Posted by rustyfarmall on April 18, 2011 at 14:07:36 from (209.152.78.140):
In Reply to: Carburator posted by TMo on April 18, 2011 at 13:43:31:
Quoting Removed, click Modern View to see
I know next to nothing about those Holley tractor carbs, but I suspect they are made of aluminum, and aluminum is prone to warping, and if that is the case you would be better off to buy a new Zenith or maybe a Marvel-Schebler if one is available for your tractor. Incidently, Tisco is a supplier that sells both Zenith and MS carbs. They do not make carbs, so there is no Tisco brand carburetor.
Having said that, before you toss that Holley, give it one more shot, and this time clean the needle valve AND seat with spray carb cleaner, blow them dry, and then give each a quick spray of aerosol silicon lube, let it dry, and then assemble the carb. Make double sure the float height is correct, the float is not full of gas, and the float is not hanging up or dragging on anything.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.