415, 70229210. (Part No: C9NN8115A)
$2.79

Zip Leak - Industrial Radiator Stop Leak - A professional strength stop leak for tractors, trucks and construction equipment. Designed for large, heavy duty cooling systems. 5 oz. Bottle. Instructions/Usage: For average antique tractors (120-160 CID engines) use 1/4 bottle for 15 minutes, if the leak fails to stop, add an additional table spoon. (Part No: Z14012)
$10.23

Decals and Emblems
AC Diamond Decal - Black and White, Milwaukee, 6 inches x 6 inches. Vinyl Cut. (Part No: R4634)
$16.28

AC Diamond Decal - Orange Background, 5 1/2 inches x 5 1/2 inches. (Part No: R4633)
$10.10

AC Diamond Decal - Black and White, 4 inches x 4 inches, Vinyl Cut. (Part No: R4632)
$13.02

AC Diamond Decal - 1 inches x 1 inches orange, blue and gold printed on vinyl. (Part No: R5234)
$3.26

AC Logo Decal - 1-1/2 inches x 8 inches, Black and Orange on White. (Part No: R0675)
$6.51

AC Logo Decal - 3 inches x 18 inches, Black and Orange on White. (Part No: R0676)
$15.46

AC Logo Decal - 24 inches long, Black and Orange. (Part No: R0677)
$30.72

AC Logo Decal, New Style - 3-1/2 inches x 3-1/2 inches Black and Orange on White. (Part No: R5168)
$6.51

AC Logo Decal, New Style - 4-1/2 inches x 4-1/2 inches Black and Orange on White. (Part No: R5169)
$5.82

AC Logo Decal, New Style - 8 inches x 8 inches Black and Orange on White, printed on vinyl. (Part No: R5233)
$30.93

Power Shift Decals - One pair, white. For the cab on some Allis models. (Part No: R0674)
$25.14

Drive Train
Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$10.05

Electrical System
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1952 & newer). Just call us at 800-853-2651. NOTE

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. (Part No: 2348258)
$33.75

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Part No: ADR9209)
$12.71

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: ADR9209)
$12.71

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket For Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 8NL10302)
$11.93

Battery Hold Down - Universal hold down for batteries that measure 8 15/16 inches long and 6 13/16 inches wide. (Part No: NCA10718A)
$15.81

Battery Hold Down - Universal Battery Hold down. Verify your battery measurements. This will fit a 9 3/16 inches long and 7 3/16 inch wide battery. (Part No: 1111-0147)
$13.43

Battery Hold Down Bolts - PAIR - These "J" bolts measure 10 1/2 inches long and are universal for many batteries. Verify length. Price is for a pair. (Part No: 393161R1)
$10.47

Battery Thermal Wrap - This thermal battery wrap is used to keep your battery warm. It is 60 Watts and measures 28 inches long. (Part No: BTW28)
$22.50

Battery Thermal Wrap - 80 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW36)
$37.48

Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)
$53.81

Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$31.83

Coil - Universal 12V - Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt system without the resistor. Replaces: 74061737, 74514967. (Part No: D5TE12029AB)
$7.13

Coil Bracket - Universal Coil Bracket (Part No: R1940)
$3.50

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40611)
$45.43

Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40511)
$36.05

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Part No: 40111)
$45.43

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Coil has 1.5 Ohms of resistance. (Part No: 40011)
$44.90

Coil, High Performance (Chrome), 12 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40601)
$45.43

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40501)
$40.51

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 1.5 Ohms resistance. (Part No: 40001)
$40.51

Coil, Ultra High Performance (Black), Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45111)
$50.16

Coil, Ultra High Performance (Black), Oil Filled - Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011)
$43.40

Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix Flame Thrower II Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kitsor or any 6 volt system using the "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 0.6 Ohms of resistance. For use with Ignitor II Electronic Ignition Module. (Part No: 45001)
$44.66

Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25

STARTER - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! NOTE

Spark Plug - Extended tip, 14mm thread, 3/4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$2.73

Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$2.73

Spark Plug Wire Set, 4 Cylinder, Univeral - Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. (Part No: S2097)
$12.75

Spark Plug Wire Set, 4 Cylinder, Universal - This Universal spark plug wire set can be used with the Ignitor high performance electronic ignition conversion kits. Kit has 90 degree sparkplug boots and straight distributor boots. (Part No: CPN12259)
$12.92

Spark Plug Wire Set, Universal 6 Cylinder - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$15.00

