Posted by Charlie Bilerx on January 31, 2010 at 15:26:46 from (64.201.85.120):
In Reply to: 4.750 piston posted by steve il on January 31, 2010 at 13:48:00:
steve il,
If you are looking for the M&W/Gould pistons; you may want to broaden your search criteria a bit. Minneapolis-Moline marketed this same series of pistons as #10P2962. Occasionally you may come across this same piston marked as Zollner. Zollner really made all these pistons. They just never marketed them until everyone else stopped selling them. You can mix Zollner, M&W, and Gould pistons in one engine. Just never mix Moline pistons with the other brands. You will not be happy with the results.
Be warned; all of this classic series of aluminum piston, whatever brand, is prone to stress cracks. Make sure you soda blast used pistons and check them for stress cracks from around the outer edge of the top to the first ring groove. This was not a flaw in design. The cracks are caused by the aluminum of the era and detonation. Rubbing and wire brushing will actually hide the cracks.
New 4.751" bore pistons are in the pipeline. Production samples are being made and then they have to be "tested" for a few grueling weeks. Before the flowers bloom; we will be shipping the new pistons.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.