Posted by Mopower on February 25, 2013 at 12:14:49 from (64.208.152.151):
I'd be interested to hear from some of the other tire geeks on YT as to their experiences with older (and new if you wish) rubber quality and the effects of age or abuse on different brand of tires generally used today for pullers. Here's my assesment of ten years buying/selling/trading tires.
GOODYEAR Older Goodyear tires from the 40's & 50's seem quite robust to the elements. However, there was a point in the company's history at which the sidewall quality suffered. All newer Power Torque, Traction Torque, and 45deg Diamond tires crack on the sidewall eventually, usually before the tread warrants replacement. Traction Torque tires in particular have a split in one line entirely around the sidewall, only seen when flexed or when the casing finally starts to split. Twenty five years on a moderately used Moline loader yielded no significant tread wear, yet both 14.9X28 6 ply tires split and blew the sidewalls out on the same day with 12-14 pounds of air pressure in them. Other sizes have yielded similar results. The old Power Torques (predecessor to the Traction Torques) seemed tough, but hard to find.
B.F. GOODRICH The rubber of almost all the BFG tires I've used or owned stays very shiny and black, even with the pounding the sun gives them. The rubber cuts very nice. Some pairs I've owned were incredibly old, still maintaining their good appearance. They do wear faster than some. The 30degree tread tends to crack in a major way between the bars on almost every one I've owned. I've had tube eventually creep out of some cracks and fixed with a good boot job. Very similar to Co-op Agri-Power (not the cheaper built Agri-Master).
ARMSTRONG These are the cheapies but take a good top cut, pull agressively, and usually don't weigh much. They are prone to huge cracking, and I've even seen rubber start peeling off in layers from the case and on the sides of the bars. I love em, some hate em. Moderate quality but good diggers. Titan and Maxi-Trac are newer versions.
FIRESTONE Firestone by far has been the most robust all around tire. Especially the older ones. They will have huge cracks, beat up beads, and keep on going. The "gum dipped" label on the side means something. These include the 45 degree style, ricers, All Traction Field & Road F151, and the mighty Deep Treads (these were nearly indestructable and logged long hours before replacement. Some 23deg tread, Deep treads being the worst offender, wear down in the middle pretty easy (rim width is a factor). But, the thick casing allows for good cuts anyway. Later variations included the lighter plain Field & Road, Traction Field & Road, Heavy Duty Field & Road, and Super All Traction tires with 23 degree tread. They seem to be good quality, but less of a sidewall and more prone to wear or puncture.
ODDBALLS Co-op (usually BFG) General US Royal Alliance Kelly Husky Cambridge Vredestein Gempler's Stomil Wards Riverside etc.
I'd love to hear what other rubber geeks have seen, repaired, swore at, burned, popped, pulled, ground, and used.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: Electronic Ignition - by Staff. Oil, for example has come a long way in the last 50 years and I don't use anything but the latest API grade available. I've heard the arguments for non-detergent oils but would never trade it for today's formulations. Paint is another, the modern acrylic enamels are great for resistance to grease and fuel stains, retaining their shine and they last forever; unlike enamels and lacquers . Still another is the alternator. No doubt using the original generator keeps the tractor pure, but for thos
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.