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259)
$12.92

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.55

Stripper and Crimping Tool - Professional Fast and Easy tool for stripping and crimping electrical wires. (Part No: B1SB6718)
$21.20

Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.45

Terminal Kit - Deluxe solderless terminal and connector assortment. 175 pieces. Includes female slip ons, oval butt connectors, ring connectors, male slip ons, spade terminals, and wire splice. (Part No: B1SB22)
$34.19

Engine Gaskets
Seal Installer/Remover - This kit helps with the removal and installation of upper rear main seals on many tractor engines without removing the engine or the crankshaft. This kit contains a corkscrew removal tool, a T-handle, and a wire with a clip for pulling new seals into their place. It also includes 2 extra clips. (Part No: W84019)
$5.33

Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR)
$5.70

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Part No: PRM77BR)
$7.13

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicone. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Part No: PRM101BR)
$10.47

Engine Rebuild Kits
Lucas Assembly Lube - Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. It is useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152)
$4.52

Engine Parts
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Pistons and Sleeves
Cylinder Hone - For bores from 1 1/2 to 3 inches. Easily adjusts. Length of 7 3/4 inches. Comes with stones. Call for replacement stones. (Part No: B1SB1704)
$25.88

Engine Rings
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System
Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89020C)
$78.88

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89025C)
$92.67

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.75 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89027C)
$99.58

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89051C)
$117.23

Chrome Exhaust Stack - This Chrome Stack is single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Part No: 146520CHR)
$112.10

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89054C)
$115.52

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.75 inch inside diameter inlet. It is 4 inches outside diameter beyond the inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89375C)
$144.46

Chrome Exhaust Stack - This Chrome Stack is single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Part No: 146490CHR)
$131.51

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89057C)
$129.84

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89485C)
$159.35

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: L102236CHR)
$84.28

Muffler Clamp, 1-1/2 - New Clamp for 1-1/2 inch outside diameter muffler inlet. (Part No: MC112)
$2.75

Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Part No: MC114)
$3.98

Muffler Clamp, 1-1/8 - New Clamp for 1-1/8 inch outside diameter muffler inlet. (Part No: MC118)
$2.50

Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Part No: MC134)
$2.93

Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Part No: MC138)
$2.50

Muffler Clamp, 1-5/8 - New Clamp for 1-5/8 inch outside diameter muffler inlet. (Part No: MC158)
$2.93

Muffler Clamp, 1-7/8 - New Clamp for 1-7/8 inch outside diameter muffler inlet. (Part No: MC178)
$3.30

Muffler Clamp, 2 - New Clamp for 2 inch outside diameter muffler inlet. (Part No: MC200)
$2.91

Muffler Clamp, 2-1/2 - New Clamp for 2-1/2 inch outside diameter muffler inlet. (Part No: MC212)
$3.30

Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Part No: MC214)
$3.15

Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Part No: MC234)
$4.50

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Part No: MC300)
$4.50

Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Part No: MC312)
$4.75

Muffler Clamp, 3-1/4 - New Clamp for 3-1/4 inch outside diameter muffler inlet. (Part No: MC314)
$6.50

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Part No: MC400)
$7.50

Muffler Clamp, 4-1/2 - New Clamp for 4-1/2 inch outside diameter muffler inlet. (Part No: MC412)
$7.98

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Part No: MC500)
$7.98

Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$5.84

Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$6.84

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$6.69

Rain Cap - This rain cap is for a 3.00 inch pipe. (Part No: R1805)
$9.39

Rain Cap - This rain cap is for a 2.75 inch pipe. (Part No: R1804)
$10.02

Rain Cap - This rain cap is for a 1.50 inch pipe. (Part No: R1798)
$5.70

Rain Cap - This rain cap is for a 2.25 inch pipe. (Part No: R1801)
$7.23

Rain Cap - This rain cap is for a 3.5 inch pipe. (Part No: R1806)
$11.99

Rain Cap - This rain cap is for a 4.0 inch pipe. (Part No: R1807)
$9.80

Stainless Steel Clamp 2 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90869A)
$5.18

Stainless Steel Clamp, 2.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90871A)
$5.54

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90872A)
$5.94

Stainless Steel Clamp, 3 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90873A)
$5.57

Stainless Steel Clamp, 3.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90874A)
$5.81

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90875A)
$6.42

Fuel System / Air Intake
Carburetor Elbow & Strainer - Fits some Allis Chalmers models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Part No: 9N9553)
$4.83

Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

Fuel Filter, In-Line, 1/4 inch - Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Part No: 6511393)
$4.22

Fuel Filter, In-Line, 3/8 inch - Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Part No: BF836)
$4.79

Fuel Filter, In-Line, 5/16 inch - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. (Part No: BF840)
$4.14

Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Part No: BF7736)
$2.36

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$33.23

Fuel Tank Liner Kit - Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$56.83

Fuel Tank Repair Kit - Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4 inches long and holes up to 3/8 inches in diameter. NOT for plastic fuel tanks. (Part No: FTR180)
$21.14

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter (7/32)- 2.53 inch Overall Length. Outside diameter of screen is 0.375 of an inch. If the Insert (7/32) is too large, you can use a 7/32 drill bit to enlarge the hole in the fuel filter assembly. If the insert is to small, use foil to shim. (Part No: R7949)
$9.00

Fuel Tank Webbing, 3 Ft - Black woven nylon type material, .042 inches thick, 3 foot section. (Part No: FTW494)
$4.13

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$12.80

Marvel-Schebler Service Manual - This Service manual is a complete manual for all DLTX and TSX model carburetors. Comes with tractor carburetor principle of operation and overhaul step-by-step instructions. 21 Pages. (Part No: MAR_CARB_SV)
$9.95

Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: C1778R)
$1.20

Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Part No: PTSTOP)
$7.79

Gaskets
Gasket Material, Cork Rubber - 3/32 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR332)
$15.75

Gasket Material, Cork Rubber - 1/16 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR116)
$8.93

Gasket Material, Exhaust Manifold - 1/16 inch thick x 12 inches wide x 28-1/2 inches long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228)
$20.40

Gasket Paper, .0160 - .0160 inch x 18 inches x 98 inches long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844)
$15.79

Gasket Paper, .0275 - .0275 inch thick x 18 inches wide x 98 inches long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898)
$24.15

Gauges
Ammeter Gauge - 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)
$2.99

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)
$46.42

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch -24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)
$25.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)
$13.96

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Part No: IHS626)
$12.95

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.62

Temperature Gauge - Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$23.78

Temperature Gauge, Universal - For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$16.20

Temperature Gauge, Universal - Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Numeric Face. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch metal wrapped capillary line. (Part No: UTG25)
$22.02

Hitch / Drawbar
Center tube, Stablizer - Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT)
$17.69

Check Chain & Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A)
$12.09

HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four(4) of HP-4 (wire diameter 5/32 inch, length 2 15/16) inch, four(4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three(3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Part No: HPA15X)
$7.04

HITCH BALL 10000LB 2-5/16 - 2-5/16 BALL SIZE, 1-1/4 STUD THREAD, 2-1/2 STUD LENGTH, 10, 000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114)
$23.85

HITCH BALL 15000LB 2-5/16 - 2-5/16 inch BALL SIZE, 1-3/8 inch STUD THREAD, 2-5/8 inch STUD LENGTH, 15, 000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_)
$25.04

HITCH BALL 2000LB - 1-7/8 BALL SIZE, 3/4 STUD THREAD, 1-3/4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834)
$13.37

HITCH BALL 3500LB - Hitch ball. 2 inch ball size, 3/4 inch stud thread, 1-7/8 inch stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.48

HITCH BALL 5000LB - Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1/8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5/16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

Hair Pin Cotter Assortment - Hair Clips sizes from 1/16 x 1 3/8 to 3/16 x 3 1/4. Total of 141 pieces in 6 sizes. (Part No: B1SB16)
$30.35

LINCH PIN, 10 Pack - Package of 10 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516)
$3.30

Lift Arm Bushing - This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Part No: BUSH04)
$0.92

Linch Pins, Pack of 10 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$2.55

Linch Pins, Pack of 10 - Package of 10 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 10. (Part No: DKLP91)
$2.55

Linch Pins, Pack of 10 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long.***Enter 1 for package of 10*** (Part No: DKP316)
$4.17

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$227.70

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Part No: 49A29)
$23.36

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$30.85

Universal Stabilizer Chain Kit - Chain stabilizers, turnbuckle and chain links adapt to any size 3-point hitch, usually used on larger tractors. VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed and sold in pairs, less brackets. (Part No: SK102CH)
$50.48

Hydraulic System
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Part No: H42-2M-180)
$51.75

Hydraulic Parts, Universal - Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section. NOTE

Universal Pressure Gauge, Hydraulic - 200 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Part No: GG200)
$10.62

Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

Axle Nuts (5) - 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.69

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$1.94

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22)
$6.30

Blade Bolt Kit - Price is for each bolt with hardware. Price shown is for each, sold only in multiples of 2 items. For rotary cutter blade used on rotary cutters. Please verify dimensions before ordering: A = 1 1/8-12 inch, B = 3 1/2 inch, C = 1 3/8 inch, D = 1 inch, E = 9/16 inch, F = 1/2 inch, G = 2 1/2 inch, H = 1.492 inch(for 1 1/2 inch blade hole), I = 1.12 inches. (Part No: 63607)
$11.78

Bush Hog Axle Spacer Bushing - Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: SPB40)
$4.91

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$176.32

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: BH215)
$106.08

Caster Fork Assembly - New Style Fork style assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). Vertical shaft is 1.5 inches O.D., 8 inches in length. Fork spread is 6 inches. (Part No: 12528)
$92.76

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)
$19.95

HUB with BRG CUPS - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: BH1311)
$24.90

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$28.38

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)
$44.70

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)
$77.06

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166)
$97.46

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166)
$97.46

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)
$100.37

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)
$100.37

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)
$100.37

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163)
$109.42

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.56

Tail Wheel Assembly - 6 inch x 9 inch tail wheel assembly with laminated tire, less hub. 4 inch pilot, 5 bolt holes, 5-1/2 inch bolt circle. 5-1/4 inches wide, 21 inch outside diameter, 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)
$21.75

Lights
Halogen Work Light-Double Bulb - 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)
$51.42

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R)
$14.67

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2 inch x 6 inch weather resistant steel body (black), glass lens, flood pattern, 140 foot beam. Halogen bulb, 12 volt, 55 watt, replaceable. 12 foot cord with cigarette lighter plug. (Part No: L100MAG)
$43.12

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)
$75.13

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. (Part No: S.61357)
$11.21

Work Lamp, HID, Flood Light - Universal high intensity discharge flood light, 35 watt Xenon H3 lamp, size 4.725 inch width X 4.330 inch height X 5.512 inch length, internal ballast, hardened glass lens, far longer life span than halogen. 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$127.64

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40

Worklight 12 Volt - Red 12 Volt worklight with handle, on/off switch, swivels and rotates. (Part No: S.42792)
$29.92

Worklight 12 Volt Black - 12 Volt worklight with handle, on/off switch, swivels and rotates. Mounting holes measure 4 3/8 inch center to center. (Part No: S.67771)
$31.65

Miscellaneous
Canopy - 60 inches wide x 65 inches long, molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through molding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X)
$430.31

Canopy Mounting Kit, 2 Post - Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603)
$103.57

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604)
$65.44

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP hoop type ROP frames up to 52 inches wide with leg thickness up to 4 inch x 2 inch. (Part No: B6602)
$110.28

Canopy, Small Tractors - 45 inches wide x 60 inches long. Molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through molding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD)
$374.50

Deluxe Canopy, 3 Bow - Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100R)
$235.53

Deluxe Canopy, 3 Bow - This UNIVERSAL Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. `` Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100B)
$164.85

Deluxe Tractor Umbrella - Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or Blue. State color desired in comments section of order form when ordering. (Part No: TU56-X)
$155.22

HAND CLEANER GALLON - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218)
$28.72

Oil System
Lucas Heavy Duty Oil Stabilizer (quart) - A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries. Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001)
$15.12

PTO / Driveline
Driveline Assembly - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333 mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit is 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1333 mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138)
$176.82

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Part No: AB4111WY)
$187.82

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111K33)
$288.01

Overrun Coupler with Quick Release - This Overrun Coupler features a Quick Release. It fits applications needing a male and female end of 6 splines and 1 3/8 inches. (Part No: S.23639)
$45.17

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$235.29

Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250)
$25.68

Acrylic Hardener, 16oz - This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12P)
$42.20

Acrylic Hardener, 8oz - This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12HP)
$22.04

Aluminum High Heat Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP402HHSP_)
$49.02

Black Hi-Heat Spray Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP411HHSP_)
$49.02

Paint, Allis Orange, 1 Quart - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP280QT)
$17.55

Paint, Allis Orange, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP280SP)
$44.19

Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312GAL)
$44.00

Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312QT)
$17.55

Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312SP)
$44.19

Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447GAL)
$58.92

Paint, Clear Coat, 1 Quart - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447QT)
$21.99

Paint, Clear Coat, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447SP)
$44.19

