Posted by Hogleg on December 20, 2012 at 05:30:04 from (38.104.162.74):
In Reply to: Vermeer 605 j posted by Ken Hayes on December 19, 2012 at 19:08:01:
I have a 605H, love it. These comments are about the H but assume the J is similar.
Make sure they did not bend the rear gate. If it does not lock down correctly on both sides it will never make a good bale.
Belts are expensive so if there are a lot of splices discount accordingly. You can got to haytools.com to price new belts for that model.
Have them hook it up and make sure all of the hydraulics and electrics (if any) work correctly. Run the belts and feel the bearings to see if any get hot. Be best to actually get to roll a bale but the wrong season for that. There are a bunch of bearings on it but the expensive ones are on the main large roller and the drive sprocket.
Look at the chains and sprockets to see if they are abnormally wearing or loose. IF loose, and the idler is at max, will need to replace chains. Can discount accordingly on that also. If the sprockets are worn, lots more expensive, I would walk away at that point.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.