Posted by Hobo,NC on December 28, 2012 at 18:14:15 from (98.16.2.64):
In Reply to: Coats 1001 Balancer posted by MarkWV on December 27, 2012 at 17:59:52:
Lazy WP said: (quoted from post at 05:59:52 12/28/12) I put new tires on the ranch pickup tonight, and had a terrible time trying to get them balanced. Took a dozen tries on the last one, and got it with in an oz. I have used this thing before, and fought with it some, but NEVER like tonight. Am I missing something? I just use it for the ranch work, but have balanced a couple dozen sets of tires this year.
You may not have the correct adapter for for rim... I have ran into that some use the center and some need a adapter that uses the lug bolt pattern (like my 77 ford F350)...
This post was edited by Hobo,NC at 18:14:43 12/28/12.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
Looking 4 set 9 bolt hubs 3 1/8 inch to fit 60 to 4010 jd
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.