JD 214t baler twine knives

Posted by andyd4ntx on July 16, 2013 at 15:10:32 from (67.221.137.35):

I recently acquired a John Deere 214T baler. The baler is old but still working.

I put up 425 bales this past month but we had about 45 or 50 that did not tie on the left hand side, the right hand/inside knotter never misses.

I would like to remove the knife arm assembly to replace or sharpen the twine knives but without removing the whole knotter assembly I can't see how you could get the knife arm out?

How do you sharpen or change the twine knifes?

is there any way to remove the arm assembly without pulling the knotters apart?

I have the operators manual and all the previous owners notes. He kept the old girl in very reasonable shape.

Also did John Deere have anything like a "shop manual or service manual for balers, I am finding that I need more info then the operators manual provides?

Andrew.

Replies:

• Re: JD 214t baler twine knives JD Seller 15:19:09 07/17/13 (0)
• Re: JD 214t baler twine knives andyd4ntx 13:44:53 07/17/13 (0)
• Re: JD 214t baler twine knives old 17:17:59 07/16/13 (2)
  • Re: JD 214t baler twine knives andyd4ntx 11:17:32 07/17/13 (1)
    • Re: JD 214t baler twine knives old 13:05:30 07/17/13 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]