Posted by Owen Aaland on May 28, 2014 at 13:54:55 from (216.47.33.5):
In Reply to: repair posted by jeffcat on May 27, 2014 at 17:50:35:
Quoting Removed, click Modern View to see
Actually the main clutch has nothing to do with the transmission being hard to get out of gear in this situation.
What actually happens is the TA clutch is not fully released when the main clutch is released. As the tractor rolls backwards the ramp and rollers lock up in the TA and since the TA clutch is not released the TA assembly cannot turn backwards and there is pressure on the transmission gears as the tractor is held in place. Pulling back on the TA lever will release the TA clutch which allows the planetary gears in the TA to spin so the transmission input shaft can rotate backwards releasing any pressure on the transmission gears. The transmission can the be shifted.
The purpose of the link between the main clutch shaft arm ans the TA clutch shaft arm is to release the TA clutch just slightly after the main clutch is released as the clutch pedal is pushed down. When the clutch pedal is released the TA clutch engages just before the main clutch. If the TA clutch is not released you will have shifting problems. If the TA clutch is released before the main clutch, as the pedal is released the main clutch will engage and the tractor will start to move with the TA pulling on the low side. As you continue to release the pedal you will feel the tractor shift speeds as the TA clutch locks up.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.