Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Allis Chalmers D19 Tractor Parts

[ Show Pictures ]

[Categories]   [All Allis Chalmers Models]   [Print]  


Brakes
Brake Band - Sold individually, 4 required per tractor. For tractor models 170, 175, 180, 185, 190, 190XT, 190XT III, (200 serial number less than 4000), (D17 serial number 42001 and above), D19, D21. Also replaces 70276940, 70235610, 70277438. (Part No: 70277379)
$36.00

Brake Drum - Also replaces 70235603. For tractor models 880 Cotton Picker, D19, 190 serial number before 21700, 190XT before serial number 21700. (Part No: 70277329)
$142.96

Brake Lining - Lining kit for disc brakes. Includes lining and rivets for one disc and one drum. Prior to serial number 21699. For 190, 190XT, D19, F, F2, L. 70252562, 70277200. (Part No: 70235628)
$33.75

Brake Shoe Linings with Rivets - Set of 2 brake shoe linings with rivets for one wheel. For 170, 180, 185, 190, D17 after serial number 42000, D19, D21. (Part No: BLKAD17)
$25.88

Brake Shoe Spring - Diameter of wire is 0.088 of an inch, outside diameter is 0.525-0.666 of an inch, and has an overall length of 1.389 inches. 4 used per tractor, sold individually. For the following models: D17(serial number 42001 and up), D19, D21, 170, 175, 180, 185, 190, 190XT, 200(up to serial number 4000). Replaces 235609, 250435, and 70250435. (Part No: G48508)
$6.12

Front Brake Spring - Fits tractor models D17 (up to serial number 42000), D19 (also used as a hydraulic oil control spring on D19 up to serial number 12850.), WD, WD45; Replaces: 70232564, 70222500, 232564, 222500. 3.1354 inch overall length, .595 inch outside diameter, .081 inch wire diameter. Two used per tractor. Sold individually. (Part No: 70232564)
$14.39

Clutch
Clutch Disc - This Remanufactured 11 inch diameter, woven, 1-1/4 inch hub, 10 spline. For tractor models D17, D19, 170, 175. (Part No: 70241255)
$184.96

Clutch Inspection Plate - Fits B, C, CA, IB, D10, D12, D17, D19, WC, WF, 160, 170, 175. (Part No: 208465)
$14.25

Pilot Bearing - Clutch pilot bearing. For tractor models 170, 180, 190, D17, D19, D21, WD45. (Part No: 70527813)
$32.12

Power Director Clutch Plate - Used on Allis Chalmers D15, D17, D19, D21, 170, 175 below serial number 5461, 180 below serial number 12800, 185 below serial number 12800, 190, 190XT, 190XT Series III, 200, and 7000. Replaces OEM numbers 70257672, 70261212 (Part No: 70261212)
$56.83

Pressure Plate, 11 inch without Hub - For tractor models 170, 175, D19. (Part No: 70241253)
$210.45

Release bearing - For tractor models 180, 185, 190, 190XT, 200, C, CA, D10 (serial number 3501 and below), D12 (serial number 3001 and below), D14, D15, D17 (serial number 75000 and below), D19, H3 (with 149 engine). Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces: 211273, 235079, 70211273, 70235079. (Part No: N1087)
$20.33

Release Bearing - For tractors: B, IB, WC, WF, WD, WD45, WD45D, D10 (serial number 3501 and up), D12 (serial number 3001 and up), D17 (prior to serial number 75000), D19. Measures inside Diameter 2.062 inches and Outside Diameter 3.375 inches.Replaces 70204829 (Part No: 361292R91)
$28.56

Cooling System
Belt - This Fan Belt measures 1/2 inch wide and 48 5/8 inches long. For Diesel models 170, A, A2, C, D19, WD45. Verify measurements before ordering. (Part No: 378113R2)
$7.80

Fan Blade - Fan Blade For WC, WD, WD45, D17, D19. Four Blade. (0566R) (Part No: 70235753)
$23.40

Fan Blade, 5 Blade - 17-1/2 inch diameter, 1-1/16 inch pilot hole, mounting holes on 1-1/4 inch centers. For tractor models (170, 175 gas), (D17, D19, WD45 gas or diesel), WC, WF. (Part No: 70240973)
$97.68

Radiator Cap, Pressurized - This 4 pound pressurized cap is for tractor models using a pressurized cap: Late B, C, CA, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 70228545, 70228722, 70228817, 70254891. (Part No: 70254891)
$6.75

Radiator Hose, Lower - A = 1.562 inches, B = 1.812 inches. For model D19 diesel. (Part No: 70236836)
$23.12

Radiator Hose, Upper - Our new upper radiator hose has an inside diameter of 1.750 inches. For tractor models (D17 diesel serial number 38964 and up), (D19 diesel with 4-15/16 inch filler neck). (Part No: 70235361)
$21.74

Radiator Hose, Upper - Our new upper radiator hose has an inside diameter of 1.750 inches. For model D19 with gas engine. (Part No: 70236594)
$13.96

Thermostat - For tractor models 180, 185, 190, 190XT, 190XT III, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 860, 880, (D17 serial number 119938 and up), (D19 diesel), D21. Replaces 74025103. (Part No: EAF8575BWG)
$9.14

Water Pump - Water Pump less Hub and Pulley. Fits water pumps with casting number L126627. Casting number for gas 134445) For models A Combine, D19 (diesel and late gas). Replaces 134445, 74512213, 74516962, 74517363 (Part No: 74517363)
$130.44

Water Pump - 4.938 inch filler neck. For tractor models (D17 series III diesel), (D19 gas and LP). Replaces 4516959, 74516959, 74517362, 134680, 7451729 (Part No: 74517362)
$125.21

Water Pump Pulley - This pulley is for tractor models (D17 series III with diesel engine), D19. (Part No: 74513381)
$49.80

Decals and Emblems
Decal Set, Vinyl Cut - Decal Set for Allis Chalmers Model D19. (Part No: R1873)
$471.82

Decal Set - Vinyl Cut, Complete - Vinyl Cut, Complete. For Model: D19D (Diesel Engine) (Part No: R2432V)
$405.33

Drive Train
Control Lever Knob - Three knobs used per tractor. Fits D10, D12, D14, D15, D17, D19. Also Replaces 70228215. (Part No: 228215)
$5.09

Gear Shift Boot - For tractor models D17, D19, 170, 175, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Part No: 233767)
$9.02

Gear Shift Knob - This Gear Shift Knob has a 0.400 inch inside diameter hole. Fits B, C, WD, WD45, D10, D12, D14, D15, D17, D19, D21. Replaces: 226023, 70226023 (Part No: 226023)
$6.15

Input Shaft - This Input Shaft is for tractor models D17, D19, 170, 175. Transmission Input Shaft is 21 - 20 - 8 Tooth. 9.92 inches in total length. (Part No: 70239530)
$217.05

