Re: FIRING ORDER
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Mark R. on July 11, 1998 at 21:11:58:
In Reply to: FIRING ORDER posted by W.L.CARTER on July 11, 1998 at 11:59:38:
Not nowing if the distributor has been out before, you need to get # 1 cyl at Top Dead Center. One way to do this is to remove # 1 spark plug, put your finger over (not in) the spark plug hole, and turn the engine over slowly. When you feel compression with your finger, you are near TDC. Now align the timing mark on the crank. Now you have found TDC for # 1 cyl, which is approx where the plug fires. Now pull the distributoir cap and the rotor should be pointing to the # 1 plug terminal. Be sure to put the wires in the cap in the right direction. Hope this helps. Mark R. : I HAVE A EARLY 60S MODEL FARMALL 140 6 VOLT THAT I NEED TO KNOW THE FIRING ORDER AND THE NUMBER 1PLUG LOCATION ON THE DISTRIBUTER
Follow Ups:
Post a Followup
|