Posted by JD Seller on September 28, 2013 at 17:36:47 from (208.126.196.144):
In Reply to: JD MX10 mower posted by Sako on September 28, 2013 at 16:13:35:
Why are you needing them??? They usually are only used when changing a 2 point hitch to 3 point mount or if your tires need more clearance.
They are part number #25 AW30634 list price is $170.89 each.
They can be bought through whole good in a kit that is #34 BW 14552 cost $115.50. It only shows one needed so I am not sure it you need two kits or just one. The kit includes the pins. If the kit has both sides you can not make them any cheaper than that. Even if you need two they are not real simple to make like the factory ones. You could make a different bracket easier and MAYBE cheaper.
I would check and see if the BW14552 is for both sides. If it is then you can't fool with it for the cost and convenience. You dealer can break the bundle number BW14552 down and see if it includes both sides.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.