Re: 3000 tranny in a 4000?

Posted by RodInNS on February 04, 2013 at 11:23:28 from (216.118.158.123):

In Reply to: Re: 3000 tranny in a 4000? posted by Ultradog MN on February 04, 2013 at 10:45:16:

I really do't know if it's there or not... Mabey you can add it. I just know the parts are not there as it sits.

I'd also suggest that you check the transmission output shaft ratios... We know that the SOS rear ends have a different ring/pinion because of the SOS's higher output speed. What you might also find is that the 3000 crashbox has an underdrive output ratio... so you ~could~ be compounding a ratio mismatch... Again, I'm only speculating on that as I don't know for certain on that series of tractor. I DO know that on later models like the 10 series the transmission output ratios is what WAS altered to compensate for varying tire sizes and the actual rear end reduction remained the same on all models in a chassis class....

Rod

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]