Posted by Gearhead210 on August 30, 2013 at 16:09:28 from (50.33.226.209):
This may be digging up old posts, but when searching I come up with blanks. But anywho... I hear rumor that a 450 roosamaster/stanadyne pump head is adaptable to the CAV rotary pumps on the 354 Perkins's (or the entire pump is being used). Columbus Diesel was not much help when called about it- I would like to discuss the fuel options for the 354's. It seems like it would be "easy" to put a DB2 pump on one of these, which would get far more than the Lucas CAV pump ever could, thoughts and comments are welcome. This will be used on "farm stock" pulling, (the word "stock" must be used very loosely) in a massey 1130. I've got a MF 750 Combine turbo and injectors in there, only because they were in better shape than the originals- and would be completely fine with making bigger lines and lasering out some new tips for the injectors. Thanks in advance for any help. I would rather not put an inline pump on its end for this, although there were pics of an 1135 with that setup floating around somewhere that looked really really good.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - What Oil Should I Use? - by Francis Robinson. I keep seein this question pop up over and over again in discussion groups all over the web. As with many things there are often several right answers and a few wrong ones. Some purist I'm sure will disagree to no end with what I will tell you but most of us out here in the real world don't really care do we ? Some of them only bring their noses down out of the air long enough to look down them anyway. If you are like me you are only doing this old tractor stuff because you enjoy it. You
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.