Tractor Talk Discussion Board |
Re: Re: Re: Re: Re: attaching bush hog to 3 point hitch
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Rick K on April 21, 1999 at 08:11:25:
In Reply to: Re: Re: Re: Re: attaching bush hog to 3 point hitch posted by Andrew Krein on April 20, 1999 at 23:43:46:
if they sent you the same brand PTO shaft, here is how you get to the shear bolt. There is a little black plastic pin in the U-Joint cover. It is labeled with a picture of Lock-Unlock. What you have to do is actually pry the little pin out of it's retaining device. This allows the U-Joint cover to be rotated so that the white colored nylon things line up with the clearance slots in the cover. Then you slid the whole thing back, away from the U-Joint. Re-assemble in reverse. I commend you on your dexterity if you managed to get the shear bolt in without doing this!
Follow Ups:
Post a Followup
|