Posted by MSM on February 17, 2013 at 04:33:12 from (70.192.194.194):
In Reply to: 3010 repower posted by aph620 on February 16, 2013 at 21:09:52:
Basically you will have to use a 3010-3020 engine.The 359 will not work as a bolt in.The 359 is a 6 cylinder,so you will need a longer hood,larger radiator,and a laundry list of other parts. . A non turboed 219-239-or 276 can be adapted in,but it is still alot of work,will require a fair amount of fabricating of frame mounts,and linkages,you will need 4030 bell housing adapter,a 2510 pump stand,new throttle linkage,new tach cable,air cleaner hoses, plus the cost of a 4 cylinder engine. 3010/3020 engines/blocks are out there,but are getting scarce. You could probably buy another rough but good running 3010 for alot less than adapting in another engine.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.