Third and Fourth Gear Coupling - For D17, D19, 170, 175, (WD, WD45 both serial number 127007 and up). Third and Fourth Gear Coupling (Part No: 70232452)
$122.77

Third Gear - For tractor models D17 serial number 24001 to 71326, D19 up to serial number 15151, 170, 175. Third Gear has 27/8 Teeth. VERIFY TOOTH COUNT. (Part No: 70240940)
$288.62

Electrical System
Distributor Cap - Distributor cap. For D19. Also fits (Combines A, C, CII, F With Delco 1112461, 1112601, 1112655), (Industrials TL14, TL14A) (Cotton Pickers 622, 801, 802) Replaces: 4042704, 9001153, 74042704, 79001153, 812627, 824735, 825409, 1867722, 1889361, 1911597, 12338674, D301, D301A, D320 (Part No: 21A443)
$10.62

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models B, IB, C, G, CA, WD, WD45, WC, WF, D10, D12, D14, D15, D17, D19, RC. Replaces 225734 & 70225734. (Part No: 1900119)
$8.03

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits tractor models B, C, IB, RC, WC, WD, WF, CA, D10, D12, D14, D17, D19, G, WD45, D15, H3, I40, I400, I500, I60, I600. With 1112461, 1112601, 1112655 1111411 or 1112607 Delco Distributor and Clip Held Cap. Replaces: bushing: 225773, 70225773, 0.005 inch shim washer: 225797, 70225797, 0.034 inch washer: 250977, 70250977, 0.010 inch shim washer: 4050123, 74050123. (Part No: ABC3007)
$28.49

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Allis Chalmers with Delco 1112461, 1112601, 1112655, 1111411, 1112607, 1112609. Replaces: 225791, 225792, 225793, 225794, 225795, 70225791, 70225792, 70225793, 70225794, 70225795 (Part No: 1904376)
$16.88

Electronic Ignition Conversion Kit, 12 volt negative ground - 12 VOLT NEGATIVE Ground. For Tractor Model D19. For the following Delco Distributors: 1111702, 1111750, 1112579, 1111731, 1112561, 1112588, 1112587, 1112603, 1112632, 1112615. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. Use on 12 VOLT NEGATIVE ground system. (Part No: 1168LS)
$113.74

Electronic Ignition Conversion Kit, 12 Volt Negative Ground - Replaces points & condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower, improve fule economy. For 12 Volt Negative Ground systems only. For Delco 1112624, 1112466, 1112682, 1112687. Tractor models D19, 180, 185, 190 and 190XT. (Part No: 1163A)
$90.72

Fuse Holder - Mounts on 5/8 inch diameter hole. 2 spade connectors. Replaces 230246, 70230246 (Part No: 376852R91)
$6.83

Generator, 12 Volt - Pulley not included. For tractor models D10, D12, D14, D15, D17, D19 all from 1959-1965. Replaces 1100305. Refundable $25 core charge will be added to your order after processing and will not show on your order confirmation. (Part No: 1100332)
$236.64

Generator, Delco Type, 12 Volt - For tractor models D, D10, D12, D14, D15, D17, D19, DD, H3, HD3, RT40. Replaces Delco part number 1100305. Remanufactured. Refundable $25.00 core charge will be added to your order. (Part No: TG-59)
$249.34

Ignition Kit, Delco Clip-Held Cap Distributor - Ignition kit for a Delco distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. For: A, B, CA, G, WD, WD45, D10, D12, D14, D15, D17, D19, C, E, F, 60, 66, 72, 90, WF, I40, I400, I500, I60, I600, H3. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1112593, 1111708. (Part No: ATK1DCR)
$8.48

Key Switch - 5 terminal, with keys and jam nut. For tractor models D10, D12, (D14 from serial number 9500 and up), (D15 up to serial number 9000), (D17 up to serial number 75000), D19, D21. Replaces 235785, 231705, 233320, 229201, 234356 70235785, 70231705, 70233320, 70229201, 70234356. (Part No: 230163)
$39.75

Rotor - Used with Delco distributors 1111411 1112607, and 1112609 with a clip held cap. For tractor models: B, IB, C, CA, G, D10, D12, D14, D15, D17, D19, H3, RC, WC, WD, WD45, I400, WF, I500, I600. Replaces 1921285, 225736, and 70225736. (Part No: 1750498M1)
$2.78

Solenoid, 12 Volt - This is a 3 Post 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. For tractor models D10, D12, D14, D15, (D17, D19, 170, 180 with 1107695 starter) D21 all with gas engines and Delco starters. Replaces Delco DR1467, OEM 237136, 233296, 70237136, 910687. May come in a silver metal casing versus black plastic. (Part No: DR1467)
$12.15

Starter Drive - Remanufactured Starter Drive - (THIS IS NOT COMPLETE STARTER, JUST DRIVE GEAR ASSEMBLY) D17, D19 (models 1959 & later using 1107235 or 1107695) (Part No: 70231310)
$58.65

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch, number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch and manifold heater switch. Replaces: 227029, 240962, 242988, 245866, 245936, 253322, 70253322, 71191589, 72160068. (Part No: R7994)
$11.25

Voltage Regulator - 12-volt, using Delco generator 1100305 (VR1817). Also gas or diesel using Delco generators 1100345, 1100426. For D10, D12, D14, D15, D17, D19. The Three Post side of this regulator may be parallel or slightly splayed. Replaces Allis Chalmers Numbers; 229484, 236680, 70229484, 70236680 Delco Numbers; 1118381, 1118779, 1118977, 1118981, 1118987, 1118993, 1118997, 1118999, 1119191, 1119576 (Part No: 182548M92)
$31.32

Voltage Regulator, 12 Volt - For model D19 with gas engine SN# up to 14698. (Part No: 220484)
$40.33

Wiring Harness Kit - This is a complete Wiring Harness Kit for Allis Chalmers; D17 diesel serial number 75001 and up, and D19 Diesel. This is an original style harness. (Part No: R6431)
$281.52

Engine Bearings
Main Bearing Set - For diesels WD45, D17, D19 with 6BD23 & DA262 6-cylinder engines. Available in standard, .010 or .020. Specify size when ordering. (Part No: MBK-D17D7)
$161.50

Rod Bearing Set, .002 - Connecting rod bearing set. .002 inch, For tractor models CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder engine. (Part No: CRK-D17D6-002)
$91.99

Rod Bearing Set, .010 - Connecting rod bearing set. .010 inch. For tractor models CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder engine. (Part No: CRK-D17D6-010)
$93.44

Rod Bearing Set, .020 - Connecting rod bearing set. .020 inch. For tractors: CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder engine. (Part No: CRK-D17D6-020)
$93.44