Paint, Gray Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700GAL)
$44.00

Paint, Gray Primer, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700QT)
$17.55

Paint, Gray Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700SP)
$44.19

Paint, Red Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP3987GAL)
$44.00

Paint, Red Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP3987SP)
$44.19

Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225GAL)
$44.00

Paint, Satin Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225QT)
$17.55

Paint, Satin Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225SP)
$44.19

Paint, Yellow Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2720GAL)
$44.00

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)
$68.39

Slip Resistant Coating - Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT)
$28.23

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. (Part No: BL116KIT)
$99.22

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. A little goes a long way! (Part No: E844Q)
$22.47

Seats
Pan Seat, Universal - 17 inch wide Gold zinc plated, 3-1/2 inch center to center on mounting holes, 1/2 inch by 1/2 inch center square. (Part No: B1865)
$51.54

Seat Belt - Generic Seat Belt Assembly. Ensure this type will work on your tractor before ordering. Retractable belts are also available. (Part No: SBKT)
$23.49

Seat Belt - Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22)
$40.85

Seat Belt, Universal - Seat belt, universal 2-point static adjustable belt. Fits TS1110 seats. (Part No: TS1110BELT)
$17.79

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt –up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt –up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056)
$1437.23

Seat, Air Suspension, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1518.86

Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18 inches wide, 19 inches high, 21 inches deep. (Mounting holes 9 inches wide x 9-3/4 inches deep). Fits several Commercial Turf/Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY)
$102.91

Seat, Universal - **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. Add $15.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1040ATSP)
$82.25

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. Additional $30 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1050ATSP)
$89.37

Seat, Universal - BLUE Universal application leatherette suspension seat. For most compact, agricultural and industrial tractors. Adjustable base for 5 different mounting angles, internal suspension weight adjustment, special slotted base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, adjustable slide track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Add $15 additional shipping per seat due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Color is BLUE. (Part No: TS1060ATSP)
$89.37

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP)
$89.37

Seat, Universal - Seat assembly, black leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before purchasing. Weight 33 pounds. (Part No: TS1110BK)
$111.23

Seat, Universal - Seat assembly, blue leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110BL)
$113.74

Seat, Universal - Seat assembly, yellow leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110YL)
$110.68

Tie-On Seat Cover - Orange and White, 21 inches wide. Deluxe with 2 inches of foam. (Part No: R1012)
$44.66

Universal Seat - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15 inches wide, 17 inches long, 19 inches high to the back of the seat. (Part No: TS1015)
$182.49

Universal Seat - Universal Vinyl seat has Multiple mounting holes, ranging from 4 inch to 11 inch center to center (front to back) and 6-1/2 to 13 inch center to center (side to side). Customer needs to verify it will work for their tractor. An adapter plate may need to be made for some models. Slide track for forward/rear adjustment. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. (Part No: TS1100)
$117.53

Sheet Metal / Body Parts
2 Hour DVD - The How To of Sheetmetal Repair - This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD)
$25.68

Battery Hold Down Bolt - These J-Bolts are 10 3/4 inches long with 5/16 inch 18 UNC thread. There is 2 inches of thread. Verify measurements before ordering. Replaces original part numbers 198185A1, 393161R1. (Part No: 198185A1)
$3.75

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140)
$31.59

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Part No: RPD112K)
$146.93

SAFETY STEP KIT - Traction Where you need it. Great for use on tractor and combine steps, trailers, grain bin ladders and more. Kit includes 1 pint safety base and safety grit. (Part No: SSK14011)
$53.12

Toolbox, Universal - Universal Toolbox Approx. 16 1/4 Inches X 4 3/4 Inches X 5 Inches. This is a Universal Part and Color varies depending on availability. (Part No: R2685)
$33.29

Steering
Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Part No: S03-1003)
$384.33

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Part No: AE33538A)
$10.32

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Part No: ABC1417)
$37.95

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Part No: R3275)
$7.26

Steering Wheel Spinner, Black - Comes with mounting hardware. (Part No: R3276)
$7.26

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Part No: R3279)
$7.20

Steering Wheel Spinner, Green - Comes with mounting hardware. (Part No: R3278)
$7.20

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Part No: R6323)
$7.79

Steering Wheel Spinner, Red - Comes with mounting hardware. (Part No: R3277)
$8.75

Tools
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891)
$15.23

Chain Binder - 1/4 inch chain binder, 2600 pound load limit. (Part No: LL104)
$36.73

