Posted by ohiotractorguy on March 30, 2009 at 13:27:26 from (70.105.98.41):
In Reply to: John Deere 435 posted by OhioTractorGuy on March 29, 2009 at 18:24:55:
Well, was able to get the tractor home and looked it over real good today. I have some thinking to do; seems the dash casting and the timing cover on the motor that bolts up to the torque tube is/are broken as well. Ive been offered the rear cover for a price, and I could kick myself cause I had a dash casting from a 440 awhile back that left on a pile of parts for cheap awhile back. Ill put some feelers out there for those parts. Has decent sheetmetal and looks complete most everywhere else; three point is well used but everything else looks ok. I just dont want it to become one of those projects that gets started and ends up sitting for a number of months. I already have a few of those going now! I will probably take a look in on the transmission and ring/pinion and that will make my decision for me. If all looks good then Ill probably put it back together; if the gears look abused might as well take it apart. Is there much demand out there for a good 2-53 motor? I know the sheetmetal parts would go quite easily, but would like most everything gone if Im going that route. Thanks again for all the input.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