Rod Bearing Set, Standard - Standard, connecting rod bearing set. For tractor models CA, WD45D, D17D, D19D with 6BD23 or DA262 6 cylinder engine. (Part No: CRK-D17D6)
$93.44

Engine Gaskets
Full Gasket Set - With Press-on Oil Seal Retainer. For D19 with 262 Gas Engine. (Part No: FS3300VC)
$292.15

Head Gasket Set - For model D19 with 262 Gas Engine. (Part No: HS3300VC)
$122.13

Engine Parts
Connecting Rod - For tractor models (D19 gas or diesel), (WD45, D17 diesel) all with casting number 4500141. (Part No: R1201490)
$210.60

Engine Pistons and Sleeves
Piston Pin Bushing - For tractor models D15D, D17D, D19 used in 175 and 262 cid diesel engines. Priced Each. If you order 1, you will receive 1 bushing. (Part No: 74507127)
$12.26

Exhaust System
Exhaust Elbow, Turbo - For model D19, D21, 210, 220, 7000, 7010, 7020 (Part No: 70253661)
$85.56

Exhaust Manifold Gasket Set - For gas model: D19 (Part No: R4013G)
$19.95

Manifold - For gas model: D19. Gaskets NOT included. Gasket available as part number R4013G. (Part No: 74516769)
$251.16

Manifold - For D19 Gas. Manifold, Intake & Exhaust. Gasket Available as Part #4013G. Replaces 4512715, 4513468, 4516769, 74513468, 74516769 (Part No: R4013)
$280.83

Manifold Pipe - Can be used with the following manifolds 362437R21, 161158A, 161818A, 761615M91, 4512715, R0947, L415. For model D19. (Part No: R0055P)
$12.75

Muffler - Muffler, gas. For D19 (Part No: 79015993V)
$57.73

Muffler - Vertical Exhaust Inlet inside diameter 2 3/8 inch, outlet outside diameter 2 inch, overall length 27 inches. For D19 Gas. OEM number 70246130, use MC212 clamp, use R1800 rain cap. (Part No: R1563)
$59.05

Fuel System / Air Intake
Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Allis Chalmers it is used on Industrial: 60 (For choke cable bracket with Marvel Schebler carb # TSX591, TSX783, TSX815, TSX848, TSX853, TSX869, TSX871, TSX928), D15 (For choke cable bracket; SN: 9001 and up; with Marvel Schebler carburetor), D17 (For choke cable bracket; SN: 42001 and up; with Marvel Schebler carburetor), [ D19, 170, 175 (For choke cable bracket with Marvel Schebler carburetor) ], [ 7000, 7010, 7020, 7045, 7060, 7080, 7580 (For diesel fuel shut off cable brackets) ], [ Industrial: 500, 510, 512, 600, 612, 614, 621 (For choke cable bracket with Marvel Schebler carb number TSX591, TSX783, TSX815, TSX848, TSX853, TSX869, TSX871, TSX928) ]; Replaces: 70237169, 74047137, 29-81, B110-10 (Part No: CT29-81)
$4.99

Carburetor Kit, Basic - Kit for Marvel TSX863 or TSX848 carbs used on D10, D12, D15, D17, D19, D21. (Part No: MS103)
$16.80

Carburetor, New - With reversible linkage. This Zenith Carburetor outperforms the original carburetors used on: D19. Replaces Marvel-Schebler numbers TSX394, TSX777, TSX848, TSX268, TSXU839, TSXU995. Center to center on the 2 mounting bolts is 2 11/16 inches. Made in USA. 1 year warranty. (Part No: 14997)
$462.30

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX848. For the following tractor models: D19. Add $50.00 core charge to price (will be added after order is placed when ordering online) - you will receive instructions for returning your core for a refund if you have one available. (Part No: 1130-CARB)
$157.70

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Part No: 2N9166)
$2.28

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor.Used on Allis Chalmers B, C, CA, D10, D12, D14, (D15 Gas To Serial Number 9001), (D17 Gas to serial Number 42000), (D19 Gas To serial Number 12000), G, I40, I400, I60, I600, 170, 175, 180, IB, RC, WC, WD, WD45, WF. Replaces original part numbers 208362, 70208362. Gasket may be rubber or cork, depending on availability. (Part No: 2NAA916061)
$1.71

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces 70237945 and 237945. Will fit the following models: B, IB, C, CA, G, D10, D12, D14 , D15(Gas To Sn#9001), D17(Gas to Sn#42000), D19 (Gas To Sn#12000), RC, WC, WD, WD45, I400, WF, I600 (Gas), 170 (Gas), 175 (Gas), 180 (Gas). (Part No: 9N9162)
$3.44

Fuel Tank Cap - For Tractor Models B, C, CA, G, IB, RC, WD, D10, D12, D14, D15, D17, D19, I40, I400, I60, WC, WF, WD45, 170, 175, 180, 185, Backhoe: I600. Replaces: 253690, 70253690. This is a Non-Vented Cap. 7/8 inch outside diameter, 2 11/16 inch inside diameter, 1/4 inch high. Zinc Finish. 1.850 inches edge of tang to edge of tang. (Part No: D5NN9030A)
$5.81

Needle Valve - Viton Float Valve Needle, Seat and Gasket Assembly for some Marvel Schebler carburetors. For the following models: D15(serial number 9001 and up), D17, D19, H3(serial number 6960 and up), WD45, I600, 170, 175. Replaces 226458, 233-543, and 70226458. (Part No: C3NN9D532A)
$5.12

Sediment Bowl Assembly - Large bowl, single inlet type. Used on; (D15 Gas serial number 9001 and up and All Diesel using 2.315 Long Glass Bowl), (D17 Gas serial number 42001 and up and all Diesel using 2.315 Long Glass Bowl), (D19 Gas serial number 12001 and up and all Diesel using 2.315 Long Glass Bowl), (D21, WD45, 170, 175, 180, 185 all 2.315 Long Glass Bowl), (U Gas only using 2.315 Long Glass Bowl and single outlet ), (UC Gas only using 2.315 Long Glass Bowl and single outlet), (190, 190XT Gas, Diesel. Using 2.315 Long Glass Bowl). Fittings are 3/8 inch pipe inlet, 1/8 inch pipe outlet, 2.315 inch tall glass bowl. Replacement bowl available as part S.65504. Replaces: 237946 and 70237946. (Part No: S.61581)
$18.23

Sediment Bowl Assembly - Sediment bowl. Fits Model B, C, CA, R, D14, D17, D19. Replaces 70237944. Might look slightly different than picture. (Part No: 910513)
$18.81

Sediment Bowl Assembly - Small Bowl, 2 outlet type. A 1/8 Inch Pipe Plug will be needed if only one outlet is used. For Models: D10, D12, WC, WD, WD45, D15D, D17, D19, D21, 180, 170 diesel. (Part No: 70239167)
$20.70

Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: D15 Gas (SN: 9001 & up), and all diesel, D17 Gas (SN: 42001 & up) and all diesel, D19 Gas (SN: 12001 & up) and all diesel, D21, U, UC, WD45, 170, 175, 180, 185, 190, 190XT. Replaces 70237947V, 237947. (Part No: S.65504)
$5.43

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 208325, 208363, 70208325, 70208363 (Part No: 49923D)
$3.12

Gauges
Ammeter - Ammeter for tractor models 170, 190, D10, D12, D14, D15, D17, D19, D21. (Part No: 70254407)
$13.50

Amp Gauge - This amp gauge has the "Allis-Chalmers" logo printed on the face. It fits the following tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, 160, 170, 175, 180, 190, 190XT, 200, 210, 220. It is meant to be used on systems that have been converted to 12 volts. It has a white face, chrome bezel, and it reads 60-0-60. (Part No: ACS1833)
$36.75

Dash Light with 12V Bulb - Used on the following Allis Chamlers modles: D10, D12, D14, D15, D17, D19, D21, I40, I400, I60, I600, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, this Dash Light replaces OEM part numbers 229203, 230247, 234404, 70229203, 70230247, 70234404. This part has a 0.658 inch socket diameter, 1 inch center to center on mounting holes and a Chrome finish. (Part No: 70234404)
$38.96

Dash Warning Light - Know when you oil pressure is low with this Dash Warning Light. This is a 12 - volt light with red dome. It is 2.191 inches over all length, with 0.675 inch outside diameter threads. 2 Spade Terminals. Used on Allis Chalmers D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces part numbers 240837, 240838, 240869, 276390, 70240837, 70240838, 70240869, 70276390 (Part No: 240837)
$28.79

Instrument Panel Trim - New and Improved ~ 1/2 inch swirl, machine turned design on stainless steel. For tractor models (D15 serial number 9001 and up), (D17 serial number 32001 to 75000), D19. Replaces 234433, 70234433. (Part No: 234433)
$72.04

Proofmeter Cable - This Proofmeter Cable is 56-3/4 inches long. It is used on Allis-Chalmers D19 gas. Replaces original part numbers 237076, 261605, 70237076, 70261605. (Part No: E8NN17365AA)
$26.69

Tachometer - For model D19. Replaces 236655. (Part No: 70236655)
$160.77

Traction Booster Gauge, Fully Functioning - WORKING booster gauge. For tractor models CA, WD, WD45, (D10 up to serial number 9199), (D12 up to serial number 9167), D14, (D15 up to serial number 9000), (D17 up to serial number 75000), D19. Replaces 228977, 226631, 70226631, 235598, 70235598, 70228977. (Part No: 70228977)
$96.60

Hitch / Drawbar
Drawbar - 52.25 inches long, 2.50 inches wide, 1.250 inches high with holes at 1.720 inches, 4.331 inches, 5.692 inches, 8.332 inches from front. For tractor models 190, 190XT, 200, 7000, D19. Additional $30 shipping due to weight. This additional charge will be added to your order. (Part No: 70239813)
$228.60

Hydraulic System
Hydraulic Filter - Oil filter element, spin on type. For 180, 185, 190, 190XT, D15, D17, D19, D21 (Part No: 70239930)
$8.80

Lights
Dash Light, Chrome, 12 Volt - For tractor models 170, D10, D12, D14, D15, D17, D19, D21, 175, 180, 185, 190, 190XT, 200, 210, 220, I-40, I-400, I-60, I-600. Replaces 230247, 234404, 70230247, 70234404. (Part No: 229203)
$29.14

Light Visor - This Light Visor is used on Allis Chalmers (D10, D12, D15 all Serial Number 9001 and up), D17 Serial Number 42001 and up, D19. Replaces: 236352, 70236352 (Part No: 534347M1)
$18.75

Sealed Beam Bulb - Red backed, work/tail light, 4-1/2 inch diameter. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5040, 6040, 7030, 7050, D10, D12, D15, D17, D19, D21. (Part No: 70250301)
$20.23

Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 - 12 Volts. (Part No: TLBULB12V)
$1.14

Work Tail Light Assembly - 12 VOLT WOK LIGHT. For AC models: D10, D12, D14, D15, D17, D19, D21, 190, 190XT, 190XT III. (Part No: 70243313)
$100.95

Oil System
Oil Fill Breather Cap, With Clip - 3-1/4 inches tall (says "OIL"). Fits B, C, CA, WD, WD45, D10, D12, D14, D15, 190XT, D17, D19, HD3, 200, 300, 310, 420, 430, 500B, W3, W5, VAC, VAI, VAH, VA, VAO, VAS. Replaces OEM numbers 203196, 205298, 200267. (Part No: R4458)
$41.25

Oil Filter, Spin On - Spin on style oil filter measures with dimensions of 5 13/32 inches in length, 3 11/16 inches O.D. Replaces 237000, 4511629, 70237000, 74511629, C9NN6714A, 1959757C1, 388227R1, 918266R93, 920203C1, A146696, A17415, A33487, A37189, E36534, G45210, G45306, 500462, 86546614, 86546614DS, C1AZ6731A, C3AE6714A, C5NE6737B, D9NN6714EA, E7NN6714A, E7NN6714AA, 1851658, TY9425, TY9425E, 159045A, 83963907, 87800083, 83947505, 89832924. Please verify OEM number before ordering. (Part No: E7NN6714AA)
$6.33

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Uses EBU6734A washer, sold separately. Replaces 205060, 224994, 225585, 225657, 226408, 4026437, 74026437. (Part No: C5NE6730B)
$3.00

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B Oil Drain Plug. (Part No: EBU6734A)
$1.25

Paint
Paint, Cream, 1 Quart - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP270QT)
$20.40

Paint, Persian Orange #2, 1 Gallon - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP285GAL)
$44.00

Paint, Persian Orange #2, 1 Quart - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP285QT)
$17.55

Paint, Persian Orange #2, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP285SP)
$49.60

PTO / Driveline
PTO and Lift Shaft Housing Seal - PTO Outer Seal for 1 speed, 1 3/8 inch output shaft. This oil seal measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide For tractor models B, C, CA, D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 190XT III, 200. Replaces: 224810, 230608, 241779, 70224810, 70230608, 70241779 (Part No: 70241779)
$6.89

Seats
Back Cushion, Wood Backing - This High Quality Back Cushion is on a wood backing. It is not exactly like the original. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces: 236460, 70236460 (Part No: 70236460W)
$52.91

Back Rest Cushion on Steel - This Back Rest Cushion is restoration quality with powder coated steel backing. Cushions are embossed like original. High quality stitching. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces: 236460, 70236460 (Part No: 70236460-OE)
$122.48

Seat Back - Black & White Vinyl on Steel with Original Style Pleated Covering For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Part No: R4357)
$100.36

