Posted by Lloyd in South Carolina on September 06, 2011 at 07:41:46 from (162.111.235.14):
Hit a major milestone this past weekend, on Friday they poured the footings and the slab for our barn at our future home. (building the barn first, then going to sell our house, store stuff in the barn and either rent a apartment or live there in our RV while the house is built.)
Started this project in May of 2009, cleared many tree's, built nearly 1,400' of driveway, moved a lot of dirt with our JD4510 and CAT 935c. However this milestone moved us from earth movers to builders. Exciting stuff.
Installing french drain and downspout drainage pipes this weekend, and then the block work will begin. 810 blocks to be layed. Standard stick framing building for the rest. Metal roof and sides are planned. I'll share pics as we go. Hope to have it dried in before winter. This is South Carolina, winter is 3 + months away, however I only have weekends.
PS The building is 42'x50', monitor style. The forms in front are for the 46'x12' apron in front.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.