Chain Binder - 3/8 inch chain binder, 5400 pound load limit. Use with either 5/16 inch or 3/8 inch chain. (Part No: LL105)
$42.63

Chain Binder - 1/2 inch chain binder, 9200 pound load limit. Use with either 3/8 inch or 1/2 inch chain. (Part No: LL106)
$79.85

Combination Wrench Set - This wrench set is 22 pieces and comes with both SAE and Metric measurements. Each wrench is made of polished chrome vanadium steel. They come with a durable plastic rack for handy storage and a LIFE TIME UNLIMITED WARRANTY. The Metric measurements are from: 9 to 19 mm and the SAE measurements are from: 1/4 to 7/8 inch. (Part No: W1069)
$24.76

Combination Wrench Set - This combination wrench set is 11 pieces. Each wrench is made of chrome vanadium steel. This set comes in a handy storage rack and includes a LIFETIME UNCONDITIONAL WARRANTY. The SAE sizes range from 1/4 to 7/8 inch. (Part No: W1061)
$12.60

Compression Tester - This tester checks the cylinder compression up to 300 PSI. It fits 14mm and 18mm spark plug threads and is equipped with an air-hold valve, gauge reset button, 11 inch flexible rubber hose, and a complete list of instructions. (Part No: W80579)
$24.36

Cotter Pin Assortment, Small - 560 piece assortment of 1/16 inch x 1 inch, 3/32 inch x 1 inch, 3/32 inch x 1-1/2 inches, 1/8 inch x 1-1/4 inches, 1/8 inch x 2 inches, 5/32 inch x 2-1/2 inches. All in convenient re-sealable plastic case. (Part No: W5205)
$6.80

Cotter Pin Kit - This pin assortment contains 150 pieces, all in a convenient re-sealable plastic case. It includes sizes of: 1/8 inch x 2 inches, 5/32 inch x 2 1/2 inches, 3/16 inch x 3 inches, 1/4 inch x 2 inches, 1/4 inch x 3 inches, 5/16 inch x 2 1/2 inches. (Part No: W5206)
$9.93

Diesel Compression Test Kit - This diesel compression kit includes 9 adapters for popular Domestic, Asian, and European vehicles and comes in a protective case. With this kit you can test your compression through the glow plug or the injector holes. The Gauge reads from 0 to 1000 PSI (0-700kPA) and is rated at +/-2 for accuracy. It will fit the following thread sizes: 24 inches x 2 inches, 12 inches x 1 1/4 inches, 10 inches x 1 1/4 inches and 10 inches x 1 inch. (Part No: W89731)
$52.86

Digital Calipers, Stainless - High quality hardened stainless steel digital caliper. Calculates measurements up to 6 inhces with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6)
$29.21

GREASE GUN - GREASE GUN. Pistol handle grease gun uses standard 11 inch grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121)
$29.17

GREASE GUN - Spring fed 11 inch barrel grease gun. Uses standard 11 inch grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080)
$20.66

GREASE GUN - HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142)
$36.00

GREASE GUN CLAMP - Clamp holds all 2-1/4 inch diameter barrel hand guns. Bolts or screws anywhere through hole in bracket base. (Part No: GC102)
$11.21

GREASE GUN POWERLUBER 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)
$134.19

GREASE GUN POWERLUBER 14.4V with CASE 1 BAT - Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)
$288.95

GREASE GUN POWERLUBER 14.4V with CASE 2 BAT - Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)
$403.25

GREASE HOSE 12 INCH - 12 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: G115)
$11.62

GREASE HOSE 18 INCH - 18 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: G118)
$10.59

Hair Pin Assortment - This hair pin assortment contains 150 pieces. It includes 6 different sizes from: 3/32 x 1 3/16 inches to 5/32 x 2 15/16 inches. All in a convenient re-sealable plastic case. (Part No: W5210)
$6.57

Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: S.58474)
$267.39

Hose Clamps Assortment - This hose clamp assortment contains 26 pieces, all in a convenient re-sealable plastic case. It includes sizes of: 5/8 inch, 7/8 inch, 1 inch, 1 1/16 inches, 1 1/4 inches and 1 1/2 inches. (Part No: W5348)
$6.36

MULTI TESTER - Compact size meter for testing volts (up to 500 Volts), OHMS and AMPS. Includes color coded test probes and instruction booklet. Uses AA batteries, not included. (Part No: ETA66420)
$18.86

O-Ring Assortment - Neoprene o-rings from sizes 1/8 x 1/4 to 3/4 x 1 inch. Total of 225 pieces in 11 sizes. (Part No: B1SB12)
$24.30