Seat Back - Black & White Vinyl on Wood For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. (Part No: R0853)
$44.66

Seat Bottom - Black & White Vinyl on Steel with Original Style Pleated Covering For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Part No: R4356)
$138.83

Seat Bottom - Black & White Vinyl on Wood. For tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. (Part No: R0852)
$68.75

Seat Bottom Cushion - This Seat Bottom Cushion Restoration quality with powder coated steel backing. Cushions are embossed like original. High quality stitching. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces 236461, 70236461 (Part No: 70236461-OE)
$157.32

Seat Bottom Cushion, Wood Base - This is a high quality replacement for Allis Chalmers D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). It has a wood base. Not exactly like the original. Replaces 236461, 70236461 (Part No: 70236461W)
$73.89

Seat Cushion Set - This Black & white vinyl two piece cushion set is steel backed. Consists of R4356, R4357 plus the Seat Frame. Original style pleated covering. For tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. Replaces: 236318 (Part No: R4358)
$449.88

Seat Frame - Used with two cushions on Allis Chalmers models: 170, 175, 180, 185, 190, 190XT, 200, 220, 7030, 7050, D10, D12, D14, D15, D17, D19 (Part No: 70243740PAN)
$172.91

Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Part No: 72696R1)
$2.25

Sheet Metal / Body Parts
Fender, LH - For tractor models: D17, D19. Mounting bracket not included. FIT TO TRACTOR BEFORE PAINTING, This fender is primer painted, color may vary, it will need to be sanded & filler primer to fill in any spots from spot welding. This fender is handmade overseas and is somewhat crude. Currently, this is the only fender that we are able to offer for these models. They are not perfect. 15 gauge (.064 thick) ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 70237342, 237342 (Part No: 720192)
$241.50

Fender, RH - For tractor models: D17, D19. Mounting bracket not included. FIT TO TRACTOR BEFORE PAINTING, This fender is primer painted, color may vary, it will need to be sanded & filler primer to fill in any spots from spot welding. This fender is handmade overseas and is somewhat crude. Currently, this is the only fender that we are able to offer for these models. They are not perfect. 15 gauge (.064 thick) ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 720193)
$241.50

Side Panel, LH - Left Hand. For tractor models D17 Gas, D19. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 70232149)
$49.68

Side Panel, RH - Right Hand For D17 Series III & IV Gas, D19. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 70235512)
$43.50

Toolbox - Measures 21-3/8 Inches long, 6-3/16 Inches high, 4 Inches wide. For tractor models D15, D17, D19, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces: 236661, 242323, 249750, 70249750 (Part No: 70249750)
$53.13

Steering
Pivot Pin Assembly - Includes: 70916896 (7/8 inch NF slotted nut) and 70925721 (5/32 inch X 2 inch cotter pin). For tractor models (170, 175 gas with roll shift front axle), (180, 185, 190, 190XT, 200, D19 all with roll shift front axle), (D17 serial number 38136 and up with roll shift front axle). (Part No: 70235154)
$56.14

Power Steering Pump - Belt Driven Pump. For tractor models D19, (D17 gas serial number 42001 and up), (D17 diesel serial number 38964 and up), D17 all series 4). (Part No: 70240066)
$1301.96

Spindle Bushing - Used on spindle 70237434, on tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Part No: 70211743)
$13.44

Spindle Thrust Washer - For tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Part No: 70218762)
$5.67

Steering Arm, LH - Fits 1.610 inch diameter hole, keyed spindle, ball joint hole taper is .625 inch to .725 inch. For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Part No: 70245867)
$136.74

Steering Arm, RH - Fits 1.610 inch diameter hole, keyed spindle, ball joint hole taper is .625 inch to .725 inch. For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Part No: 70245868)
$136.74

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Used on Allis Chalmers D14, D15, D17, D19, RC when using later style steering joint # 224825, WC when using later style steering joint # 224825, WD, WD45 Diesel, WF when using later style steering joint # 224825. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Part No: 70224890)
$11.99

Steering Wheel - For D10, D12, D14, D15, D17, D19, D21. Steering Wheel. 17 1/2 inch diameter, splined hub. Black Plastic with Covered Spokes. Diamond Center AC Logo available as part number R3996. Also replaces 232033. (Part No: 70232033)
$48.30

Steering Wheel Center Logo - For D10, D12, D14, D15, D17, D19, D21. CHROME Steering Wheel Center Logo used on 70232033 and 70233851 steering wheels. Replaces 70228474, 70233852, 70246724 (Part No: R3996)
$19.50

Steering Wheel, Cream - For D10, D12, D14, D15, D17, D19, D21. Steering Wheel. 17 1/2 inch diameter, splined hub. Creme Plastic with Covered Spokes. Diamond Center AC Logo available as part number R3996. (Part No: 70233851)
$45.89

Steering Wheel Emblem Decal - 1-1/2 inches x 1-1/2 inches Black and Orange on White decal. Used as a steering wheel emblem on later model that did not use the metal emblem. (Part No: R5167)
$3.50

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Part No: 35P51)
$6.15

Steering Worm Shaft Bearing - This Steering Worm Shaft Bearing has a 1.197 inch inside diameter, a 1.700 inch outside diameter and is 455 inch wide. It fits (D14, D15, D17 Rear wormshaft bearing, manual steering only), D19 (rear wormshaft bearing, manual steering only - 1 used per tractor) Replaces original part numbers: 228150, 70228150. (Part No: 70228150)
$14.90

Tie Rod Assembly - Consists of OEM part numbers 70250140 and 70250141. Replaces: 249418, 225280, 225279, 254662, 254661. For (D14, D15, D17, D19, WD, WD45 Fits these models if cut to length), (170, 175, 180, 185, 190XT, 200 fits these models with standard front end). (Part No: 70254660)
$76.25

Tie Rod End, Female - 17.500 inches long. For tractor models 180, 185, 190, 190XT, 200. Will also fit 170, D14, D15, D17, D19 if cut to proper length. Can also replace 250142 used on WD, WD45 if cut to length. (Part No: 70254661)
$40.73

Tie Rod Male - Tie rod end with tube, outer. For adjustable front axles. 16-1/2 inches to center of post. 0.812 inch diameter. 50 inch minimum thread, not for Hi-Clear. For 180, 185, 190, 190XT, 200, D17, D19. (Part No: 70254662)
$30.11

Upper Steering Wheel Shaft Bushing - Inside diameter .883 inch, outside diameter 1.125 inch, thickness .995 inch. For the following models: D14, D15 (2 used), D17 (2 used), D19 (2 used), D21, I600 (2 used), 180, 185, 190, 190XT, 200, 210, 220, 600. Replaces 206968, 228188, 228255, 70206968, 70228188, 70228255. (Part No: 364527R91)
$8.48

