Posted by Mopower on December 05, 2012 at 07:28:57 from (64.208.152.151):
In Reply to: moline za posted by Gary C S on December 04, 2012 at 09:02:20:
Removing the PTO and it's driving shaft id goot for about 30-40 pounds. I think the belt pulley drive is good for a few more, not to mention the pulley itself. If fenders are required, use the late R fenders. They look great, bolt on, and are much lighter. Run about half the required oil in the tranny. A "red nose" from a ZT is much lighter than the heavy cast tanks and radiator on the ZA. You may not want to change that for looks reasons. The ZT is really a bit lighter. I'm assuming all the hydraulics are already off the tractor. ZAS/ZTS/JTS axles, housings, and hubs are much narrower, therefore much lighter. I'd bet half the weight. My friend did this (minus axle housings) to his ZA and had it to 3600 or so. 3500 takes a bit more work and works much better with a ZT. The lightest I've seen is a 3000# ZT, but it's pretty tricked out. BTW, some brands and styles of tires (and wheels) are ligter than others. That's all I can think of right off the top of my head.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.