Posted by Dick L on January 28, 2013 at 16:36:46 from (50.51.167.123):
In Reply to: Cuting fluid posted by Red Pete on January 28, 2013 at 13:23:36:
You might be looking for this.
You can use a machine oil, chlorine, and sulfur. When I first started doing machine work in the early 1960's it was what we used. I never made it myself so don't know the amounts. They melted the sulfur in a tin can and added it to the mixture.
The one below would be an easy one to mix up.
Things You'll Need
1 qt. of motor oil
3 cups of dish washing liquid
4 gallons of water
Instructions 1
Purchase the necessary products. Motor oil can be found at your local gas station and dish washing liquid at convenience stores and supermarkets.
2
Add the liquid soap to the water. Mix the soap into the water so that it is dissolved. The soap is the catalyst that will enable the oil and the water to mix; otherwise the different densities will make the oil float on top of the water.
3
Pour in the motor oil. Make sure that the water and the oil are mixed properly together with no separation. The water will act as a coolant in the cutting oil, while the oil acts as the lubricant, as the water is evaporated off by the heat generated in the cutting process.
Read more: How to Make Cutting Oil eHow.com http://www.ehow.com/how_6860630_make-cutting-oil.html#ixzz2JJtO8LcW
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.