Wheels
Bearing Cone - Inner cone for front wheel bearings. For tractor models 170, 180, 190, D17, D19. (Part No: 70209899)
$12.96

Bearing Cup - Inner cup for front wheel bearings. For 170, 180, 190, D17, D19 (Part No: 70235089)
$8.34

Bearing Cup - Outer cup for front wheel bearings. For 170, 180, 190, D14, D15, D17, D19, WC, WD, WD45 (Part No: 70209983)
$6.45

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. This additional charge will be added to your order. Replaces: 235727, 237405, 70235727, 70237405 (Part No: FW60166)
$62.28

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. This additional charge will be added to your order. (Part No: FW60156)
$56.28

Front Rim-Heavy Duty - Front Rim with weight holes. 4.5 inch x 16 inch, 2500 lb. capacity. 6 bolt, 6 inch circle, 4.62 inch pilot for 5.50 inch x 6.00 inch x 16 inch tires. Also replaces OEM # 70235086, 70248460. Fits Models: (D15 with serial number below 9001), (D17 with serial number below 75001), D19, ED40, 160, 170, 175, 180, 185, 190, 190XT, 6060, 6070. Additional $15 shipping due to weight. This additional shipping charge will be added to your order. (Part No: 8N1015D)
$58.51

Front Wheel Bearing Kit - This is a complete Front Wheel Bearing Kit for 1 wheel, with a 6 bolt hub. Verify individual part numbers to ensure you are ordering the correct kit. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 500, 600, 6060, 6070, 6080, 615, 7000, (D15 serial number 9001 and up with 6 bolt hub), (D17 serial number 42001 with 6 bolt hub), D19, I60, I600. Kit contains one of the following 15250B, 15118, 26823, 26882, 70235120. (Part No: WBKAC2)
$51.88

Front Wheel Lug Bolt, Pack of 6 - Used in many applications, this wheel stud has 1/2 inch - 20 NF thread, 1 inch thread length and 13/16 inch hex head. Used on Allis Chalmers 160, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, B, C, CA, D10, D12, D14, D15, D17, D19, G as rear rim lug bolt, WC, WD, WD45, WF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863. (Part No: 512581M1)
$7.65

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims 535453M91, 535452M91, PAR10X28, C5NN1050J and C5NN1050H. Replaces: 218662, 225190, 70218662, 70225190, 70273627. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Part No: C0NN1058A)
$3.66

Wheel Hub - For use with threaded hub cap, 4.620 inch diameter pilot hole, 6.00 inch wheel bolt circle, replaces OEM number 236706. For tractor models 170, 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060 with 96 inch tread), 6070, 6080, 615, (7000 early), D15, D17, D19, 160, 1600. (Part No: 70261418)
$87.87



Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$264.00

Decals and Emblems
AC Diamond Decal - Black and White, Milwaukee, 6 inches x 6 inches. Vinyl Cut. (Part No: R4634)
$16.28

AC Diamond Decal - Orange Background, 5 1/2 inches x 5 1/2 inches. (Part No: R4633)
$10.10

AC Diamond Decal - Black and White, 4 inches x 4 inches, Vinyl Cut. (Part No: R4632)
$13.02

AC Diamond Decal - 1 inches x 1 inches orange, blue and gold printed on vinyl. (Part No: R5234)
$3.26

AC Logo Decal - 1-1/2 inches x 8 inches, Black and Orange on White. (Part No: R0675)
$5.56

AC Logo Decal - 3 inches x 18 inches, Black and Orange on White. (Part No: R0676)
$11.04

AC Logo Decal - 24 inches long, Black and Orange. (Part No: R0677)
$30.72

AC Logo Decal, New Style - 3-1/2 inches x 3-1/2 inches Black and Orange on White. (Part No: R5168)
$5.65

AC Logo Decal, New Style - 4-1/2 inches x 4-1/2 inches Black and Orange on White. (Part No: R5169)
$5.82

AC Logo Decal, New Style - 8 inches x 8 inches Black and Orange on White, printed on vinyl. (Part No: R5233)
$30.93

Power Shift Decals - One pair, white. For the cab on some Allis models. (Part No: R0674)
$25.14

Electrical System
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1952 & newer). Just call us at 800-853-2651. NOTE

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Part No: ADR9209)
$13.67

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: ADR9209)
$13.67

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket For Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 8NL10302)
$12.53

Battery Thermal Wrap - This thermal battery wrap is used to keep your battery warm. It is 60 Watts and measures 28 inches long. (Part No: BTW28)
$22.50

Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)
$53.81

Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$32.25

Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models (Part No: D4PE12029AA)
$12.06

Coil - Universal 12V - Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt system without the resistor. Replaces: 74061737, 74514967. (Part No: D5TE12029AB)
$10.04

Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25

Spark Plug - Extended tip, 14mm thread, 3/4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$3.12

Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$3.12

STARTER - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Verify OEM part before ordering. (Part No: 1871662)
$67.02

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.55

Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.45

Terminal Kit - Deluxe solderless terminal and connector assortment. 175 pieces. Includes female slip ons, oval butt connectors, ring connectors, male slip ons, spade terminals, and wire splice. (Part No: B1SB22)
$34.19

Engine Gaskets
Gasket Material, Cork Rubber - 1/16 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR116)
$8.93

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Part No: PRM77BR)
$8.45

Engine Parts
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Pistons and Sleeves
Cylinder Hone - For bores from 1 1/2 to 3 inches. Easily adjusts. Length of 7 3/4 inches. Comes with stones. Call for replacement stones. (Part No: B1SB1704)
$16.68

Engine Rings
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System
Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89020C)
$78.88

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89025C)
$95.03

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.75 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89027C)
$99.58

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89051C)
$121.42

Chrome Exhaust Stack - This Chrome Stack is single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Part No: 146520CHR)
$112.10

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89054C)
$115.52

Chrome Exhaust Stack - This Chrome Stack is single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Part No: 146490CHR)
$131.51

Muffler Clamp, 1-1/2 - New Clamp for 1-1/2 inch outside diameter muffler inlet. (Part No: MC112)
$2.22

Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Part No: MC114)
$3.98

Muffler Clamp, 1-1/8 - New Clamp for 1-1/8 inch outside diameter muffler inlet. (Part No: MC118)
$4.17

Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Part No: MC134)
$2.99

Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Part No: MC138)
$2.50

Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Part No: MC214)
$4.13

Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Part No: MC234)
$4.50

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Part No: MC300)
$3.53

Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Part No: MC312)
$4.75

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Part No: MC400)
$7.50

Muffler Clamp, 4-1/2 - New Clamp for 4-1/2 inch outside diameter muffler inlet. (Part No: MC412)
$9.55

