Posted by Kirk-NJ on March 14, 2013 at 02:34:35 from (67.237.5.66):
In Reply to: One arm loader posted by Greg K on March 13, 2013 at 19:43:40:
The bracket for the trans is the same for the standard Ag utility and the row crop models. You will have to measure your mounting box to see if you have the long or short box so you get the proper bracket for your appication. On the short box the bracket is more offset. The flat stock steel could be made. The front bracket is the hard one to obtain. I would check tractor slavage yards, Place an ad, ebay, CL. Since a lot of time tractors are sold and the brackets stay with the tractor I would also look at RC ads to see if the tractor has them and than ask if the owner is interested in selling the brackets separately. In most cases the brackets aren't cheap. Here is a photo of my 950 with the brackets on. You can see the offset trans bracket because my loader has the short box. Some of the guys on this forum have made the front brackets. some may not be pretty but serve the purpose.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.