fe35 gas standard

Posted by 2tractors on August 28, 2012 at 13:23:18 from (207.144.5.133):

After replacing the 2 gears and timing chain on the fe35 gas and installing a new line with solder to the banjo fitting on the side of the block I now have no oil to pressure gauge. The line isn't stopped up as air will blow thru.The threaded bolt holding the banjo to block has a flat spot with the threads being adsent and I've tried turning both the bolt and the banjo to see if it's got to be aligned with a hole or something. Anybody got a manual that shows anything about the oil line and banjo fitting?Pressure was good before. 60 lbs.

Replies:

• Re: fe35 gas standard Tony in Mass. 15:29:52 08/29/12 (1)
  • Re: fe35 gas standard 2tractors 06:32:00 08/31/12 (0)
• Re: fe35 gas standard 2tractors 15:31:22 08/28/12 (0)
• Re: fe35 gas standard Tony in Mass. 14:16:57 08/28/12 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]