Posted by Case Nutty 1660 on December 25, 2012 at 07:01:27 from (75.127.24.27):
In Reply to: case 1060/1160 parts posted by gillet598 on December 24, 2012 at 12:33:18:
Delta I believe has the right number for the feeder chain, as to the floor tin I think you will have a very hard time finding any NOS or reproduction stock, I will assume you are working on a grain hdr as you asked for floor tin, keep this in mind 1000/1010 hdrs will all work and there are a lot of these out there, only differance is the 1000 hdrs have a different carrier yoke size so these will have to be changed out if you intend to use a 1000 hdr, also the 1160 uses a #80 drive chain unlike the others that use #60 but you can change the drive sproket out no problem I do have NOS floor tin that I could get you measurements from but sorry my sets are not for sale hope this helps we all would like some pics of your purchase/progress if you don't mind, I can check out the chain # also but I know that is correct for my 1660 and I do think the 1000/1160 had the same side chains cnt
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.