The other side of that.... there's a lot of people in the business that mabey don't have a lot of life experience. They know how to do work on these wells 'by the book'.... insofar as they have one way of doing things and that's where their experience lies. What they need right now is someone who has ample experience with.... developing 'presidential solutions'. Pardon the phrase. Combine that with someone who actually knows the cababilities of those ROV's.
It does strike me that what they're trying right now is plainly doomed to fail as they're basically trying to fit a cap with a hose nipple about 1/10 the size of the well pipe in terms of flow capacity.... I mean there isn't a lot of understanding of hydraulics there if they're trying something like that. AS far as I can tell right now there's as much oil pouring out around the cap as there is going out through the nipple. The basic premise might work if they fitted a full flow valve in place with a decent riser above it... I'd also wonder if it isn't possible to weld it in place... I mean... robotic welding is not a new thing nor is underwater welding... Question is... logistically can a robot weld under water and can you get a power supply to 4900 feet of depth... The only way I see them ever stopping that leak from the top is with a very small team of cowboys... and the 'cowboys' of the cowboys at that. Average isn't going to cut it this time.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.