Posted by fixerupper on October 19, 2013 at 17:24:56 from (100.42.83.15):
In Reply to: 550 Oliver posted by Janicholson on October 19, 2013 at 16:14:42:
Jim, I thought about mentioning running one hose down from the valve and teeing off at one cylinder but I didn't want to add to the confusion. LOL. If this is a double acting valve one of the top ports, my choice is the front one, could have a hose running to a tee in the line going back to reservoir so the oil would have somewhere to go when that port is pressurized while the lever is pushed ahead to lower the loader. This would save from squealing the relief valve every time the loader is lowered. The fittings would cost half the price of a new single acting valve and besides, it'd be even more complicated so for this case it's probably not a wise choice.
I still have a slight suspicion this is already a single acting valve. If it is, the loader would be twisting and jerking when it's raised. Jim
This post was edited by fixerupper at 17:28:37 10/19/13.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
