Winter project

Posted by Fernando Guzman on October 24, 2013 at 05:09:06 from (70.194.6.55):

I am in the process of restoring a 1955 CASE 401while it's in my garage. I live in Michigan and it will be a winter project. I have powerwashed and want to strip old layers of paint to bare metal. There are old rust spots where paint has been missing. I plan on wire wheeling and using "Prep and Etch". Once I do this planned on using etching primer. I then plan painting in the spring. What is the best way to protect what is etch primer? Can I use rattle can primer till I use 2k urethane surfacer primer? I have read earlier post tractor parts need to be at least 60 degrees taking this into consideration. Any help appreciated.

Replies:

• Re: Winter project Scout2008 12:18:37 11/06/13 (1)
  • Re: Winter project FBH44 03:47:57 11/15/13 (0)
• Re: Winter project CNKS 18:04:33 10/24/13 (0)
• Re: Winter project Dick L 13:09:08 10/24/13 (0)
• Re: Winter project showcrop 07:41:58 10/24/13 (2)
  • Re: Winter project Dave SE Mich 10:11:38 10/24/13 (1)
    • Re: Winter project Hadley 11:33:10 10/24/13 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]