O-Ring Assortment - This O-ring assortment contains 407 pieces in 32 different sizes, all in a convenient re-sealable plastic case. Each O-ring is made of a high quality nitrile butadiene rubber and range in size from 1/4 inch outside diameter to 2 1/4 inches outside diameter. (Part No: W5202)
$12.95

Rotary Tool Kit - This 80 piece rotary tool kit includes: a hand held rotary tool that turns at 1600 rpm, cut off wheel mandrel, polishing cloth wheels, mandrel for polishing cloths, carbide burr, collets, sanding drums and sleeves, buffing wheels, dressing stone, and drill bits. This kit is great cutting, grinding, polishing, sharpening, and drilling. (Part No: W50083)
$13.49

Screwdriver Set - This screwdriver set is 30 pieces. It contains 7 screwdrivers that range in size from 1/4 to 6 inches, a magnetic bit driver, 6 precision screwdrivers, and 14 power bits, all contained in a plastic rack. (Part No: W1718)
$18.54

Spring Assortment - This spring assortment contains 200 pieces. It includes compression type sizes from: 9/32 inch x 1/2 inch to 7/32 inch x 1 1/2 inches and extension type sizes from: 13/64 inch x 13/16 inch to 11/32 inch x 1 7/16 inches. (Part No: W5200)
$6.35

T-Handle Hex Key Set - This T-Handle hex key set is 10 pieces (SAE). Each key is made of a high quality carbon steel with a black oxide finish that resists corrosion. The PVC T-Handle grips are added for better torque and comfort. This set also comes with a mountable hand storage rack. The sizes are: 3/32 inch, 7/64 inch, 1/8 inch, 9/64 inch, 5/32 inch, 3/16 inch, 7/32 inch, 1/4 inch, 5/16 inch and 3/8 inch. (Part No: W80274)
$14.90

Valve Spring Tool - Universal valve spring tool compresses springs without needing to remove the cylinder head. For most overhead valve engines. It's adjustable cam handle keeps the tool correctly adjusted for the entire job. It comes with a complete list of instructions. (Part No: W80567)
$23.43

WIRE STRIPPER 4-WAY - 4-way wire stripper/crimper tool, cuts wire 10 gauge and lighter. Strips wire 10-22 gauge, crimps solderless terminals. (Part No: ETA66223)
$7.51

Winch Remote, Wireless - Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003)
$22.48

Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0002)
$110.33

Winch Set, 2500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0004)
$110.33

Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0001)
$124.13

Winch Set, 3500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0005)
$124.13

Wire Terminal Assortment - This wire terminal assortment is 160 pieces and contains 19 of the most popular sizes and types of wire terminals. This kit comes in a convenient re-sealable plastic case. (Part No: W5213)
$13.13

Woodruff Key Assortment - This key assortment contains 80 pieces. All in a convenient re-sealable plastic case. It includes 10 of each of the following sizes: 3 x 5 x 13 MM, 3 x 6.5 x 16 MM, 4 x 5 x 13 MM, 4 x 6.5 x 16 MM, 4 x 7.5 x 19 MM, 5 x 7.5 x 19 MM, 5 x 9 x 22 MM, and 6 x 9 x 22 MM. (Part No: W5341)
$8.88

Tractor Manual Search - Yesterday's Tractor Co.

Wheels
Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Part No: FW55166)
$61.84

Power Adjust Rim - 11 inch x 28 inch, 4-rail type. For double ramp clamp. Holes in rail for stop body screw are drilled parallel to axle (not at angle). Use with stop body C0NN1057A, stop body screw C0NN1058A, clamp E5NN1043AA. Fits tire size 12.4 inches x 28 inches, 13.6 inches x 28 inches. Additional $25.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces: 220011, 70220011. (Part No: C5NN1050H)
$405.80

Rear Rim Carriage Head Bolt and Nut - 2.5 length, 5/8 diameter FF Carriage Head Bolt with nut. PRICED EACH. (Part No: HB250)
$3.75

Stop Body - Fits various tractors models with power adjust rims. Replaces part numbers: 219456 and 70219456. (Part No: C0NN1057A)
$14.67

TIRE GAUGE - Gauge has special oiling and pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350)
$11.79

TIRE GAUGE DIAL - Precision Bourdon Tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG)
$13.07

Tire Bead Buster - Handy for breaking the bead when removing tires. No electricity, pneumatics or hydraulics needed. (Part No: S.29300)
$429.75

Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Brass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599)
$40.14

Tire Inner Tube - This Tire Inner Tube is used with 4.00 x 12, 4.50 x 12 and 4.80 x 12 tires. Has a TR-13 valve stem. Valve height 1.38 inch, diameter 0.46 inch. (Part No: 400X12TB)
$17.25

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Part No: 500X15TB)
$16.50

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. A little goes a long way! (Part No: E844Q)
$22.47

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Part No: WHS050)
$16.13

Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 7.5 x 24, 8.3 x 24, and 9.5 x 24. (Part No: WHS060)
$41.39

Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Part No: WHS059)
$51.89

Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Part No: WHS058)
$43.47

Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Part No: WHS061)
$53.89

Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Part No: WHS062)
$48.74

Tire Tube 34 and 36 Inch - This tire tube is used for all tractors with the following tires: 10.00 x 34, 11.00 x 34, 11.2 x 34, 12.00 x 34, 12.4 x 34, 10.00 x 36, 11.00 x 36, 11.2 x 36, and 12.4 x 36. (Part No: WHS063)
$54.80

Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for radial tires. (Part No: WHS064)
$53.48

Tire Valve Fluid Adapter - For ballast. (Part No: S.61167)
$20.92

Tire and Tube - This 4.00 inch x 12 inch 3 rib tire comes with a tube and fit various tractor models. (Part No: 400x12-3)
$55.57

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 550X16)
$50.99

Tire, Three Rib - This is a Triple Rib, 4 ply 4.50 X 12 triple. This tire is not designed for tubeless use. Uses 400X12TB tube, sold separately. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 450X12)
$44.65

Tire, Three Rib - Front Tire, 3 Rib, 6.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 650X16)
$77.43

Tire, Three Rib - Front Tire, 3 Rib, 6.00 inches x 16 inches. Designed to be used with tube (part number WHS050). 4 Ply. Additional $25 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 600X16)
$63.35

Tire, Three Rib - Front Tire, 3 Rib, 5.00 inches x 15 inches. Designed to be used with tube (part number 500X15TB). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 500X15)
$51.77

CategoriesAll WC Parts
Manuals
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
Allis Chalmers WC Manuals
WC Service Manual 93 Pages (Part No: AC_WC_SV) $24.95

WC I&T Aftermarket Shop Manual (No Wiring Diagram) 96 Pages (Part No: AC-11) $29.95

WC Parts Manual 183 Pages (Part No: AC_WC,WF_PT) $33.95

WC Operators Manual 42 Pages (Part No: AC_WC_OP) $17.95

Miscellaneous Related Items
Tune-up DVD
Allis-Chalmers WD45 - Includes rebuilding the carburetor and distributor, oil and filter change, brake adjustment, troubleshooting and more. Step-by-step instructions, with information pertaining to the Allis-Chalmers WC, WD, WF, WS & WI Tractors (Part No: JDV-00250)
$24.00

Rebuild DVD
Allis Chalmers WD45 - Shows how to completely rebuild the tractor's engine. You'll see the engine disassembled down to the bare block and then rebuilt step-by-step in an easy-to-follow format. For Allis-Chalmers WD45, with information pertaining to the Allis-Chalmers WC, WD, WF, WS & WI Tractors. (Part No: JDV-00150)
$24.00

Hat
Vintage Allis-Chalmers mesh - Solid black hat with mesh back and plastic snap size adjuster featuring the vintage Allis-Chalmers Starburst logo. (Part No: ACVM)
$13.95

New Allis-Chalmers mesh - Solid black hat with mesh back and plastic snap size adjuster featuring the new Allis-Chalmers logo. (Part No: NACM)
$13.95

Vintage Allis-Chalmers flame - 100% cotton hat, black with orange flames and orange piping on the brim. (Part No: VAFL)
$19.95

New Allis-Chalmers flame - 100% cotton, 6 panel hat black with orange flames and new style Allis-Chalmers logo. (Part No: NAFL)
$19.95

Allis Chalmers vintage starburst sandwich brim - Black hat with white accents and sandwich brim with vintage Allis-Chalmers starburst logo. (Part No: ACVSS)
$13.95

Allis Chalmers solid black with sandwich brim - Black hat with white accents and sandwich brim, 65% polyester, 35% cotton. (Part No: ACSBS)
$13.95

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

[Categories]   [All Allis Chalmers Models]   [Print]  







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2018 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy