Posted by Bob Bancroft on January 21, 2013 at 06:18:21 from (18.104.22.168):
In Reply to: Chisel Plows posted by Gearhead210 on January 21, 2013 at 05:03:47:
I used to have an eleven shank Glencoe "soil saver". It had three gangs of discs in front. They were a constant hassle. Bearings going bad, discs breaking. I mowed my corn stalks, and yet with the advent of Bt corn, I could still wad up a ball of stalks occasionally. So I shopped for a newer style disc/chisel with three rows of teeth instead of two. I found a nine shank Unverferth "penetrator". It has five little disc gangs mounted on swivels, spring loaded, and on a bar so they can be controlled hydraulically from the tractor seat. Very nice. BUT! Here's the interesting part. I got a newer combine. It has "knife rolls". It obliterates anything that goes down through the rolls! I still mow the remaining stubble. But what I finally realized was the old four row combine was running down the outer two rows, so no matter what I did, I had plenty of full length stalks laying out there flat on the ground. Now the six row head, as I said, destroys all the stalks. I'm sure I could go back to the Glencoe, with all the chisels mounted on two rows. And I can raise the disc gang on the Unverferth and it makes no difference! So- it all depends- on lots of variables!
Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.