Tractor Talk Discussion Board |
Re: case 500 diesel injection pump
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by J. Schwiebert on February 19, 2005 at 15:54:40 from (209.143.23.100):
In Reply to: case 500 diesel injection pump posted by diesel on February 19, 2005 at 13:41:48:
I am not a Case man last Case on this farm was a cross motor, but am trying this for the challange of the Bosch PSB pump. How long has it been since the tractor last ran. Have you verified that the transfer pump is building at least 5 pounds of pressure. How are you bleeding the high side? If you loosen say three high pressure lines at the pump will fuel dribble out of the lines?. Have you checked the movement of the fuel shut off? Have you had the timming window cover all and verified that the govenor does move the control arm and that the pump rotates? Was the pump off? Remember they are driven at crankshaft speed, fairly easy to get one turn out of time. Start there and let me know If you have questions ask away.
Follow Ups:
Home
| Forums
Today's Featured Article -
Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|