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Part No: MC500)
$7.98

Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$6.51

Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$7.25

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$7.10

Rain Cap - This rain cap is for a 2.75 inch pipe. (Part No: R1804)
$8.21

Rain Cap - This rain cap is for a 3.5 inch pipe. (Part No: R1806)
$10.34

Rain Cap - This rain cap is for a 4.0 inch pipe. (Part No: R1807)
$9.80

Stainless Steel Clamp, 2.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90871A)
$10.86

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90872A)
$9.45

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90875A)
$9.62

Fuel System / Air Intake
Carburetor Elbow & Strainer - Fits some Allis Chalmers models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Part No: 9N9553)
$5.13

Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Part No: BF7736)
$2.45

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$37.65

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter (7/32)- 2.53 inch Overall Length. Outside diameter of screen is 0.375 of an inch. If the Insert (7/32) is too large, you can use a 7/32 drill bit to enlarge the hole in the fuel filter assembly. If the insert is to small, use foil to shim. (Part No: R7949)
$9.90

Marvel-Schebler Service Manual - This Service manual is a complete manual for all DLTX and TSX model carburetors. Comes with tractor carburetor principle of operation and overhaul step-by-step instructions. 21 Pages. (Part No: MAR_CARB_SV)
$9.95

Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: C1778R)
$1.95

Gauges
Ammeter Gauge - 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)
$13.83

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)
$46.42

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch -24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)
$25.34

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)
$13.96

Temperature Gauge, Universal - For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$17.01

Temperature Gauge, Universal - Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Numeric Face. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch metal wrapped capillary line. (Part No: UTG25)
$22.37

Hitch / Drawbar
HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four(4) of HP-4 (wire diameter 5/32 inch, length 2 15/16) inch, four(4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three(3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Part No: HPA15X)
$8.13

Hair Pin Cotter Assortment - Hair Clips sizes from 1/16 x 1 3/8 to 3/16 x 3 1/4. Total of 141 pieces in 6 sizes. (Part No: B1SB16)
$27.51

Hitch Ball 10000LB 2-5/16 - 2-5/16 ball size, 1-1/4 stud thread, 2-1/2 stud length, 10, 000 LB max load capacity, three chrome hitch ball class. (Part No: CHB2516114)
$23.85

Hitch Ball 15000LB 2-5/16 - 2-5/16 inch ball size, 1-3/8 inch stud thread, 2-5/8 inch stud length, 15, 000 LB max load capacity, three chrome hitch ball class. (Part No: CHB2516138_)
$25.04

Hitch Ball 2000LB - 1-7/8 ball size, 3/4 stud thread, 1-3/4 stud length, 2000 LB MAX LOAD CAPACIRY, ONE CHROME hitch ball class. (Part No: CHB17834)
$13.37

Hitch Ball 3500LB - Hitch ball. 2 inch ball size, 3/4 inch stud thread, 1-7/8 inch stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.74

Hitch Ball 5000LB - Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1/8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

Hitch Ball 5000LB 2-5/16 - Hitch Ball, 2-5/16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

Linch Pins, Pack of 10 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$2.55

Linch Pins, Pack of 10 - Package of 10 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 10. (Part No: DKLP91)
$3.15

Linch Pins, Pack of 10 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long.***Enter 1 for package of 10*** (Part No: DKP316)
$1.95

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. This additional charge will be added to your order. (Part No: HF141101)
$247.02

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$21.81

Hydraulic System
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Part No: H42-2M-180)
$51.75

Universal Pressure Gauge, Hydraulic - 200 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Part No: GG200)
$10.62

Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

Axle Nuts (5) - 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.69

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22)
$6.30

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$1.94

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$176.32

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: BH215)
$106.08

Caster Fork Assembly - New Style Fork style assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). Vertical shaft is 1.5 inches O.D., 8 inches in length. Fork spread is 6 inches. (Part No: 12528)
$92.76

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)
$19.95

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$28.38

HUB with BRG CUPS - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: BH1311)
$24.90

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)
$44.70

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)
$77.06

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166)
$97.46

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166)
$97.46

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)
$100.37

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)
$100.37

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)
$100.37

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163)
$109.42

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.56

Tail Wheel Assembly - 6 inch x 9 inch tail wheel assembly with laminated tire, less hub. 4 inch pilot, 5 bolt holes, 5-1/2 inch bolt circle. 5-1/4 inches wide, 21 inch outside diameter, 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)
$21.75

Lights
Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R)
$27.74

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2 inch x 6 inch weather resistant steel body (black), glass lens, flood pattern, 140 foot beam. Halogen bulb, 12 volt, 55 watt, replaceable. 12 foot cord with cigarette lighter plug. (Part No: L100MAG)
$43.12

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)
$75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.41

Miscellaneous
Canopy - 60 inches wide x 65 inches long, molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through molding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. This additional charge will be added to your order. (Part No: B257X)
$430.31

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604)
$65.44

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP hoop type ROP frames up to 52 inches wide with leg thickness up to 4 inch x 2 inch. (Part No: B6602)
$110.28

Canopy, Small Tractors - 45 inches wide x 60 inches long. Molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through molding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. This additional charge will be added to your order. (Part No: B257XSTD)
$374.50

Deluxe Canopy, 3 Bow - Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100R)
$235.53

Deluxe Canopy, 3 Bow - This UNIVERSAL Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100B)
$192.01

HAND CLEANER GALLON - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218)
$28.72

Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250)
$25.68

Acrylic Hardener, 16oz - This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12P)
$42.20

Acrylic Hardener, 8oz - This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12HP)
$19.46

Aluminum High Heat Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP402HHSP_)
$34.83

Black Hi-Heat Spray Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP411HHSP_)
$49.02

Paint, Allis Orange, 1 Quart - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP280QT)
$17.55

Paint, Allis Orange, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP280SP)
$44.19

Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312GAL)
$44.00

Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312QT)
$17.55

Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312SP)
$44.19

Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447GAL)
$58.92

Paint, Clear Coat, 1 Quart - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447QT)
$21.99

Paint, Clear Coat, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447SP)
$44.19

Paint, Gray Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700GAL)
$44.00

Paint, Gray Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700SP)
$44.19

Paint, Red Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP3987GAL)
$44.00

Paint, Red Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP3987SP)
$44.19

Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225GAL)
$44.00

Paint, Satin Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225SP)
$44.19

Paint, Yellow Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2720GAL)
$44.00

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)
$68.39

Slip Resistant Coating - Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT)
$29.64

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. (Part No: BL116KIT)
$99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$50.00

PTO / Driveline
Driveline Assembly - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333 mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit is 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1333 mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138)
$201.19

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Part No: AB4111WY)
$187.82

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111K33)
$288.01

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$235.29

Seats
Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt –up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt –up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056)
$1437.23

Seat, Air Suspension, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1518.86

Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18 inches wide, 19 inches high, 21 inches deep. (Mounting holes 9 inches wide x 9-3/4 inches deep). Fits several Commercial Turf/Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY)
$102.91

