Ford 9N, 2N and 8N Discussion Board |
Re: Bush Hog Size for 8N
[ View Follow Ups ] [ Post Followup ] [ Return to Ford 9N, 2N and 8N Discussion Board ]
Posted by Dell (WA) on June 21, 1999 at 09:59:57 from (209.138.218.46):
In Reply to: Bush Hog Size for 8N posted by Yank Yarborough on June 21, 1999 at 09:40:24:
Yank........why don't you "borrow" your neighbor's 6' brush hog and try it out? It just might depend upon what you are mowing. Really tall grass, hay, heavy brush, just take 1/2 a pass. Normal flat land pasture clipping probably no problem, except for rear tire clearance. You might have to widen out your rear tires one notch per the owners manual. Wheather 6' or 5', you should also consider using "limiter chains" to take the weight off your 3-point hydraulics, the chain still allow you to use the hydraulics to lift the mower over things. And also recommend "anti-sway bars" back to the under the fender bracket. I'm pleased to learn you already have an ORC The ORC safety preacher........Dell
Follow Ups:
Post a Followup
|