Ford 9N, 2N & 8N Discussion Board|
Re: Re: Re: Re: Re: Re: Re: Re: Re: #1 is 100 psi dry and 110+ wet.
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Frank Fox on January 06, 2002 at 22:52:35 from (184.108.40.206):
In Reply to: Re: Re: Re: Re: Re: Re: Re: Re: #1 is 100 psi dry and 110+ wet. posted by Rob on January 06, 2002 at 12:59:10:
Ifn you want oil pressure let me tell you how. I have owned my 1951 8N about three weeks. When i first started it the oil pressure gauge (80psi) would peg. I changed the oil and filter and filled the engine with 20/50 oil. Tractor sat for about 3 or 4 years or more before I purchased it. When I started it the oil pressure went over 80psi and kicked the oilfilter gasket out. Oil pressure about 50 psi when hot. Thought maybe it was stuck. The next day when I started it, it again kicked out the filter gasket. Today I removed the relief valve and found TWO not ONE but TWO # 10 nuts in the pocket in the plug, so--- when you screw in the plug it bottoms out the spring and volla 80, 90 or maybe 100PSI. With the nuts removed 45 to 50 psi when cold and 30 to 35 when hot. I will give you a good deal on the #10 nuts. Not recomended!!!!
|Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]|
| Copyright © 1997-2013 Yesterday's Tractor Co.|
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
|About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.|