Seat, Universal - **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. Add $15.00 additional shipping due to weight. This additional charge will be added to your order. (Part No: TS1040ATSP)
$82.25

Seat, Universal - BLUE Universal application leatherette suspension seat. For most compact, agricultural and industrial tractors. Adjustable base for 5 different mounting angles, internal suspension weight adjustment, special slotted base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, adjustable slide track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Add $30 additional shipping per seat due to size and weight. This additional charge will be added to your order. Color is BLUE. (Part No: TS1060ATSP)
$109.71

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP)
$111.12

Seat, Universal - Seat assembly, black leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before purchasing. Weight 33 pounds. (Part No: TS1110BK)
$151.36

Seat, Universal - Seat assembly, blue leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110BL)
$113.74

Seat, Universal - Seat assembly, yellow leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110YL)
$110.68

Tie-On Seat Cover - Orange and White, 21 inches wide. Fits 19 or 21 inch wide pan seats. Deluxe with 2 inches of foam. (Part No: R1012)
$36.00

Universal Seat - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15 inches wide, 17 inches long, 19 inches high to the back of the seat. (Part No: TS1015)
$182.49

Universal Seat - Universal Vinyl seat has Multiple mounting holes, ranging from 4 inch to 11 inch center to center (front to back) and 6-1/2 to 13 inch center to center (side to side). Customer needs to verify it will work for their tractor. Seat cushion width is 18 inches. An adapter plate may need to be made for some models. Slide track for forward/rear adjustment. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. (Part No: TS1100)
$113.34

Sheet Metal / Body Parts
2 Hour DVD - The How To of Sheetmetal Repair - This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD)
$25.68

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140)
$31.59

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Part No: RPD112K)
$146.93

SAFETY STEP KIT - Traction Where you need it. Great for use on tractor and combine steps, trailers, grain bin ladders and more. Kit includes 1 pint safety base and safety grit. (Part No: SSK14011)
$53.12

Toolbox, RED - This RED universal toolbox fits various tractor models. It measures 11 inches long, 4 inches wide, and 4 1/2 inches tall. The mounting holes must be drilled to match your tractor. (Part No: ABC308)
$41.99

Steering
Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Part No: S03-1003)
$384.33

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Part No: AE33538A)
$14.12

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Part No: ABC1417)
$44.46

Tools
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891)
$15.23

Chain Binder - 1/4 inch chain binder, 2600 pound load limit. (Part No: LL104)
$36.73

Chain Binder - 3/8 inch chain binder, 5400 pound load limit. Use with either 5/16 inch or 3/8 inch chain. (Part No: LL105)
$42.63

Chain Binder - 1/2 inch chain binder, 9200 pound load limit. Use with either 3/8 inch or 1/2 inch chain. (Part No: LL106)
$79.85

Digital Calipers, Stainless - High quality hardened stainless steel digital caliper. Calculates measurements up to 6 inhces with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6)
$33.05

Grease Gun - Grease Gun. Pistol handle grease gun uses standard 11 inch grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121)
$29.17

Grease Gun - Spring fed 11 inch barrel grease gun. Uses standard 11 inch grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080)
$20.66

Grease Gun - HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142)
$36.00

Grease Gun CLAMP - Clamp holds all 2-1/4 inch diameter barrel hand guns. Bolts or screws anywhere through hole in bracket base. (Part No: GC102)
$11.21

Grease Gun PowerLuber 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)
$134.19

Grease Gun PowerLuber 14.4V with CASE 1 BAT - Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)
$288.95

Grease Gun PowerLuber 14.4V with CASE 2 BAT - Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)
$403.25

Grease Hose 18 Inch - 18 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: G118)
$10.59

Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: S.58474)
$267.39

O-Ring Assortment - Neoprene o-rings from sizes 1/8 x 1/4 to 3/4 x 1 inch. Total of 225 pieces in 11 sizes. (Part No: B1SB12)
$24.30

Winch Remote, Wireless - Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003)
$22.48

Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0002)
$110.33

Winch Set, 2500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0004)
$110.33

Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0001)
$124.13

Tractor Manual Search - Yesterday's Tractor Co.

Wheels
Bolt & Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. (Part No: S.04352)
$2.58

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. This additional charge will be added to your order. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Part No: FW55166)
$61.84

Rear Rim Carriage Head Bolt and Nut - 2.5 length, 5/8 diameter FF Carriage Head Bolt with nut. PRICED EACH. (Part No: HB250)
$3.75

Stop Body - Fits various tractors models with power adjust rims. Replaces part numbers: 219456 and 70219456. (Part No: C0NN1057A)
$15.24

Tire and Tube - This 4.00 inch x 12 inch 3 rib tire comes with a tube and fit various tractor models. (Part No: 400x12-3)
$55.57

Tire Bead Buster - Handy for breaking the bead when removing tires. No electricity, pneumatics or hydraulics needed. (Part No: S.29300)
$429.75

TIRE GAUGE - Gauge has special oiling and pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350)
$11.79

TIRE GAUGE DIAL - Precision Bourdon Tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG)
$13.07

Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Brass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599)
$40.14

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Part No: 500X15TB)
$19.04

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$50.00

Tire, Three Rib - Front Tire, 3 Rib, 6.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. This additional charge will be added to your order. (Part No: 650X16)
$89.70

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Part No: WHS050)
$17.58

Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 7.5 x 24, 8.3 x 24, and 9.5 x 24. (Part No: WHS060)
$42.21

Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Part No: WHS059)
$51.89

Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Part No: WHS058)
$44.71

Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Part No: WHS061)
$60.00

Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Part No: WHS062)
$49.61

Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for radial tires. (Part No: WHS064)
$58.29

CategoriesAll D19 Parts
Manuals
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
Allis Chalmers D19 Manuals
D-19 G&D Service Manual 152 Pages (Part No: AC-S-D19) $29.95

D-19 I&T Aftermarket Shop Manual 296 Pages (Part No: AC-202) $32.95

D-19 Dsl, Covers the Dsl Pump and Fuel System ONLY Service Manual 120 Pages (Part No: AC_FUELINJ_SV) $29.95

D-19 G&D Parts Manual 302 Pages (Part No: AC-P-D19) $50.95

D-19 G&D Operators Manual 66 Pages (Part No: AC-O-D19) $20.95

Miscellaneous Related Items
Hat
New Allis-Chalmers mesh - Solid black hat with mesh back and plastic snap size adjuster featuring the new Allis-Chalmers logo. (Part No: NACM)
$13.95

New Allis-Chalmers flame - 100% cotton, 6 panel hat black with orange flames and new style Allis-Chalmers logo. (Part No: NAFL)
$19.95

Allis Chalmers solid black with sandwich brim - Black hat with white accents and sandwich brim, 65% polyester, 35% cotton. (Part No: ACSBS)
$13.95

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

[Categories]   [All Allis Chalmers Models]   [Print]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2021 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy