Posted by GlenIdaho on March 28, 2013 at 20:44:00 from (65.129.106.214):
I'd like some advice on painting an aluminum sectional garage door. The problem: Someone painted it with latex and it is now cracking. Paint is solid but cracking. The metal has a dimpled finish. Cannot sand.
Possible Solutions: 1. Use a heavy bodied primer to bridge the cracks and top coat with latex.
2. Have door sandblasted, apply epoxy primer and use an automotive paint for a top coat.
Potential Issues: 1. Using the latex primer and top coat I fear the same problem developing because the paint will be so thick it will eventually crack.
2. The thickness of the paint will cover the dimple finish. (I plan on using an airless sprayer)
3. I desire to have a semi-gloss finish with the automotive paint.
Questions: 1. Any other solutions to use on the currect latex? 2. Do you agree it will most likely crack too? 3. Is the automotive paint as durable? 4. Will adding chems to get a semi gloss finish effect durablity and longevity? Any other choices? Thanks
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.