Bret, I have been running a CCM185 (I think, never was good at remembrin numbers, LOL) for the last 5-6 seasons. I only cut waterways, pasture fields, and hills, that our tenant farmer does not want to do. I also once cut one of his fields, when he had to have emergency surgery, and couldn't cut one of his fields. So I have cut both unfertilized, and fertilized fields. The CCM mower, in Orchardgrass, and timothy, and fescue, can start cutting earlier than a NH haybine, and dries down a little earlier than the haybine. The only crop I have cut with it, that needs conditioning, is Sorghum/sudax hybrid. That stuff takes 5 days to dry down, conditioned, and more than a week un- conditioned!
I generally cut one day, leave the crop sit a day, then rake the next day. If it is heavy hay, I ted right after cutting. Sometimes, in heavy hay, you have to wait another day, and roll the windrow over, before baling.
The CCM cutter has only 2 cutting heads, which Counter rotate, meaning they throw a mini windrow up as they cut, in the center of the pass. They have 6 reversible cutter knives, a lot like disc mower blades, a complete blade change takes about 15 minutes, Some of the old timers say they cut too short, but you have to keep alert, as these mowers are heavy, they "walk" the toplink adjustment back, extending the link. They don't take much HP to run, but are pretty heavy. I counterweight the opposite wheel, of my ALLIS D-12, and have about 300 lbs weight in the front. Even so, a sack of sugar will lift up the front wheels, if placed on the back of the mower, in transport position!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.