Re: massey harris sickle bar mower #6?

Posted by Glenn in MI on September 27, 2005 at 18:00:40 from (4.229.237.233):

In Reply to: massey harris sickle bar mower #6? posted by dennisp561 on September 25, 2005 at 11:11:36:

I have a MH No 6 semi-mount mower that I use occasionally. It is designed to bolt to the swinging drawbar hitch that most row-crop tractors were equipped with. On my Oliver 770, I just swing the drawbar all the way to one side, so it lines up with a bolt hole on the mower hitch, and bolt them together. The other side of the mower hitch with the multiple holes lines up with the other side of my tractor hitch frame, and I drop a pin through a matching hole. The reason for the piece with the multiple holes is so you can adjust the angle of the mower bar. The end of the bar should have about 4 inches of "lead".

It wasn't really designed to attach to your Ford, but you may be able to get the mower bolted to your tractor hitch with a little custom engineering.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]