A stalk cutter does NOT have bushhog type blades, they are all the flail type blade. A mower would be closer spaced flails for a fine cut while the stock chopper would be further apart for more of a corse chop and they would be designed for use on dead material that will bust up easier. Also the flail mower will likely be a 3 point mounted and if it has wheels they will be in back of the unit so they do not run down standing crop where the stock chopper will most likely be a drag type with the wheels on the outer ends where they would run between the rows and there is supposed to be nothing there to run down. Also for cultivated ground where the stock chopper would be used there were different length flails for on top of the cultivator ridges or longer for between the ridges. The early stock choppers the flails ran across the row instead of with the row like the newer ones do and that is the same as the flail mower or the direct cut flail forage harvestor and they were avaible with the different length flails for stock chopping in cultivated ground.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.