If you put the paint in the gun and little or no paint comes out you will know it needs to be thinned. For a gravity feed gun you would probably use it at about 60-70 pounds. I don't have any connection with rustoleum. I'm a professional furniture refinisher. I do use rustoleum paint from time to time.
I can't find anything to support the idea of spraying the paint in 15-20 minute intervals. I looked online for a data sheet and couldn't find one. The only thing I could find is a handling sheet which said what I thought all along that it was just an alkyd enamel. You might look on the can for drying times but if it were me I would not put more than one coat on in a 24 hour period. I think if you would put 3 or 4 coats on in an hour most of it would run off onto the ground. I don't know if you're old enough to remember but the paint is very similar to enamel house paint.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.