Harely Davidson motorcyles used a gravity feed fuel setup prior to 2006 when fuel injection was first introduced.
HD setup uses a 1/4 turn shut off petcock valve with an integrated filter screen that protrudes up into the fuel tank. The filter screen is cylindrical and fits up through the fitting in the bottom of the fuel tank.
These petcock valves are trouble free and very reliable. There is no glass material.
The HD style petcock shut off valve uses an 3/8" NPT male thread.
Aftermaket petcock valve with filter screen can be had at many motorcycle suppliers.
JP cycles in Anamosa Iowa is one of the best suppliers.
Looking in the JP catalog there are many selections for this style of shut off valve. The least expensive is $15. The output connection is a rubber hose barb fitting.
My tractor is totally torn down from the bell housing forward. Will be replacing the glass sediment bowl setup with an HD style shut off valve.
This will be an upgrade in design, but not authentic, however.
The HD engine displacement is 91 CID compared to N engine at 120CID.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.