Tractor Talk Discussion Board |
Re: j.d. 430 pto
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Gene Davis (Ga.) on February 16, 2005 at 17:54:04 from (66.82.9.14):
In Reply to: j.d. 430 pto posted by ken in pa on February 16, 2005 at 09:15:51:
Is this a live pto? They were available as optional equipment on the 430. if this is the case, it has a 2 stage clutch and pressure plate and has to be aduusted seperately from the wheel clutch pressure plate. The first half of the clutch movement disengages the wheels and the last half disengages the pto. This is a real lulu to reassemble when you break the tractor apart and replace clutches and disks. Very nerve wracking to line up those 2 sets of splines, as one set is fine and the other set is coarse. When assembled you will be able to breathe again. Many clutch disks have been ruined by getting in a hurry on this job. Trust me I learned it the hard way!
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|