Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 
Marketplace
Classified Ads
Photo Ads
Tractor Parts
Salvage

Community
Discussion Forums
Project Journals
Your Stories
Events Calendar
Hauling Schedule

Galleries
Tractor Photos
Implement Photos
Vintage Photos
Help Identify
Parts & Pieces
Stuck & Troubled
Vintage Ads
Community Album
Photo Ad Archives

Research & Info
Articles
Tractor Registry
Tip of the Day
Safety Cartoons
Tractor Values
Serial Numbers
Tune-Up Guide
Paint Codes
List Prices
Production Nbrs
Tune-Up Specs
Torque Values
3-Point Specs
Glossary

Miscellaneous
Tractor Games
Just For Kids
Virtual Show
Museum Guide
Memorial Page
Feedback Form

Yesterday's Tractors Facebook Page

  
Tractor Talk Discussion Board

Re: 1997 F150 Coolant


[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]

Posted by Hal/ Eastern WA on July 25, 2013 at 12:35:22 from (97.115.186.183):

In Reply to: 1997 F150 Coolant posted by DaninKansas on July 24, 2013 at 13:35:00:

Back in the 60"s I was going to drive our 2 or 3 year old Plymouth Valiant to Seattle one hot Summer day. I noticed that the temp gauge was kind of high while going across the flat area West of Moses Lake. But then my Mom and I crossed the Columbia River and climbed the approximately 10 mile Vantage Hill. The temp REALLY went up, and I decided we needed to run the heater to try to get some more cooling. So we roasted in the non-air conditioned car until we reached the rest area at the top. The Valiant was not boiling, and we did not lose any coolant. I had thought that the problem might be bugs in the radiator fins, but I found that there were only a few. So I decided there must be something else wrong. I knew enough not to open a hot radiator, so I poured some water over the radiator and then let it cool down for about an hour. When I finally opened the radiator, I found that the coolant was very orange and was about as thick as whole milk from a Jersey cow. I didn"t have any tools or anything along to try to fix the problem and was more than 150 miles from home. My Mom and I decided that we would continue on our trip to Seattle and would carefully monitor the temp. If it got too hot, we would run the heater full blast.

We climbed Snoqualmie Pass and the air got cooler, so we didn"t have any more real trouble and we arrived at my Sister"s apartment in Seattle.

The next morning I decided to try flushing out the crud in the radiator. I got a garden hose and opened the radiator drain valve. The "coolant" flowed slowly out of the valve and onto the parking lot. I started pouring water into the radiator and after a few minutes, the flow out the drain was nearly clear. I then filled it up and closed the valve. I started the engine and let it warm up to operating temperature. Then I let it cool down a bit and opened the drain valve again. The flow was still quite orange, but it was not nearly as viscous or thick. After I drained the radiator again and refilled it, I decided that I had done what I could and hoped the car would run OK.

One thing I had not thought about was the rust stain the procedure left on that apartment parking lot. I ended up scrubbing it with a brush and the garden hose, but some of that rusty trail remained. The manager was not pleased with the mess I made, but nothing really happened about the stain. I felt bad about it.

Our trip back to Spokane was uneventful and the temperature never got hotter than normal. My band-aid repair of flushing the system out and adding plain water worked! At home, I installed a drain valve in the block of the Slant 6 to replace the steel plug and a flushing tee in the heater hose and did a proper job of flushing the whole system. With new Prestone and an extra can of anti-rust, the car was ready for the coming Winter.

I would assume that the rusty, contaminated coolant I discovered at the Vantage rest area was the original coolant that came in the car when we bought it new. Obviously the antirust ingredients in the coolant had worn out or at least were not working any more and had not been for some time. I don"t remember ever opening the radiator before, as I was a pretty new driver at that time and didn"t know better. My Dad probably never checked the coolant either. At any rate, the system had rusted very badly, probably from the engine block. The situation didn"t seem to damage anything. We had that car for several years after that and never had a bit of trouble with it. I did check the coolant several times a year after that and do so on all of my machines. If I see any brown tint to coolant, I replace it right away.

I wish I had saved a sample of that thick, rusty coolant. It would have been interesting to have tested it to see what the PH was and also to see if it was still effective as an anti freeze. It also would have been nice to have been able to show my Dad how really bad the coolant had been.

I would drain out the brown coolant, flush the system and replace it with new, quality antifreeze. But from my experience, I would suggest being careful with the brown liquid, as it might stain whatever you pour it on. Good luck!


Replies:




Add a Reply

:
:
:

:

:

:

:

:

:

Advanced Posting Options

: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.



 
Advanced Posting Tools
  Upload Photo  Select Gallery Photo  Attach Serial # List 
Return to Post 

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming. ... [Read Article]

Latest Ad: Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor [More Ads]

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy