Stationary Engines Discussion Board |
Wisconsin VH4D
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Rob D. on May 14, 2002 at 17:41:55 from (65.129.152.48):
I hope some one can help me!!!! I bought a skid steer with a VH4D wisconsin motor. I have heard a lot of good things about Wisconsin motors. But this is the first one that I have ever owned. So my first question is where I would be able to get ahold of an service/parts manual for this motor? Secondly does any one have any good suggestions on where I can get parts for this. I hope that most of them are still able to be gotten. As I got a spare motor coming and I would like to get this rebuilt and ready to put in. And lastly I'm experancing some diffcultly with the way that this is running. I did a complete tune up on this plugs,cap,rotor,wires,point and condensor. It starts up great and idles great too, but if you rev it up fast it acts like it is cutting out it spits and sputters really bad before it finally gets up to the desired RPM then it smooths out up to about 3/4 throttle from there on up it does not want to smooth out. The exact same thing happens every time that the governer kicks in. To me it almost acts like it is getting flooded as it choks out some black smoke as well. I'm not really sure where to start. I pulled the carb off took apart and cleaned it all up and it still is doing the same thing. I sure hope that some one can steer me in the right direction on all of my questions. I thank all of you for your info in advance. Rob D
Follow Ups:
Home
| Forums
Today's Featured Article -
Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
Latest Ad:
Super WD9.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|