Garden Tractors Discussion Board|
Re: Adjust Play on Cub Cadet steering box
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jim S. on May 17, 2002 at 05:08:14 from (188.8.131.52):
In Reply to: Adjust Play on Cub Cadet steering box posted by Charles VanScoyk on May 17, 2002 at 00:49:27:
On the side of the box where the arm is that the drag link hooks up to, you will see a nut and screw arrangement. Loosen the nut and turn the screw in a quarter-turn. Then tighten the nut. The "screw" is the cam follower for the steering. They do wear, but sometimes by turning it a quarter-turn, you get a new surface for the steering box worm gear to ride on, and it fixes the problem. Try to resist turning the screw in til it's real tight. It will seem fine, but will fail in use.
If a quarter-turn does not fix the slop, then a rebuild is likely in order. All parts are still available.
Anyone working on their Cub Cadet should have the proper service manual, which explains a great deal at a very reasonable price. Get one shipped to you by calling Cub Cadet at 1-800-800-7310, or see your dealer.
|Fast Shipping! Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]|
| Copyright © 1997-2015 Yesterday's Tractor Co.|
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters