Tractor Talk Discussion Board |
Re: Message to Allan in Ne
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by 135 Fan on November 11, 2006 at 18:28:22 from (68.149.51.133):
In Reply to: Re: Message to Allan in Ne posted by Bob on November 11, 2006 at 17:57:31:
I think Allan is trying to do it the best possible way that will work to his satisfaction without breaking the bank. Nothing wrong with asking for advice. Hydraulics can be complicated. Maybe someone has done what he is trying to do. I think with good new hoses he could have used his old valve in the cab without fear of any leak. He's Decided to use a different valve and it isn't a straight forward swap. The single acting section throws a whole new loop into the eqaution. I'm sure a shop could set it all up for him like it came from the factory. For just $2000 or more. Ever look at a hydraulics diagram for an excavator? It's like a maze of valves and hoses and all kinds of other components. I like seeing Allans progress in his pictures. Judging by the way his equipment looks, I'd say he likes to do things the right way. Dave
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|