Posted by Tim Daley(MI) on May 08, 2013 at 07:07:31 from (96.35.82.247):
In Reply to: oil filter leak posted by steve43 on May 08, 2013 at 06:26:01:
Steve- There are two gaskets on the N oil filter. One under the clamping bolt head and the other is a large rubber one under the cap itself. The small bolt gasket is a hard fibre type and can be bought at any CNH Dealer. Ask for part number 01A-6749. Don't try a steel washer as it won't work. Ten or twelve years ago you would get one in a new oil filter element kit, but they no longer include it. Often times they wear out after many oil changes and will leak. The large Rubber Gasket is usually included in a new filter kit. Some brands won't have it. Get a FRAM CP3 or one from your CNH Dealer to be sure. There is a cheaper FRAM model, CP but it has no little steel handle to help removing when needed. As Soundguy said, be sure all surfaces are clean and free of old gasket material before installing the new one. Take a dab of clean oil on your finger and smear all over the new large rubber gasket before installing.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.