Tractor Talk Discussion Board |
Re: slow punctures
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by David Snipes on January 30, 2007 at 07:47:23 from (198.239.217.184):
In Reply to: slow punctures posted by charlesmacleod on January 30, 2007 at 07:35:43:
The first thing I would do is check the valve core and valve stem insert with soapy water to see if it has a slow leak. When I take the tube out and check it, I don't have a large immersion tank, so I use soapy water in a spray bottle or you can wipe it on the tube with a rag. You will need to inflate the tube larger than it would be in the tire to make a small leak more easily noticed. For tiny leaks you have to be slow and meticulous in your inspection. If you don't find it after covering evey inch of the tube, try again later. If you still have no success,have another person check; he may see what you have missed; or you could try inflating it even more. If that didn't work, I would try some tire sealant. Make sure to inspect every inch of the inside of the tire for anything poking through. Also inpect the inside of the rim for anything sharp.
Replies:
Home
| Forums
Today's Featured Article -
An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|